* Also don't install the GCC2 package on a GCC4 based hybrid, as it's again not
usable without proper manual setup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29160 a95241bf-73f2-0310-859d-f6bbb57e9c96
These all work on pure GCC4 images as well because they do not use any of our
C++ APIs.
* Remove the GCC4 package from hybrid installs though, as it's not usable
without proper setup. Also the trick with rewriting the symlink obviously
doesn't work because symlinks are done way earlier than unzipping the optional
packages when building the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29158 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enable -Werror on GCC4 builds as well (limited to the same selected targets).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29118 a95241bf-73f2-0310-859d-f6bbb57e9c96
and also comes with proper default includes.
* If installing GCC4 as part of a GCC2 based hybrid build, re-setup the gnupro
link that is overwritten by the GCC4 package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29085 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed either when building with GCC4 or when making a hybrid. Can be
installed separatly as well. Have fun :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29046 a95241bf-73f2-0310-859d-f6bbb57e9c96
include_next work properly with newer headers. GCC 4.3.2 has a <cstddef> in its
C++ headers for example that does an include_next of <stddef.h>. The latter is
located in the C headers. For this to work, the include directory for the C
headers needs to be specified later than the one of the C++ headers.
With that Haiku is now completely buildable with GCC 4.3.2.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28995 a95241bf-73f2-0310-859d-f6bbb57e9c96
the main() signature are not applied and do not generate errors when violated.
Our bootloader has a non-standard main() signature for example, which is of
course fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28983 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
It's getting annoying having to maintain so many identical driver lists... maybe those should be factored out in some way...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28654 a95241bf-73f2-0310-859d-f6bbb57e9c96
code duplication and will make maintaining it much easier.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* adjusted libtextencoding's Jamfile
* added libiconv.so to image
* added iconv headers to optional package Development (under 3rdparty)
* removed old private version of libiconv from textencoding
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28631 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Updated autoconf, automake, libtool, texinfo, flex, and bison to
their respectively current version. They are installed in /boot/common
now.
* Removed the /boot/home/config/bin/perl and /bin/m4 symlinks again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28582 a95241bf-73f2-0310-859d-f6bbb57e9c96
source and it works fine.)
* Updated WonderBrush package. The new version is compiled on Haiku and
improves the installation of the document mimetype (finally a more reliable
sniffer rule, thanks to Francois for helping me with this). The About window
is fixed to no longer use a hardcoded font file path. This version only runs
on Haiku, but it is fully unlocked! Next version with new features won't be.
Also comes with a new vector icon for the native document type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28570 a95241bf-73f2-0310-859d-f6bbb57e9c96
redownloading the package.
* Added link "vlc" to "VLC media player" in /boot/common/bin to make it
easier on people launching VLC from the command line.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While I was at it, I also removed the extra screen savers until Ryan fixed
the issue (bug #2339).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28547 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added GNU M4 1.4.12 package to the Development optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Firefox -> 2.0.0.17, includes new HVIF icon
* VLC -> renamed VLC to "VLC media player" which is what the official name is
* Pe -> updated to most recent version (called it RC2) which includes a few
fixes and new HVIF icons for most of it's supported document types. Renamed
the application folder to "Pe" and removed the "Drag lpe here to install"
link. Renamed the application itself to "Pe".
Hope these changes are alright with everyone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28485 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a small app "checkfs" to check partitions and put it on the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28435 a95241bf-73f2-0310-859d-f6bbb57e9c96
installation has been relocated to /boot/common and socket support is
enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28364 a95241bf-73f2-0310-859d-f6bbb57e9c96
the wrong Link actions were used (always the no-attributes-support ones
which remove the target first), for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28304 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactored a User Guide style documentation from the previous Welcome
documentation. The Welcome documentation links to the User Guide, the
biggest difference is that there is now a separate contents page.
* Improvements to the text.
* Added Tracker-Add-ons page.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28211 a95241bf-73f2-0310-859d-f6bbb57e9c96
Make sure you rm generated/downloads/NetSurf.zip to get the new replicable one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28190 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added opengl to build be api headers
* define USES_BE_API for gen_matypes
this should fix the build for Linux which don't provide GL headers :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28050 a95241bf-73f2-0310-859d-f6bbb57e9c96
please let us know. Especially shutting down your system can potentially
change its behaviour (maybe even for the better, but maybe not :-)).
* Added the GCC2 KDL demangle module to the image by default.
* White space cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28020 a95241bf-73f2-0310-859d-f6bbb57e9c96
build. This is mostly complete, excepting BBufferConsumer's virtuals are not
yet implemented, and needs more testing to ensure that the encoded stream is
correctly read from the camera, though based off preliminary tests by Francois,
detection/publishing at least seems to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27965 a95241bf-73f2-0310-859d-f6bbb57e9c96
copied to /boot/beos/documetation/welcome and a link to welcome.html
is placed on the Desktop. The mime_update.sh script makes sure that
the mime type of the html files is set. However, Firefox has a problem
when it is launched for the first time via double clicking an HTML
file. Apparently, it initializes some settings and relaunches itself,
which in turn makes it forget to open the file. A second problem is
annoying as well: When launching Firefox to display a local file,
it will always open a second window with the default web location.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27868 a95241bf-73f2-0310-859d-f6bbb57e9c96
HAIKU[_KERNEL]_WARNING_CCFLAGS.
* Added -Werror for various parts of the source tree for the gcc 2
build. Feel encouraged to add more.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27842 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
first remove the target and its attributes (if any). Before gcc would
just unlink it and leak the attributes, which could lead to later
mixups, if the file's inode ID was re-used. As reported by Rene this
improves the attribute mixup situation, but doesn't solve it
completely. So that status quo is still the same: When using the
generic attribute emulation one has to build from the scratch to be
sure all attributes are fine.
* Got rid of superfluous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27385 a95241bf-73f2-0310-859d-f6bbb57e9c96
the revision failed using "svn info".
* While there is no official git tree, this should help those people using
svn over git.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26977 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Tracker add-ons folder with short cut (like done for Backgrounds). Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26739 a95241bf-73f2-0310-859d-f6bbb57e9c96
- For simplicity we'll force using only insn common to 020 to 060, mostly to avoid unimplemented floating point ops in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26647 a95241bf-73f2-0310-859d-f6bbb57e9c96
the scheme that Ingo started and thus installs the license and copyright to the right
places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26603 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add cygwin specific options.
* Cygwin cannot handle -fPIC option and throws warnings, thus we only use it on non windows platforms for the host tools.
* Windows uses PATH instead of LD_LIBRARY_PATH, so before calling a host tool this environment variable needs to be expanded... Brilliant...
* Using jam on Windows is kind of complicated, as the cygwin included gcc creates executables with a .exe extension. When jam parses dependencies for being up to date it ignores this extension again and tries to rebuild the executables again and again. This hack removes the extension after successful linking. Though jam has a SUFEXE variable for cygwin builds, we cannot use this one directly as crosscompiled targets do not have an extension, it is complicated to use the same jam for both platforms. A more clean attempt would be to check for the extension on each host target depending on the platform. This should be fixed later on.
* Btw. Say hello to Haiku compiling successfully on Windows :) with one patch to be discussed for jam...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26590 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used to update an installation without erasing the whole volume (ie. it
works like install-haiku on BFS capable platforms).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26435 a95241bf-73f2-0310-859d-f6bbb57e9c96
straight all-static build, with only OpenSSL as dependency. Be sure to include
OpenSSH (and set a hostname) if you intend to use svn+ssh. Should work with
svn, svn+ssh, http and https. Feel free to replace with a proper dynamically
linked version once available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26158 a95241bf-73f2-0310-859d-f6bbb57e9c96
screen mode from the command line.
* With its "--fall-back" parameter, it's also thought to be called from BWindow
when a specific shortcut has been pressed (similar to screenshots) - this
part is not implemented yet. Anyone against <Command><Control>-<Escape>?
* Added it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26150 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the OSS media add-on (node), since Haiku comes with it's own
version. Therefor you can now add the OpenSound optional package and
it will just work out of the box, unless you have native drivers that
fight over the hardware with OSS. It is no longer necessary to delete
the opensound.media_addon from the home/config/add-ons/media folder.
If you don't build from scratch, make sure you delete
generated/download/OpenSound.zip or the change won't take effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26064 a95241bf-73f2-0310-859d-f6bbb57e9c96
less.
* Added /etc/vim/vimrc. Besides fixing key mappings it also disables
compatibility mode and adjusts some settings to make using vi a more
pleasant experience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26028 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
-nostdlib disables that for executables although it should be enabled by
default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25785 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
either, it just hangs there trying ot connect and eventually times out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25751 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
packages. Print an error message for unavailable packages.
* Detect the build of a GCC2/GCC4 hybrid image and install GCC2 packages
on a GCC4 build where no GCC4 package is available. I did not test
every GGC2 package on a GCC4 build, though I have not found any that
does not work. If a package gives problems, feel free to disable it
for the hybrid build or send me a note.
* Add new optional package for Beam. Though I could not test it since,
SATA AHCI does not work for me ATM. I know that Beam 1.1 for BONE is
unable to retrieve mails (times out). Maybe the R5 version has better
luck, will check later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25695 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pthread_cond_t internals public. This is necessary to support
process shared condition variables. Fixed initializer macro.
* Made the pthread_rwlockattr_t structure opaque.
* pthread_t is no longer typedef'ed to int. It's the pointer to the
internal _pthread_thread structure.
* Removed __get_pthread(). pthread_self() can be used instead.
* No longer tunnel the pthread exit value through Haiku's thread exit
value. We do have a separate field in the _pthread_thread structure
for it, now.
* Handle detaching of threads correctly.
* pthread_rwlockattr_{g,s}etpshared() use the
PTHREAD_PROCESS_{SHARED,PRIVATE} constants, now.
* Commented out yet unsupported structures (barriers, spinlocks).
* Rebuilt APR optional package. The pthread changes weren't binary
compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made the output easier to observe
* added the sigsuspend_6-1 test to the package
* made the fork_3-1 test return when it fails
* added output to the pthread_once tests
* other minor cosmetic changes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25567 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the targets/symlinks added to a container/Haiku image directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25535 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
- fix build (at least CodyCam), NETAPI lib is now libnetapi for Haiku...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25488 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddLicenseToHaikuImage that can be used in optional package definitions
to add a copyright entry in AboutSystem and add a license file to
/etc/licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25313 a95241bf-73f2-0310-859d-f6bbb57e9c96
(just "sshd"), ATM. Not sure how we want to deal with daemons, yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25311 a95241bf-73f2-0310-859d-f6bbb57e9c96
a bit:
* Added directory /etc/post_install, which can contain scripts that will
be executed on the first boot.
* Moved the mimeset invocations to such a script. Use the "-apps"
option instead of "-all". Since create_app_meta_mime() (and thus
mimeset) work recursively now, running the commands does actually have
an effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25309 a95241bf-73f2-0310-859d-f6bbb57e9c96
paths by default, but I guess we want to keep it that way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25137 a95241bf-73f2-0310-859d-f6bbb57e9c96
value range propagation optimization results in broken code with the GCC4
version we are currently using. Added TODO to retest/remove this flag when we
update our GCC4 compiler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25054 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Whenever unzipping a zip archive to the image, we do first check, if
it contains an .OptionalPackageDescription file. If so, its contents
is appended to AboutSystem's "COPYRIGHTS" attribute, which will cause
the respective info to be shown in the about view.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also removed the header files that belong to those files.
* Only kept the userland_ipc.h header for now, to remember us about the
former userland server driver (that I also removed - it can always be
resurrected from SVN if needed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25045 a95241bf-73f2-0310-859d-f6bbb57e9c96
again. I'm not totally sure why that is, but the set-uid permission kept
disappearing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25036 a95241bf-73f2-0310-859d-f6bbb57e9c96
new filesystem interface.
* Renamed sISO* to gISO* though as they are in fact not static.
Briefly tested and works as expected. Thanks for your work Dustin!
Closes enhancement #2089.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24994 a95241bf-73f2-0310-859d-f6bbb57e9c96
was, thanks to the detailed instructions from Ingo, quite doable.
* Ported the (deprecated and now publically removed) notify_listener() calls
to the respective new notify_* calls.
* Fixed debug build.
* Added the FAT filesystem back to the image.
I only tested the filesystem briefly and everything seemed to work as expected
(mounted the FAT part of my bootable Haiku memory stick, opened a few files
and copied something to it). At least it should not be any more broken than
before the interface changes ;-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24987 a95241bf-73f2-0310-859d-f6bbb57e9c96
suites and the like, and moved the image jam code for PosixTestSuite
and libMicro there.
* Some cleanup (line length, use grist).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24970 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
Haiku. Support for undefined symbols is nice in principle, but not
really needed for building Haiku itself, and can get little annoying, if
one really just forgot to link in a symbol or has a typo in a function
name in C code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24814 a95241bf-73f2-0310-859d-f6bbb57e9c96
by default (new option "-H" will create the header only). Option "-c"
will clear the image.
* Adjusted build_haiku_image accordingly. vmdkimage is way faster and
more portable than the former vmdkheader+dd combo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24784 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions by ones reading /etc/{group,passwd}.
* Added quasi-standard getpwent_r() and getgrent_r().
* Added _SC_GETGR_R_SIZE_MAX and _SC_GETPW_R_SIZE_MAX sysconf()
constants.
* Moved initgroups() and getgrouplist() definition to grp.cpp. They use
the same backend as the <grp.h> functions.
* Set the permissions of files created by the build system to what they
should be on the image (executables: 755, others: 644). Otherwise only
root could do anything under Haiku.
* Added build system variables HAIKU_ROOT_USER_NAME and
HAIKU_ROOT_USER_REAL_NAME to customize name and real name of Haiku's
root user.
* Added build system rules AddUserToHaikuImage and AddGroupToHaikuImage
for adding additional users and groups (by default only root user and
group and a "users" group are created).
* Adjusted BIND port and coreutils config.h files according to what
features have become available.
* Fixed HAIKU_DOCUMENTATION_OBJECT_DIR definition. Untested, but it used
a wrong variable name before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24750 a95241bf-73f2-0310-859d-f6bbb57e9c96
TODO:
- Implement/integrate low level stuff (see BootDrive.h)
- reading the partition table
- reading/writing the MBR
- writing the boot menu
- Open file dialog for selection of backup MBR file
- Write error message in case of I/O errors
- Test
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24689 a95241bf-73f2-0310-859d-f6bbb57e9c96
- fixes off by one pixel bug reported by stippi.
- fixes Unicode option to use UTF-8 instead of UTF-16.
- compiled within Haiku using new Development package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24685 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added additional parameters to DeferredSubInclude. It's now possible
to specify an alternative Jamfile name.
* Added DeferredSubInclude example to UserBuildConfig.ReadMe showing the
new feature.
* Moved ExecuteDeferredSubIncludes in the root Jamfile before the
inclusion of HaikuImage, NetBootArchive etc., so that targets defined
in the subdirectories are already known there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24680 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
and sorted definitions alphabetically.
* Updated Pe package to 2.4.1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24659 a95241bf-73f2-0310-859d-f6bbb57e9c96
optional packages, i.e. installing one will install all its
dependencies, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24658 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the addition of the libpng and zlib headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24656 a95241bf-73f2-0310-859d-f6bbb57e9c96
finally created a solution to avoid that: Header files that contain
configuration settings (and nothing else) go to build/config_headers.
To change settings, create a directory build/user_config_headers (which
is ignored by svn), copy the respective header there and modify it at
your leisure. Currently only tracing_config.h has been moved to the new
location, but more files will follow eventually. It is also recommended
to move optional macro definitions in Jamfile (as for BFS) to a config
header instead; the build system will then automatically rebuild on
changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24611 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the name of the header directory on the image.
* Renamed the "gnu" header directory on the image to "3rdparty" and
created a "gnu" symlink for compatiblity.
* Added zlib and libpng headers to the "3rdparty" header dir.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24600 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory to the image. It supports exclude patterns.
* Changed Add{Source,Header}DirectoryToHaikuImage to use the
CopyDirectoryToHaikuImage rule. The special handling in the
build_haiku_image script is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24586 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the Development optional package. It will now also install
gcc/binutils as well as autoconf, automake, libtool, texinfo (and
their dependency perl).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24567 a95241bf-73f2-0310-859d-f6bbb57e9c96
suffix or otherwise package names with dots in them would be mangled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24566 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Install libncurses.a.
* Copy the cpp headers from our repository; don't use the compiler
headers. This needs some more shuffling around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24543 a95241bf-73f2-0310-859d-f6bbb57e9c96
so one can set it to the static libroot, if desired.
* Generic attribute emulation:
- Added build tool rm_attrs, a simple "rm" replacement, which also
removes the attributes directory for a given file.
- Added build/scripts/rm_attrs shell script, which wraps the
invocation of the rm_attrs tool. If it doesn't exist yet, the
ordinary rm is used.
- The RM jam variable refers to the rm_attrs script now, i.e. whenever
something is removed by the build system, the attributes are removed
too (if the build tool has already been built, that is).
- Removed the shell function attrrmrf() in build_haiku_image. We use
the rm_attrs tool instead, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24528 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also install _G_config.h.
* /boot/develop/headers/cpp is a symlink to g++'s headers, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This allows you to use a GCC compiler completely with native headers,
all you have to do (after having unpacked and moved GCC to the correct
location), is to replace its "lib/gcc-lib/i586-pc-beos/2.95.3-beos-060710/include"
directory with this one. There is no need for R5 headers anymore,
then.
* Removed extraneous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24469 a95241bf-73f2-0310-859d-f6bbb57e9c96
builds on Linux with gcc 2 and 4, but the images do even run. :-) Not
tested on BeOS.
* Removed stddef.h and stdarg.h. They are provided by the compiler.
* Adjusted size_t.h, wchar_t.h, and wchar.h accordingly.
* Made stdio.h avoid gcc 2.95.3's fixincludes hack stdio_va_list
* Added gcc 2.95.3 headers to the repository. They are used instead of
the headers of the gcc 2.95.3's we use to compile Haiku with. Should
avoid build problems with the BeOS native compiler.
For sake of personal recreation you can rebuild the cross gcc 2.95.3,
but the only thing that changed is its header directory
(lib/gcc-lib/.../include), which isn't used anymore. Replacing it with
headers/build/gcc-2.95.3 should have the same effect as rebuilding, BTW.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24413 a95241bf-73f2-0310-859d-f6bbb57e9c96
change resulted in "version mismatch between boot loader and kernel". So
apparently the size of some type changed unintentionally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24408 a95241bf-73f2-0310-859d-f6bbb57e9c96
under Haiku overrides ours anyway.
* Adjusted size_t.h, wchar_t.h, wchar.h accordingly. This should fix the
annoying "ssize_t redefined" warnings when compiling under Haiku.
* When building Haiku the gcc headers come first in the include
search path now, as it should be. The respective TODO suggested that
this might break the build depending on compiler version and host
platform. I've tested with Linux gcc 2 and gcc 4, which work fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24406 a95241bf-73f2-0310-859d-f6bbb57e9c96
uncommented the meaty lines again. Added one or two more explaining
sentences.
* Created a concise UserBuildConfig.sample with very few comments and
only the most interesting (commented out) example lines for those
people who don't read the UserBuildConfig.ReadMe.
I hope everyone can live with this solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24350 a95241bf-73f2-0310-859d-f6bbb57e9c96
* reordered addons alphabetically like we do for all plugins
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24349 a95241bf-73f2-0310-859d-f6bbb57e9c96
works fine without those, the keymap file will be generated.
* Supplied the removed lines as example in UserBuildConfig.sample for how
to supply these settings during image generation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24298 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added VLC optional package. (I repackaged the latest BeBits version and
put it on www.yellowbites.com, which is a) much faster to download at
least from Germany and b) has the Haiku vector icon.)
* Exchanged the Pe package for a recent SVN build which also has the Haiku
vector icon.
Going to test all these changes on a Linux host soon, seems to work fine
on a BeOS host.
NOTE: The WonderBrush package has gotten a silent update, it includes the
icon in the resources now too, like the other packages with Haiku icon and
also fixes a problem in the Navigation view.
NOTE 2: The build system does not download packages again if generated/download
already contains a .zip with the name of the optional package. So you need
to delete those to get the recently updated Vision, Pe and WonderBrush
packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24291 a95241bf-73f2-0310-859d-f6bbb57e9c96
built directly out of Haiku's build sys, which is to say against haiku's
headers, etc. directly, and b) includes Stephan's HVIF icon (thanks!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24289 a95241bf-73f2-0310-859d-f6bbb57e9c96
Either app_server doesn't start it, or it exits right away...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24262 a95241bf-73f2-0310-859d-f6bbb57e9c96
/boot/home/config/settings.
* The Bootscript will check for the existance of this file and updates the
mime database with all the applications and preflets that come with the
install. Then it removes the indicator file.
This fixes the problem that all the apps are not known to the system until
you run them once. Ie "Open With..." and such stuff works out of the box.
Feel free to find a more elegant way, I just found this simple and effective.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24247 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfig the user just have to uncomment whatever he/she wants. This
is easier than commenting out almost everything.
- Added entries for Pe and Links optional packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24240 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added legacy_sata just in case.
At least now qemu finds the bfs track and tries to run Bootscript, but I get loads of ide timeouts so it ends up panicing anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24224 a95241bf-73f2-0310-859d-f6bbb57e9c96
putting the network "services" config file at the wrong place.
* Removed some dead code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24118 a95241bf-73f2-0310-859d-f6bbb57e9c96
Do not attempt to install optional 3rd party packages when building
a GCC4 version of Haiku. I think there has been some discussion on this
topic before, with a more advanced solution, but for the time being, this
should be ok.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24087 a95241bf-73f2-0310-859d-f6bbb57e9c96
directories. Note that you need an updated "sed" (from the Haiku
repository) if you want to use that rule.
* The "Development" optional package now installs the Haiku headers
needed to build stuff (ie. "os", "gnu", and "posix"). It also makes
a symlink "be" so that we can still use the BeOS compiler with its
builtin header paths.
* Fixed AddVariableToScript for older shells that do not support '+='.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24058 a95241bf-73f2-0310-859d-f6bbb57e9c96
entire screen when exiting the kernel debugger. It sets up a thread that sends
a message to the (currently hardcoded) desktop message looper. The desktop then
does mark the whole screen dirty which causes a full redraw.
Since interrupts need to be enabled I went with an asynchronous thread and
releasing a request sem in the add-ons' exit hook.
Added the add-on to the image as it shouldn't hurt to have it for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24025 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed the way the VMware image is built. Instead of creating a normal
image first and then adding vmdk header and that image, we create the
VMware image in one go, now. Therefore "jam update-vmware-image ..."
does now actually update the VMware image directly, instead of updating
the normal image and recreating the VMware image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23972 a95241bf-73f2-0310-859d-f6bbb57e9c96
(P5W-DH motherboard have two of those gigabit ethernet controllers),
seems to work fine.
* Add libglut.so alias to the development libs symlinks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23902 a95241bf-73f2-0310-859d-f6bbb57e9c96
BLayout implementation (BALMLayout) using the Auckland Layout Model
(ALM). The original ALM was implemented by Christof Lutteroth, the
Haiku/C++ version by James Kim.
The code needs some review, but the test programs seem to work fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23889 a95241bf-73f2-0310-859d-f6bbb57e9c96
* NetBootArchive still used "agp"; replaced it with agp_gart, and added the
Intel GART module as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23873 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added it to the image, and configured it to be used.
* Currently, it cannot transfer files over 64 KB for some reason
("Message too long").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23843 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added explicit example for enabling debugging for a subtree.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23818 a95241bf-73f2-0310-859d-f6bbb57e9c96
one has actually been compiled on Haiku and uses better network options, since
it uses BONE headers. On Rene's machine, this version is running since 2.5
days under Haiku. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23795 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
having these
* added DriveSetup to the image
* added optional package Pe, enable it in your UserBuildConfig
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23670 a95241bf-73f2-0310-859d-f6bbb57e9c96
You know, moving stuff out of your way just because they don't work won't fix them...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23522 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
