* Revised the RLE algorithm used for compressing the boot splash artwork to
handle uncompressed runs.
* Compress the RGB channels separately for improved efficiency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24844 a95241bf-73f2-0310-859d-f6bbb57e9c96
usb_interface_descriptor of an alternate interface without having to switch
to it.
* Add some reserve bytes to all classes and add some reserved virtual slots
where the objects are publically constructable.
* Remove the source compatibilty defines that were briding the old USB* with
the new BUSB* class names.
* Implement the usb_raw side of getting an alternate interface descriptor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24842 a95241bf-73f2-0310-859d-f6bbb57e9c96
my brain, while the left side is still puzzled. So it's hard to put it into
words. Basically, there was an unwanted feedback loop when applications first
scrolled vertically and then horizontally (or vice versa). Because of the
feedback effects between BView and controlling BScrollBar, and because BView
controlls both scrollbars at once, it is important not to set the scrolling
offset of an unaffected ScrollBar, since we might actually be comming from the
SetValue() function of the other scrollbar. Fixes#1913 and possibly more,
going to check up on the other scrolling related bugs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24841 a95241bf-73f2-0310-859d-f6bbb57e9c96
that it has when you never set it, uses the large step to figure out the
proportion it should display. This fixes Pe's scroll bars to display the
"correct" proportion. Of course the proportion is only correct if the large
step indeed equals the page size. Fixes#1758.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24838 a95241bf-73f2-0310-859d-f6bbb57e9c96
on a patch by Salvatore Benedetto, adapted to the usb_raw interface by me
* Added two convenience functions IsStalled() and ClearStall() to USBEndpoint
Both changes are actually untested, so if you have a use for them and encounter
problems please shout.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24837 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed line breaks to not exceed 80 char limit.
* Removed any trailing spaces.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the pipefs functionality. We only need to support FIFO nodes.
* Renamed the remaining pipefs_*() functions to fifo_*().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24834 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It's not a good idea to archive fProportion as int32, seeing it's a float
on [0..1].
* Implemented archive constructor for BScrollBar. Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24832 a95241bf-73f2-0310-859d-f6bbb57e9c96
clearity as suggested by Philippe Houdoin once and brought to my attention by
Slavatore. As this definition is completely private to the USB stack it would
not have caused any conflicts though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24828 a95241bf-73f2-0310-859d-f6bbb57e9c96
also free the device info which it must not do, as this info is in fact just
a pointer to the device info of the raw node. Removing a raw device that had
partitions published therefore always lead into KDL when closing the raw
device after unpublising the partition, as the close_hook pointer which sits
in the device info now was 0xdeadbeef. This should make for example unplugging
USB devices work as expected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24827 a95241bf-73f2-0310-859d-f6bbb57e9c96
FIFO. Reimplemented pipe() to use it.
* pipefs is no longer mounted. Will remove the superfluous code soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24823 a95241bf-73f2-0310-859d-f6bbb57e9c96
inactive until at least one reader and one writer have opened it. As
long as it is inactive, reads from and writes to it just block. When
active, they behave as before (if there's no counterpart writes fail:
SIGPIPE + EPIPE, reads return 0). When both reader and writer count
drop to zero, the pipe becomes inactive again.
* Allocate the ring buffer lazily when the pipe becomes active and
delete it when it becomes inactive.
This makes the pipe implementation FIFO compatible. IOW, FIFOs work as
expected as far as I've tested them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24819 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
based one. The path based version could not have worked for entry removed
notifications at all as the node is removed from the directory at this point
already
* Forgot to delete the device watcher instance after removing all monitors
* The PartitionRegistrar in DeleteDevice() was set to already locked which is
not the case
* Someone probably forgot to add a PartitionRegistrar to the media checker - it
did register the device on each run but never actually unregistered it, which
obviously messed up the reference counting a bit
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24815 a95241bf-73f2-0310-859d-f6bbb57e9c96
Haiku. Support for undefined symbols is nice in principle, but not
really needed for building Haiku itself, and can get little annoying, if
one really just forgot to link in a symbol or has a typo in a function
name in C code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24814 a95241bf-73f2-0310-859d-f6bbb57e9c96
and ino_t instead of a path. Supposed to work with node monitoring messages.
Took the name from vfs_entry_ref_to_path() that takes the same arguments, but
suggestions for a better name are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24813 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented RLE compression for the boot splash images, resulting in
smaller kernel and boot loader.
* Only the boot loader contains the RLE compressed images, the decompressed
buffer for the icons is passed to the kernel via kernel args.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also updating device->open_count must be protected by the device list lock
This fixes the (unlikely) case where a device was removed from usb_disk
standpoint while it still had an open read/write/ioctl operation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24811 a95241bf-73f2-0310-859d-f6bbb57e9c96
if the volume is read-only. This should help with #2028.
* Removed unused bfs_[de]select() functions.
* Removed most paranoia checks - now that we control both sides of code,
this would just hide eventual problems in the VFS code.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24809 a95241bf-73f2-0310-859d-f6bbb57e9c96
within the notifier/writer thread, and will then flush the notifications
directly. This should fix#2008 again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24806 a95241bf-73f2-0310-859d-f6bbb57e9c96
MMU code reserves for the kernel, and we hit that limit recently with the
addition of the boot splash code.
* This fixes the boot crash as triggered by Stippi's recent changes to the
splash image.
* Cleanup (doxygen comments, line length).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24805 a95241bf-73f2-0310-859d-f6bbb57e9c96
configuration of a root hub
* Cut down on number of retries to set the initial device address
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24804 a95241bf-73f2-0310-859d-f6bbb57e9c96
that do not support it (probably because they do not have a cache at all like
in flash media) and this should at least avoid spamming the syslog when this is
the case. It will try 5 times and then disable syncing for that device. Untested
as of yet though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24803 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A device now has one or more LUNs which are used for LUN specific functions
* Adapted these LUN specific functions to the new design and also change the
(un-)publishing accordingly
* Handle "no media" cases more correctly
* Output some interesting device infos also with tracing disabled
* Add some more helpful debug output here and there
Devices that provide multiple logical units (like those n in 1 card readers)
should now be usable with usb_disk too. Also we don't fail when a device is
attached which currently does not contain a media. Instead handle media changes
correctly so inserting a media works as expected. Note that hot-unplugging and
media removal still does not quite work right at the devfs or disk device
manager level and easily crashes the system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24799 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dividing line is back although with a little more spacing. Also the icon
spacing is a little increased and I added a subtle outline as well as a little
brighter background for the active icon look. The placement logic is now not
independant of each other anymore, otherwise I couldn't center both images
as a unit. But only the vertical placement is affected.
Comments as always on the commit mailing list... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24796 a95241bf-73f2-0310-859d-f6bbb57e9c96
volumes with a broken log. It will only allow the volume read-only then,
though (unlike Be's BFS), as your disk could be corrupt.
* Added InitCheck() method to the RecursiveLock class, and now only check
this one in Journal::InitCheck() instead of also replaying the log there;
this is now done directly in Volume::Mount().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24795 a95241bf-73f2-0310-859d-f6bbb57e9c96
