upper layers: you use the store_header() function to mark the header you want
to preserve. All subsequent remove_header() calls won't claim the actual
data, but only move the node start around.
* This header can then be restored by restore_header(). However, a call to
prepend_data() will destroy the stored header. Also, if remove_header() cuts
off a whole node, restoring the header won't succeed anymore.
* Discarded the no longer needed net_buffer::network_header field.
* Also discarded the hoplimit field which temporarily breaks the IPv6 build
until Atis reworks it.
* IPv4 now also dumps the IP header in the send path if debug output is enabled.
* icmp_error_reply() might be called so early that the net_buffer's addresses
do not point to the reply address; this is now detected, and the addresses are
taken out of the IP header in that case.
* Improved dumping the net_buffer to also include its address, and flags.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37688 a95241bf-73f2-0310-859d-f6bbb57e9c96
unreached ICMP messages now, and at least signal an error to select() (there
is no mechanism yet to actually forward the error to userland).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37651 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Therefore, IPv4 no longer needs to mess with that (incorrectly, anyway).
* Removed unused include, turned off ICMP debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37650 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of always returning B_OK.
* deliver_multicast() now takes the protocol restriction of a raw socket into
account.
* raw_receive_data() now correctly returns whether a buffer was delivered (due
to the protocol restriction, this wasn't the case before).
* ipv4_receive_data() leaked all multicast buffers.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37648 a95241bf-73f2-0310-859d-f6bbb57e9c96
2007), and Yin Qiu (GSoC 2008). And even though I needed to rewrite pretty
much all of it because of the countless bugs and problems it had, it still
shares the same architectural problems of introducing a domain dependent
error mechanism to the upper layers, and needing the
net_buffer::network_header hack. This I will rework later.
* net_buffer's append_size(), and prepend_size() will now gracefully handle
buffers without a data node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* MacDecorator : use _InvalidateFootprint and implement _MoveBy. This makes the MacDecorator work fine again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37615 a95241bf-73f2-0310-859d-f6bbb57e9c96
directly here), I made only a few style changes:
* introduced 'has_broadcast_address' field in
struct net_address_module_info
- REVIEW: the name, and the status of this field for UNIX and L2CAP
families
* ipv6 address family support
* ipv6 address printing
* ipv6 protocol support
* ipv6 multicast support
- TODO: add and remove multicast routes in a more proper way
- TODO: support MLD
* ipv6 datalink protocol support
* icmpv6 protocol support (EchoRequest and EchoResponse messages)
* ipv6 neigbor discovery protocol support
(Advertisement and Solicitation messages)
- TODO: only the very basic support is present,
the protocol state machine is by no means completed
- TODO: replying to Solicitation does not work too good ATM
(visible, when pinging Haiku from outside)
* added Jenkin's hash algorith
* minor changes in existing IPv4 code - cleanup function
ipv4_get_loopback_address(), written by myself
* add tests: raw, udp, tcp/udp, mullicast sender
* add 'hoplimit' field in struct net_buffer
- TODO: this is just a hack, more generic approach would be better.
* add 'receive_data' function pointer in
struct net_datalink_protocol_module_info
- TODO: this is also more like a hack, to support information
passing from ICMPv6 to IPv6_datagram level.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37604 a95241bf-73f2-0310-859d-f6bbb57e9c96
hopefully :-)).
* Improved interface change notification to include the flags that changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37594 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_BUFFER_OVERFLOW. It will have returned valid vectors in this case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37572 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've removed it for now, until someone finds the time to look into it.
* Therefore, enabled all supported devices for the rtl81xx driver.
* Made the rtl81xx driver actually work by adding the missing PHYs - it doesn't
use the same PHYs as the rtl8139 driver. Imported the rgephy.c|h from FreeBSD
8 (not yet in vendor branch, but unchanged).
* It seems to work reliably with Gigabit now, albeit a bit slow, and with too
high CPU load.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37425 a95241bf-73f2-0310-859d-f6bbb57e9c96
Will need a different fix to get device to work, but at least Haiku won't crash on bootup with this change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37409 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers. GCC 2 has the unpleasant habit of actually linking the unused inline
functions in. That doesn't suffice to build the userlandfs server with debug
info (it would be the wrong file anyway), but allows to build checksumfs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37405 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the old one from the locale librairy, with some cleanup
Known regressions :
* readonlybootprompt will no longer update the locale settings : the
method used messed with internal undocumented things
* external localized apps (webpositive for example) will not run
anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37336 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers and respectively added includes in source files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37259 a95241bf-73f2-0310-859d-f6bbb57e9c96
Supports Banshee, Voodoo3 and Voodoo5 chips.
It will be promoted as older tdfx replacement soon, but not until
my small changes around phys_addr_t are validated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37241 a95241bf-73f2-0310-859d-f6bbb57e9c96
but whether the respective controller does is indicated by a capability flag,
which we can't easily access at this point.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37228 a95241bf-73f2-0310-859d-f6bbb57e9c96
the constraint can be expressed more precisely. ATM B_32_BIT_FULL_LOCK is
implemented as B_32_BIT_CONTIGUOUS when B_HAIKU_PHYSICAL_BITS > 32, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37226 a95241bf-73f2-0310-859d-f6bbb57e9c96
has implicit limitations (probably because the devices/controllers/... do).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37213 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use create_area_etc() instead of create_area() so we don't have to deal
with the physical address restrictions by hand.
* Force physical addresses < 4 GB for the time being.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37209 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use create_area_etc() instead of create_area(), so the alignment doesn't
need to be ensured by hand.
* Use B_32_BIT_MEMORY for the time being.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37207 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use the respective error types for OS and ACPICA functions.
* Don't lock the memory. The caller must do that, since there's no balancing
function that would unlock the memory again.
* Get the memory map of the given function, not of the on-stack variable.
* Added 64 bit support and a check for the PAE case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37202 a95241bf-73f2-0310-859d-f6bbb57e9c96
help the stack to detect and handle hotplug device removal.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37144 a95241bf-73f2-0310-859d-f6bbb57e9c96
Applied patch for #5209 by oruizdorantes for usb_asix, do the same for usb_davicom.
Will eventually rework it in order to remove duplicated IDs list.
The usb_serial driver also needs the same optimization,
but gathering the IDs list will take more time than refactor the code and since
usb_serial is not yet included in haiku image neither ready (no tty module), there is less user experience immediate gain...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37135 a95241bf-73f2-0310-859d-f6bbb57e9c96
restrictions for virtual/physical addresses.
* vm_page_allocate_page_run():
- Fixed conversion of base/limit to array indexes. sPhysicalPageOffset was not
taken into account.
- Takes a physical_address_restrictions instead of base/limit and also
supports alignment and boundary restrictions, now.
* map_backing_store(), VM[User,Kernel]AddressSpace::InsertArea()/
ReserveAddressRange() take a virtual_address_restrictions parameter, now. They
also support an alignment independent from the range size.
* create_area_etc(), vm_create_anonymous_area(): Take
{virtual,physical}_address_restrictions parameters, now.
* Removed no longer needed B_PHYSICAL_BASE_ADDRESS.
* DMAResources:
- Fixed potential overflows of uint32 when initializing from device node
attributes.
- Fixed bounce buffer creation TODOs: By using create_area_etc() with the
new restrictions parameters we can directly support physical high address,
boundary, and alignment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37131 a95241bf-73f2-0310-859d-f6bbb57e9c96
patch by Ziusudra.
* Use new(std::nothrow) instead of new.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* try to launch screen_blanker by path when a launch by signature fails.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37120 a95241bf-73f2-0310-859d-f6bbb57e9c96
* try at support realtek alc888. alsa uses this init sequence.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37113 a95241bf-73f2-0310-859d-f6bbb57e9c96
I'd like to know if keeping re_defrag is required. Tests welcome (see #5180).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37041 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added quirks for idt 0x76b2 and apple macbook 0x00a1
* add headphones to the output path in case one input has a path to a used output
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37012 a95241bf-73f2-0310-859d-f6bbb57e9c96
warnings, but also some oversights from earlier changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37000 a95241bf-73f2-0310-859d-f6bbb57e9c96
that are wide enough for both virtual and physical addresses.
* DMABuffer, IORequest, IOScheduler,... and code using them: Use
generic_io_vec and generic_{addr,size}_t where necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36997 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Select() didn't actually reselect even when asked to force things from AddMessage(), making the uploaded mail get an off-by-one unique id assigned and a second copy downloaded on subsequent fetching, though this would really need proofreading as I'm not really sure how it all works,
- the allocated buffer wasn't freed, making mail_daemon allocate 650MB, which obviously crashed when out of physical ram, now it only uses 15MB :p,
- try to find workable IMAP flags for sent and pending mails, or use custom ones when the server allows arbitrary flags,
- the LIST command wasn't checked for correct response, making subsequent commands like CREATE mailbox fail from the OK answer of previous ones when syncing on a new accound,
- try to read the creating time (actually modification time since creation time is reset when copying files around) and pass it to APPEND command so I won't get the whole 10000 mails all received as of today.
Now I can put all my old mails on an imap server (tested on dovecot) to read it from other OSes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36995 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debug output to test_capacity().
* Minor other cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36990 a95241bf-73f2-0310-859d-f6bbb57e9c96
capacity by trying to read at the end of the medium.
* Not tested at all yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36989 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Internally, moved the contents of periph_io() into a static read_write()
function, and use it from the new periph_read_write() as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36988 a95241bf-73f2-0310-859d-f6bbb57e9c96
of having the logic be triggered by IOScheduler::SetDeviceCapacity(), as that
one might actually be called more often (for each call to update_capacity(),
ie. each B_GET_GEOMETRY/B_GET_DEVICE_SIZE will trigger it), and there is no
reason to throw away the cache every time (will make a difference during
partition/file system detection).
* In cd_init_device() just call update_capacity() instead of duplicating its
code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36986 a95241bf-73f2-0310-859d-f6bbb57e9c96
map_physical_memory()'s physicalAddress parameter type from void* to
phys_addr_t. This breaks source compatibility, but -- as long as
phys_{addr,size}_t remain 32 bit wide -- keeps binary compatibility with
BeOS.
* Adjusted all code using the affected interfaces (Oh what fun!). Added a few
TODOs in places where the wrong types (e.g. void* for physical addresses
are used). Looks like quite a few drivers aren't 64 bit safe and others
will break with PAE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36960 a95241bf-73f2-0310-859d-f6bbb57e9c96
was detected; however, it should only do so when there is an actual LVDS panel
detected.
* This should fix one part of ticket #3149 - looks like there are two different
issues. Thanks to Robert J. Gebis for providing me remote access to his
system.
* Minor debug output improvements.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36941 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed one instance where ACPI and BeOS status codes was not handled right.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36897 a95241bf-73f2-0310-859d-f6bbb57e9c96
prices.rtf to be parsed correctly as reported by humdinger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36884 a95241bf-73f2-0310-859d-f6bbb57e9c96
to stdout (mostly for testing).
* Removed no longer needed packaging jam rule.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36883 a95241bf-73f2-0310-859d-f6bbb57e9c96
invocation and fixes the dependency problem (missing grist on the sources)
that caused the headers not to be regenerated when the sources changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36878 a95241bf-73f2-0310-859d-f6bbb57e9c96
streams in AVI files. Could confirm this with a test video. Thanks and sorry
for the delay!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36847 a95241bf-73f2-0310-859d-f6bbb57e9c96
packet did not specify a PTS. Made this change long ago, I don't believe it
helped much...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36846 a95241bf-73f2-0310-859d-f6bbb57e9c96
Linux driver does, thanks for idefix for tracking down the problem! Should fix
ticket #5960, but I don't personally have the hardware. The change can only
affect Intuos3 tablets, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36791 a95241bf-73f2-0310-859d-f6bbb57e9c96
but this one should go into alpha2 to make the card work as before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36746 a95241bf-73f2-0310-859d-f6bbb57e9c96
it makes use of gPCI which is initialized during pci module init. Might help
with #5936.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36745 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes booting on the Samsung NP-N135, which used to reset before being able to enter the bootloader menu. It would be interesting if tickets #4408, #5539, #5696, and #5720 could be retested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36734 a95241bf-73f2-0310-859d-f6bbb57e9c96
now make sure no one else touched it in the mean time (in order to retrieve
consistent data for the index update). This should fix bug #5878.
* Squashed a TODO by locking the inode in the transaction as well.
* Fixed a quasi bug that would not have read the attribute data if there was no
live query for it; "fortunately", Volume::CheckForLiveQuery() is not
implemented yet, and always returns true.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36707 a95241bf-73f2-0310-859d-f6bbb57e9c96
To note, I'm grepping for "TR_CONTEXT" to identify which files to update.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36660 a95241bf-73f2-0310-859d-f6bbb57e9c96
(scsi_start_mode_sense_6(), scsi_start_mode_select_6()) also call
replace_request_data(), which does the same. Therefore the original request
data were lost. scsi_start_mode_select_6() also copied the wrong data due
to this.
* scsi_finish_mode_sense_10_6(): In case of error also call
restore_request_data() to restore the request data.
Fixes#5855 -- since the request data length was changed, unlock_memory() was
called with a different length than lock_memory(), thus triggering the
panic(). After starting CDPlayer the syslog is still spammed with failing
requests, so obviously something is still not OK.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36539 a95241bf-73f2-0310-859d-f6bbb57e9c96
supporting ID array (just that it only contains one entry).
* Fixed missing malloc() result check in embedded_controller_init_driver().
* Style fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36529 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It confused ms and usecs for ec_timeout
* It tried to handle waiting like on platforms that can't do better timing than ms. Haiku can do much better, which simplifies the code a lot.
This should fix#4623 and #5825. At least on my laptop BatteryStatus never shows weirdness or reports errors in syslog.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36511 a95241bf-73f2-0310-859d-f6bbb57e9c96
layout management. Fixed a bug in the HVIFTranslator which did not release
the TranslatorSettings in it's destructor. Thanks a bunch!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36501 a95241bf-73f2-0310-859d-f6bbb57e9c96
BaseTranslator framework and layout management. Big coding style clean up, too.
Thanks a bunch, great work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36466 a95241bf-73f2-0310-859d-f6bbb57e9c96
same BaseTranslator framework as many other translators are already using and
converting it to using layout management for the interface. Great work! Thanks
a lot!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36465 a95241bf-73f2-0310-859d-f6bbb57e9c96
USE_IO_CACHE macro in the header). Currently disabled, though. It works fine,
if the machine has a good deal of RAM. I tested with the anyboot CD -- the
boot and installation times drop dramatically. On machines with little RAM
there are issues, though. Apparently the cache isn't drained fast enough, so
that other allocations can fail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36438 a95241bf-73f2-0310-859d-f6bbb57e9c96
