* Since the last change, the user launch_daemon would talk to the
registrar again.
* However, this also caused BRoster::Launch() to preregister the app,
which messed up our preallocated port.
* BRoster::Private::Launch() now allows to get the port that the
registrar created in such a case, and the launch_daemon will now just
use that one as default port.
* This lets us talk to the Deskbar again, and should fix#12455, as
well as #12454 (again).
* When using a proxy, HTTPS connexion must still go directly to the
target website. The proxy can then act as a TCP stream relay and just
transmit the raw SSL stream between the client and website.
* For this, we ask the proxy sending an HTTP request with the CONNECT
method. If the proxy supports this, we can then send anything as the
payload and it will be forwarded.
* Untested, as the network here in Dusseldorf doesn't let me use a
proxy.
ticket : #10973
* BView::TranslateBy(), BView::ScaleBy() and BView::RotateBy()
allow to conveniently modify the current affine transformation.
This makes it unnecessary to first read the current transform,
modify it, and then set it again.
Uses the new Pre...() methods of BAffineTransform.
* Also, remove setting the transform "through" to the BView even
while recording a BPicture, as this now results in transforms
being applied more than once.
* The existing methods TranslateBy(), ScaleBy() and RotateBy()
transform the transformation. For a transform A, a point p,
and the temporary transform B (being applied by the methods),
this results in p' = B*(A*p) = (B*A)*p
This is not necessarily the desired result. Suppose A is a
translation and B a rotation, added by RotateBy(). Then B*A
means that the translation itself is rotated, so B moves the
coordinate origin itself, by rotating it around the original
origin of the coordinate system (top left view corner).
If we want to translate and then rotate around that *new* origin,
we need to multiply the transforms the other way around: A*B.
Three new methods PreTranslateBy(), PreScaleBy() and PreRotateBy()
implement this. They are later used as a base to add translatation/
scaling/rotation methods to BView which behave in the expected
ordering, similar to other graphic APIs.
* Add new clipping API for rectangles (ClipToRect, ClipToInverseRect)
and shapes (ClipToShape, ClipToInverseShape)
* Works with affine transforms and automatically switches from fast
region-based clipping to alpha-mask based clipping as necessary.
* Always self-intersecting, i.e. no state push required to further
narrow down the clipping region. All of the 4 new methods can be
mixed in any order.
* Add IsDilation() to BAffineTransform and Transformable which check
whether the transform is a dilation, i.e. consists of only
translation and/or scaling
Conflicts:
src/kits/interface/PicturePlayer.cpp
src/servers/app/ServerPicture.cpp
In addition, the following files were also adapted to master branch
BPicture changes during the merge:
src/kits/interface/PicturePlayer.h
src/servers/app/PictureBoundingBoxPlayer.cpp
* Added B_ prefix.
* Renamed 16 bit variants to B_LENDIAN16_*.
* Added 32 bit variants (albeit only 16 of them for now).
* Adjusted headers that were using them.
When an HTTPS request uses an SSL certificate that OpenSSL considers
untrusted, and the user decides to continue anyway, add the certificate
to an exception list. Match certificates against this list and don't ask
the user again if they are already there.
Fixes#12004. Thanks to markh for the initial patch and peeking into the
WebKit code!
Reduce duplication of code by
* Removing from elf_common.h definitions available in os/kernel/elf.h
* Deleting elf32.h and elf64.h
* Renaming elf_common.h to elf_private.h
* Updating source to build using public and private ELF header files
together
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
Make a version of elf.h (assembled from the private header files
elf_common.h, elf32.h and elf64.h, and including Haiku's extensions for
C++) available to applications ported from UNIX.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* Ie. a listing of all targets/jobs, as well as specific (basic) info
on each.
* Also added a bit of optional debug output.
* Moved translating the path to launch time -- we should take the job's
environment into account here at some point.
The use of an unreliable test for relocatability effectively broke
runtime_loader's support for non-position-independent executables, as it
would insist on randomly positioning these files' segments in memory
anyway causing the program to quickly crash.
With this change runtime_loader uses the object type specified in the
file's header to determine whether its segments can be safely relocated,
restoring support for non-PI executables.
Fixes#12427.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* Add -fgnu89-inline flag for libroot/posix/glibc
* Change __GNUC__ == 4 to __GNUC__ >= 4
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Fixes#11990, most of the changes had already been done.
* A dependent job was requeued even if it wasn't part of the queue
before. The code relied on dependent jobs being already enqueued;
but that cannot be guaranteed.
* If a job failed, its dependent jobs are now also set to failed, so
that they won't be requeued at a later point.
* This caused some of the "Launching xxx failed: Operation not allowed"
messages in the boot process. Those actually weren't harmless, and
could mess up the natural job order.
* Sticky events are events that keep their signal raised, ie. even if
a job is initialized afterwards, it will still be triggered.
* Consolidated naming for external events.
* Events are now registered once they are actually being used. This
allows them to allocate the resources they need to do their thing.
* No impact to non-ValleyView chipsets
* Bump some register locations for VLV
* Only have HDMI port to test with on my ValleyView GPU
and our driver seems to be missing all HDMI and
sideband functionality.
* As ValleyView chipsets seem to be UEFI only, we don't
have VESA fallback, so this shouldn't cause regressions.
(unless we get UEFI framebuffer support)
* Move to more standardized functions matching AHCI spec
* Don't perform unnecessary double port resets
* Begin implementing a software reset to try first per spec.
Software reset needs more work, falls through to port reset
for the moment which is stable.
* Don't duplicate ATA defines, use what we already provide.
* Tested working on VirtualBox 1-16 AHCI ports, Intel C200,
and AMD FCH.
* Each io_context now has a "inherit_fds" member that decides whether
or not this context allows to inherit FDs to its children.
* This replaces the former O_CLOEXEC mechanism.
* You can specify which borders will be drawn using the
BControlLook::B_TOP_BORDER, ... constants.
* Adapted Mail to no longer need the SetInsets() hack.
* Moved entirely into MainWindow.
* Moved duplicated code into separate methods.
* Resize the main window on larger screens by default, as we can make
use of the extra space.
* Use BWindow::MoveOnScreen() instead of make_sure_frame_is_on_screen()
as the former has more info. And is even smarter now as it can
optionally resize windows to fit on screen.
* Center window on screen by default (ie. when there are no settings).
This introduces a more sane API (currently private) that allows for
safer and possibly more efficient implementations:
* It uses a struct of named and typed function pointers instead of just
a void pointer array. This adds type safety to the callbacks so the
compiler can figure out if things match up before subtle bugs get
introduced.
* It provides bounds for all strings/buffers passed to the callbacks.
* It uses const references instead of implicitly copying arguments.
* It folds stroke_x/fill_x pairs into draw_x functions with a fill
argument to reduce the amount of functions needed.
* It uses unsigned values where negative values make no sense.
The old API has been implemented on top of the new one using adapter
functions. It makes copies of all data passed to the callbacks which
effectively keeps the picture data from being modified. This matches
with the R5 behaviour.
This also reimplements the buffer parsing to be safe against corrupted
data by validating that the types actually fit in the provided sizes
and buffers (using a templated reader).
Since this class is used from the app_server with user provided data,
making it more safe is important even though it comes with a slight
overhead (replicating R5 behaviour, i.e. crashing the app_server when
corrupted data is fed, doesn't seem very appropriate here).
* Added missing const to some getter methods.
* Date() now tries to parse the date of the mail, and return it as
a time_t; you can still retrieve the actual string via
HeaderField("Date") if you have to.
* Mail now shows the time in the local time zone, and with the
current locale.
* While this breaks binary compatibility with earlier Haiku releases,
use values that are less likely to clash with actual use cases.
* Specifically, using a negative spacing is one way to get rid of the
border of BScrollViews, to put them into a window neatly.
* Also, BControlLook now uses a switch to resolve them.
* This has been necessary due to the undefined call order of
of static objects. Fixes#12315.
* The bug has been caused by the linker which free unused resources,
making the BMediaRoster to run in a zombie state. In this state
anything such as a message could make the looper to crash.
* The class is reintroduced with some differences though, we are
going to protect it from another thread calling Roster() while the
BMediaRoster is quitting and implement BMediaRosterEx::Quit.
* Unregister registrar notifications before we quit our thread. Avoid
to uninitialize anything from QuitRequested as it may cause problems.
