Most SDL functions used to indicate success or failure using an int return code. These functions have been changed to return SDL_bool.
Here is a coccinelle patch to change code that previously compared the return value to 0 and changes it to a boolean test:
@ bool_return_type @
identifier func =~ "^(SDL_AddEventWatch|SDL_AddHintCallback|SDL_AddSurfaceAlternateImage|SDL_AddVulkanRenderSemaphores|SDL_BindAudioStream|SDL_BindAudioStreams|SDL_BlitSurface|SDL_BlitSurface9Grid|SDL_BlitSurfaceScaled|SDL_BlitSurfaceTiled|SDL_BlitSurfaceTiledWithScale|SDL_BlitSurfaceUnchecked|SDL_BlitSurfaceUncheckedScaled|SDL_CaptureMouse|SDL_ClearAudioStream|SDL_ClearClipboardData|SDL_ClearComposition|SDL_ClearError|SDL_ClearProperty|SDL_ClearSurface|SDL_CloseIO|SDL_CloseStorage|SDL_ConvertAudioSamples|SDL_ConvertEventToRenderCoordinates|SDL_ConvertPixels|SDL_ConvertPixelsAndColorspace|SDL_CopyFile|SDL_CopyProperties|SDL_CopyStorageFile|SDL_CreateDirectory|SDL_CreateStorageDirectory|SDL_CreateWindowAndRenderer|SDL_DateTimeToTime|SDL_DestroyWindowSurface|SDL_DetachVirtualJoystick|SDL_DisableScreenSaver|SDL_EnableScreenSaver|SDL_EnumerateDirectory|SDL_EnumerateProperties|SDL_EnumerateStorageDirectory|SDL_FillSurfaceRect|SDL_FillSurfaceRects|SDL_FlashWindow|SDL_FlipSurface|SDL_FlushAudioStream|SDL_FlushRenderer|SDL_GL_DestroyContext|SDL_GL_GetAttribute|SDL_GL_GetSwapInterval|SDL_GL_LoadLibrary|SDL_GL_MakeCurrent|SDL_GL_SetAttribute|SDL_GL_SetSwapInterval|SDL_GL_SwapWindow|SDL_GetAudioDeviceFormat|SDL_GetAudioStreamFormat|SDL_GetCameraFormat|SDL_GetClosestFullscreenDisplayMode|SDL_GetCurrentRenderOutputSize|SDL_GetCurrentTime|SDL_GetDXGIOutputInfo|SDL_GetDateTimeLocalePreferences|SDL_GetDisplayBounds|SDL_GetDisplayUsableBounds|SDL_GetGDKDefaultUser|SDL_GetGDKTaskQueue|SDL_GetGamepadSensorData|SDL_GetGamepadTouchpadFinger|SDL_GetHapticEffectStatus|SDL_GetJoystickBall|SDL_GetMasksForPixelFormat|SDL_GetPathInfo|SDL_GetRectUnion|SDL_GetRectUnionFloat|SDL_GetRenderClipRect|SDL_GetRenderColorScale|SDL_GetRenderDrawBlendMode|SDL_GetRenderDrawColor|SDL_GetRenderDrawColorFloat|SDL_GetRenderLogicalPresentation|SDL_GetRenderLogicalPresentationRect|SDL_GetRenderOutputSize|SDL_GetRenderSafeArea|SDL_GetRenderScale|SDL_GetRenderVSync|SDL_GetRenderViewport|SDL_GetSensorData|SDL_GetStorageFileSize|SDL_GetStoragePathInfo|SDL_GetSurfaceAlphaMod|SDL_GetSurfaceBlendMode|SDL_GetSurfaceClipRect|SDL_GetSurfaceColorKey|SDL_GetSurfaceColorMod|SDL_GetTextInputArea|SDL_GetTextureAlphaMod|SDL_GetTextureAlphaModFloat|SDL_GetTextureBlendMode|SDL_GetTextureColorMod|SDL_GetTextureColorModFloat|SDL_GetTextureScaleMode|SDL_GetTextureSize|SDL_GetWindowAspectRatio|SDL_GetWindowBordersSize|SDL_GetWindowMaximumSize|SDL_GetWindowMinimumSize|SDL_GetWindowPosition|SDL_GetWindowRelativeMouseMode|SDL_GetWindowSafeArea|SDL_GetWindowSize|SDL_GetWindowSizeInPixels|SDL_GetWindowSurfaceVSync|SDL_HideCursor|SDL_HideWindow|SDL_Init|SDL_InitHapticRumble|SDL_InitSubSystem|SDL_LoadWAV|SDL_LoadWAV_IO|SDL_LockAudioStream|SDL_LockProperties|SDL_LockSurface|SDL_LockTexture|SDL_LockTextureToSurface|SDL_MaximizeWindow|SDL_MinimizeWindow|SDL_MixAudio|SDL_OpenURL|SDL_OutOfMemory|SDL_PauseAudioDevice|SDL_PauseAudioStreamDevice|SDL_PauseHaptic|SDL_PlayHapticRumble|SDL_PremultiplyAlpha|SDL_PremultiplySurfaceAlpha|SDL_PushEvent|SDL_PutAudioStreamData|SDL_RaiseWindow|SDL_ReadStorageFile|SDL_ReadSurfacePixel|SDL_ReadSurfacePixelFloat|SDL_RegisterApp|SDL_ReloadGamepadMappings|SDL_RemovePath|SDL_RemoveStoragePath|SDL_RemoveTimer|SDL_RenamePath|SDL_RenameStoragePath|SDL_RenderClear|SDL_RenderCoordinatesFromWindow|SDL_RenderCoordinatesToWindow|SDL_RenderFillRect|SDL_RenderFillRects|SDL_RenderGeometry|SDL_RenderGeometryRaw|SDL_RenderLine|SDL_RenderLines|SDL_RenderPoint|SDL_RenderPoints|SDL_RenderPresent|SDL_RenderRect|SDL_RenderRects|SDL_RenderTexture|SDL_RenderTexture9Grid|SDL_RenderTextureRotated|SDL_RenderTextureTiled|SDL_RequestAndroidPermission|SDL_RestoreWindow|SDL_ResumeAudioDevice|SDL_ResumeAudioStreamDevice|SDL_ResumeHaptic|SDL_RumbleGamepad|SDL_RumbleGamepadTriggers|SDL_RumbleJoystick|SDL_RumbleJoystickTriggers|SDL_RunHapticEffect|SDL_SaveBMP|SDL_SaveBMP_IO|SDL_SendAndroidMessage|SDL_SendGamepadEffect|SDL_SendJoystickEffect|SDL_SendJoystickVirtualSensorData|SDL_SetAppMetadata|SDL_SetAppMetadataProperty|SDL_SetAudioDeviceGain|SDL_SetAudioPostmixCallback|SDL_SetAudioStreamFormat|SDL_SetAudioStreamFrequencyRatio|SDL_SetAudioStreamGain|SDL_SetAudioStreamGetCallback|SDL_SetAudioStreamInputChannelMap|SDL_SetAudioStreamOutputChannelMap|SDL_SetAudioStreamPutCallback|SDL_SetBooleanProperty|SDL_SetClipboardData|SDL_SetClipboardText|SDL_SetCursor|SDL_SetFloatProperty|SDL_SetGamepadLED|SDL_SetGamepadMapping|SDL_SetGamepadPlayerIndex|SDL_SetGamepadSensorEnabled|SDL_SetHapticAutocenter|SDL_SetHapticGain|SDL_SetJoystickLED|SDL_SetJoystickPlayerIndex|SDL_SetJoystickVirtualAxis|SDL_SetJoystickVirtualBall|SDL_SetJoystickVirtualButton|SDL_SetJoystickVirtualHat|SDL_SetJoystickVirtualTouchpad|SDL_SetLinuxThreadPriority|SDL_SetLinuxThreadPriorityAndPolicy|SDL_SetLogPriorityPrefix|SDL_SetMemoryFunctions|SDL_SetNumberProperty|SDL_SetPaletteColors|SDL_SetPointerProperty|SDL_SetPointerPropertyWithCleanup|SDL_SetPrimarySelectionText|SDL_SetRenderClipRect|SDL_SetRenderColorScale|SDL_SetRenderDrawBlendMode|SDL_SetRenderDrawColor|SDL_SetRenderDrawColorFloat|SDL_SetRenderLogicalPresentation|SDL_SetRenderScale|SDL_SetRenderTarget|SDL_SetRenderVSync|SDL_SetRenderViewport|SDL_SetScancodeName|SDL_SetStringProperty|SDL_SetSurfaceAlphaMod|SDL_SetSurfaceBlendMode|SDL_SetSurfaceColorKey|SDL_SetSurfaceColorMod|SDL_SetSurfaceColorspace|SDL_SetSurfacePalette|SDL_SetSurfaceRLE|SDL_SetTLS|SDL_SetTextInputArea|SDL_SetTextureAlphaMod|SDL_SetTextureAlphaModFloat|SDL_SetTextureBlendMode|SDL_SetTextureColorMod|SDL_SetTextureColorModFloat|SDL_SetTextureScaleMode|SDL_SetThreadPriority|SDL_SetWindowAlwaysOnTop|SDL_SetWindowAspectRatio|SDL_SetWindowBordered|SDL_SetWindowFocusable|SDL_SetWindowFullscreen|SDL_SetWindowFullscreenMode|SDL_SetWindowHitTest|SDL_SetWindowIcon|SDL_SetWindowKeyboardGrab|SDL_SetWindowMaximumSize|SDL_SetWindowMinimumSize|SDL_SetWindowModalFor|SDL_SetWindowMouseGrab|SDL_SetWindowMouseRect|SDL_SetWindowOpacity|SDL_SetWindowPosition|SDL_SetWindowRelativeMouseMode|SDL_SetWindowResizable|SDL_SetWindowShape|SDL_SetWindowSize|SDL_SetWindowSurfaceVSync|SDL_SetWindowTitle|SDL_SetiOSAnimationCallback|SDL_ShowAndroidToast|SDL_ShowCursor|SDL_ShowMessageBox|SDL_ShowSimpleMessageBox|SDL_ShowWindow|SDL_ShowWindowSystemMenu|SDL_StartTextInput|SDL_StartTextInputWithProperties|SDL_StopHapticEffect|SDL_StopHapticEffects|SDL_StopHapticRumble|SDL_StopTextInput|SDL_SyncWindow|SDL_TimeToDateTime|SDL_TryLockMutex|SDL_TryLockRWLockForReading|SDL_TryLockRWLockForWriting|SDL_TryWaitSemaphore|SDL_UnlockAudioStream|SDL_UpdateHapticEffect|SDL_UpdateNVTexture|SDL_UpdateTexture|SDL_UpdateWindowSurface|SDL_UpdateWindowSurfaceRects|SDL_UpdateYUVTexture|SDL_Vulkan_CreateSurface|SDL_Vulkan_LoadLibrary|SDL_WaitConditionTimeout|SDL_WaitSemaphoreTimeout|SDL_WarpMouseGlobal|SDL_WriteStorageFile|SDL_WriteSurfacePixel|SDL_WriteSurfacePixelFloat)$";
@@
(
func(
...
)
- == 0
|
- func(
+ !func(
...
)
- < 0
|
- func(
+ !func(
...
)
- != 0
|
- func(
+ !func(
...
)
- == -1
)
This lets apps optionally have a handful of callbacks for their entry points instead of a single main function. If used, the actual main/SDL_main/whatever entry point will be implemented in the single-header library SDL_main.h and the app will implement four separate functions:
First:
int SDL_AppInit(int argc, char **argv);
This will be called once before anything else. argc/argv work like they always do. If this returns 0, the app runs. If it returns < 0, the app calls SDL_AppQuit and terminates with an exit code that reports an error to the platform. If it returns > 0, the app calls SDL_AppQuit and terminates with an exit code that reports success to the platform. This function should not go into an infinite mainloop; it should do any one-time startup it requires and then return.
Then:
int SDL_AppIterate(void);
This is called over and over, possibly at the refresh rate of the display or some other metric that the platform dictates. This is where the heart of your app runs. It should return as quickly as reasonably possible, but it's not a "run one memcpy and that's all the time you have" sort of thing. The app should do any game updates, and render a frame of video. If it returns < 0, SDL will call SDL_AppQuit and terminate the process with an exit code that reports an error to the platform. If it returns > 0, the app calls SDL_AppQuit and terminates with an exit code that reports success to the platform. If it returns 0, then SDL_AppIterate will be called again at some regular frequency. The platform may choose to run this more or less (perhaps less in the background, etc), or it might just call this function in a loop as fast as possible. You do not check the event queue in this function (SDL_AppEvent exists for that).
Next:
int SDL_AppEvent(const SDL_Event *event);
This will be called once for each event pushed into the SDL queue. This may be called from any thread, and possibly in parallel to SDL_AppIterate. The fields in event do not need to be free'd (as you would normally need to do for SDL_EVENT_DROP_FILE, etc), and your app should not call SDL_PollEvent, SDL_PumpEvent, etc, as SDL will manage this for you. Return values are the same as from SDL_AppIterate(), so you can terminate in response to SDL_EVENT_QUIT, etc.
Finally:
void SDL_AppQuit(void);
This is called once before terminating the app--assuming the app isn't being forcibly killed or crashed--as a last chance to clean up. After this returns, SDL will call SDL_Quit so the app doesn't have to (but it's safe for the app to call it, too). Process termination proceeds as if the app returned normally from main(), so atexit handles will run, if your platform supports that.
The app does not implement SDL_main if using this. To turn this on, define SDL_MAIN_USE_CALLBACKS before including SDL_main.h. Defines like SDL_MAIN_HANDLED and SDL_MAIN_NOIMPL are also respected for callbacks, if the app wants to do some sort of magic main implementation thing.
In theory, on most platforms these can be implemented in the app itself, but this saves some #ifdefs in the app and lets everyone struggle less against some platforms, and might be more efficient in the long run, too.
On some platforms, it's possible this is the only reasonable way to go, but we haven't actually hit one that 100% requires it yet (but we will, if we want to write a RetroArch backend, for example).
Using the callback entry points works on every platform, because on platforms that don't require them, we can fake them with a simple loop in an internal implementation of the usual SDL_main.
The primary way we expect people to write SDL apps is with SDL_main, and this is not intended to replace it. If the app chooses to use this, it just removes some platform-specific details they might have to otherwise manage, and maybe removes a barrier to entry on some future platform.
Fixes#6785.
Reference PR #8247.
This is meant to offer a simplified API for people that are either migrating
directly from SDL2 with minimal effort or just want to make noise without
any of the fancy new API features.
Users of this API can just deal with a single SDL_AudioStream as their only
object/handle into the audio subsystem.
They are still allowed to open multiple devices (or open the same device
multiple times), but cannot change stream bindings on logical devices opened
through this function.
Destroying the single audio stream will also close the logical device behind
the scenes.
Zombie devices just sit there doing nothing until a new default device
is chosen, and then they migrate all their logical devices before being
destroyed.
This lets the system deal with the likely outcome of a USB headset being
the default audio device, and when its cable is yanked out, the backend
will likely announce this _before_ it chooses a new default (or, perhaps,
the only device in the system got yanked out and there _isn't_ a new
default to be had until the user plugs the cable back in).
This lets the audio device hold on without disturbing the app until it can
seamlessly migrate audio, and it also means the backend does not have to
be careful in how it announces device events, since SDL will manage the
time between a device loss and its replacement.
Note that this _only_ applies to things opened as the default device
(SDL_AUDIO_DEVICE_DEFAULT_OUTPUT, etc). If those USB headphones are the
default, and one SDL_OpenAudioDevice() call asked for them specifically and
the other just said "give me the system default," the explicitly requested
open will get a device-lost notification immediately. The other open will
live on as a zombie until it can migrate to the new default.
This drops the complexity of the PulseAudio hotplug thread dramatically,
back to what it was previously, since it no longer needs to fight against
Pulse's asychronous nature, but just report device disconnects and new
default choices as they arrive.
loopwave has been updated to not check for device removals anymore; since
it opens the default device, this is now managed for it; it no longer
needs to close and reopen a device, and as far as it knows, the device
is never lost in the first place.
I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base.
In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted.
The script I ran for the src directory is added as build-scripts/clang-format-src.sh
This fixes:
#6592#6593#6594
* Add braces after if conditions
* More add braces after if conditions
* Add braces after while() conditions
* Fix compilation because of macro being modified
* Add braces to for loop
* Add braces after if/goto
* Move comments up
* Remove extra () in the 'return ...;' statements
* More remove extra () in the 'return ...;' statements
* More remove extra () in the 'return ...;' statements after merge
* Fix inconsistent patterns are xxx == NULL vs !xxx
* More "{}" for "if() break;" and "if() continue;"
* More "{}" after if() short statement
* More "{}" after "if () return;" statement
* More fix inconsistent patterns are xxx == NULL vs !xxx
* Revert some modificaion on SDL_RLEaccel.c
* SDL_RLEaccel: no short statement
* Cleanup 'if' where the bracket is in a new line
* Cleanup 'while' where the bracket is in a new line
* Cleanup 'for' where the bracket is in a new line
* Cleanup 'else' where the bracket is in a new line
I ran this script in the include directory:
```sh
sed -i '' -e 's,#include "\(SDL.*\)",#include <SDL3/\1>,' *.h
```
I ran this script in the src directory:
```sh
for i in ../include/SDL3/SDL*.h
do hdr=$(basename $i)
if [ x"$(echo $hdr | egrep 'SDL_main|SDL_name|SDL_test|SDL_syswm|SDL_opengl|SDL_egl|SDL_vulkan')" != x ]; then
find . -type f -exec sed -i '' -e 's,#include "\('$hdr'\)",#include <SDL3/\1>,' {} \;
else
find . -type f -exec sed -i '' -e '/#include "'$hdr'"/d' {} \;
fi
done
```
Fixes https://github.com/libsdl-org/SDL/issues/6575
As well as reducing duplication, this lets the tests load their resources
from the SDL_GetBasePath() on platforms that support it, which is useful
if the tests are compiled along with the rest of SDL and installed below
/usr as manual tests, similar to GNOME's installed-tests convention.
Thanks to Ozkan Sezer for the OS/2 build glue.
Co-authored-by: Ozkan Sezer <sezeroz@gmail.com>
Signed-off-by: Simon McVittie <smcv@collabora.com>
Sam Lantinga