Implements enhancement described in #9819
This feature works pretty much as it did on BeOS R5.
When you focus on the color control, the border is drawn blue and
the dot on the red ramp draws as an outline to show that it is
selected. You can push the up and down arrow keys to navigate to the
previous and next ramps respectively and can push right and left to
increment and decrement the color value of the selected ramp.
Clicking on the control no longer gives it focus.
In BeOS the left and right arrows would increment and decriment by 5,
on Haiku they increment and decrement by 1, but, by holding down the
key for a second or so the increment value increases to 5 allowing for
both course and fine adjustments.
On a technical note I split the int32 fFocusedComponent member variable
into 2 int16 member variables, fFocusedRamp and fClickedRamp. I did this
because I needed an entra variable, and can't change the size of the
class without using up another reserved member variable slot. int16
should be more than enough for these variables as they store an index to
the currently focused or clicked on ramp (0-3). Please someone chime in
if this is not okay for FBC in some condition I didn't think about.
devfs_io() can't fall back to calling vfs_synchronous_io(), if the
device driver doesn't support handling requests asynchronously. The
presence of the io() hook leads the VFS (do_iterative_fd_io()) to
believe that asynchronous handling is supported and set a
finished-callback on the request which calls the io() hook to start the
next chunk. Thus, instead of iterating through the request in a loop
the iteration happens recursively. For sufficiently fragmented requests
the stack may overflow (ticket #9900).
* Introduce a new vnode operation supports_operation(). It can be called
by the VFS to determine whether a present hook is actually currently
supported for a given vnode.
* devfs: implement the new hook and remove the fallback handling in
devfs_io().
* vfs_request_io.cpp: use the new hook to determine whether the io()
hook is really supported.
Although syscalls are done through SYSCALL and therefore don't actually
have an interrupt number, set it to 99 (the syscall vector on 32-bit)
in the iframe so that a syscall frame can be identified. Also added
vector/error_code to x86_64_debug_cpu_state for Debugger to use, not
sure why I didn't put them there in the first place.
...from orientation params. Elaborated type specifiers are not needed
for C++ code and removing them makes doxygen happy. Verified working
on both gcc2h and gcc4h builds.
* Under the base URL there are supposed to be the repository files and a
subdirectory "packages".
* Fix the repository URL related confusion introduced earlier. The URL
in
the repository info (and thus in the repository file) is supposed to
be the base URL for the repository. It is not a (potentially)
different base URL for the package files. Package and repository
files were supposed to live in the same directory. Now, by requiring
the package files to live in a subdirectory -- which can also be a
symlink -- we gain some flexibility.
The URL in the repository config is usually the same as the in the
repository info, unless it refers to a mirror site. This allows for
mirrors to copy the original repository verbatim.
* Remove the PackageURL rule and introduce a DownloadPackage rule
instead. The URL for a package file cannot be computed in the jam
parsing phase anymore, as it contains the hash value of the package
list.
* BRepositoryConfig: Add PackagesURL() for convenience.
* Introduce new package attribute B_HPKG_ATTRIBUTE_ID_PACKAGE (valid
only in a repository file) to group the attributes belonging to a
package.
* BRepositoryContentHandler:
- No longer derive from BPackageContentHandler.
- Add hooks HandlePackage() and HandlePackageDone() that bracket the
attributes for a package. This is more explicit and robust than
handlers having to guess when one package ended and the next began.
* BRepositoryCache: Make use of BPackageInfoContentHandler. No need to
duplicate the code for reading a package info from package info
attributes.
...on controls where it makes sense:
- BRadioButton and BCheckBox now return their preferred size as their
maximum.
- BRadioButton, BCheckBox and BTextControl now use left alignment by
default, as this is the most common use case for them.
Motivated by inconsistancies found while documenting BView.
Update copyright year, alphabetize
Variable names normalized:
* pt => point
* r => rect
* p => pattern
* c => color
* msg => message
* a, b and pt0, pt1 => start, end
* r, g, b, a => red, green, blue, alpha
A couple of white spaces fixes.
A couple of !pointer => pointer == NULL fixes.
GetPreferredSize params => _width and _height to indicate out params.
- The argument buffer contained in the debug_{pre,post}_syscall message structures wasn't large enough to accomodate all
arguments for some syscalls on x86-64, which could potentially have led to kernel memory corruption when using syscall
tracing via the debug API. As such, enlarge it to accomodate 64-bit platforms as well.
- Adjust TeamDebugger/SyscallInfo to discriminate the target architecture and read the arguments when trapping console
output. Gets the latter working on x86-64.
* The config space is larger than 255, we need to use an uint16 to access
offsets superior or equal to 256. The current API only proposes an uint8 for this.
This change switches the offset parameter to the uint16 type. Axel hinted that
the used values are the same with such a change (the doc says sign extended to 2 or
4 bytes).
I checked with GCC2 and it's indeed the case when inspecting the memory.
With GCC4, instructions are the same on function call.
* prints info about extended capabilities.
* struct pci_module_info and struct pci_device_module_info are extended with
pci_find_extended_capability().
* Also change kMinCellSize from a uint32 to a float so that it can be used
with std::min() and std::max() instead of min_c() and max_c().
* Set the text controls sizes and margins based on the font size. Also rework
_TextRectOffset() so that it will get the right spacing from by dividing the
palette frame by 3.
* Replace bare numbers and refactor with calculation or magic constant.
* Create a private method _TextRectOffset() which calculates and
returns the vertical text rect offset to use based on the font size.
* Replace 2.0 with new kBevelSpacing constant where appropriate.
* fPaletteFrame calculation in _LayoutView() was refactored but should
not have changed.
* For all identifiers: Rename global settings file to global writable
file. We want to use the respective attribute also for other writable
files, not only settings files.
* User settings file/global writable file info/attribute: Add
isDirectory property/child attribute. This allows declaring global/
user settings directories associated with the package.
This reverts commit 39899cf6626bbcb3b41fd44fc49dd2bdec9a34f9.
Checked with BeOS R5, and this is not how it works, to remain
compatable we need to go back to how this was before.
... <package/hpkg/PackageAttributes.h>, which also defines other
properties (name and type) for each attribute. It does so via a macro
that the caller can define to generate whatever code is desired.
Global and user settings files can be declared. For global ones an
update policy can be specified. If not specified, the settings file is
not included in the package, but created by the program (or user) later.
If an update type is specified, it defines what to do with the settings
file when updating the package to a newer version.
User settings files are never included in the package; they are always
created by the program or the user. If the package contains a template/
default settings file, it can be declared, but for informative purposes
only.
* Add minor_version to hpkg_header and hpkg_repo_header and make
heap_compression uint16.
* If the minor version of a package/repository file is greater than the
current one unknown attributes are ignored without error. This allows
introducing new harmless attributes without making the resulting files
unreadable for older package kit versions.
* Add flags parameter to Init() of BPackageReader and friends.
* Introduce flag B_HPKG_READER_DONT_PRINT_VERSION_MISMATCH_MESSAGE and
don't print a version mismatch error when given.
* package extract/list: Use the new flag.
* Introduce BPackageWriterParameters which comprises all parameters
for package creation, currently flags and compression level. Such an
object can be passed to BPackageWriter::Init() and is passed on to
PackageWriterImpl and WriterImplBase.
* PackageFileHeapWriter: Add compressionLevel property and pass the
value on to ZlibCompressor.
* package add/create: Add options -0 ... -9 to specify the compression
level to be used.
