979b85548d
Rework Line #7 left block. Add preliminary CPUID function to detect CPU Topology
2022-04-16 13:31:28 +02:00
fac6e2a973
Rework the right block of lines 8/9
2022-04-16 13:31:28 +02:00
8f0437c579
Better githash.h generation on Makefile from @martinwhitaker
2022-04-16 13:31:28 +02:00
1afcd08951
Realign cache/memory size & bandwidth on line 3-6 for better readability. Add a new flag in printf to add a space between number in unit in %k mode
2022-04-16 13:31:28 +02:00
5580f7562d
Add tracking & display for maximum CPU Temperature. Make the enable_temperature flag working as expected
2022-04-16 13:31:28 +02:00
272f1ce4f6
Rework line 2. Add placeholder for a dual temperature display (Actual/Max). Paging mode will move to line 7
2022-04-16 13:31:28 +02:00
5f92ff1a64
Rework first line, add build number based on git hash, move 32/64b info to build number, add githash.h to git ignore. A better implementation of Makefile is needed (check if git is present and avoid rebuild (APP)*.c if hash is the same
2022-04-16 13:31:28 +02:00
faa0252e9c
Final title color for maximum readability and to avoid confusion with the commercial Memtest86
2022-04-16 13:31:28 +02:00
32b9ce38e7
Fix early reboot on 32-bit CPUs that don't support long mode (issue #38 )
2022-04-13 20:37:47 +01:00
31f06ea7c8
Add a framebuffer test when EFI debug is enabled.
2022-04-13 14:30:52 +01:00
6e9bdce92d
Select the best mode for the EFI framebuffer.
...
This chooses the lowest resolution that supports our main display.
2022-04-13 14:30:23 +01:00
2cd060b22c
Fix warning about mismatched comparison operands in 32-bit build.
2022-04-13 14:20:46 +01:00
06c2769abe
Tabulation and white space fixes.
2022-04-13 12:13:13 +01:00
9f92ecf761
Fix the remapping of the screen frame buffer.
...
The size of the region to be mapped is determined by the buffer stride,
not the pixel width.
2022-04-11 21:46:49 +01:00
84a54ca083
uhci: use multiple TDs for data transfers larger than the max packet size.
...
Unlike the other USB controllers, a UHCI transfer descriptor can only
request a single packet.
2022-04-11 21:17:09 +01:00
1998ce16d1
Handle 64-bit frame buffer addresses when printing EFI debug info.
2022-04-11 20:00:59 +01:00
ae2c010610
uhci: fix device speed setting when constructing a transfer descriptor.
2022-04-10 11:53:01 +01:00
4c55182cd0
Disable UHCI legacy support and make sure all UHCI registers are initialised.
...
The controller reset should set the USBINTR, FRNUM, and SOF registers to
their default values, but set them explicitly just to be sure.
2022-04-09 22:42:59 +01:00
4761b782dd
Enable detection of keyboards attached to a UHCI controller.
2022-04-07 18:05:45 +01:00
08bbac1065
uhci: reset the queue head after handling a keyboard interrupt.
...
When an interrupt transfer completes, the UHCI loads the QELP in the
QH with the link pointer from the TD (which is a null pointer in this
case). We need to set the QELP back to point at the TD to enable the
next interrupt transfer.
2022-04-07 17:51:27 +01:00
75bc6822f8
uhci: set the link pointer terminate bit in the last TD in a queue.
2022-04-07 17:43:39 +01:00
6cfb7e7e83
Miscellaneous fixes to the UHCI driver.
...
This gets us to the point that a keyboard is detected when running
QEMU with a EHCI/UHCI combination controller and the first keypress
is detected and returned.
2022-04-07 00:31:59 +02:00
43302bf193
Add SPD decoding for DDR memory modules
2022-04-06 23:55:38 +02:00
2c33aa3e85
Check for correct address space in probe_usb_controller() (issue #36 ).
...
We expect UHCI controllers to be mapped into I/O space and the other
controller types to be mapped into Memory space. Print a diagnostic
message and abort if this is not the case. Only call map_region()
for controllers mapped into Memory space.
2022-04-06 20:46:08 +01:00
f14d1fed52
Really add the noehci boot command line option.
...
(file missed in last commit)
2022-04-06 17:31:47 +01:00
711596edbb
Add boot command line option to ignore any EHCI controllers.
2022-04-04 22:53:39 +01:00
2e048a7c61
Add support for Serial/TTY ( #32 )
...
* Add preliminary support for TTY Serial/UART (#15 )
* Use shadow_buffer instead of VGA buffer to get a framebuffer-agnostic TTY supprot
* Added menu browsing & inputs from Serial TTY (#15 )
* Add fix for degree symbol on TTY. Correct serial.c & serial.h file created with CRLF (#15 )
* Move tty_error_redraw() to insure correct redraw when a error occurs
* Many reindent / cleanup
* Various optimization from @martinwhitaker comments
2022-04-04 18:31:54 +02:00
5cc72a6bed
Fix up the SMBIOS parser so that it doesn't perform all kinds of OOB accesses when dealing with invalid input. ( #26 )
2022-04-02 15:43:46 +02:00
95c49848c8
Use the PRC status bit to detect when an XHCI port reset is complete (issue #31 ).
...
Some controllers do not set the PR status bit immediately after it's written,
so polling that to detect when the reset is complete is unsafe.
2022-04-02 09:28:34 +01:00
bbfaf10240
Revert "Correct the minimum recovery time needed to reset the XHCI port ( #31 )"
...
This reverts commit a95c554c6b
2022-04-02 09:21:30 +01:00
a95c554c6b
Correct the minimum recovery time needed to reset the XHCI port ( #31 )
2022-04-01 22:06:01 +02:00
ee80684c4f
Separate benchmark from smbus/smbios and add a separate flag to enable/disable it
2022-04-01 20:34:52 +02:00
4a20637f8e
Add support for AMD Cezanne APU (Ryzen 5000G) #21
2022-04-01 18:55:43 +02:00
d356a7e3f0
Parse MADT table header with the correct struct ( #29 )
2022-04-01 13:46:04 +02:00
c13bb30893
Fix mapping of MADT (issue #29 )
...
We need to pass the physical address of the MADT to parse_madt(), not the
virtual address of the table signature, because parse_madt() needs to call
map_region() again to ensure the full table is mapped into virtual memory.
2022-04-01 10:22:25 +01:00
5249ae0af7
Merge pull request #27 from memtest86plus/usb_size_optimization
...
Small optimizations in the EHCI code
2022-03-31 01:10:35 +02:00
e0d42db07c
Optimize the code by declaring several functions static in system/ehci.c.
...
`size memtest_shared` indicates that this saves 200- (x86) / 200+ (x86_64) bytes, but alignment hides the gain.
2022-03-30 11:54:56 +02:00
b6e2a2ace8
Attempt to fix another issue related to #19 by adding a BENCH_MIN_START_ADR constant to force bench location > 16MB in all cases. Correct mem_test_len by adding a x2 multiplier (len=src+dst)
2022-03-29 00:42:34 +02:00
a4f1ba37b3
Add support for AMD Ryzen FCH ( #21 )
2022-03-27 23:47:57 +02:00
f7ae4dd395
Add support for Zhaoxin ZX-E & KX CPUs
2022-03-25 20:14:16 +01:00
88017f007f
Add preliminary support for XMP3 on DDR5 ( #23 ). Fix an issue with wrong SPD values on DDR5 ES modules
2022-03-25 00:33:42 +01:00
aaa2061aec
Fix an issue with DDR5 capacity detection
2022-03-24 21:49:56 +01:00
b22c032b5a
Add support for DDR5 in smbus.c. Major rework of various related functions ( #2 )
2022-03-24 21:49:56 +01:00
8e35753ce8
Fix attempt for benchmark memory allocation ( #19 )
2022-03-24 21:49:56 +01:00
b4bab4f829
Add decoding of DMI structure 17 as helper for SPD decoding. Move DMI display function to disaply.h
2022-03-24 21:49:56 +01:00
d38df135db
Update README.md before going public
2022-03-24 21:49:56 +01:00
fa206bb865
Added DDR2 SPD decoding ( #2 )
2022-03-24 21:49:56 +01:00
ec1a880288
Reset methods re-ordering (proven more universal for BIOS/UEFI as an attempt to solve #17 )
2022-03-24 21:49:56 +01:00
bd5e6f3c6b
Bring back the cache & memory benchmark feature (preliminary)
2022-03-24 21:49:56 +01:00
6e57ffec34
Added a lot of modern IMC from Intel's BDW (5th gen) to RPL (13th gen)
2022-03-24 21:49:56 +01:00
Sam Demeulemeester