* src/cache/ftcbasic.c (FTC_BasicAttrRec): Match type of `load_flags`
to its main purpose in `FT_Load_Glyph`.
(FTC_ImageCache_Lookup{,Scaler},FTC_SBitCache_Lookup{,Scaler}): Updated.
Manipulate the cache after a face is requested or a size is looked up
successfully. Fixes#1270.
* src/cache/ftcmanag.c (ftc_size_node_init, ftc_size_node_reset,
ftc_face_node_init): Check for errors before accepting a change.
* src/cache/ftcmru.c (FTC_MruList_New): Do nothing if reset fails.
With horizontal bisections, the smallest section is a whole single
scanline. Almost horizontal lines or other complex scanlines can
easily overflow the rendering pool. Switching to vertical bisections
splits the scanlines and should rule out the overflows. Fixes#1269.
* src/smooth/ftgrays.c (gray_convert_glyph): Bisect vertically.
When creating a CID parser the location of the 'StartData' or '/sfnts'
tokens needs to be known. However, the token parser requires that the
entire document be in memory and flattening the entire stream into memory is
to be avoided.
To avoid forcing the entire stream into memory, previously this code would
scan through the stream looking for 'StartData' or '/sfnts' as strings.
However, these strings could have been in a comment or string token, so the
stream would be read into memory up to that point and the parser run to
check that these strings were actually tokens. This forced a parser restart
from the beginning each time; as a result, data with many 'StartData'
non-tokens would take n^2 time to check.
* src/cid/cidparse.c (cid_parser_new): Change algorithm to make the initial
scan look for the last possible 'StartData' or '/sfnts' string in the
stream. The stream is read forward instead of backward as a typical normal
CID font will have one 'StartData' toward the beginning of the data and it
it much faster to read the data from beginning to end instead of end to
beginning. For memory-based fonts the limit is set to the end of the stream
since the stream is already in memory. Then the parser is run once to look
for 'StartData' or '/sfnts' tokens. If they are found the parser is re-set
to reflect this new information.
Reported as
https://issues.chromium.org/issues/40201695
For default variable instances `cff_face_init` did not set the blend. This
mostly worked as later use of the unset blend produced the default
variation. However, if a user called `TT_Get_MM_Var` the blend would be
partially set up, but not fully. In particular the number of axes, the axis
definitions, and the instance locations would be set up, but not the current
instance location (`coords` and `normalizedcoords`). This could lead to the
default instances of CFF2 fonts erroring on any use of `blend`.
Ensure the default variable instance is fully set up by always calling
`FT_Set_Named_Instance` on a variable face.
* src/cff/cffobjs.c (cff_face_init): Call `FT_Set_Named_Instance` on
default instances.
* src/truetype/ttobjs.c (tt_face_init): Ditto.
Fixes#1268.
This commit adds support for kerning from 'GPOS' tables, while maintaining
support for basic 'kern' tables. `FT_HAS_KERNING` will be true for a font
with either available and `FT_Get_Kerning` will still use the basic 'kern'
table data if avilable, otherwise check the GPOS 'kern' feature.
This feature is disabled by default; it can be enabled with the
`TT_CONFIG_OPTION_GPOS_KERNING` flag.
Only basic kerning (pair positioning with just an x advance) is supported
from the GPOS layout features; support for that was added to make the
existing `FT_Get_Kerning` API more consistently functional. FreeType does
not intend to extend itself to further GPOS functionality though; a
higher-level library like HarfBuzz can be used instead for that.
* include/freetype/config/ftoption.h, include/devel/ftoption.h
(TT_CONFIG_OPTION_GPOS_KERNING): New configuration option.
* include/freetype/internal/fttrace.h: Add `ttgpos` trace handler.
* include/freetype/internal/sfnt.h (SFNT_Interface): Add `load_gpos` and
`get_gpos_kerning` fields.
(FT_DEFINE_SFNT_INTERFACE): Updated.
* include/freetype/internal/tttypes.h: Include `fttypes.h`.
(TT_FaceRec) [TT_CONFIG_OPTION_GPOS_KERNING]: Add `gpos_table` and
`gpos_kerning_available` fields.
* src/sfnt/ttgpos.c, src/sfnt/ttgpos.h: New files.
* src/sfnt/sfdriver.c [TT_CONFIG_OPTION_GPOS_KERNING]: Include `ttgpos.h`.
(sfnt_interface): Updated.
* src/sfnt/sfnt.c: Include `ttgpos.c`.
* src/sfnt/sfobjs.c [TT_CONFIG_OPTION_GPOS_KERNING]: Include `ttgpos.h`.
(sfnt_load_face) [TT_CONFIG_OPTION_GPOS_KERNING]: Load and free GPOS kerning
data; check GPOS kerning availability.
* src/truetype/ttdriver.c (tt_get_kerning): Use GPOS kerning if there's no
'kern' table.
As a result of 7b308a29dd, the regular 64-bit execution is now faster
than SSE2. The rendering speed of script fonts at 64 ppem or larger is
improved by about 3% without SSE2. See !314 for the testing results.
* src/smooth/ftgrays.c (gray_render_conic)[FT_INT64]: Remove SSE2 code.
A font has surfaced with `post` version 1.0 and fewer than 258 glyphs.
Its glyphs did not correspond to their names. We now reject such `post`
strictly following specifications.
* src/sfnt/ttpost.c (tt_face_get_ps_name): Check the number of glyphs
for version 1.0.
Reported as
https://bugs.chromium.org/p/chromium/issues/detail?id=1505216
* src/sfnt/ttcolr.c (find_base_glyph_v1_record): Guard access of the search
pointer during binary search. The pointer needs to be checked as we go as
the test that compares number of v1 glyphs with table size at the time of
loading the table is not sufficient on its own.
A scenario is possible in which the `BaseGlyphRecord` list extends into
non-`BaseGlyphRecord` parts of the 'COLR' v1 table (but passed the size
comparison check). Then, at those locations, invalid glyph ID values are
read and may provoke an invalid read due to reassigning min and max values
during the binary search.
This is a follow-up to commit 26a7f047,
[cff] Make blend operator work with floats in private dicts.
which addressed the 'party baseline' bug. However, the reporting user
indicated that the default location and some other points in design space
rendered OK, but other points in design space still had problems. The most
obvious issue being that the x-heights of lower-case letters did not align;
see
https://github.com/adobe-fonts/source-serif/issues/121#issuecomment-1773794136
After some analysis we determined that this was due to an interaction
between `BlueValue` rounding and the zone-based algorithm. In short, for a
point to be considered in a zone it must fall within the bounds of the zone.
(There is a slop factor in some cases, but only a very small one.) In the
Adobe-contributed side of the code, point values are not integer-rounded,
instead they're kept as (some form of) fixed. Rounding just the `BlueValues`
means that points that need to be considered within a zone will fall outside
of it at some points in design space.
The majority of this patch changes the storage and parsing of `BlueValues`
to keep them as `FT_Fixed`. No significant code changes were needed because
the values are converted to `Fixed` anyway when stored in `CF_BlueRec`. No
attempt was made to address problems in the older pshinter code beyond
converting the values from `FT_Fixed` to `FT_Short` when copying the private
dictionary. (However, as the point values are also rounded in that code,
the problem is much less likely to occur, although inconsistency between
rounding and truncation could cause an analogous problem.)
* include/freetype/internal/cfftypes.h (CFF_PrivateRec): Use `FT_Fixed` for
`blue_values`, `other_blues`, `family_blues`, and `family_other_blues`.
* src/cff/cffload.c (cff_blend_doBlend): Updated.
* src/cff/cffobjs.c (CFF_fixedToInt): New macro.
(cff_make_private_dict): Use it.
* src/cff/cffparse.h (cff_kind_delta_fixed): New enum value.
* src/cff/cffparse.c (do_fixed): Updated.
(CFF_FIELD_DELTA, CFF_FIELD_DELTA_FIXED, CFF_DELTA_KIND): New set of macros,
replacing `CFF_FIELD_DELTA`.
(cff_parser_run): Updated to handle fixed-float deltas.
* src/cff/cfftoken.h: Updated to use `CFF_FIELD_DELTA_FIXED` for blue
values.
* src/psaux/psblues.c (cf2_blueToFixed): Removed, no longer needed.
(cf2_blues_init): Updated.
* src/pxaux/psft.c, src/pxaux/psft.h (cf2_getBlueValues, cf2_getOtherBlues,
cf2_getFamilyBlues, cf2_getFamilyOtherBlues): Updated signatures.
* src/psaux/psobjs.c (t1_make_subfont): Updated.
MSBuild.exe can now be fired from the root folder without options.
* builds/windows/vc2010/freetype.sln: Relocated to...
* MSBuild.sln: ... here with minor changes.
* MSBuild.rsp: New file with command line options.
* docs/INSTALL: Reference `MSBuild.sln`.
While it is recommended to have an explicit point at each curve
extrema, they might be missing or outline could be rotated. This
leads to excessive bisections in raster to find them. This change
helps to decrease the number of bisections. The scanline
intersections remain monotonous, of course.
* src/raster/ftraster.c (Conic_To, Cubic_To): Check that control
points cross the scanlines to bisect.
This reduces the code duplication.
* src/raster/ftraster.c (Function_Sweep_Span): Change signature.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop): Focus on pixel setting
and move duplicated the dropout control logic to...
(Draw_Sweep): ... this function and refactor.
(Vertical_Sweep_Span, Horizontal_Sweep_Span): Minor.
This results in noticeable performance improvement.
* src/raster/ftraster.c (Insert_Y_Turns): All bottom y-turns are still
sorted and stored; only the maximum top y-turn is recorded now. The
function is renamed.
(End_Profile): Updated accordingly.
(Convert_Glyph): Reserve space for the top value.
