to "*_ENABLED"
- bx_serial_options for all 4 ports moved into an array com[4]
- serial port com1 is enabled by default
- detection of com2, com3 and com4 config options disabled for now
- new parameter "enabled" added to the serial bochsrc options
- error handling for serial and parallel bochsrc options changed. The unhandled
BX_PANICs are replaced by BX_ERRORs.
- new function bx_write_serial_options() added
- serial destructor restores original terminal settings only when serial port
is enabled and the tty_id is valid
parport1 with the new option "enabled". The old option "enable" only
controlled the output. The parport1 is enabled with no output by default.
Changes:
* bochrc option "enable" replaced by "enabled"
* parport option "Oenable" replaced by "Opresent"
* bx_parport_options par1 and par2 replaced by an array par[2]
* initialize parport1 resources only when enabled
* renamed variable "parport_init_list" to "par_ser_init_list" since it
contains parport and serial options
* documentation and bochsrc updates
- the parport variables "output" and "initmode" now belong to the bx_par_t
structure
- TODO: add parport2 (disabled by default), parport detection in the bios
- PCI configuration space of the host bridge renamed from array[] to pci_conf[]
- new functions load_ROM() and mem_read() for ROM access
- macros for PCI functions defined in bochs.h
more work in the floppy and bios code.
- floppy and cdrom entries in the runtime config menu can be disabled if the
drive wasn't defined in bochsrc or start menu
- floppy variable "initial_status" and cdrom variable "inserted" renamed to
"status"
- unused variable *ips in function build_runtime_options_prompt() disabled
* new floppy type 360k can be used in .bochsrc and the config interface
* media type and geometry can be set for the floppy type
* BIOS changes to make 360k floppy drives work
* bximage can create 360k images now
and works okay with one rom track only. We still have to implement reading
the real TOC on win32.
- in function GetCDCapacity(): type of variable 'buf[8]' must be 'unsigned char'
- in function capacity(): win32 version returned the number of bytes, but it
should return the number of blocks (ASPI blocksize is 2352)
- description of the function capacity() fixed (it always returns blocks)
controller returns an error code until we are able to implement this feature.
- init_send_atapi_command(): don't panic if alloc_length is 0, use byte_count
to set alloc_length instead
- fixed a BX_PANIC message in the io write handler for port 0x1f0
- init(): set the initial status to BX_EJECTED if evaluate_media() fails
- don't modify the DOR when a drive > 1 is selected
- floppy command 'get status' now recognizes the head field
- floppy command 'recalibrate': don't set cylinder to 0 before completion
- floppy command 'sense interupt status' does not clear status register 0
- floppy command 'configure': more detailed BX_DEBUG messages
- floppy command 'read ID' does not modify status register 0
- floppy read/write commands: set the error bit in status register 0 if media
is not present
- better detection of not existing drives in some commands: check the media type
of the selected drive instead of the drive select value
- behaviour of floppy commands 'recalibrate' and 'seek' changed:
* drive is busy in the execution phase, but not the controller
* replaced the panic by setting the error status if drive is not existing
- evaluate_media(): set the media type even if device/file is not present
DMA functions defined. Most of the changes are based on the "bochs sync"
version of plex86. Here is the list of changes:
* register/unregister functions for DMA channels added. The DMA controller
can use the DMA read/write handlers of registered devices directly.
* "hardwired" code in dma.cc removed
* all DMA related code in devices.cc and iodev.h removed
* DMA related code in pc_system.* removed except HRQ handling
* macros for DMA functions defined in bochs.h
* floppy and SB16 code modified to use the changes described above
The new function register_pci_handlers() is similar to the register functions
for i/o addresses. A PCI device can register the read/write handlers for it's
private PCI configuration space. The i/o mapped registers of the host bridge
control the access to the configuration registers of each PCI device. You can
select the bus, device, function and register address with the confAddr
register. The confData register is a window to the configuration space of the
selected device.
- reset sets the values of the i/o mapped registers to 0
- changed some BX_INFO messages to BX_DEBUG
This means that the REALTIME_PIT now only works on machines
that are capable of sustaining 150000 IPS, in aggregate. This
seems a reasonable requirement, as even my 200Mhz PPC with 16MB
of memory can sustain that.
This is now probably ready for primetime, so I need to get it
added to the configure options.
This seems to work, but I don't think it works on slow machines (like mine.)
At least, I'm getting fails with the dlxlinux image, but they're pretty
sporadic. This code shouldn't cause any fails.
floppy_bootsig_check: disabled=[0|1]. It is not disabled by default.
Sorry for any inconvenience it could cause
- changed the default (if cmos reg is 0) behavior for the floppy boot signature
check, so the new bios is compatible with older bochs binaries (useful if we
want to use the new bios when we release 1.4.1) :
1 : disabled
0 : enabled
- added info at launch time about the boot device and the floppy boot signature
check
- added a "LBA capable" flag in the ata controller
- fixed opened netdevice name (/dev/net/tun...)
- fixed test on iface name (tun instead of tap)
- cosmetic changes
- added example in .bochsrc
Much of these fixes have been contributed by Frederic Bothamy
- The emulated vga card issues a dimension_update() using the real
screen dimensions and the real font height.
- The gui selects a font with the requested height or it recalculates
the screen height if the font height is not available.
- The text_update() function uses a new variable 'ncols' instead of the
fixed value of 80 for the number of text columns.
I have tested the changes with X11/Linux, SDL, wxGTK and win32. The changes
in the other guis are not tested yet.
cursor size issue a screen update request
- reading an invalid CRTC register returns 0 / writing is ignored
- bit 7 of CRTC address register is always 0
- debug messages for CRTC registers updated / panics removed
- use the number of visible columns in text mode when calculating the screen
width and the cursor position
. ports 0x0400 0x0401 and 0xfff0 : rombios
. ports 0x0500 0x0501 and 0x0502 : vgabios
The rombios log output was previously handled by the unmmapped device
- fixed handling of rotate_on_autoeoi for master PIC in in IAC()
- removed old IRQ handling functions (trigger_irq / untrigger_irq)
- replaced BX_INFO in case of bx_dbg.pic by BX_DEBUG calls
the SMP interrupt handling is to blame. So I'm putting the 1.46 changes
back into the code. Now keyboard.cc is exactly the same as revision 1.51
again. A copy of the changes is now in patches/patch.eks-port64 so that
they can be easily examined by SMP debugging people.
boot of linux 2.2.17 to freeze forever. I don't understand what's being
done in this rev, so I'll ask Dave to check over it and see he can find
anything suspicious.
called <linux/netlink.h> the ethertap module will be defined. If other
OSes turn up that also have ethertap, we can change the test.
- in eth_tap.cc, I replaced the calls to GPL code from maconlinux with
my own stuff.
There is a problem with the existing function rx_timer_handler. It can
retrieve multiple packets from winpcap but returns when it finds one with
the source mac address address instead of ignoring it and processing any
remaining packets.
Replacing the function with the one in the attached file rectifies this.
With this I can browse the network fairly well from the guest NT4 and indeed
see the guest NT4 from other machines on the network.
Mike Lerwill <Mike@ml-solutions.co.uk>
- at the moment we only use hFile so the other pieces of the ADAPTER struct
don't affect how this code turns out. However, it would be safer to include
the winpcap header file instead of hardcoding the structures, which are bound
to change over time.
We should really be using #defines or enums to give these constants
a proper name! Thanks to Peter Tattam <peter@jazz-1.trumpet.com.au>
for the bug report.
Here are the patches (without the serial name fix). Let me know if you want
me to change that. Oh, FYI, my changes also open up the com1 terminal in raw
mode, which makes the emulation much more accurate. You'll also notice that
I added infrastructure for com2->4 in the option parsing. I didn't add it to
the serial code, as I think a bunch of things need to be untangled before
that can work.
This is basically the opposite of the slowdown timer. Instead
of trying to keep the PIT ticks in sync with bochs time, we
keep them in sync with REAL time. This is bad because it creates
unreproducible fails, but it's good if you want to run bochs at
maximum speed on your machine. However, bochs will take all of
the available resources from the machine also.
DO NOT use this with the slowdown timer. Results would be
unpredictable.
