in the free and/or clear queue. This performs better in the case where only few
pages are free/clear but performs worse in the case where there are a lot of
usable pages. It's not used anywhere but it might come in handy one time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33527 a95241bf-73f2-0310-859d-f6bbb57e9c96
PageWriteTransfer. This makes the transfer accept virtually contiguous pages,
where the offset is contiguous on either end of the current transfer, but where
the pages aren't physically contiguous. It will then add seperate iovecs for
these pages (32 at max right now). This reduces the number of IO requests
generated and allows for optimizations down the IO path (like in the physical to
virtual mapping case for example).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33526 a95241bf-73f2-0310-859d-f6bbb57e9c96
need for the IO -> InternalIO indirection as it is always fed virtual buffers,
which simplifies things a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33525 a95241bf-73f2-0310-859d-f6bbb57e9c96
is virtual already it just returns the vecs directly, if it is physical it takes
over the task of virtualizing the vecs either using vm_map_physical_memory_vecs,
if there are multiple vecs or more than one page, or falls back to page wise
mapping if mapping fails or is not needed. In the best case, scattered physical
pages are mapped into one linear virtual buffer so that subsystems operating on
virtual memory only get a single vector and can then burst read/write.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33524 a95241bf-73f2-0310-859d-f6bbb57e9c96
takes a list of iovecs describing the physical pages to be mapped. With it one
can map a set of physically disjoint pages into one linear virtual range. This
is a private API right now, but we might want to make it public as
map_physical_memory_vecs alongside map_physical_memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33523 a95241bf-73f2-0310-859d-f6bbb57e9c96
are required to be physically contiguos, which should be reworked to put them
into seperate iovecs. Still this manages to combine a great deal of page
writes into larger bursts already. Reduces the amount of IO requests being
scheduled (and greatly benefits media where page wise writes are slow when
they are accessed through a non-IOScheduler path, i.e. USB mass storage until
that is properly implemented).
* Abstracted per page page writing tasks into a PageWriteWrapper class.
* Abstracted per transfer page writing tasks into PageWriteTransfer class which
formerly was the PageWriterCallback.
* Use both classes from the PageWriterRun and from
vm_page_write_modified_page_range to remove code duplication.
* Adjusted synchronous VMAnonymousCache::Write() to cope correctly with larger
iovecs and more than one iovec. It assumed that there was exactly one page per
vector previously.
* Introduced MaxPagesPerWrite() and MaxPagesPerAsyncWrite() to VMCache to allow
a cache to specify restricitions. VMAnonymousCache does restrict the max pages
to 1 for WriteAsync right now as I didn't feel like reworking that one to cope
with non single page writes just yet.
* Pulled out PageWriteTransfer methods for better readability.
* Some typo fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33507 a95241bf-73f2-0310-859d-f6bbb57e9c96
reads or writes for old style drivers, map the physical memory at once. Since
USB is pretty much the only one affected and there small reads/writes are
exponentially slower, the performance gain of the burst transfer far outweighs
the additional overhead of the mapping. Still this could be further optimized
and will eventually be superseeded by also providing a physical memory API in
USB. For now it should bring back USB reads to an acceptable level. Writes are
still page wise though because of how writing back memory works in general.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33503 a95241bf-73f2-0310-859d-f6bbb57e9c96
always return the source string length, we can't really prevent an overflow
of the source address.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33489 a95241bf-73f2-0310-859d-f6bbb57e9c96
when scanning for drivers, as that reverts the standard locking order with
locks like the device manager lock. There is now a dedicated scan_lock for
each directory.
* get_device_name() now locks itself which also adds a missing lock in the
B_GET_PATH_FOR_DEVICE ioctl().
* Minor refactoring; the directory init code was duplicated over several places
in the source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33465 a95241bf-73f2-0310-859d-f6bbb57e9c96
address overflows. Apparently at least the x86 string instructions generate
a general protection fault instead of a page fault, and we only use the fault
handler in the latter case (maybe we should change that, too). Fixes#4714.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33436 a95241bf-73f2-0310-859d-f6bbb57e9c96
code is no longer loaded, e.g. when the module has been unloaded or the tracing
buffer was reattached from a previous session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new header headers/private/system/disk_device_types.h, which defines
the <DiskDeviceTypes.h> constants as macros and which can be used where the
constants cannot be used. The constants are defined using the macros, so now
there's only one place where the string literals should be specified.
* Use the macros in the partitioning systems. I was too lazy to also adjust the
file systems -- most of them seem to hard-code the string literal yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33386 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed vfs_get_vnode_from_fd() return type.
- Added vfs_open_vnode().
- Added a "bool traverseLeafLink" parameter to vfs_get_fs_node_from_path().
It was always resolving symlinks.
* device manager/devfs:
- devfs: get_node_for_path() no longer resolves leaf symlinks. That still
doesn't help with file disk devices, as creating partition wouldn't work
anyway.
- Pulled the module-related implementation part of BaseDevice into new class
AbstractModuleDevice and made all methods of BaseDevice virtual. Small
adjustments to devfs to be happy with the new BaseDevice interface.
- Added BaseDevice subclass FileDevice, which maps the interface to a file's
file descriptor. Still got a few TODOs, but should basically work.
- Use FileDevice for publishing file disk devices in devfs. Now those do
actually work, though there's some BFS trouble with one of the images I
tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33385 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove the 4 cores limit at boot, and fix the allocator to handle 8 cores.
There are still performance problems, but this allows booting with 8 cores.
WARNING: since this changes x86 platform kernel args, you really don't want to update haiku_loader and kernel_x86 separately!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33349 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't routed correctly over the 8259, it seems.
- Removed passing the hpet_regs around, since there's a static variable.
- Added lots of debug dprintfs.
- Fixed setting the timer interrupt to edge
- Timer is initialized once.
- Use the timer 0 instead of 2.
- Renamed register definitions to be more readable
- Use 64 bits registers and unions where applicable.
- Other things I don't remember
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also shortened some defines using "TN" instead of "TIMER". It's also
the same scheme used in the specs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33334 a95241bf-73f2-0310-859d-f6bbb57e9c96
Lowered its priority of hpet timer so it doesn't get picked up first
(yet)
Changed the debug output to be conditional.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33292 a95241bf-73f2-0310-859d-f6bbb57e9c96
factor to avoid compiler issues.
- Removed some useless and commented debug stuff.
- Now prints also the global HPET configuration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33291 a95241bf-73f2-0310-859d-f6bbb57e9c96
1000. XenServer boots correctly and in reasonable time,
now (meaning hpet timers work). I guess on real hw the bios doesn't
correctly program the hpet timers, so we'll need a bit more work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33289 a95241bf-73f2-0310-859d-f6bbb57e9c96
XenServer actually boots (but slow as hell) with hpet timers enabled, real hardware does
not.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33287 a95241bf-73f2-0310-859d-f6bbb57e9c96
if they were not already ordered. Or, to say id differently, it was completely
broken.
Luckily no one noticed....
Also disabled again printing the timers, since it could print not available ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33235 a95241bf-73f2-0310-859d-f6bbb57e9c96
checked the existence of the apics.
Moved the code to disable the local apic from arch_timer.c to arch_int.cpp, so
we also avoid installing the interrupt handler for it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33149 a95241bf-73f2-0310-859d-f6bbb57e9c96
Same for the IOAPIC, but commented out the code, since we're not using the
IOAPIC yet.
Also renamed the option to "Disable LOCAL APIC", since it's more correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33147 a95241bf-73f2-0310-859d-f6bbb57e9c96
can cause overflows.
* Added a generic IS_VALID_SPOT() macro that checks for overflows and checks if
the area will fit with the given constraints.
* Use the macro to simplify the places where these checks are necessary.
* Use the provided "end" limit instead of the address space end. It currently
doesn't matter but makes more sense.
* Rename newBase variables to alignedBase as that's what they are.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33061 a95241bf-73f2-0310-859d-f6bbb57e9c96
to insert areas so we don't overflow.
* Consequently use the area end (base + size - 1) where appropriate which
prevents overflows in a few places.
* Properly check for reaching the address space end.
* If we've already found a spot we don't need to recheck if we've found one.
* Simplify the B_EXACT_ADDRESS checks down to a simpler single if statement
instead of the four seperate ones.
* Properly calculate the search end for B_EXACT_ADDRESS as well, it's also
base + size - 1.
* Block the full last page now that this actually works without overflowing.
* Some style changes and added spacing.
This should now really fix#2550. Previously the overflow protection didn't
actually work because on allocation we overflowed and completely missed the
protecting area.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33037 a95241bf-73f2-0310-859d-f6bbb57e9c96
and 0xcccccccc (and 64 pages thereafter) in any way will always lead to a crash.
Before it could happen that these ranges were allocated for an area and then
accessing these would not be as evident anymore. Only enabled when the
corresponding paranoid setting is enabled (which it currently is).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33033 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the VM functions handling areas are overflow safe. If an area is created that
spans across the last page many places will run into an integer overflow. This
mostly concerns the area allocation path in find_and_insert_area_slot() and also
vm_create_anonymous_area() where the loop for mapping pages for B_FULL_LOCK
areas overflows and runs more times than it should leading to #2550.
This could be seen as a workaround. The real fix would be to make everything
overflow safe. The thing is that this does also concern the user of the area
which could easily have forgotten to check for overflows as well, so I am a bit
uneasy with handing out areas that could easily lead to such hard to debug
problems. Since this is really an edge case and this single step safes quite a
bit of extra checks I'd actually be OK with keeping it that way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33032 a95241bf-73f2-0310-859d-f6bbb57e9c96
mapped pages and a non-read and non-write protection to block a certain address
range from being used by anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33030 a95241bf-73f2-0310-859d-f6bbb57e9c96
its open_dir() implementation instead (as suggested by Ingo).
-alphabranch (it's only a cleanup)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33025 a95241bf-73f2-0310-859d-f6bbb57e9c96
a directory, we returned EINVAL instead, which caused Perl's internal
glob() implementation to fail prematurely
+alphabranch (will do that myself in a minute)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32999 a95241bf-73f2-0310-859d-f6bbb57e9c96
end up as 0 again in any case. It certainly looks correct without it, removing
so it doesn't confuse the next one reading over it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32994 a95241bf-73f2-0310-859d-f6bbb57e9c96
many pages as are actually missing, not the full count.
* Take into account that free_page_queue_count() can be less than sReservedPages
(when some of the reserved pages have been allocated already) in
vm_page_num_unused_pages(). Before it could return negative and therefore
wrapped numbers.
* Simplify the page scrubber loop by continuing early. Also avoids a needless
interrupt spin lock acquisition when there's nothing to do.
* Some minor coding style cleanup.
* Fix a typo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32980 a95241bf-73f2-0310-859d-f6bbb57e9c96
allows for BFS based LiveCDs. Still this whole name matching feels hacky.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32976 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows for synchronous uses where subrequests are forked off and waited on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32936 a95241bf-73f2-0310-859d-f6bbb57e9c96
only some sub requests worked. Previously we would have simply canceled all
of the subrequests in the loop because we cancel after the first error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32914 a95241bf-73f2-0310-859d-f6bbb57e9c96
* An off by one error prevented the very last block of a device to be accessed
through IO.
* In case of error the request wasn't notified causing anyone (the page writer
for example) to wait forever for the request to complete.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32913 a95241bf-73f2-0310-859d-f6bbb57e9c96
capabilities to aid in debugging memory corruption issues.
It does:
* Initialize memory to 0xcc to help turn up use of uninitialized memory
* Set freed memory to 0xdeadbeef to help find accesses of freed memory
* Use the paranoid heap validation to turn up many cases of memory corruption
* Use a simplistic wall check to turn up memory overwrites past allocations
* Take extra steps to validate freed addresses to turn up misaligned frees
It has an interface to en-/disable paranoid validation and to start/stop regular
wall checking. Both are currently just enabled. At a later stage a debug version
of libroot could be used by an application and the checks enabled at will. Note
that due to the paranoid validation and the suboptimal locking this allocator
will perform horribly. Still to find memory corruption issues in the system or
also in your applications it can be helpful to build your installation with it
turned on. To enable it you currently need to edit the Jamfile to sub-include
the malloc_debug instead of the malloc directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32894 a95241bf-73f2-0310-859d-f6bbb57e9c96
for the page list but not the area one. Since multiple pages can be allocated
at once, even an area that is not at the top of the list can become empty. In
such a case the area list would previously have lost entries. Also because
we can remove more than one page from any area, not just the top one, we may
need to move forward in the list so that it stays ordered by free pages.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32880 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of <dirent_private.h> -- the __DIR structure is private to dirent.c,
now. The attribute directory, index directory, and query functions use the
the public POSIX API, so does the kernel module code. Those components were
not initializing the structure correctly anymore since the introduction of
telldir()/seekdir().
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32819 a95241bf-73f2-0310-859d-f6bbb57e9c96
to " &" as really the whole rest of the file uses that style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32813 a95241bf-73f2-0310-859d-f6bbb57e9c96
switch /boot to a different volume in two operations, unless you have first
linked /system/lib into /bin. This patch assumes that / will always have the
ID 1. Don't know if that is proper. Note that I also thought about solving
this in the VFS, since perhaps it isn't the job of root-fs to know about
/boot, but that would of course introduce another check for every rename
operation, which I decided against.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32806 a95241bf-73f2-0310-859d-f6bbb57e9c96
Seems like we didn't remember to change it back, even
with the #warning. :-)
I tested ftp and it works fine. This also closes ticket #4176.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32766 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved device_manager/settings.cpp to debug/safemode_settings.cpp.
* Removed the somewhat hacky concatenation of kernel settings and safemode
settings in the boot loader. Instead, get_safemode_option() will now fall
back to the kernel settings, if it couldn't spot a setting in the safemode
settings. This allows for more control, and also makes enabling serial
debug output actually work (ie. overriding the kernel settings via safemode
options).
* Adjusted debug_init_post_vm(), and smp_init_other_cpus() to use
get_safemode_boolean().
* Therefore, I added safemode_settings.cpp to the boot loader as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32685 a95241bf-73f2-0310-859d-f6bbb57e9c96
So either +alphabranch or remove the declarations from <dirent.h>.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32679 a95241bf-73f2-0310-859d-f6bbb57e9c96
into the scope of the lock. Saves an InterruptsSpinLocker.
* Use an InterruptsSpinLocker() as in other places.
* When creating/forking a team fails because the kernel thread cannot be spawned
balance the already sent TEAM_ADDED notification by sending a TEAM_REMOVED one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32595 a95241bf-73f2-0310-859d-f6bbb57e9c96
been removed. That includes CPU disabling and thread pinning, as that becomes
pointless with only one CPU.
* Return a proper reschedule hint on enqueing a thread, based on the priority
of the current thread vs. the enqueued one.
* Enable dynamic scheduler selection. With one CPU the simple scheduler will
be used, otherwise affine is selected.
* Removed the scheduler type define as we now always auto-select it.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32573 a95241bf-73f2-0310-859d-f6bbb57e9c96
* scheduler_enqueue_in_runqueue() now allows the scheduler to return a hint as to whether a reschedule is desirable or not. This is used in a few other places in order to relegate scheduling decisions entirely to the scheduler rather than the priority hacks previously used. There are probably other places in the kernel that could now make use of that information to more intelligently call reschedule() though.
* Switch over the default scheduler to scheduler_affine().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32554 a95241bf-73f2-0310-859d-f6bbb57e9c96
you can easily produce a dead lock. This should fix the system hang
experienced as part of bug #4223.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32526 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Keep track of the currently running threads.
* Make use of that info to decide if a thread that becomes ready should preempt
the running thread.
* If we should preempt we send the target CPU a reschedule message.
* This preemption strategy makes keeping track of idle CPUs by means of a bitmap
superflous and it is therefore removed.
* Right now only other CPUs are preempted though, not the current one.
* Add missing initialization of the quantum tracking code.
* Do not extend the quantum of the idle thread based quantum tracking as we want
it to not run longer than necessary. Once the preemption works completely
adding a quantum timer for the idle thread will become unnecessary though.
* Fix thread stealing code, it did missed the last thread in the run queue.
* When stealing, try to steal the highest priority thread that is currently
waiting by taking priorities into account when finding the target run queue.
* Simplify stealing code a bit as well.
* Minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32503 a95241bf-73f2-0310-859d-f6bbb57e9c96
re-insert it at a new place, but by only setting the priority and not the
next_priority field, the thread would actually be enqueued at the same priority
level as before. Didn't cause any real damage, guess it was just an oversight.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32494 a95241bf-73f2-0310-859d-f6bbb57e9c96
not hold the bin lock while setting and only protect the actual freeing. May
reduce bin lock contention a little bit.
* Tiny optimization for force-clearing 0xdeadbeef. Do it after setting to 0xcc,
so that it's less likely we have to do it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32473 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Always select POLLNVAL. We wouldn't get notified, if the FD was closed while
waiting.
* Skip negative FDs (as per POSIX standard).
* When encountering an invalid FD, we must not wait. Previously we did that as
long as any FD was valid.
* The return count must consider all FDs with non-null revents, including
invalid ones (revents is POLLNVAL then).
common_poll()/common_wait_for_objects():
* Don't bail out early, when no FDs/objects have been selected. We always want
to wait.
_user_poll()/_user_wait_for_objects():
* Copy the array back to userland even if common_*() returned an error. The
functions do now always fill in the resulting events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32418 a95241bf-73f2-0310-859d-f6bbb57e9c96
* B_EVENT_INVALID is no longer passed to the FD's select()/deselect() hooks.
* Now we always attach the select info to the I/O context, even if no event has
been selected. The reasoning is that B_EVENT_INVALID is always automatically
selected and handled by the VFS, so we need the handle to notify on close().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32417 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- implement atomic_set() for PXA and other pre-arm6.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32413 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add assembler code to actually jump to the kernel.
The terminal now says:
kernel entry at 80048228
PANIC: acquire_spinlock: attempt to acquire lock 0x8012a59c with interrupts enabled
Welcome to Kernel Debugging Land...
Thread 0 "" running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32408 a95241bf-73f2-0310-859d-f6bbb57e9c96
Turn off interrupts at loader entryn and make sure the mmu is disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32405 a95241bf-73f2-0310-859d-f6bbb57e9c96
This seems to work around the dynamic segment having a huge file size in headers, it must also be in the data segment...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32404 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add support for boot splash, only for PXA.
Disabled for now as it forces the framebuffer onto some useful data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32399 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of using the user buffer. This frees the VFS and FS implementations
from handling user buffers.
* Adjusted fix_dirent() accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32384 a95241bf-73f2-0310-859d-f6bbb57e9c96
Start of framebuffer initialization for the Verdex board.
For now it points to the data section as framebuffer for testing and shows an RGB pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32352 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vesa driver no longer uses VGA programming if the chip does not support
VGA compatibility.
* The VESA driver now tries to set the DAC to 8 bits per color gun.
* In VESA modes, the driver no longer tries to use VGA programming; introduced
the new vesa_set_indexed_colors() that is now used for palette programming.
This should fix wrong colors of 8 bit BWindowScreen users with VESA on real
hardware (emulators usually didn't mind either way).
* Note that the app_server needs to maintain a palette per 8 bit screen, as
right now, the colors are garbled after a workspace switch. Stefano, are you
looking into that already?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32347 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't forget the ELF header else we end up loading at 0x7fff8000...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32341 a95241bf-73f2-0310-859d-f6bbb57e9c96
Use the same trick as for m68k (r26536) to get separate text & data segments for the kernel, though this should really not be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32340 a95241bf-73f2-0310-859d-f6bbb57e9c96
Update the memory map to account for passed tgz mapping. It's still hardcoded for now though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32339 a95241bf-73f2-0310-859d-f6bbb57e9c96
Actually enable mmu_init() since it works for verdex now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32338 a95241bf-73f2-0310-859d-f6bbb57e9c96
move checking for the tgz after debug init, and print something when found.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32337 a95241bf-73f2-0310-859d-f6bbb57e9c96
Partial implementation of mmu support for the bootloader, with lot of debugging output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32330 a95241bf-73f2-0310-859d-f6bbb57e9c96
- empty u-boot specific platform code for the kernel,
- add various objects needed by the kernel from libroot or the generic C implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32328 a95241bf-73f2-0310-859d-f6bbb57e9c96
- stubbed out many arch kernel functions (borrowed from other archs),
- partially implement ELF relocations code, enough to load the kernel,
- move uart.c to kernel sources and use the same one for the loader,
- default implementation for gensyscalls,
- assembler code functions for interrupt masking (enable/disable/restore/query).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32327 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add unwind symbols to the kernel too... not sure it goes here though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32325 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stubbed out config_manager and pci bus_manager arch code.
Now really use the boot floppy tgz for the netbsd uimage as it all builds, but with other kernel arch code not yet commited.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32324 a95241bf-73f2-0310-859d-f6bbb57e9c96
Move the unwind data out of the bss section, it broke bss init which ended up erasing real data and making dprintf do weird things...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32308 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- moved the startup asm code to u-boot/arch/arm/shell.S
- added netbsd loader entry point,
- store the invocation type (0: standalone, 1: netbsd),
- store the global data in a variable,
- added some debug code to see what U-Boot gives us.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32291 a95241bf-73f2-0310-859d-f6bbb57e9c96
Missed this one in previous commit: remove board.ld include as we now give LD the address directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32285 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
Condition the exclusive ops to >= armv6 instead of specific version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32277 a95241bf-73f2-0310-859d-f6bbb57e9c96
case was an unterminated string, though).
* fix_dirent() did not copy the trailing null-byte.
* Not yet entirely sure why, but this caused #4214.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32254 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stub out swap funcs for pre armv6 which lack REV/REV16. WRITEME.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32240 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporary (?) solution to linking the loader: generate symbols needed by the unwinding code, which should actually not be used since we disable exceptions...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32239 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote PartitionMapWriter
* Updated style to match current style guide for the intel partitioning system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32235 a95241bf-73f2-0310-859d-f6bbb57e9c96
until the data it protects isn't in active use anymore. Previously it would
release the translation map and therefore the page directory reference while
the page dir was still set on the CPU, as only the actual call to
i386_context_switch() will replace the page directory in the control register.
This didn't cause any harm though, as during the context switch interrupts are
disabled and therefore the page directory would only be deferred_delete()ed and
not directly freed/overwritten. Still this is logically more correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32216 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add rule to handle uimage, and board-specific stuff to handle load addresses. Need to fix them, u-boot doesn't like loading the file with the header where the header says it should go, must copy to a different address.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32214 a95241bf-73f2-0310-859d-f6bbb57e9c96
Include board-specific file from the u-boot ldscript, to allow linking to different load addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32207 a95241bf-73f2-0310-859d-f6bbb57e9c96
Move uart.c to arch/arm/ where it belongs, it has nothing u-boot specific.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32203 a95241bf-73f2-0310-859d-f6bbb57e9c96
- cleanup,
- add an uart_debug_port() to avoid using the #define in serial.cpp,
- use board_config defines in uart.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32201 a95241bf-73f2-0310-859d-f6bbb57e9c96
more robust against broken (userland) file systems.
* 80 character column cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32184 a95241bf-73f2-0310-859d-f6bbb57e9c96
a good idea; it didn't have any consequences in there, but actually broke
the app_server's support for the VGA mode.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32181 a95241bf-73f2-0310-859d-f6bbb57e9c96
time. But since this is also locked from within the driver/directory watcher
(with the node monitor lock held), and handle_driver_events() could cause
node monitoring updates, the locking order could be reverted, causing a
deadlock (I just ran into).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32152 a95241bf-73f2-0310-859d-f6bbb57e9c96
be broken in the app_server now, but I haven't checked yet.
* Fixed typo in vesa.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32141 a95241bf-73f2-0310-859d-f6bbb57e9c96
accessible to the userland - this fixes#2405 (ie. MediaPlayer overlay now
works).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32135 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts when invoking it. The user TLB invalidation function essentially only
reads and writes back control register 3 (cr3) which holds the physical address
of the current page directory. Still a preemption between the read and the write
can cause problems when the last thread of a team dies and therefore the team
is deleted. The context switch on preemption would decrement the refcount of the
object that holds the page directory. Then the team address space is deleted
causing the context switch returning to that thread to not re-acquire a
reference to the object. At that point the page directory as set in cr3 is the
one of the previously run thread (which is fine, as all share the kernel space
mappings we need). Now when the preempted thread continues though, it would
overwrite cr3 with the physical page directory address from before the context
switch still stored in eax, therefore setting the page directory to the one of
the dying thread that now doesn't have the corresponding reference. Further
progressing the thread would release the last reference causing the deletion
of the object and freeing of the, now active again, page directory. The memory
getting overwritten (by deadbeef) now completely corrupts the page directory
causing basically any memory access to fault, in the end resulting in a
triplefault. This should fix bug #3399.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32118 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk device to the locking functions, not only the ID of the disk device
itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32094 a95241bf-73f2-0310-859d-f6bbb57e9c96
- added some multiboot support code:
- dump some of the passed info,
- parse command line (skip the 'kernel' name and pass the rest to stage2_args.arguments),
- added an add_stage2_driver_settings() function which takes stage2_args.arguments and translates it into safe mode driver settings, a bit dumb for now.
This allows using qemu -kernel haiku_loader -append 'debug_screen true' and get debug output without having to enter the menu (once multiboot info is used to determine the boot device too).
The idea is to allow passing driver settings and using them to pass extra stuff (like 'force_keymap fr' and other stuff for demo), and to help automate tests ('run_test /bin/sometest').
This should answer Axel's question :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32076 a95241bf-73f2-0310-859d-f6bbb57e9c96
