* Adjust BTextView to use B_COMMAND_KEY instead of B_CONTROL_KEY
for wordwise navigation and jumping to the top and bottom.
This requires a shortcut, which is only installed if there is
none already (for the groups B_LEFT_ARROW/B_RIGHT_ARROW and
B_HOME/B_END). As a result, wordwise navigation no longer works
in Mail, for instance.
* drop "protected" from bsd-compat header sys/cdefs.h, as that define
pollutes the global namespace and at least FreeBSD doesn't provide
it anymore
* remove all uses of that macro from libedit, which seems to be the
only user in our tree
This contains both the common ARM(v5) vector handling as well as
the PXA(verdex) specific interrupt controller code, to be seperated
when ARM support for FDT is implemented.
Functional enough to handle interrupts, needs work on KDL support.
* General fixes to get the refactored framebuffer code to work
(across all 3 supported architectures)
* PXA (verdex) specific fixes to framebuffer code.
Now properly displays the (greyed) icons on the framebuffer!
Signed-off-by: Ithamar R. Adema <ithamar@upgrade-android.com>
* since the FDT linux boot method doesn't pass the uimage, we can't
use it to pass the kernel+driver tgz in a multi-file uimage.
* instead we check for the linux initrd properties in the /chosen node.
(cherry picked from my sam460ex branch)
* we first try to find 'serial', 'serial0' or 'serial1' in /aliases
* extract the required properties from the found node and use them
* fallback to the hardcoded UART from the board definition header
(cherry picked from my sam460ex branch)
* add some helpers for Flattened Device Trees, for now a dump call
* dump the passed FDT on startup for now
Conflicts:
src/system/boot/platform/u-boot/Jamfile
(cherry picked from my sam460ex branch)
* For the sam460ex and likely some ARM boards we will try to boot
using the passed FDT, as it's the recommended method now.
(cherry picked from my sam460ex branch)
* U-Boot based loader code will need to manipulate the passed
Flattened Device Tree, no need to reinvent the wheel.
* libfdt itself is dual-licensed GPL/BSD, the later suiting us.
* This comes from <git://git.jdl.com/software/dtc.git> tag v1.3.0
(cherry picked from my sam460ex branch)
nielx+pulkomandy: With the switch from Pootle we switched to the correct
representation of country codes by using lang_COUNTRY (instead of lang_country).
Haiku did not respect that yet and instead always looked for lower case country
codes, thus not finding all the hard work of the pt_BR team.
Other translations currently affected are en_CA and en_GB, though these are not
actively maintained.
+alpha4
On quit, the inspector window needs to detach itself from its current
block and release its reference. Otherwise the next attempt to inspect
the same block will crash since it still contains the deleted window
in its listener list. Also fixes leaking blocks.
This uses custom controls to allow the user to choose between
single and double arrows and none, dots, or line knob styles
in a graphical fashion copied from BeOS Scrollbar preflet.
* Fake-atributes enabled by default (Real attributes require optimization. Too slow with big and fragmented volumes.)
* Upadted mime-table for file extension to mime-type mapping.
* Fix for fake-attributes mode switching.
* Fix: the size of dirent struct in the fake attributes was counted incorrectly
* Directory reading code was re-written from scratch. That fixes hopefully #7573, #4974, #4877, #9082
* Create, rename, unlink routines were completely reimplemented
* Added fully functional support of extended attributes. This fixes#6509
Draw the return key with rounded inner corners instead of square, this
builds on top of the changes made in hrev44709. The secret to rounding
the corners was to draw both the edge and background of the individual
sections before drawing the button's background on top minus the
clipped out bottom left section.
+alpha4 (optionally, purely cosmetic but shouldn't hurt)
The ls command, uses blue color for directories. For a directory that
has write permission for others, it uses green highlighting while
displaying the directory name. However, blue text and green highlight
is difficult to read.
The patch keeps the text color as blue and changes the highlight to
yellow.
Signed-off-by: Jérôme Duval <jerome.duval@gmail.com>
when drawing the following controls:
* SliderBar
* ActiveTab
* MenuField
This is a followup commit based on the change made for buttons in
hrev44708 in response to bug #8700. It is good practice to always preserve
the parent view's clipping constraints.
Stippi and Axel can you you at this commit and make sure this is kosher?
+alpha4
Remove the code that resets the clipping region. However, the
enter button still doesn't draw correctly, the trick it used before
is not working with the change from the last commit.
* Disabling all interrupts prior to ownership handover from SMM to OS
can prevent propper OHCI and PS/2 functionality as described in
#8987 and #8984. In that case SMM does not respond to the ownership
change request. On the other hand not disabling the interrupts can
lead to interrupt storms (discussed in #8085) since no interrupt
handler is installed at that moment. As suggested by mmlr this patch
attempts to address both issues by keeping the ownership change
request interrupt enabled.
* Removed an unnecessary reset upon non-responding SMM for now,
since we reset a few lines later anyway and added TODOs respectively.
That should safe a bit boot time.
Signed-off-by: Michael Lotz <mmlr@mlotz.ch>
* added Icb::FindBlock() to find block in extents.
* MetadataPartition uses extents descriptors found in the metadatafile
to lookup blocks on a physical partition
* uses struct timespec instead of time_t
* added init_entities() to call C++ structures constructors. This is
called at module initialization, C++ constructors are currently not called when
a kernel module is loaded.
* tested with a sample bluray ISO.
* Depends on ff09527e4f (which is +alpha4 *not* +alpha3) :)
* As per commit ML
* Do a direct AddItem vs using an item variable which
breaks program flow.
* A better long term solution may be to enable the debug server
to recover 'system' applications that fail. #9039
* The only implementation that would accept more than 2 TB was the one in
scsi_disk. But even that one was limited to 63 TB.
* Now there is a new utility function devfs_compute_geometry_size() which
does it correctly for sizes up to 2^64 which should be good enough for
quite some time :-)
* This fixes bug #8992.
The signames_haiku.h header got out of sync when merging the real-time
signals branch. It is used when cross-compiling Haiku, since the build
tool mksignames only generates a signal name list suitable for the host
platform.
Fixes ticket #9046.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
The function fill_team_info() completely ignored the user id and the
group id of the process (fields info->uid and info->gid respectively).
Since the info structure was zeroed earlier, the ps output showed uid
and gid of each process equal to zero.
The patch fixes the problem by properly initializing the members with
effective uid and gid. Now the output is correct.
Fixes#8995.
Signed-off-by: Ryan Leavengood <leavengood@gmail.com>
Added an early return in GrepWindow::_OnReportResult(BMessage* message)
in case the report message does not contain matches.
Signed-off-by: Stephan Aßmus <superstippi@gmx.de>
* Matches "Restart Tracker" option in Deskbar
* Only shows up when 0 Deskbar processes exist
* Don't dereference fFileMenu if RepopulateMenus called
on desktop (no menu bar)
* Regenerate desktop menu on each click
* Resolves#9039
* HaikuMailFormatFilter is using the new extract_from_header() method
to retrieve its fields, but that one is often rather slow in comparison.
* Added a test parse_fields() method that outperforms it considerably.
* The controller structure is static, so if you closed the device,
and the driver failed to initialize correctly (ie. finds no codec)
on the second try, it would have crashed accessing an already freed
codec.
* Not sure why it fails to detect any codecs on second open, yet,
though.
* When a block was only used in a sub-transaction, it was thrown away,
but the transaction::num_blocks field was not decremented.
* This caused transactions never considered finished which eventually
led to bug #8942. This does not explain the disk corruption occurring
in #8969, though.
* Don't redefine incorrect cpu headers in framebuffer code
* Drop unused err
* Fix missing parentheses as per gcc
* Fix Raspberry Pi Build
* Fix overo build due to missing header
* Proper framebuffer code is chosen based on hardware
* This change could extend into other arch code as well
* François gave permission to update his copyrights
* Minimal functional change
* These video sources would be good cannidates to be
refactored as classes. (like the arm serial code)
* No functional change. There are some order style issues
in some of the code (the top externs), but I decided to
not fix them as I can't build these atm to test.
* can't test this, it's untested, but similar to ATADevice.cpp
* should no longer panic when hdd > 2TB is connected
* fix request completition in two error cases
* add const to some parameters
sFreeAreaCount wasn't decremented after removing an area from
sFreeAreas, thus causing the loop to continue until enountering and
crashing on a NULL pointer after removing the last area. Introduce
helper methods _PushFreeArea() and _PopFreeArea() to ensure this cannot
easily happen again.
Fixes ticket #8972.
* Correct a situation where disabling the auto swap without
adjusting the swap size would result in an invalid swap
size getting written to the configuration
* Add swap_auto to the virtual memory settings file
* Disable controls based on the context of what is enabled
* hamishm gave permission to adjust his copyrights to Haiku, Inc.
Both are from #8867, created by Justin Stressman. The previous source code icon
was not friendly to those with green color blindness. I also think it was an
ugly green.
Fixes#8867 of course.
* Avoid floating point numbers in the kernel
* Warning would always show if custom swap file in use
* Don't change a custom swap file size if low space occurs
* Ram > 1GB? Don't double the memory for the automatic size
* Heavily based on Hamish Morrison's GCI work with some
modified logic and cleanup. #3723
* Adds automatic swap as well as user specified swap
* Limits:
Automatic: (ram * 2) up to 25% of the disk
User: user specified up to 90% of the disk
* Supports changing the swap disk location
* The ASSERT() I introduced in r44585 was incorrect: when the sub transaction
used block_cache_get_empty() to get the block, there is no original_data for
a reason.
* Added a test case that reproduces this situation.
* The block must be moved to the unused list in this situation, though, or else
it might contain invalid data. Since the block can only be allocated in the
current transaction, this should not be a problem, though, AFAICT.
- BNavMenu now keeps its own copy of the cached types list that's passed to it.
In some circumstances it could happen that the container window would
delete the list and consequently the nav menu would wind up with a pointer
to an invalid object. Probably a regression from the async mouse tracking
rewrites.
Several scenarios of misbehaviour found and fixed, examples :
* Deleting an item sitting before the currently playing item had the effect of
starting the playback of the item before the delete item.
(now it just updates the indexes - setting it to fCurrentIndex - 1 - without altering playback).
* Deleting the last item of the list had for effect of starting the playback of the entry
newingly being the last entry, regardless if the last entry was the active one or not.
Should fix#6689.
* avoid mixing input and output paths when building a tree. In fact, an
audio input shouldn't use only a mixer used for output.
* in case an audio input has more than one input, use these inputs to
build a mux control.
* should help with #8270, #8333
The lowest 4 bits of the MSR serves as a hint to the hardware to
favor performance or energy saving. 0 means a hint preference for
highest performance while 15 corresponds to the maximum energy
savings. A value of 7 translates into a hint to balance performance
with energy savings.
The default reset value of the MSR is 0. If BIOS doesn't intialize
the MSR, the hardware will run in performance state. This patch
initialize the MSR with value of 7 for balance between performance
and energy savings
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* added optional feature package for libpng 1.5.12 gcc4/gcc2 x86 and ppc
* drop libpng sources and headers from the tree.
* added optional feature package for jpeg 8d gcc4/gcc2 x86 and ppc
* drop jpeg sources and headers from the tree.
* In cache_abort_sub_transaction(), the original_data can already be freed
when the block is being removed from the transaction.
* block_cache::_GetUnusedBlock() no longer frees original/parent data - it
now requires them to be freed already (it makes no sense to have them still
around at this point).
* AFAICT the previous version did not have any negative consequences besides
freeing the original data late.
* cache_abort_sub_transaction() was setting the transaction_next pointer to
NULL in order to remove a block from a transaction -- however, it forgot to
actually remove it from the transaction's block list.
* Minor restructuring.
All controls were enabled when toggling fullscreen on and off;
now it recalls the argument last used in SetEnabled() and reuse it
when called in AttachedInWindow() (which occurs in such toggling)
Fixes#8804.
IconView is now only setting the icon with BAppFileInfo when the file is an application,
otherwise relies on BNodeInfo. This avoids adding ressources within data files.
The IconView also wasn't populated correctly when used on data files (by opposition to
application binaries). It now loads the same icon that is shown in Tracker.
* This fixes a regression I introduced in hrev43648; the mouse cursor
was only being hidden in case the controls were visible (ie. only
after an extra mouse move in full screen).
Renamed {32,64}/int.cpp to {32,64}/descriptors.cpp, which now contain
functions for GDT and TSS setup that were previously in arch_cpu.cpp,
as well as the IDT setup code. These get called from the init functions
in arch_cpu.cpp, rather than having a bunch of ifdef'd chunks of code
for 32/64.
Hoard reserves a chunk of the address space to grow the heap into.
As there is a much larger address space available on 64-bit systems,
we may as well reserve a larger chunk of address space (64GB for now,
though could probably reserve a lot more than that and still leave
plenty of room for other areas).
* Selected bg uses B_MENU_SELECTED_BACKGROUND_COLOR
* Selected text uses B_MENU_SELECTED_ITEM_TEXT_COLOR
* Unselected text uses B_MENU_ITEM_TEXT_COLOR
Update BStringItem, but also the custom Listitem code in the
Appearance and Locale preflets.
Before its name was a lie, since nothing was cached.
Another boolean was added because getting the localized name could fail, and we
don't want to pointlessly try again, so relying on fHasLocalizedName won't work
for that.
Since in my tests this was getting called up to 4 times per application when
opening the Deskbar Application menu, this caching should speed that up a bit,
at least when this file name translation feature is turned on.
