- Fixed probing the CMDFIFO with Voodoo output disabled (send FIFO wakeup
directly, otherwise driven by vertical retrace).
- Use the CMDFIFO member 'enabled' instead of reading the fbiInit7 register bit.
- TODO: The Voodoo2 freeze when testing a Voodoo1 demo is still not fixed.
- voodoo_init() must be called after initializing FIFO mutex.
- The 'op_pending' counter must be reset after resetting FIFOs.
- Fixed an MSVC warning and removed obsolete comment.
- FIXME: There are still some conditions that can freeze the Voodoo display.
it's 64 entries is still not present, since it makes the emulation a few
percent slower due to the overhead of the FIFO code. The memory FIFO has 64k
entries and makes a speedup of around 75 % possible.
- Now using float type for the 'clk0_freq' variable.
- DAC register 6 can switch to half pixel clock (ported from PCem).
- Writing value 0xf8 to PLL register 0x0e completes clock #0 setup.
non-WIN32 platforms instead of BX_MSLEEP(). The donut demo is once again a
little bit slower, but on other tests the IPS values are still okay. Cleaned
up the code a little bit and added save/restore stuff for the new code.
packets and then always sleep for 1 millisecond.
TODO: The first tests with pthread_cond_* stuff showed a slowdown of approx.
10 % compared with the IPS value of the current code.
command and execute it when there is enough data present (code partly ported
from voodoo.h.txt).
TODO: Use "wait for event / condition" functions instead of msleep() if there
is a performance improvement with it.
- Modified win32 thread macros to use the handle instead of the id.
- Added new macro BX_THREAD_KILL to terminate threads.
Voodoo thread changes:
- Let the cmdfifo_thread sleep while the CMDFIFO is disabled.
- Kill the cmdfifo_thread in destructor and removed old thread control code.
- Added capability to save/restore float type values in paramtree / siminterface.
- Added Voodoo2 triangle generator data to save/restore list.
- Implemented bitBLT function "SGRAM fill".
- Minor other changes and cleanups.
- TODO: remaining bitBLT functions, thread handling improvements.
voodoo.h.txt which was a part of the original voodoo patch for DOSBox.
Some Voodoo2 specific parts were not integrated in the main patch file. I guess
they have been removed since Voodoo2 support was incomplete (2D stuff missing).
TODO: Voodoo2 2D support (bitblt engine), more testing, code cleanup...
- Added CMDFIFO thread similar to the sound output thread.
- split register write function in 2 functions: register_w_common() handles
the CMDFIFO writes and valid registers in CMDFIFO mode. It forwards write
accesses to other registers to register_w() (Voodoo1 and non-CMDFIFO mode).
The CMDFIFO thread also calls register_w() when processing data.
- The CMDFIFO thread processes all data, but it does not yet execute type 3
requests (extended triangle generator missing).
- TODO #1: implement Voodoo2 specific triangle functions (for CMDFIFO).
- TODO #2: implement 2D bitblt engine.
- Zero out voodoo device state in init().
- Added the CMDFIFO state to save/restore list.
- Added CMDFIFO register handling in read/write functions.
- Added new function cmdfifo_put().
- TODO: CMDFIFO thread.
- Fixed normal register access in CMDFIFO mode.
- Implemented cmdFifoBaseAddr register behaviour.
- Write CMDFIFO data to FBI memory (has no effect yet).
- Changed some log messages to BX_DEBUG.
- Report unimplemented Voodoo2 registers.
- TODO: Add FIFO thread to process the CMDFIFO data.
valid. The hRetrace value can be set now, since Bochs no longer crashes.
TODO: Implement enough of the FIFO stuff to make the Win9x driver for the
Voodoo2 work.
- Voodoo: Use the VGA/Cirrus timers to drive the gui screen update.
The vertical retrace emulation is still driven by a separate timer.
- VGA/Cirrus: Since we are using the virtual timer, we also have to read
time_usec() from it.
- vgacore: removed unused timer methods.
- prepared hRetrace value implementation (cannot be enabled yet, since the
driver passes this test and gets confused in next stage (segfault).
- Detect CMDFIFO access (not present yet).
- Report disabling Voodoo graphics mode.
- TODO #1: Fix Voodoo2 to make it usable.
- TODO #2: Split update code and drive gui screen updates from the VGA timer
(finally remove new realtime option again).
- Since we are using the virtual timer, so we have to read time_usec()
from it, too (TODO: realtime mode is hardcoded, maybe add an option).
- Voodoo1 and Voodoo2 have different timing register widths.
- Fixed vertical retrace value returned by get_retrace().
- Prepared separate hvRetrace register (TODO: hRetrace).
- Store the Voodoo model in structure bx_voodoo_t.
- The PCI initEnable register of the Voodoo2 model has a read-only secondary
revision ID in bits 12..15. Now the Voodoo2 is correctly detected by the
Windows driver, but display is not yet working (blank screen).
- Reset now disables VGA override.
- PCI: Moved PCI device base class methods to the end of file devices.cc and
re-define LOG_THIS to use the correct log module and prefix.
bx_devmodel_c. The early version of the combined vga / svga_cirrus code
required the now obsolete implementation. Some related cleanups in the
devices code.
- Since the pci_read_handler() method is identical in most devices, move it
to the base class to reduce code duplication. Only the 'pcidev' device has
it's own implementation (NOTE: it is not maintained yet).
- Minor other fixes and cleanups in some PCI devices.
- added Android case to the configure script.
- renamed file memory.h to memory-bochs.h to fix conflict with NDK.
- fixed Android issues in some files.
- vgacore: double font and screen width at half dot clock.
- X gui: improved font bitmap generation to support width > 9.
- win32 gui: adjust values to use existing stretching feature.
- guis rfb, sdl, sdl2, vncsrv and wx: double pixels if font width > 9.
The timers now have a new member 'realtime' and they are driven by the
selected engine. The VGA update timer and the status LED timer now always use
the realtime mode, but the PIT and CMOS RTC depend on the clock options.
