* Drop ArchUART8260 layer to reduce complexity. It's whole
existance in life was to adjust the mmio alignment.
* Fold architecture mmio alignment into DebugUart
* We could potentially pass a Init(int mmioAlignment)
arg in the future if the macros get too messy.
* Move Barrier code back a layer into DebugUART
* Fixes the arm uart and EFI build
Change-Id: I0f127d902993e9f6e6a03cac8c7c37c0363134bf
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4422
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* We really should get out of the habbit of making up
our own architecture defines.
* __riscv with an additional __riscv_xlen is the
standard that developed... let's just roll with it.
Change-Id: Ieb777d48340ae25a6d66f66133afa0ec5c6da9b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4402
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Including thread.h brings a massive array of things with it from
the kernel thread arch headers, team and thread definitions,
hash tables, linked lists, Referenceable, etc. that the vast majority
of AutoLock.h consumers neither want nor need.
So, put these in a separate header, and adjust all consumers of these
lockers to include the new file.
This change exposes the fact that a lot of files were inadvertently
making use of headers included indirectly through thread.h. Those
will be fixed in the next commit.
Previously these were just using the raw function name, which led
to markers like "Slab_begin". Now we prefix RANGE_MARKER_ so there
is absolutely no chance of confusion, and the symbols are clearly
visible in dumps.
Also add a note that the kernel must be built with -fno-toplevel-reorder
for these to work. (It seems when this was implemented, GCC had not yet
implemented top-level reordering.)
They are only used for debugging with the tracing system in a handful
of places, and -ftoplevel-reorder is enabled with optimizations for
a reason, so it makes more sense just to note this and not to enable
that option by default (i.e. in the off chance someone will want to
use these in non-debug builds, like I did.)
If the timeout is already >= B_INFINITE_TIMEOUT, we do not need
to do any of the following math (which would usually overflow anyway)
and can leave the timeout alone.
Spotted by kernel undefined behavior sanitizer.
* This models the CpuInfo into a cross-architecture
platform_cpu_info
* Originally I was looking at merging this with "arch_cpu_info"
however that is "overall cpu" while CpuInfo is "indivial core
information" packed into an array.
* Since every dtb platform will report individual cores in fdt,
having a common cpu core info struct with at minimum the core
id makes sense.
* This could likely be refined further to some kind of core info
packed inside of arch_cpu_info, but this will fix arm,arm64,etc
for now until someone wants to dive into that.
Change-Id: Ia18a352403cd0da7130c1e637fc205d4311478ef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4363
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Change-Id: I6cb31760519c8ba4542d217d6e68439602eda558
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4356
Reviewed-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I4b8f69271ede117701725f9cce30de5bb8ba30bb
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4332
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
It allows to call destructor function stored in struct object such as
device_manager_info::put_node.
Change-Id: If9162f2f449d2b1c52c39509fa8732f21debf04a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3484
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
- Remove Pause/Resume functions. They are not possible to implement (the
server would time out)
- Fix SetContext(NULL) to do the right thing.
Change-Id: I25ba09bb01ea0fe8a85d774611b33be7dc192028
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4245
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Niels Sascha Reedijk <niels.reedijk@gmail.com>
Fixes:
* scsi: Fix a bug that caused the device capacity to be set
to an undefined value for some large SCSI devices when
READ CAPACITY (16) was used
* ahci: Fix VPD page reporting so that it does not return
undefined values
* ahci: Set the write bit to true when sending a DATA SET
MANAGEMENT (trim) command to a device. The command would
otherwise fail and time out on some devices.
Improvements:
* scsi: Extend the READ CAPACITY (16) support to also
include logical block provisioning information
* scsi: Prefer READ CAPACITY (16) over READ CAPACITY (10)
on devices that are expected to support this command
* scsi, ahci: Enable trim on SCSI and SATA devices that
are expected to support trim and which correctly report
trim support
* ahci: Redo the implementation of the SCSI UNMAP command
* scsi: Redo UNMAP-related code
* scsi: Add support for UNMAP via WRITE SAME (10) and
WRITE SAME (16) commands
* When copying trim ranges between different data types,
make sure that the values don't change (detect overflows)
* Report the number of trimmed blocks even if the trim
operation fails
Change-Id: Ie5fc993bbbc19546b4308138ba10184bf7b9986a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4157
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Fixes:
* Use uint64 instead of off_t when handling offset and size
of the trimmed range in the fs_trim_data structure
* BlockAllocator::Trim: Correct the size of a buffer
* ram_disk, mmc: Do not trim past device capacity
Improvements:
* BlockAllocator::Trim: Because the received offset and size
are ignored by BFS (the functionality is not implemented yet),
return B_UNSUPPORTED if the range does not cover the whole
partition
* ram_disk, mmc: More accurate calculation of the number
of trimmed bytes
* devfs: Add a uint64 version of translate_partition_access()
Change-Id: I24f4c08674f123ad33a5fef6e28996a4ada6ff0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4155
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Makes the case where the loader and the install differ by
release type, so that the icons are rendered in the same
position
Change-Id: I01e48109ce127b202ce5e05544aa2d5a495ed53e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4162
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
This also keeps the functionality of hrev53848, which simplifies the
list of disks searched for bootable partitions; however, it maintains
the previous behaviour of platform_get_boot_partitions that continues
to iterate over a list of possible boot partitions, which should
allow finding a bootable BFS partition better in more circumstances.
Particularly, there are numerous reports of the UEFI loader entering
the boot menu despite it finding a bootable partition, which this
should address.
EFI's device_contains_partition is also structured such that it
compares the disk GPT table of the partition the loader is
querying of the EFI disk's GPT table, in the case that there are
multiple disks, as the most reliable method of comparison, with
a generic fallback for non-GPT disks, which will be less reliable.
This reverts commit 0d932a49ad.
Change-Id: I5fac8608035d56b8bb4dc6c3d495ec6db42fa9b7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4149
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* This will break previus ways to store settings (as it only stored a struct)
* Now we use BMessage to save data.
* Added some stuff to SettingsMessage.
* Fix a bug in BluetoothSettingsView::_GetClassForMenu() and SettingsMessage::SetValue
Change-Id: I6a0fa1564e78460258f480947592eb4007985007
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3887
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
the AC flag in eflags/rflags, pushed in the iframe by the CPU, is kept intact after handling the exception, since the fault handler is run with the faulted iframe and does a simple jump. The AC flag would otherwise be set until the syscall returns to userland.
Change-Id: I24f763032ab98029dd162fb411e1541586451606
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4040
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
It is not present in BeOS R5 and it just call unload_driver_settings.
Replace delete_driver_settings usages with unload_driver_settings.
Keep the symbol on x86 for binary compatibility.
Change-Id: I1382710e3a4cb5c65d1249ea0e5880891e6800e4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3485
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
