* remove manual sDisplayMode and make use of mode_list_area via Axel's common accelerant code using vesa as example
* move mask enabled write32 function to accelerant with write32 calls
* move register offsets into mode.h headers
* rename DxMode* to CardMode*
* make adjustments and implement radeon hd mode setting further
* remove previously defined kStdModeTimings
* hardware mode setting still needs work
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41374 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
the cached pci_info and writes the new value into PCI config space. Drivers
using either mechanism to enumerate devices will therefore get the updated
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41364 a95241bf-73f2-0310-859d-f6bbb57e9c96
a pointer (also as written would prob crash); use new mode sanity check on the provided static mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41341 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Adds IPv6 fragmentation support and some partial work to enable configuration of IPv6 in net_server. Not currently in the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the session module to create an extra session for existing audio
tracks.
* Let cdda also recognize "audio partitions" as published by the session module.
* If there is only a single session, the session module now gives file system
drivers the chance to play with the device directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41288 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when removing a transfer, if this was the only one in the list, we set fLastIsochronousTransfer to NULL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41286 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use uint64 instead of off_t for the frame numbers.
* Shuffled Volume methods around to match the declaration order.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41282 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated several firmwares for iprowifi4965 and iprowifi3945. Tested on iprowifi4965 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41240 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added _ProbeCommitFormat() and _SelectBestAlternate()
* to be noticed: BUSBInterface::SetAlternate() isn't const and there is no mean to get a non-const BUSBInterface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41196 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added SuggestVideoFrame() so that this can be overriden.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41195 a95241bf-73f2-0310-859d-f6bbb57e9c96
simple click or becomes a tap drag. ALPS does not send these events.
- Enable ALPS.
- Force const edge motion speed. Synaptics sends events with a certain frequency ALPS don't. Even worse ALPS stops sending events durring a edge motion when you don't move your finger. Current
speed is 200 pixel/s. In theory synaptics has different event frequency modes which would result in a different edge motion speed in the previous approach. Please check if synaptics works/speed is correct. Will try to get a synaptics laptop for testing...
- fix class variable names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41190 a95241bf-73f2-0310-859d-f6bbb57e9c96
makes it abort earlier when no firmware files are available. Note that this
worked some time ago and seems to be an edge case triggering an issue in the
slab allocator. Freeing the buffer (possibly allocated with an invalid size)
in the error case triggered the assert in #6679. That should probably be looked
at, but meanwhile this should close#6679.
Note also that looking for firmware is deliberatly done only at open() time,
since the configured operational mode determines the firmware to be used and
having the firmware loaded later makes the mode easily changeable at runtime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41144 a95241bf-73f2-0310-859d-f6bbb57e9c96
ALPS movements are fine now, hope the synaptics is still working. Please test! There are still some leftovers form switching from a c struct to a c++
class will fix that later.
- Support ALPS devices with passthrough.
- ALPS is still disabled because tap and edge motion is not working yet. The
problem is that synaptics generates more helper events which makes this a lot
easier to implement. My plan is to emulate this events to imitate the synatics touchpad.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41140 a95241bf-73f2-0310-859d-f6bbb57e9c96
more or less a copy of the synaptics driver. Next step is to refactor the movement generation and share the
code with the synaptics driver.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ntfs log handler wasn't included for Haiku, it should be used to set up a log handler.
* style fix
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41081 a95241bf-73f2-0310-859d-f6bbb57e9c96
marked as read by another client the haiku client at least updates the flags and mark it as read when fetching the body. Thats the way Opera is
doing it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41018 a95241bf-73f2-0310-859d-f6bbb57e9c96
product id. Currently the list only has an example entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41017 a95241bf-73f2-0310-859d-f6bbb57e9c96
The complete window need some love so do not complain at this stage, feel free to fix it, though :-) (Main problem is to add a cancel button to abort the folder fetch and show an error message, see #7258).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40978 a95241bf-73f2-0310-859d-f6bbb57e9c96
there is no need to do the usage page and usage id handling anymore.
* As this also removes the only use of the global state it is removed as well.
* Try the usage maximum as a fallback as well and print something if none of the
usage sources are valid and the collection ends up without a proper usage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40954 a95241bf-73f2-0310-859d-f6bbb57e9c96
the conversion, it makes it easier to do it for all items the same. This fixes
the missing initialization of the usage stack as pointed out by caz_haiku in
#7354, thanks for the pointer!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40953 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move the main data declaration to where it's used.
* Tiny cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40952 a95241bf-73f2-0310-859d-f6bbb57e9c96
There is one thread (BLooper) to handle new commands and one watcher thread which is just listening at the server port for updates. The race condition occurred for example when a sync/watching and a fetch body message are send to the looper. The sync message just triggered the IDLE command in the watcher thread. In the meantime the fetch body command send a DONE command, because the IDLE command has not be send at this time the watcher keeps watching.
- fix int32 -> ssize_t thanks Axel and Stippi
- clean up
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40919 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
I remember there was a ticket about the localization problem in one of
this components. I'll look for it tomorrow and close them all. If I'll find them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40734 a95241bf-73f2-0310-859d-f6bbb57e9c96
the B_TRANSLATE_WITH_COMMENT macro are misinterpreted by our
localization routines. I fix this one, because it provocate
permanent fingerprint check failure during catkeys link procedure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40723 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual but only static methods, it is not so likely that binary compatibility issues may arrise
from using it in new apps. Adjusted all the Jamfiles that included the private libicon headers. Note
that it was never necessary to link against libicon.a, since it's part of libbe anyway. There was one
instance where that was done. Hopefully it does not break the build, but I did this change a while ago,
tested it and then the harddrive began failing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40679 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Set watching variable when leaving the watching method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40635 a95241bf-73f2-0310-859d-f6bbb57e9c96
iconsintently.
Respect the 80 columns limit, update copyright, used calloc instead of
malloc.
No functional changes (hopefully)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40597 a95241bf-73f2-0310-859d-f6bbb57e9c96
handling:
* package attributes are now compatible with the low level attribute
handling of other HPKG attributes (such that 'package dump' now shows
package attributes, too)
* dropped type names from hpkg format, the attributes were identified
by IDs already and this simplifies the code considerably. Type names
are now handled in BLowLevelPackageHandler only.
* instead of rolling their own mechanism, high-level package attributes
handling is now implemented via a corresonding set of
AttributeHandler-subclasses
* adjusted package writer to only write package attributes that are
needed (empty ones are left out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40466 a95241bf-73f2-0310-859d-f6bbb57e9c96
variables to make the function a bit clearer, hopefully.
* Fixed the wrong order of releasing the reference, and removing the object
from the hash table -- thanks Rene!
* Added a bit of documentation to InterfaceAddress::Prepare().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40455 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes random memory access on interface removal.
* Optimized IndexOfAddress() for NULL addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40447 a95241bf-73f2-0310-859d-f6bbb57e9c96
have duplicates there, it should certainly not panic.
* Do not add unspecified addresses to the hash table.
* The result of adding the initial address of an interface was ignored; now, the
interface is correctly destructed, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40444 a95241bf-73f2-0310-859d-f6bbb57e9c96
* clean up
* directories don't seem to have a valid contiguous flag, fixes directories with many files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40431 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fleshed out RepositoryWriterImpl
* renamed BRepositoryHeader to BRepositoryInfo (in accordance with
BPackageInfo)
* adjusted BRepositoryInfo to be able to parse itself from a
driver_settings file
* added package_repo binary (only 'create' works as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also the read flags are synced with the server. This makes it easy to have the same mailbox state on different machines.
Messages could be deleted by delete them form the folder (not when moving them to trash) This maybe needs some more thoughts but its a save solution. One problem with moving it to trash is that you also want to have the option to restore it again. If it is a header only messages and you delete it from the server you lose the body part. Complete messages could theoretically be append to the mailbox again when restoring the mail form trash. Append is commented out though...
An solution for the delete problem would be to move the message to a trash folder on the server. Moving mails on the server is not implemented yet, though.
You can subscribe or unsubscribe to a mailbox using the imap pref panel. The settings are written to the server and are not stored locally.
Add some helper classes which could also be used for POP and SMTP:
ServerConnection: abstract ssl or socket connection
ConnectionReader (still a bit IMAP specific but could be easily separated IMHO): read complete lines or a bunch of data more efficient. Old implementation did it byte by byte, this class read data in bunches and buffer the left over for the next request...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40399 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove button in the pref app removes the complete account because we don't have separate chains any more. The pref app stays a mess, needs some layout love! (I did it even look worse...)
The new account/mail settings classes know if they have been changed but the current pref panel does not use this feature very well. It always mark the settings as modified when the settings view is displayed or more precise when the settings view is detached from the pref window, this could be optimized. The according mail protocol is completely restarted when their settings changed.
Some system filters are now directly integrated in the mail protocols. Hopefully make things easier to understand.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40398 a95241bf-73f2-0310-859d-f6bbb57e9c96
#7135#7140#7141#7145#7186#7188#7191#7136#7187#7184#7185#7192#7138#7139
with some changes and exclusions:
- all attempts to localize "fprintf(stderr,..." and "printf(..."
replaced by _untranslated_ "syslog(LOG_ERR ...";
- following *Translator.rdef files, that were not added in mentioned patches
were additionally created:
SGI, TIFF, RAW, RTF, PPM, WebP, EXR, STXT, WonderBrush, GIF, TGA;
- some small fixes for consistent catalogs building.
Thank you, Jorma! Please check. ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40357 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added kernel-compatible datatypes for reading package info attribute
values (PackageInfoAttributeValue.h) - these will be used at a later
stage by the package-fs to transport those attributes to userland
when asked to do so (by ioctl)
* implemented parsing of package info attributes in PackageReaderImpl
* added support for compressed package attribute section to
PackageReaderImpl
* completed the writing of package info attributes in PackageWriterImpl
and fixed a couple of bugs exposed by parsing
* adjusted 'package list' to show the package info attributes as they
are found
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40354 a95241bf-73f2-0310-859d-f6bbb57e9c96
