- uninstall parameter handlers (floppy, keyboard)
- unload plugin that cannot be removed automatically
- wx: removed "show keyboard" demo and some other cleanups
- TODO: remove wx debugger and make wx work with the enhanced gui debugger
- ported Qemu block driver (written by Alex Beregszaszi and Kevin Wolf)
- added helper functions bx_read_image() and bx_write_image()
- TODO: use helper function for the other disk image modes
- SIM->opt_plugin_ctrl() now can be used to verify the optional plugin
configuration when using the plugin name "*". The 'load' value 1 makes
sure that all plugins with the value 1 are loaded. The 'load' value 0
unloads all plugin with the value 0 (marked for removal).
- add the default set of plugins to the 'plugin_ctrl' list and load all these
pre-defined optional plugins before parsing the configuration.
- special wx case: verify plugin configuration before showing the plugin
control dialog and before initialising hardware.
- device plugins that have been loaded, but not configured now set their
plugin control value to 0. Added the plugin unload check before signalling reset.
- enh_dbg: fixed defined-but-not-used warnings
- siminterface: renamed 'wx_debug_gui' to 'bx_debug_gui' and updated comments
- TODO: remove the wx debugger and use the enhanced gui debugger instead
- new gui method set_mouse_mode_absxy() should switch the gui to absolute
x/y mode
- new DEV_mouse_motion() argument 'absxy' indicates whether or not the gui
sends absolute x/y values
- USB tablet code prepared to use the new feature
- TODO: implement this feature for each gui (sdl, win32, wx, x, ...)
in the config interface. Applied settings are marked as 'done' with the value
-1 to avoid unwanted modification. NOTE: Not all Bochs modules exist when
running the start menu / dialog.
- siminterface: don't create plugin parameter if it already exists
- wx: make sure all plugins are loaded when creating plugin control dialog
- USB HC's: fixed removal of parameters when unloading plugin
also works and no deplist trick is required
- bx_param_c destructor now deletes the dependent list if it exists (memory leak)
- bx_list_c::clear() only deletes the parameter if the list is it's parent
- added new method cleanup_save_restore() to free memory on simulator shutdown
- bx_list_c: don't accept duplicate param names in list (except dependent lists
and special menus)
- added BX_PANIC for malloc() failure
- harddrv: fixed wrong variable found with bx_list_c changes
- changed argument for the text mode info structure to a pointer
- added attribute controller palette to bx_vga_tminfo_t and removed the
previous implementation
- carbon.cc: attempt to fix the text mode colors (untested)
- x.cc: fixed warnings
also for textconfig - fix operation under cygwin
under cygwin it is not guaranteed that any printf is printed on the screen under you flush the FILE stream.
in the gui object. Now the gui doesn't need to include vga.h.
- TODO #1: win32.cc also shouldn't include vga.h
- TODO #2: replace BX_MAX_XRES / BX_MAX_YRES by variables that can be set
depending on the configuration
- unknown module names now cause a panic
- added log function names to some more devices
- TODO: find a way to configure log actions by device in the config interface
start menu (most of the devices do not exist at this point)
invalid module names, save log actions to bochsrc)
- added new member 'name' to the logfunctions class for the case the prefix
is too short. Added to some devices with longer names.
to update the status text if there is really a change
- changed the counter resolution to 5 (auto-off still happens after 0.5 seconds)
- the element value -1 is only used to reset the LEDs, so we have to ignore the
status flags
existing "iolight timer" code in the hard drive code. If an LED is registered
with the "auto-off" flag, the device only needs to turn on the LED to indicate
data transfer. The LED timer in the gui code turns it off after 0.5 seconds if
it is not actived by another transfer. Added this feature to all network
devices.
- TODO #1: implement this feature in the USB host controllers
- TODO #2: the unused timer in the hard drive code could be used for the
emulation of seek functions
plugins is implemented in bochsrc, these functions can be used to install
additional options from the devices code. Then the whole init / parse / save
code for this device can be moved from config.cc to the device plugin.
with the host time. After using a runtime config dialog or save and restore
simulation, this behaviour makes the PIT clock and the VGA update timer
running way too fast until it's back in sync. Now the elapsed time is stored
in the variable 'real_time_delay' and it is used to let the PIT clock run at
realtime speed, even if it is out of sync.
- fixed size entries in bitmap file header for 8 bpp
- bx_param_filename_c now uses the file extension from the initial value as
the default (if present)
- SIM->ask_filename() now uses the correct parameter type
- win32paramdlg AskFilename(): added filter for BMP files
grabbed from SDL 1.2)
- TODO: implement this feature in other display libraries and add a key repeat generator in the
keyboard code that uses the typematic values from the guest.
Selecting CPU MODEL from .bochsrc automatically chooses real HW CPUID and also configures Bochs emulator to emulate this specific CPU including all its features only.
Supported CPUs to choose from:
core2_extreme_x9770
corei7_sandy_bridge_2600K
p4_prescott_celeron_336
parameters (path + status) have been set. TODO: implement this feature for the floppy, too.
- call update_drive_status_buttons() from update_runtime_options() to reduce the number of calls.
Now call update_runtime_options() from the gui floppy / cdrom handlers after closing dialog.
The patch was posted in mailing list at Thu 6/16/2011.
Desription for CHANGES:
- Memory
- Added new configure option which enables RAM file backing for large guest
memory with a smaller amount host memory, without causing a panic when
host memory is exhausted (patch by Gary Cameron). To enable configure with
--enable-large-ramfile option.
* moved runtime handlers for cdrom from config.cc to the device object
* cd media status variable is now always of type bx_bool
* changed obsolete gui names like "cdromD" to "cdrom1"
* TODO: implement new runtime config mechanism similar to USB
each other. Devices can register a handler to update it's state after runtime
configuration. The new method update_runtime_options() executes all registered
device handlers before the simulation continues.
- USB host controllers now using the new mechanism to handle the runtime device
change (replaces the previous timer-based implementation). TODO: floppy and
cdrom could use this feature, too)
- improved USB device change messages
DAC2 is sent to the lowlevel sound module. DAC1 and sound input (ADC) are not
yet supported. Also unsupported: CODEC (mixer), UART (MIDI) and legacy support.
Sound module selection in configure script now no longer depends on SB16 and
uses autodetection only.
- fixed segfault when saving bochsrc
* ported the read part of the Qemu vvfat block driver
* added win32 specific directory functions (required for MSVC)
* TODO: write support, FAT32 support, read MBR and boot sector from file
- siminterface: added helper method hdimage_get_mode()
- moved hdimage related stuff from harddrv.cc to the hdimage code
- changed hdimage related names
the SF patch #1539417, but rewritten from scratch (patch too old). Differences
to the original version:
* internal parameter name "readonly"
* update parameter if floppy image is readonly
* wxWidgets support
* documentation updates
* no specific toolbar buttons
the default Bochs method using the CTRL key and the middle mouse button there
are now the choices CTRL+F10 (like DOSBox) and CTRL+ALT (like QEMU).
* currently implemented in the X11 and SDL guis only
* TODO: porting to wxWidgets and Win32, documentation updates
'sdl'. Now both display libraries can be compiled together and used with the
'show ips' feature. TODO: win32-specific 'show ips' timers for 'rfb' and 'wx'
to access non-static devices from static parameter handlers.
- removed USB hub register mechanism and use the new device pointer parameter
methods instead
* removed old win32 runtime config dialog since the property sheet isn't
compatible with the win32 ParamDialog
* reorganized runtime parameter lists (usb and cdrom setup in device init)
* renamed win32 StartMenuDialog() to MainMenuDialog() and some related name
changes
* added runtime support to the MainMenuDialog
- win32 start/runtime menu: set keyboard focus to the start/continue button
- win32paramdlg: SetParamList() now checks for list size changes to avoid crash
and value must be != "none" to enable dependents)
- set dependent list for floppy path (removed enable handler)
- win32paramdlg: added support for string parameter dependent lists
* floppy device type selection wasn't present in the old version
* "Create Image" button for creating floppy image with selected name and type
* after selecting image file with "Browse", the media type is set to "auto"
and the status is "inserted".
filename is read from and written to this buffer instead of using the get/set
methods of the given parameter (now used by win32ParamDialog() and similar
dialogs using the "Browse" button)
the existing runtime dialog ('textconfig' is still available)
- removed notify callback redirection from sdl.cc and win32.cc
- removed win32 specific code from textconfig.cc
- fixed parent window for folder selection dialog
- minor size changes in start menu dialog
non-empty path
- floppy devtype parameter now uses CMOS values and drive type names
- related changes in the floppy code
- simplified floppy parameter handlers
- some floppy parameter label changes
- added enable handler for the floppy path parameter
- update dependent params after setting the dependent bitmap of enum parameter
- win32paramdlg: fixed setting parameters at runtime
- fixed win32 ParamDialog return value for close/cancel
- runtime dialog for the first cdrom drive on win32 is now created as a win32
ParamDialog (removed old cdrom1 dialog stuff)
- minor fixes in x11 string dialog for the cdrom path & status case
start menu
* textconfig: added menu item for the win32 start menu dialog and removed
direct calls to win32ParamDialog()
* added support for Bochs config files in AskFilename()
* moved log options handling to separate functions used both by the start menu
log options dialog and the related property sheet page of the runtime dialog
dependency list processing, enum parameter support)
- bx_param_enum_c: added argument for the default value of the dependent bitmaps
to set_dependent_list()
- bx_param_num_c: dependent_list is now a protected member of the object to make
it accessible for the enum specific dependency code
- config.cc: ata parameter dependency rewrite to avoid multiple dependencies
- config.cc: added missing dependency for SB16 parameter list
Bit64u value with the "enable bitmap" (e. g. bit #0 is the enable value for
the first item of the dependent list). TODO: use this feature in win32 and wx
dialogs
- ata drive type and loader hack parameters now using the enum dependent list
- avoid multiple dependencies in the SB16 config menu
- added file extension support for bx_param_filname_c
- fixed showing of tab control child lists
- added special disk menu for the win32 ParamDialog
- on win32 use the ParamDialog instead of textconfig submenus (TODO: gui dialog
replacement for the start menus
* added dialog item list register mechanism
* create controls for child list inside of group boxes or tab controls
* TODO: re-implement support for multiple dependencies
- added support for the bx_param_num_c flag USE_SPIN_CONTROL
- fixed win32 dialog item ID list
- implemented dependency handling for boolean items
- now show all items if not at runtime
- moved init code for checkbox and combobox controls to their create functions
- TODO: handle child lists, dependency handling for enum items, several options
of the parameter types
* ported the basic functionality of the wx ParamDialog to win32
* moved AskFilename() function to the new file
* win32ParamDialog() now used for the external USB hub (if present)
* TODO: with some extensions it might be possible to use it for all runtime
dialogs and to implement a gui replacement for the textconfig start menu
* USB runtime options moved to a new dynamic menu
* USB host controllers create own submenus in init()
* USB runtime parameter handlers simplified
* TODO: related changes in the wx and win32dialog code
