- Don't set up and load pre-defined optional plugins in restore mode.
- Remove the save/restore registration in Voodoo destructors.
- TODO: Fix frozen SDL/SDL2 display after restore.
VRAM are possible at the same time without changing mode. This makes the GRUB
bootloader menu visible when using the Bochs VBE adapter instead of Cirrus.
- Added default value for the video clock frequency to make sure that the
vertical timer works.
- Changing vidDesktopStartAddr register when the video processor is on now
forces a screen update.
- Fixed PCI BAR initialization (now using memset()).
- Fixed reset failure (set all PAM memory types to ROM).
- Added stub for the AGP aperture (register BAR #0, handle APSIZE and read
GART entry in read/write handlers).
- Added some more PCI register defaults and write masks.
- Fixed a warning in the ES1370 code.
- Voodoo Banshee: set up PCI subsystem ID depending on bus and model.
- Volatile BIOS write support must also be present in ISA BIOS memory.
Using a temporary subsystem ID, since I haven't found a VGABIOS ROM image for
the PCI version and Bochs doesn't support AGP yet. After modifying Voodoo3.inf
the driver could be installed successfully in Win95/98 and the Voodoo3 works as
expected (same issues as the Banshee model).
Removed BX_ERROR message about setting undocumented srcXY register bits. They
seem to have no effect on the emulation and could be ignored.
- Screen-to-screen blt: added support for expanding monochrome source data.
- Fixed calculation of the pitch for packed source data.
- Fixed repeated execution of some commands in non-immediate mode.
- PCI devices: fixed and improved BX_INFO / BX_DEBUG messages.
- Added INT pin init to method init_pci_conf().
- Moved readonly register handling to the common PCI write handler.
- Moved IRQ line reporting to the common PCI write handler.
- Added new structure bx_pci_bar_t that contains all parameters related to the
PCI BARs (type, size, address and r/w handlers).
- Added new methods init_bar_io() and init_bar_mem() to set up the new structure
in the pci device init code.
- Added new method pci_write_handler_common() to handle writes to the normal
BARs and the ROM BAR. Writes to other registers are forwarded to the device
specific PCI write handlers. Removed BAR and ROM BAR handling from the
specific code.
- Added new method pci_bar_change_notify() to execute specific code after BAR
update (vga, ne2k).
- Moved normal BAR handling to method after_restore_pci_state().
- Store pointer to PCI device name in bx_pci_device_c and use it for i/o setup.
- Added support for stippled lines.
- Fixed return values of the I2C interface with no VMI/decoder connected.
- Added some comments about current status of the Banshee code.
- Basic I2C implementation for DDC2B support.
- Added VESA EDID structure (values from a patch for the LGPL'd VGABIOS).
- Windows now detecting plug&play monitor "Bochs Screen" if an original VGABIOS
image is used (Cirrus PCI / Voodoo Banshee).
- TODO: Add this feature in the Cirrus version of the LGPL'd VGABIOS.
- Happy new year!
- Improved pixel format conversion in host-to-screen operations.
- Rewrite of the linear framebuffer read/write code fixes icons in 16 bpp mode.
- Don't flood log file when polling the 2D status register (similar to 3D one).
- FIXME list:
- Minor issues in all Banshee modes (e.g. forward/back buttons in explorer).
- Display errors in 16 bpp mode after leaving 3D mode.
- Display errors in 16 bpp mode in case debug messages are turned on (timing).
- Voodoo2 3D demo "donut" still fails.
- Bochs crashes on Windows host (MSVC in some cases, MSYS2 64-bit build also
reported, but not yet reproduced.
- TODO list:
- Remaining 2D stuff: polygon fill, stretching functions.
- Move Banshee stuff to separate files.
- Add Voodoo3 support (it's an improved Banshee card).
- Simplified register writes from CMDFIFO using new methods in the new classes.
- Started work on reset() and continued work on save/restore support.
- Mention the Banshee model in the Bochs documentation.
bx_voodoo_base_c that contains the shared code and the new classes
bx_voodoo_1_2_c and bx_banshee_c with the specific implementations. There are
not functional changes yet. TODO: The Banshee specific stuff could be moved to
separate files, but should still remain in the same plugin as Voodoo 1/2.
- Fixed alignment for unpacked monochrome source data in case the calculated
required amount of data for one row is more than the given source pitch.
In even rows the leftmost pixel comes from the LSB bit #7 as expected.
In odd rows the whole row is aligned to the next dword boundary (the rightmost
pixel comes from the MSB bit #0). This alternating alignment is not documented,
but fixes some bitmaps (e.g. Win95 login / logout dialogs).
- Fixed calculation of host-to-screen data size for the pixel alignment > 0 and
color depth > 8.
- Added minimal support for pixel format conversion (32/24 to 16).
- Also set the "Banshee busy" flag if one of the CMDFIFOs is busy.
- Fixed CMDFIFO error message condition.
- Tiled source pitch is only used for screen-to-screen operations.
- Use the CMDFIFO wakeup on vertical retrace only for the 3D mode.
- Report screen mode change (2D, 3D, mixed).
- Added BX_ERRORs for currently unsupported pixel format conversion.
- Only continue bitblt operation if width and height is > 0 after clipping.
- Temporary hack: Processing CMDFIFO packets directly after completion fixes
some display issues (FIXME: 3D mode should work like Voodoo2).
