only scsi_disk checks the actual value, other drivers take the logical block size.
This change reports the physical block size from the disk rather than the block
size used by IDE/SATA/SCSI commands. On typical modern SATA disks, the SATA
commands will use 512 byte blocks, but the disk will actually read and write
4K blocks internally. This is only of importance for partition alignment for DriveSetup,
and is independant of file systems or partitioning systems. This could also influence
the recommended block size for some file systems.
Change-Id: Id0f2e22659e89fcef64c1f8d04f81cd68995e01f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5667
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
fix f33f4868fe
*_np functions are in a not included header.
add weak aliases for the future functions without _np.
Change-Id: Ie2bcc9173a2b93a6c4052c039cb37930c1c3aaa1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5685
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This will give the same result as fs_stat_dev, so the filesystems will
have the same name everywhere.
Change-Id: Ic684142efaeb2c16b393f3f3e5c9c3010a054b30
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5636
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
The respective files can be found in the FreeBSD source tree at:
- lib/libstdthreads/call_once.c
- lib/libstdthreads/cnd.c
- lib/libstdthreads/mtx.c
- lib/libstdthreads/threads.h
- lib/libstdthreads/tss.c
Missing is support for PTHREAD_DESTRUCTOR_ITERATIONS.
Change-Id: I7a6c79954f36195eadd1351d308c21a001192232
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5675
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reported by zuMi, while contributing to the Italian translations. Thanks!
Change-Id: I15e8fc17390188c6d0051384d047ebe06d19a2bc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5677
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Use the EL0 Read-Only Software Thread ID Register aka TPIDRRO_EL0
to store TLS pointer.
The EL0 Read-Only Software Thread ID Register is read-only in User mode
and read/write in privileged modes.
Change-Id: Idea7e3d66cd391dbbe3f9395cb37716089a49e13
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5673
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: David Karoly <karolyd577@gmail.com>
When change 2966 was merged as hrev56269, it was decided to first introduce
this in libshared instead of libbe.so. The test was moved accordingly, but
not all the code in the unittests was properly updated. This change completes
it.
Note that the test currently crashes, so it needs more investigation whether
that is a test issue or a BMemoryRingIO issue. Fixing this is beyond the
scope of this change.
Change-Id: I0f61d1dd013da904b3e4545db11fefa9da2da0a2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5676
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Global variable gBootGDTDescriptor is used only in function arch_start_kernel()
so we can convert it to a local variable.
Change-Id: I8b6ad2c0903364bdcdcc1039aea6c9c09253fe09
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5663
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: David Karoly <karolyd577@gmail.com>
Global variable gBootGDT is used only in function arch_mmu_init_gdt()
so we can convert it to a local variable.
Change-Id: I06174dcd6df4b7bd5136a7e2fabafdc3273f03d3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5662
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
This avoids introducing an entirely custom hook in FUSE.
It uses the ioctl hook in an unconventional way (calling it with no
valid fuse_file_info) but this can be fixed if a filesystem requires it
(by opening a file handle on /, doing the ioctl, then closing again).
An updated version of fusesmb-haiku is available and confirmed working:
https://github.com/haikuarchives/fusesmb-haiku
Change-Id: If1268113874363fa035e5340be75e9f5198216d6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5199
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
these would otherwise trigger an assert when initializing.
fixes#6781
Change-Id: I4fa34455e7734f6a4039705527bf5ab09b46998d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5659
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
KPartitioningSystem::SetName() and KPartitioningSystem::SetType() are very similar.
SetName() already worked for GPT, and with this change SetType() now works for GPT too.
Change-Id: If1456a8f5e94ae2e2a05b75e3691f912bd1324ee
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5656
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Not referenced in any Jamfile, does not compile, untouched since
2003 except for a few coding style and cppcheck fixes. The functionality
is implemented elsewhere in the disk device manager and userland
filesystem add-ons for DriveSetup.
Change-Id: I5ebe125931c8d4410c2d335f9d6c0e32008f038b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5637
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Implemented all necessary hooks for extended attributes in kernel_interface.cpp
- Implemented an abstract class attribute which will act as an interface between all forms of extended attributes in xfs
- An attempt to read shortform extended attributes
Change-Id: Icff9329b790f9fcfc0b078f61059795af9d9e486
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5570
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
It seems some versions of Intel BIOS report the mode as invalid after
patching (probably there is not enough patching), but setting the mode
will actually work. So, if we detect no mode with our patches, and we
detect a broken mode, attempt to use that.
May fix#17929
Change-Id: Icb9259a79b5a49d18946b682af89dda16176e854
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5628
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
when no screen configuration is found, the preferred mode is then selected,
and we now use this as current screen configuration. Otherwise, the user
would adjust the brightness, but it would never be stored for the next boot.
Change-Id: Ia855f8a29eb5e429747f3e0bc89a46587fa42f59
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5624
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Change prints to be compatible with 2.x and 3.x.
* Use html.escape instead of cgi.escape on Python >= 3.8.
* Make integer division explicit.
Change-Id: Ib9b236816e8fa07741c02d0e79629c4aa0ed6676
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5603
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
There can apparently be interfaces without descriptors.
Should fix#17892
Change-Id: Ibcbab0f60ecbd2005640c647bf7540d17d0f5375
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5598
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
