mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d39592ff64
qemu/hw/gpio/trace-events

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

34 lines
2.2 KiB
Plaintext
Raw Normal View History

docs: fix references to docs/devel/tracing.rst Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-17 18:16:58 +03:00
# See docs/devel/tracing.rst for syntax documentation.
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral This adds a model of the nRF51 GPIO peripheral. Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations. The pins can be used as input pins with pull-ups or pull-down. Furthermore, three different output driver modes per level are available (disconnected, standard, high-current). The GPIO-Peripheral has a mechanism for detecting level changes which is not featured in this model. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 18:23:47 +03:00
hw/gpio: Add GPIO model for Nuvoton NPCM7xx The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:37 +03:00
# npcm7xx_gpio.c
npcm7xx_gpio_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
npcm7xx_gpio_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
npcm7xx_gpio_set_input(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32
npcm7xx_gpio_set_output(const char *id, int32_t line, int32_t level) "%s line: %" PRIi32 " level: %" PRIi32
npcm7xx_gpio_update_events(const char *id, uint32_t evst, uint32_t even) "%s evst: 0x%08" PRIx32 " even: 0x%08" PRIx32
trace-events: Shorten file names in comments We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-14 21:09:26 +03:00
# nrf51_gpio.c
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral This adds a model of the nRF51 GPIO peripheral. Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations. The pins can be used as input pins with pull-ups or pull-down. Furthermore, three different output driver modes per level are available (disconnected, standard, high-current). The GPIO-Peripheral has a mechanism for detecting level changes which is not featured in this model. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 18:23:47 +03:00
nrf51_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64
nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64
nrf51_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
trace: enforce that every trace-events file has a final newline When generating the trace-events-all file, the build system simply concatenates all the individual trace-events files. If any one of those files does not have a final newline, the printf format string will have the contents of the first line of the next file appended to it, which is usually a '#' comment. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190123120016.4538-3-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-23 15:00:14 +03:00
nrf51_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
hw/riscv: Move sifive_gpio model to hw/gpio This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-03 13:40:15 +03:00
hw/gpio/pl061: Convert DPRINTF to tracepoints Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:09 +03:00
# pl061.c
hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers The Luminary variant of the PL061 has registers GPIOPUR and GPIOPDR which lets the guest configure whether the GPIO lines are pull-up, pull-down, or truly floating. Instead of assuming all lines are pulled high, honour the PUR and PDR registers. For the plain PL061, continue to assume that lines have an external pull-up resistor, as we did before. The stellaris board actually relies on this behaviour -- the CD line of the ssd0323 display device is connected to GPIO output C7, and it is only because of a different bug which we're about to fix that we weren't incorrectly driving this line high on reset and putting the ssd0323 into data mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:13 +03:00
pl061_update(const char *id, uint32_t dir, uint32_t data, uint32_t pullups, uint32_t floating) "%s GPIODIR 0x%x GPIODATA 0x%x pullups 0x%x floating 0x%x"
hw/gpio/pl061: Convert DPRINTF to tracepoints Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:09 +03:00
pl061_set_output(const char *id, int gpio, int level) "%s setting output %d to %d"
pl061_input_change(const char *id, int gpio, int level) "%s input %d changed to %d"
pl061_update_istate(const char *id, uint32_t istate, uint32_t im, int level) "%s GPIORIS 0x%x GPIOIE 0x%x interrupt level %d"
hw/gpio/pl061: Add tracepoints for register read and write Add tracepoints for reads and writes to the PL061 registers. This requires restructuring pl061_read() to only return after the tracepoint, rather than having lots of early-returns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:11 +03:00
pl061_read(const char *id, uint64_t offset, uint64_t r) "%s offset 0x%" PRIx64 " value 0x%" PRIx64
pl061_write(const char *id, uint64_t offset, uint64_t value) "%s offset 0x%" PRIx64 " value 0x%" PRIx64
hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset The PL061 comes out of reset with all its lines configured as input, which means they might need to be pulled to 0 or 1 depending on the 'pullups' and 'pulldowns' properties. Currently we do not assert these lines on reset; they will only be set whenever the guest first touches a register that triggers a call to pl061_update(). Convert the device to three-phase reset so we have a place where we can safely call qemu_set_irq() to set the floating lines to their correct values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:16 +03:00
pl061_reset(const char *id) "%s reset"
hw/gpio/pl061: Convert DPRINTF to tracepoints Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02 13:40:09 +03:00
hw/riscv: Move sifive_gpio model to hw/gpio This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-03 13:40:15 +03:00
# sifive_gpio.c
sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64
sifive_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64
sifive_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
hw/gpio Add GPIO read/write trace event. Add GPIO read/write trace event for aspeed model. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220525053444.27228-2-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 11:31:33 +03:00
# aspeed_gpio.c
aspeed_gpio_read(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64
aspeed_gpio_write(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64
Reference in New Issue Copy Permalink