- Implemented destination colorkey support for the remaining functions.
- Some other small changes in the Banshee code.
- TODO: Source colorkey support for host-to-screen blts.
- Fixed start address for the gui screen update in 3D overlay mode.
- Small optimization for drawing transparent monochrome bitmaps.
- In the restore case start the fifo thread in after_restore_state().
- Report unimplemented colorkey feature (test case missing).
- TODO: issues in some Windows guests still not fixed.
- Don't set up and load pre-defined optional plugins in restore mode.
- Remove the save/restore registration in Voodoo destructors.
- TODO: Fix frozen SDL/SDL2 display after restore.
- Fixed PCI BAR initialization (now using memset()).
- Fixed reset failure (set all PAM memory types to ROM).
- Added stub for the AGP aperture (register BAR #0, handle APSIZE and read
GART entry in read/write handlers).
- Added some more PCI register defaults and write masks.
- Fixed a warning in the ES1370 code.
- Voodoo Banshee: set up PCI subsystem ID depending on bus and model.
- Volatile BIOS write support must also be present in ISA BIOS memory.
- Simplified register writes from CMDFIFO using new methods in the new classes.
- Started work on reset() and continued work on save/restore support.
- Mention the Banshee model in the Bochs documentation.
bx_voodoo_base_c that contains the shared code and the new classes
bx_voodoo_1_2_c and bx_banshee_c with the specific implementations. There are
not functional changes yet. TODO: The Banshee specific stuff could be moved to
separate files, but should still remain in the same plugin as Voodoo 1/2.
- Only continue bitblt operation if width and height is > 0 after clipping.
- Temporary hack: Processing CMDFIFO packets directly after completion fixes
some display issues (FIXME: 3D mode should work like Voodoo2).
- Handling variable 'gui_update_pending' like Voodoo 1/2 fixes 3D display
flicker. Simplified first stage of the update() code. Some 3D display issues
still need to be investigated.
- Added missing 16-bit write support in 3D memory space.
- Added separate method for linear FB writes und use it for CMDFIFO packet type
5, destination code 0. Added minimal "byte disable" support in this code.
- Added Banshee specific registers in register_w() since they use the same
addresses as the Voodoo2 CMDFIFO config registers in register_w_common().
Now the fullscreen 3D mode is basicly working. The display flickers sometimes
and the desktop is possibly unusable after leaving 3D mode. This may be
caused by the still incorrect CMDFIFO implementation.
- Split the host-to-screen method in two ones: one for the pattern case (ternary
ROPs) and one optimized for the standard case (binary ROPs).
- Improved the foreground/background color handling for bitblt operations.
- Disabled voodoo_update() function completely and added the required code to
the vertical timer handler (Voodoo 1/2).
- Added new method banshee_blt_execute() to reduce code duplication.
- Added support for the pattern x/y start offset (Banshee).
- Implemented line / polyline commands (solid lines only). The algorithm comes
from the already removed unused draw_line() function.
- Implemented start bit/byte support for host-to-screen blts.
- Rewrite of the launchArea handling: added new method for setting up the
required size and handle all currently implemented command in launch mode.
- Implemented ternary raster operations. With 3 binary input values we have 8
possible combinations und the ROP code is the binary representation of the
result table. Instead of implementing cascades of binary operations at byte
level, we simply build a 3-bit value from D, S and P. This is the bit number
of the ROP code to use as the result. This is performed for each bit of color
data. We still keep the existing binary operations at byte level, since the
code is faster for that case.
- Inplemented the "row #0 only" flag handling in pattern fill operations. This
flags seems to have an undocumented effect on the source pitch of
host-to-screen operations. This issue needs to be investigated.
- TODO: Some bits of the srcXY register seem to have an undocumented effect on
host-to-screen operations, too.
tile-based updates and screen update locking. Some related changes in the init
and save/restore code are also included. The main update code has been moved
from bx_voodoo_vga_c to bx_voodoo_c and the required parameters are set up
depending on the model. The BX_LOCK/BX_UNLOCK and SET_TILE_UPDATED stuff still
needs to be added in the 3D core. Currently a redraw_area() hack makes the
Voodoo 1/2 screen updates work as expected.
- Fixes and optimizations in the BitBlt code.
- Added mutex for display updates and lock some register writes and the BitBlt
methods during screen update.
- Improved some debug messages.
TODO: Use the render_mutex for the Voodoo1/2 update code, too.
almost usable in 8 bpp mode, but there are still issues (see below).
- Added basic support for pattern fill functions.
- Added some more ROPs (all S/D and P/D ones).
- Now using the ROP functions in rectangle, pattern and host-to-screen code.
- Several other related changes.
TODO:
- Implement remaining binary (P/S) and all of the ternary ROPs.
- Some Windows icons are still black or messy (e.g. start button) and screen
are missing in some cases. Shutdown background is wrong, although the correct
ROP is used.
- Cleanups and optimiations when the code is known to work as expected.
- Fixed hardware cursor bottom/right edge display bug.
- Started splitting 2D code in different methods (no functional changes).
- Added hardware cursor to save/restore list.
TODO #1: Implement bitblt engine similar to the Cirrus one.
TODO #2: Voodoo code reorganization: base class with Voodoo core, one subclass
for Voodoo1/2 and one for Banshee.
in 8 bpp mode, but it's not yet usable (no cursor, no text). List of changes:
- Added AGP/CMD/Misc register handling (CMDFIFO #0 is now usable).
- Started work on 2D register handling ("Rectangle fill" command implemented).
- Added Banshee specific code in redraw_area().
- Writing to VGA DAC registers also modifies the Banshee CLUT.
- Banshee now indicates that no TV-out and video-in device is connected.
- Some other related fixes and improvements.
- Added VCLK array and removed hardcoded values.
- Added new method get_crtc_params() to retrieve htotal and vtotal values.
- Cirrus: Set up VCLK registers with default on reset (TODO: VGABIOS should do
that when setting video mode).
- Voodoo Banshee: Set up VCLK #3 when writing to pllCtrl0 register. VCLK #0 and
#1 are VGA compatible and VCLK #2 is fixed 50 MHz. Fixed maximum resolution
based on PLL section of the spec.
- Banshee Memory layout implemented (AGP/misc and 2D register behaviour not
implemented yet). Now Win95 with Banshee driver can boot in standard VGA mode.
- Fixed memory allocation: Banshee has 16 MB shared LFB / TMU memory.
- Some work on save/restore support.
- Renamed Banshee VGA register handlers.
- tile-based VBE graphics updates implemented
- "half mode" support added (line doubling for low resultions)
- change screen resolution only after re-enabling the video processor
"Voodoo VGA" framework. Most of the work is still to do.
- Added Banshee specific PCI write handler and related stuff. The device is
initialzed properly by the Bochs BIOS (mem, lfb, rom and i/o).
- With Banshee specific VGA BIOS it passes the init stage and boots properly
to DOS. Parts of the init code coming from file "voodoo.h.txt" (part of the
original patch).
- Standard VGA modes are all usable (using the Bochs VGA core).
- VBE graphics modes with 8, 16, 24 and 32 BPP are usable (VBE drawing code is
mostly copy&paste from the Bochs VBE code. DAC 6/8 bit switch is present.
- TODO list:
- Voodoo Banshee memory layout (registers, 2D, 3D, LFB, textures)
- 2D graphics engine must be written from scratch
- interaction between new device and existing 3D core
- non-VGA mode (Voodoo model "banshee" without VGA extension "voodoo")
- save/restore support, move Banshee stuff to separate file, ...
currently only implements an ISA standard VGA adapter with the selected Voodoo
model as it's extension. The methods of the "Voodoo VGA" device only call the
required methods of the Voodoo or VGA core.
TODO: Start implementing the Voodoo Banshee chipset based on this code.
- Voodoo: Use the VGA/Cirrus timers to drive the gui screen update.
The vertical retrace emulation is still driven by a separate timer.
- VGA/Cirrus: Since we are using the virtual timer, we also have to read
time_usec() from it.
- vgacore: removed unused timer methods.
- prepared hRetrace value implementation (cannot be enabled yet, since the
driver passes this test and gets confused in next stage (segfault).
- Detect CMDFIFO access (not present yet).
- Report disabling Voodoo graphics mode.
- TODO #1: Fix Voodoo2 to make it usable.
- TODO #2: Split update code and drive gui screen updates from the VGA timer
(finally remove new realtime option again).
- Since we are using the virtual timer, so we have to read time_usec()
from it, too (TODO: realtime mode is hardcoded, maybe add an option).
- Voodoo1 and Voodoo2 have different timing register widths.
- Fixed vertical retrace value returned by get_retrace().
- Prepared separate hvRetrace register (TODO: hRetrace).
- Store the Voodoo model in structure bx_voodoo_t.
- The PCI initEnable register of the Voodoo2 model has a read-only secondary
revision ID in bits 12..15. Now the Voodoo2 is correctly detected by the
Windows driver, but display is not yet working (blank screen).
- Reset now disables VGA override.
- PCI: Moved PCI device base class methods to the end of file devices.cc and
re-define LOG_THIS to use the correct log module and prefix.
bx_devmodel_c. The early version of the combined vga / svga_cirrus code
required the now obsolete implementation. Some related cleanups in the
devices code.
- Since the pci_read_handler() method is identical in most devices, move it
to the base class to reduce code duplication. Only the 'pcidev' device has
it's own implementation (NOTE: it is not maintained yet).
- Minor other fixes and cleanups in some PCI devices.
- renamed trigger_timer() methods to refresh_display()
- new argument 'redraw' added to force a refresh of the entire screen
(used in snapshot mode)
- siminterface method refresh_vga() now checks if the Bochs gui init is complete
- use SIM->refresh_vga() in some more cases
- graphics_tile_info() split into a common and specific part
- store snapshot mode in structure bx_svga_tileinfo_t
- in snapshot mode, display adapters copy raw data to buffer
- rewrite of the trigger_timer() code to make it work in all cases
- added new class bx_nonvga_device_c to make forwarding refresh requests to the
Voodoo adapter possible
is based on a patch originally designed for DOSBox. Currently only the Voodoo1
adapter model can be emulation. The emulation is currently slow, but we intend
to clean up and optimize the code. Running the 3D engine in a separate thread
is also planned. To compile with Voodoo support the configure option
"--enable-voodoo" must be used. Then the device can be activated with
"plugin_ctrl: voodoo=1" in bochsrc or on the command line. The device will be
assigned automatically to a PCI slot unless you do that manually. A specific bochsrc
option to select the adapter model will be added when the code has support for it.
