- sense code ASC_ILLEGAL_OPCODE added for unimplemented/unknown ATAPI commands
- some panics changed to errors
- unsupported bits message in drive and head register changed to BX_DEBUG
- improved info about not existing drive
- indent mode fixed in ATAPI packet command section
- removed obsolete parameters for usb1 and pnic (now assigned by the PCI BIOS)
- PCI base address register mechanism now leaves the flags untouched
- missing reset of pnic options added
- cmos image options renamed
- new cmos option controls the usage of the RTC values from image
- report time0 in use after handling the cmos image stuff
- MSVC warning fixed
the shortcut script .conf.win32-vcpp
- updated list of include files for the gui directory in both workspaces
- added check for BX_WITH_NOGUI in nogui.cc (needed for MSVC)
- updated description of the siminterface implementation
* added hack to detect GTK 2 and set include path
* don't use obsolete wxNotebookSizer
* TODO: wxGTK version is still buggy (wrong dialogs when pressing toolbar buttons)
- updated version number and strings
dummy interface are now disabled if the extension isn't set to "vbe"
- writing charmap data in graphics mode now supported (SF patch #1059199)
- fixed set_ask_format() for the mouse type option
- ne2k and sb16 config lines now support the parameter "enabled=0|1"
- config parser code for ne2k and pnic now working the same way
- ne2k enable option now present in config menu / dialog
- fixed pcidev targets in iodev/Makefile.in
- updated all Makefile dependencies using a default setup (.conf.linux).
TODO: dependencies should be generated at compile time since they depend on
the config settings
#1079240 by Ben Lunt. There are still some problems:
- PS/2 mouse is always present (some code to emulate a disconnected mouse needed)
- PS/2 wheel mouse doesn't work properly
- serial wheel mouse detected as a standard mouse and doesn't work at all
- textconfig now supports lists in a list
- network configuration divided in two menus / groupboxes
- ips setting now belongs to the clock menu / dialog
- wx.cc: center status bar items (wxMSW port only)
- wxmain.cc: obsolete stuff removed
code. Up to 3 boot drives are supported now. TODO: new boot dialog for wx.
- config.cc: missing ask formats for enum parameters added
- wxdialog.cc: tab window now uses the label instead of the ask format if defined
- menu and option names for the network configuration fixed
- NIC init code passes script name to ethernet module init code
- VDE module added to the list of ethernet modules
- constant BX_PACKET_BUFSIZE moved to eth.h
- replaced obsolete method ConvertToBitmap() by wxBitmap(wxImage) constructor
- PCI config dialog must be disabled at runtime
- wxWindows has been renamed to wxWidgets, source files updated (TODO: update docs)
Description from the author:
This API allows framebuffer device plugins to draw directly on to the
GUI's tile buffer and hence eliminates the need to memcpy(3C) tiles to
an intermediate buffer. Functions like update_hardware_cursor function
are rendered unnecessary as framebuffer device plugins can now draw the
full range of host colours. svga_cirrus will fallback to calling
graphics_tile_update without a hardware cursor if the GUI doesn't support
the new API. This patch includes implementations of graphics_tile_info,
graphics_tile_get, and graphics_tile_update_in_place (the new API) for SDL
and X11.
- new graphics update API implemented in wx and rfb
- common update functions for guis without support for the new API added (should
be removed after implementing the new API in all display libraries)
data written to the port and where to get the data read from it. Available
modes are 'null' (no input/output), 'file' (output to a file specified as
the 'dev' parameter), 'term' (serial terminal) and 'raw' (use the real serial
port - under construction for win32).
- descriptions for serial and parallel options in bochsrc sample updated
* up to 5 slots can be specified with the 'i440fxsupport' config option
* the pci slot number are hardwired to pci device numbers
* the 'devfunc' value is returned the calling device (useful for multi-function
devices)
* the core of the i440FX chipset is hardwired to pci device 1 + 2; usb is still
optional and appears at device 1, function 2
- ne2k: enable pci features if connected to a pci slot
- ne2k: asic data port supports 32-bit access if ne2k-pci is active
- pci2isa: improved error messages for ELCR1 and ELCR2
bochs.h already not include iodev.h which reduces compilation dependences for almost all cpu and fpu files, now cpu files will not be recompiled if iodev includes was changed
- textconfig runtime menu: some options moved to submenu "Misc runtime options"
- bx_param_c: variable group_name and methods set_group() / get_group() added
- bx_list_c: new flag SHOW_GROUP_NAME added (used for SB16 options in runtime menu)
- define various rfbEncodings
- display and keep track of the rfbEncodings supported by the client
- add todo at start of file
- set sockets option (REUSE_ADDR), useful on solaris
- add LGPL'd rfb protocol specification, thanks to Frederic Bothamy, rewrite based on the rfb protocol document.
- add specific rfb readme to warn about the color depth.
Still to do:
- BigEndian client support (I suspect the current implementation is not clean).
- depth > 8bpp support
- on-board vga card font support instead of vgafont.h
- dimension update support
- optional compression support
and bpp (done for the x display library)
- new switch VBE_DISPI_GETCAPS. The xres, yres and bpp registers return the gui
capabilities if enabled.
- VBE_DISPI_ID3 defined
be used instead of a simple text control (implemented in wx)
- the new flag USE_SPIN_CONTROL is used by the memory size and the irq parameters
- special bx_list_c for the "Other options" menu in the wx configuration added
available at runtime
- wx: 'runtime' flag added to ParamDialog. If this flag is set, all options
with the flag 'runtime_param' clear will be disabled.
- only the runtime options for cdrom's are now enabled in the ATA dialogs at runtime
- the options 'keyboard paste delay', 'mouse' and 'vga update interval' are now
available at runtime
- wxdialog.h: unnecessary comments removed
- disable the items "Configuration interface" and "Display library" for now.
The config interface "wx" is already active and a change is not supported yet.
- new bx_list_c for keyboard options (used in wx, TODO in textconfig)
- new flag USE_BOX_TITLE controls the usage of the list name for the group box label
- wxdialog.cc: unused variable removed
- siminterface: ask_filename() uses the prompt for the parameter name
- wx: missing title of the CMOS dialog added
- floppy path parameter names changed (used by win32config)
- user shortcut parameter description added
- pit: and time0: options are still supported but deprecated
- warn when parsing deprecated directives
- fix wrong number of ata_device_translation_names
- still to do:
- setting time0 to utc is not yet supported
- the man page, user guide and .bochsrc still need to be updated
with the new options
- add handlers called when a parameter is enabled or disabled.
This is useful for parameter dependent on another, that may
not wish to be enabled when its father parameter is enabled.
DEV_kbd_gen_scancode() is called instead of DEV_kbd_put_scancode(). This
change enables the support for different scancode sets. The win32 scancodes
are now converted to BX_KEY_* values (partially copied from gui/win32.cc)
- new text mode features: line offset, cursor size, font height
- key handling rewritten (taken from x.cc)
- headerbar now working
- headerbar colors changed
- graphics modes > 640x480 now cause a BX_PANIC
(based on a patch from Christopher Nelson <paradox@BBHC.ORG>)
* the win32 gui changes the bitmap settings using the bpp argument
* added stubs for all guis except win32
* descriptions of function dimension_update() updated
font usage)
- horizontal and vertical pel panning in text mode implemented (without windows
fonts only)
- separate bitmap for the textmode cursor no longer necessary
- text_update(): unused variable new_start removed
compile time. The old version used this fonts for char heights smaller 14.
If the Windows fonts are enabled, the font heights 12, 14 and 16 are used.
These features are not available in that case:
* charmap change
* char width switch 8/9
* horizontal and vertical pel panning
If the Windows fonts are disabled, the changeable guest font is used and all
implemented features are available. This is the default setting.
TODO: implement horizontal and vertical pel panning
FIXME: Should we add a bochsrc option to control the font usage?
- invalidate character at previous and new cursor location before entering the
update loop
- cursor drawing moved into the update loop
- variables for previous cursor position renamed
- invalidate character at previous and new cursor location before entering the
update loop
- cursor drawing moved into the update loop
- speed optimizations in function DrawBochsBitmap() (malloc/free removed)
- description of function text_update() updated
* changed all %ll format descriptions to FMT_LL macro so that
Microsoft Visual C works correctly (it uses %I64)
* missing type conversions added
* cdrom.cc: variable types for win32 fixed
* removed some unused variables in eth_win32.cc and harddrv.cc
* added missing includes in make_cmos_image.c and niclist.c
in text mode. The new variables 'text_rows' and 'text_cols' are used in the
text_update() function.
- desriptions of the functions text_update() and dimension_update() updated
These changes are based on the SF patch #742670. It did not work with
plugins disabled.
Here is the descriiption of patch #742670:
the library dependencies (see objdump -p file) in the
main bochs binary and the gui plugins are wrong:
- the gui plugins don't depend on their respective gui
libraries
- the main bochs binary depends on all the gui libraries
this doesn't seem much of a problem, since the needed
libraries are loaded anyway, but it's problematic when
building packages for binary distribution of bochs.
in Debian, the package building tools will set package
dependencies according to the library dependencies of
each file, so the result is:
- the main bochs package depends on all libraries. this
includes libwx, libsdl, libncurses and xlibs.
- the indivudual plugin packages don't depend on any
gui library
so when a user wants to run bochs with the curses gui
and installs the bochs-curses package, he/she will be
forced to install Xfree86, WxWindows and GTK+ on
his/her system.
the attached patch fixes the problem by moving the
linker flags related to GUI libraries to the right
makefile (gui/Makefile.in)
in text mode. The new variables 'text_rows' and 'text_cols' are used in the
text_update() function.
- optimizations in function UpdateScreen()
- desriptions of the functions text_update() and dimension_update() updated
* renamed variables textres_x and textres_y to text_cols and text_rows
* use text_rows in function text_update() instead of the function argument
(unused for now - should be removed)
* fixed a warning (bochs_icon_bits)
cursor enable/disable support implemented
- function dimension_update() now calculates the number of visible rows and
columns in text mode
- draw a border if the physical screen is larger than the bochs text screen
- initialize color pairs only when color support is present
- german umlaut characters added in function get_term_char()
- function get_term_char(): unsupported characters are now replaced by spaces
and implemented in SDL
* sequencer controller register 0x01 bit 0 controls the width of the characters.
This value is used to calculate the screen width.
* attribute controller register 0x10 bit 2 controls the appearance of graphics
characters (ASCII 0xC0 - 0cDF). A change of this value forces a charmap update
to rebuild the font bitmaps.
* the SDL display library uses the new feature described above
* the other display libraries recalculate the screen width, since they are using
a fixed font width of 8 for now.
- VGA: attribute controller register 0x10 bit 2 (enable_line_graphics) does not
switch the palatte in CGA mode
- line offset handling simplified
- calculate textres_x and textres_y after changing the font dimensions
- unnecessary size check in function dimension_update() removed
You can now choose for each disk on the ata interfaces the
disk mode, between :
- flat : one file flat layout
- concat : multiple files layout
- external : developer's specific, through a C++ class
- dll : developer's specific, through a DLL
- sparse : stackable, commitable, rollbackable
- vmware3 : vmware3 disk support
- undoable : flat file with commitable redolog
- growable : growing file
- volatile : flat file with volatile redolog
- z-undoable : gziped flat file with commitable redolog
- z-volatile : gziped flat file with volatile redolog
A new "bxcommit" utility can merge commitable redologs to
flat images.
DEV_kbd_gen_scancode() is called instead of DEV_kbd_put_scancode(). This
change enables the support for different scancode sets. The win32 scancodes
are now converted to bx_key values.
- function userbutton_handler(): stop parsing the shortcut string if the
key name is invalid
- function userbutton_handler(): incrementing variable 'len' simplified
- function snapshot_checker(): fixed a warning
