* BCM2708 defines no longer assume 0x20 address
We will be throwing away the blob memory mapping
and using our own.
* Use existing blob mapping to turn GPIO led on pre mmu_init
* Remap MMU hardware addresses from 0x7E. We could map each device,
however the kernel will throw away the mappings again anyway. For
now we just map the whole range and use offsets.
* Serial uart no longer works, however at least
we know why now :). Serial driver now needs to
use mapped address.
* Use U-Boot mmu code as base
* This will be factored out someday into common arch mmu
code when we can read Flattened Device Trees
* Move mmu_init after serial_init.
Temporary change as we will want serial_init to use
memory mapped addresses... for debugging.
* introduce a DebugUART baseclass,
* rework 8250 and PL011 implementations from kallisti5 to inherit DebutUART,
* each arch should override the IO methods to access registers.
* on ARM registers are 32bit-aligned.
* U-Boot still works for the verdex target.
* rPi still compiles, needs testing.
* Still some more consolidation needed to allow runtime choice of the UART type (as read from FDT blobs for ex.).
* serial.cpp should probably mostly be made generic as well.
* didn't touch x86 or ppc yet.
* Enable/Disable makes more sense and matches
platform loader serial functions.
* Rework PL011 code after finding a PDF covering
the details of it.
* Rename UART global defines in loader to be more
exact about location
* This makes things a little more flexible and
the interface to use the uarts cleaner.
* May want to make a generic Uart wrapper
class in uart.h / uart.cpp and call drivers
as needed from there.
* Avoid name collisions
* This uart stuff may work better as a class at
some point, however I didn't want to rock the
u-boot boat *too* much as I don't have the
hardware to test.
* Add nested function wrappers to allow usage of other
uart drivers depending on board. We may want to use this
on other platforms at some point (haha, maybe)
* Make Kernel ARM UART slightly more generic
through (BOARD_UART_CLOCK) configured per board
* Add initial Raspberry Pi serial code
* Still rough and non-working
* Change ShowTip() point parameter name to where.
* Add a parameterless ResetWindowFrame() overload that get's the current
where and calls ResetWindowFrame(BPoint where) which does the actual
work. FrameResized() calls this parameterless ResetWindowFrame()
method instead of doing the work in that method. This is functionaly
the same but allows me to call the parameterless ResetWindowFrame()
elsewhere.
* The areas allocated for BBitmaps were never deleted, even though the
app_server deleted its part when the memory got freed.
* This resulted in a constant memory increase if the application in question
would operate on many changing large bitmaps, like photos.
* Since the bitmaps are reference counted, we don't actually know when to delete
the areas, so that the app_server now notifies the client whenever that is
possible.
* This might fix#6824.
* This removes the fVisibleToolTip member from BView, and fixes bug #5669;
BToolTipManager::ShowTip() now gets the owner of the tool tip as an extra
parameter.
* Removed the work-around to hide that bug.
* Improved ToolTipTest application to include more test cases like a view that
periodically update its tool tip via SetToolTip(const char*), and one that
sets a new tool tip every second.
* Furthermore, added a test that shows that inner views inherit the tool tip
of their parents.
* Fixed another bug in BToolTipManager::ShowTip() that would release an
extra reference to the tool tip currently shown.
* First steps at getting card command processor wired
up to the ring buffers.
* Code doesn't run yet as I have *no* idea what happens
when these rings are in an invalid state.
* rename B_TRANSLATE_CONTEXT to B_TRANSLATION_CONTEXT and
B_TRANSLATE_WITH_CONTEXT to B_TRANSLATE_CONTEXT, squashing a TODO
* adjust all uses of both macros in Haiku's source tree
* use correct header guard for collecting/Catalog.h
The renamed macros require adjustments to all external applications
using catalogs.
* move versions of the B_TRANSLATE_...-macros used during collecting
of catalog keys to a specific header file, which will only be picked
up when running collectcatkeys
* fix a couple of build problems during the preprocessing of the libbe-
sources when extracting catalog keys, all due to private headers not
being found
* move ZombieReplicantView.h from kits/interface to
headers/private/interface, as this way it can be picked up when
building the libbe catalog
* rename BCatalogAddOn to BCatalogData, since it doesn't represent an
add-on, but rather the catalog data provided by an add-on
* move BCatalogData out of Catalog.{h,cpp} into its own header and
implementation file
* drop BCatalogData::MarkForTranslation() methods, they're not needed
* drop BCatalog::GetNoAutoCollectString() methods, they're not being
used anywhere
* cleanup the B_TRANSLATE_... macros somewhat
* add versions of the B_TRANSLATE_MARK_... macros that are meant to be
used in void context (when the string isn't being used by the program,
just meant to be picked up by collectcatkeys).
* adjust several apps to use B_TRANSLATE_MARK_..._VOID where needed
* adjust users of BCatalogAddOn accordingly
* it's bad practice to do a 'using <namespace>' in a header, as that
is very likely to have unintended effects, so drop those from a couple
of private Locale headers
* adjust files all over the locale kit in order to fix the problems
(by explicitly importing the required classes in the implementation
files)
* move EditableCatalog to its own header and implementation file
* move problematic BCatalog::CatalogAddOn() to EditableCatalog
* adjust Locale tools accordingly
AMD C1E is a BIOS controlled C3 state. Certain processors families
may cut off TSC and the lapic timer when it is in a deep C state,
including C1E state, thus the cpu can't be waken up and system will hang.
This patch firstly adds the support of idle selection during boot. Then
it implements amdc1e_noarat_idle() routine which checks the MSR which
contains the C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27) before
executing the halt instruction, then clear them once set.
However intel C1E doesn't has such problem. AMD C1E is a BIOS controlled
C3 state. The difference between C1E and C3 is that transition into C1E
is not initiated by the operating system. System will enter C1E state
automatically when both cores enters C1 state. As for intel C1E, it
means "reduce CPU voltage before entering corresponding Cx-state".
This patch may fix#8111, #3999, #7562, #7940 and #8060
Copied from the description of #3999:
>but for some reason I hit the power button instead of the reset one. And
>the boot continued!!
The reason is CPUs are waken up once power button is hit.
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* make the system catalog a BCatalog instead of a BCatalogAddOn*,
such that using a non-existing system catalog won't crash but
simply return the untranslated string instead
* rename MutableLocaleRoster::GetSystemCatalog() to LoadSystemCatalog()
and adjust it to use BCatalog::SetTo() in order to replace the
data used by the given catalog
* adjust all users of gSystemCatalog accordingly
* General DisplayPort functions in common dp.cpp
* DP port information struct in common header
* Please don't use this private accelerant common DP
code just yet as it is very early.
* If dladdr can't find an exact match, it returns the nearest symbol
less than the given address.
* If no suitable symbol can be found, but the address is within a
loaded library, dladdr returns the library name and base address.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
* Make the locale kit a part of libbe.
* Drop the LocaleBackend kludge used from within libbe (and from
other places, too) in order to access system catalog strings.
This is now done via gSystemCatalog, which is provided and initialized
by libbe.
* Drop all references to liblocale.so from all Jamfiles.
* Add legacy symlink liblocale.so in order to keep optional packages
that rely on it in a working state.
TODO: the documentation hasn't been updated.
* The AtomBIOS timeout fix has made my DP bridge
stop working
* The current DisplayPort code is a little lacking
on DP link training... I think thats the cause.
* This puts the first steps towards DP training
in place.
* I plan on trying to make some of this DP stuff
common accelerant stuff after it works.
