(This is just until we do proper irq-handling)
On my machines it works either way so I'd like to get feedback on this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38695 a95241bf-73f2-0310-859d-f6bbb57e9c96
if the input format requires it. Practically,
it does not work.
* Implement the new meta-data API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38686 a95241bf-73f2-0310-859d-f6bbb57e9c96
the stream is building the index on the fly once.
This allows to seek back to earlier positions, since
then the index will contain entries for later in the
stream and the logic to detect auto-generated indices
was broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38678 a95241bf-73f2-0310-859d-f6bbb57e9c96
muxer by the "default" stream. When I previously tried this,
I mistakenly remembered AV_TIME_BASE to be 1000, but it's
1000000, the same as the native bigtime_t time representation.
Luckily, we can still set all other streams (including the
"default" stream) to be discarded when obtaining chunks
packets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38677 a95241bf-73f2-0310-859d-f6bbb57e9c96
it can be any of these values, hope the priority is right.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38659 a95241bf-73f2-0310-859d-f6bbb57e9c96
frame rate (perhaps it changed in 0.6?). This fixes
playback of several MP4 clips I have for testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38658 a95241bf-73f2-0310-859d-f6bbb57e9c96
the counters, so it's not the average for the entire
decoding time, but for the last five frames. This gives
a more accurate picture of what's going on.
* Added NOTE about possibly removing the SWS version of the
colorspace conversion code unless it's used for otherwise
unsupported conversions. David's code is about 40% faster
in my tests (nice job!).
* Free the sws context in NegotiateVideoFormat, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38651 a95241bf-73f2-0310-859d-f6bbb57e9c96
of support for these codecs and demuxer in the FFmpeg plugin. The
ogg test streams I downloaded play fine now. For example, Big Buck Bunny
would play without video before and ogg files natively encoded with the
FFmpeg plugin wouldn't play at all. Since the removed plugins were not
maintained and were based on external libs themselves, I didn't see the
point in keeping them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38646 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled ogg muxer in MuxerTable.
ogg/vorbis creation successfully tested with MediaConverter.
ogg/theora needs more testing, it seems to work, but I need
to switch from the other vorbis/theora/ogg plugins to the
FFmpeg built-in support, otherwise the current theora stream
is not supported by the old plugin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38641 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order not to clash with the old libtheora in the theora plugin.
x86 CPU optimizations are only compiled for GCC4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38640 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order not to clash with the old libvorbis in the vorbis plugin. I plan to remove
that one after I've done more testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38639 a95241bf-73f2-0310-859d-f6bbb57e9c96
float_to_int16_interleave_sse, since it crashes for reasons
I would have no clue about. Fixes a few duplicated tickets,
which I'll have to sort out later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38636 a95241bf-73f2-0310-859d-f6bbb57e9c96
The changes looks reasonable, although I don't have VMWare to test with.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38602 a95241bf-73f2-0310-859d-f6bbb57e9c96
This might help with ACPI shutdown issues, if not this change can be reverted. Not verified as it works on all my machines even without this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38585 a95241bf-73f2-0310-859d-f6bbb57e9c96
source are instead conditionally included by other source code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38582 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add the new vp3dsp_altivec.c, though.
Should fix the ppc build.
*Untested*
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38581 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Tested and checked most features and fs operations, while passing successfully the Linux fsck. Though the implementation still needs more testing and is to be used with
caution, it's better in my mind to have the code committed now given the size of the patch.
* Code style isn't extensively checked but is mostly OK. Code review is welcome.
Some notes from Janito:
* Sparse files aren't supported and hard links aren't supported. Write attributes methods aren't activated nor tested.
* Journaling needs more testing to make sure it behaves in a compatible way to Ext3, and support for the different modes hasn't been implemented (due to the block
and file cache incompatibility). Correct revoke management is also lacking, as is proper management of the superblock state and copies and block group copies.
* The code is partly based and inspired by the BFS implementation. Author information might need to be fixed.
I'd like to congratulate and thank Janito for his hard work to bring the implementation to the current state. I hope he'll keep on maintaining it and become a regular
contributor/committer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38573 a95241bf-73f2-0310-859d-f6bbb57e9c96
in a CONFIG_GPL #ifdef (should be upstreamed, actually). This fixes
the GCC2 build (and probably GCC4) if the Haiku build is not configured
to include GPL add-ons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38563 a95241bf-73f2-0310-859d-f6bbb57e9c96
GPL code is enabled or not. We need to build it in either case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38561 a95241bf-73f2-0310-859d-f6bbb57e9c96
FFmpeg plugin, which now works for much more files
in my testings.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38556 a95241bf-73f2-0310-859d-f6bbb57e9c96
using vendor branches properly... I remember having to make this change
before... GCC2 build goes much further now, investigating next problem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38554 a95241bf-73f2-0310-859d-f6bbb57e9c96
with regards to using the wrong #include scope in one file and disabling two
apparently unmaintained asserts when compiling in DEBUG mode). I didn't yet test
the GCC 2 build, but I need to get this into SVN since I am having some annoying
file corruption troubles. In fact I am hoping I am not commiting broken files,
but a few seconds ago everything was still building cleanly. One thing that definitely
improved is the (disabled at the moment) AVI support. Every clip I tested so far
plays, which can't be said about our native AVI reader. With the previous FFmpeg
version (a random SVN revision is my guess), many old AVIs played completely broken.
So far, I have not spotted any regressions
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38548 a95241bf-73f2-0310-859d-f6bbb57e9c96
object. Demuxers may actually resize the I/O context buffer,
which would corrupt memory. This is certainly the case in FFmpeg
0.6, don't know if it was a problem before.
* Do not set the time to the packet PTS in Seek(), if it's the magic
value for "no PTS".
* Don't regard the AVInputFormat flags (generic index), we can detect
this more reliably by the observed behavior: Don't trust the found
keyframe if we are obvioulsy building the keyframe index on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38545 a95241bf-73f2-0310-859d-f6bbb57e9c96
Matroska support in the FFmpeg plugin. I have a few streams
to test with, most didn't play right with the Matroska reader,
many simply crash. With the FFmpeg matroska support, most files
do play fine. Seeking the audio stream is a problem, in that
the FFmpeg code does not build the index for the audio stream,
and so seeking always falls back to regions of the file that
have already played. The audio will catch up eventually and
playback will be fine again. A minority of files I could test
with don't work right, those seem all to be older files.
Overall, the support for Matroska files has much improved
with this commit. I am still investigating why FFplay has
no trouble seeking in mkv files, while the FFmpeg plugin only
seeks perfectly in video streams. It may be a problem that
the FFmpeg plugin uses completely separate AVFormatContexts
for each stream, which on the other hand allows to seek BMediaTracks
independently from each other and resolves concurrency issues.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38541 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the thread related methods.
* Explicitely reset the fThread member in
_StopOutputThread().
* Added TODO about the somewhat seemingly fragile method
to ensure the previous buffer for a channel has
been processed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38527 a95241bf-73f2-0310-859d-f6bbb57e9c96
crashes. In some MKVs I have, the FFmpeg implementation
behaves badly when the stream switches from stereo to 6-channel
(weird, but can apparently happen). So simply don't claim
support for AC3, since we have a "native" AC3 decoder which
works much better.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38524 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use old ActivateWindow implementation till the Desktop SendBehind question is solved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38508 a95241bf-73f2-0310-859d-f6bbb57e9c96
returns a frame, and using that very same frame again
for FindKeyFrame() returns a different frame, because
the rounding effects have converted the time to be smaller
than the timestamp that was found for the first call to
FindKeyFrame(). It still happens sometimes, but a lot less
frequently. Ideas appreciated. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38504 a95241bf-73f2-0310-859d-f6bbb57e9c96
could be used.
* Finding keyframes is unreliable. Sometimes the index
is built on the fly, without us knowing. The file will
become seekable after we have decoded those parts.
This however means that seeking may not have been successful.
To know the seeked to frame, we extract the next packet
and returned the true current frame in the in/out arguments
to seek.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When the client didn't suggest it, take the sample
size into account.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38494 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled the DTS decoder. The codec tag is fake,
but as long as Readers use this, it will work.
Currently only works with the FFmpeg reader, though,
and I tested only with matroska containers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38493 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered some methods in the source to align with declaration order.
* Applied naming conventions for private methods.
* Switched asterix style in MixerInput.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38488 a95241bf-73f2-0310-859d-f6bbb57e9c96
settings. (There is a common "mixing frame rate" to which all inputs
resample, before the MixerCore resamples to the frame rate of the
output.)
* Some more coding style fixes in MixerCore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38479 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use more title space in stacked tabs.
- Fix tab movement in stacked mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38475 a95241bf-73f2-0310-859d-f6bbb57e9c96
accepted. This should have been the reason for Duggan's problem with DHCP
as part of bug #6454.
* Stippi's router seems to answer DHCP requests with broadcasts to the future
broadcast IP address. Luckily, it's also a link layer broadcast, so we let
the upper protocols decide what to do with it, depending on that; this could
also be done depending on the existence of any unconfigured networks.
* This should fix Stippi's DHCP problems, and therefore bug #6454 - in any
case, this will be the last try before my vacation :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38450 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the name "abc" existed, it would be returned when opening any attribute
starting with "abc".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38432 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes (a harmless) out of bounds array access, and CID 1359.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38423 a95241bf-73f2-0310-859d-f6bbb57e9c96
Note this leads to KDL if there is a write error, so it may not be the best way for a floppy...
This allows the driver to uninitialize properly when all devices are unplugged, which in turns permits updating the driver without rebooting to unload it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38410 a95241bf-73f2-0310-859d-f6bbb57e9c96
discovered by Coverity for some reason): commands without arguments would
overwrite memory (in this case the sConsole::arg_count only, though).
* Travis's copyright was missing in blue_screen.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38409 a95241bf-73f2-0310-859d-f6bbb57e9c96
The floppy icon is based on zumi's one. changes done :
* I made the floppy a bit thinner, it looked more like a zip100 cartridge
* I added an USB logo (or something that more or less looks like one) on the floppy label
* The logo only shows at big icon sizes since I couldn't get it looking good at small ones.
Feel free to improve.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38407 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Write operation will always return an error, one needs to send request sense until the write is actually done.
This gets floppy writing working.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38406 a95241bf-73f2-0310-859d-f6bbb57e9c96
This gets read capaity working, the device shows up in drivesetup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the mp3_reader and mp3_decoder from the image and from
the source tree even. The mpeg123lib based decoder was crashy,
since the lib didn't cope with bad input data too well, whatever
the reason, but bad input can also be a specially crafted file.
I didn't see the value in keeping two decoders around that use
a third party library as backend. While reading in the mp3_decoder
code, I even saw that it used global variables in the mpeg123 lib
to figure out framerate and channel count, after decoding a bit of
input. Obviously this has concurrency issues.
* Removed the mp4_reader from the image. It is native code, and should
perhaps be preferred over imported code, but I don't have the
resources to look into it, and David doesn't seem to have the time
either. There are basically three types of problems with the
native mp4 reader: 1) It is way too CPU intensive. I have many HD
files that don't play at all, since there is not enough time left
for actual decoding. 2) Seeking leaves a lot of visual artifacts
(with the very same decoder plug-in), since there seems something
wrong either with finding true keyframes, or with flushing buffers
correctly. And 3) very often audio stops working at all after
seeking. Sometimes a keyframe is returned for audio which is very
far away from the wanted frame, which currently triggers bad
behavior in the audio producer node in MediaPlayer and can even
crash the media_addon_server. With the ffmpeg based mp4 reader,
none of these problems exist: Seeking is perfect, no artifacts,
CPU load is low enough for pretty much all HD clips I tested with,
and audio always works and is always in perfect sync with the video
after seeking.
If there are regressions after this commit at all (I tested a lot of
files), then I anticipate only that the ffmpeg plugin does not advertise
support for files it could actually handle (i.e. easily fixable). In
those cases hopefully a test stream can be made available. If the
native mp4 reader is improved to the point that it works as well as
the ffmpeg mp4 demuxer, we can easily switch it back, but for now, users
will prefer reliable playback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38403 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Ask the drive for its status after each command we send, or else it locks up
THis get us as far as trying to read the drive capacity, but this still fails for some reason.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38402 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Output more information in AVFormatReader::StreamCookie::Open(),
AVInputFormat flags for example.
* Added CODEC_ID_AAC handling when codecTag is 0. Adds support
for AAC in Matroska containers when the ffmpeg plugin is enabled
to handle those.
* Added some rounding to frame<->time conversions.
* AVFormatReader::StreamCookie::Seek() forgot to pass the seek
flags to av_seek_frame().
* The most important fix is this, though: There are formats which
build the keyframe index on the fly, while parsing the stream!!
These means we can only seek to real keyframes for parts of the
stream that has already been decoded. Handle this situation by
assuming we can seek to the requested frame/time. This change
fixes the use of the AVFormatReader as MP3 reader.
* Anothe important fix is to ignore the nb_frames member of the
stream for the total frame count. This makes MP4 movies
also work perfectly now when the AVFormatReader is used for them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38401 a95241bf-73f2-0310-859d-f6bbb57e9c96
gives the deprecated warning... We need to cache an AVPacket for this.
* Check the allocation of fOutputBuffer.
* When seeking, we need to flush the already decoded stuff
in fOutputBuffer, and throw away the last chunk buffer as well.
* Handle an incomplete input format at least to the point of not
crashing with a divide error (mp3_reader would give us such an
incomplete format for example).
* _DecodeAudio():
- Fixed some edge cases in the audio decoding loop: avcodec_decode_audio3()
can return a 0 length, which means no error, but no decoded frames
either. ffplay throws away the chunk in this case, do the same.
- Convert some invalid situations that were printf()s into debugger()s.
- Add much more comments to explain how everything works.
* Fixed the occasional coding style issue.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38400 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move the interrupt stuff inside the device structure
* Some cleanup, added some more tracing fordebug purposes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38399 a95241bf-73f2-0310-859d-f6bbb57e9c96
to endpoints. This should help with the final issues of bug #6454.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38397 a95241bf-73f2-0310-859d-f6bbb57e9c96
layer.
* Converted the hash used to the BOpenHashTable instead of khash.
* Fixed remaining GCC4 warnings.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38391 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When writing encoded audio, we were leaking one
temporary buffer per chunk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38388 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check for errors using != instead of < - the functions are not supposed to
return anything above B_OK.
* Use the stack-wide ENABLE_DEBUGGER_COMMANDS instead of our own local solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38386 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is loosely based on usb_disk, but uses a different protocol for sending the commands.
Refactoring is unfinished, so don't look at the style too muh, it will e fixed and cleaned up later.
Basic communication with the drive works (sending commands). Command themselves still mostly untested.
Command Blocks sent to the drive are most likely wrong and may erase your floppies or do any other weird things!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38379 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made sure the 80 character per line limit is honoured.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38370 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly.
* This should finally fix ticket #6454, but I keep it open until it's confirmed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38365 a95241bf-73f2-0310-859d-f6bbb57e9c96
didn't do that for broadcasts - this is still not a full solution as it won't
work for link layer broadcasts, but this should fix most DHCP problems.
* IPv4 multicast doesn't do that yet.
* Only send ICMP errors if it hasn't been a link layer broadcast.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38356 a95241bf-73f2-0310-859d-f6bbb57e9c96
DatagramSocket::AvailableData() locks; introduced a UdpEndpoint::Dump() method
to work around that.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38355 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows to use lower resolution screen modes with black border.
Added a set of TODOs :
* The smaller scren is not centered, but aligned top-left
* The base resolution used is the one reported from edid 1.1, because I'm still not sure how to parse EDID 1.2. This resolution is too small on my laptop, but it works.
Also added two ways of setting 8-to-6 dithering for 18-bit LVDS panel. No visible result for me, unfortunately.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38354 a95241bf-73f2-0310-859d-f6bbb57e9c96
The future cookie was leaked in three of four error scenarios.
Backported from grackle.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Based on Motorola MPC106 User Manual and NetBSD's
src/sys/arch/macppc/pci/grackle.c 1.11. The MPC106 apparently deviates by
requiring the E (enable) bit set to 1 for config read/write to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38344 a95241bf-73f2-0310-859d-f6bbb57e9c96
First B_MEDIA_SEEK_TO_FRAME was handled to compute a time, then
it was ignored and frame was used as time stamp. Also the
conversion from frame to time had the num and den members of
the time base swapped in the computation, so it computed
bogus time stamps. Refactored the conversion methods, always
seek based on the time. Needs more testing (perhaps there are rounding
issues), but overriding a lot of native reader implementations with
AVFormatReader holds up very well now with a lot of files I tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38332 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Read the EDID info on both port A (analog VGA monitor) and C (LVDS panel)
* If an LVDS panel is detected, report the EDID resolutions instead of the BIOs settings
This fixes#6326, likely #5096, and possibly some others intel_extreme problems. Please test.
On the other hand, this make the screen preflet show the full list of more reported by the LVDS panel. As we don't support
scaling, some of these modes are unuseable and lead to a garbled screen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38329 a95241bf-73f2-0310-859d-f6bbb57e9c96
A grackle-compatible Motorola MPC106 PCI controller can be found in the
PowerMac G3 (ticket #6247). For now just let the user know.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38323 a95241bf-73f2-0310-859d-f6bbb57e9c96
problem (since + binds stronger than >>)
Stephan: please review, esp since I don't know how to test this!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38279 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stephan: please yell if you dislike the formatting of the large expressions now
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38278 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make BDADDR_* macros refer to value types instead of addresses
* adjust all interfaces using bdaddr_t* to use (mostly const) refs instead,
which IMHO makes the interface & code clearer
* that got rid of a couple of const incorrectness casts
* some cleanup along the way
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38265 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fix some more #pragma export warnings treated as errors on ppc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38258 a95241bf-73f2-0310-859d-f6bbb57e9c96
constants, which had to be defined in several places in order to be available
in the kernel addons, network protocols and the server/kit.
* enable -Werror for all servers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38213 a95241bf-73f2-0310-859d-f6bbb57e9c96
It makes it easier and less confusing to test catalogs without linking them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38183 a95241bf-73f2-0310-859d-f6bbb57e9c96
the crashing bug reported by Atis when trying to add an interface which fails
(the bug causing this has already been fixed with the previous commit).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38180 a95241bf-73f2-0310-859d-f6bbb57e9c96
really be deleted (a reference of them was kept in memory).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38179 a95241bf-73f2-0310-859d-f6bbb57e9c96
it once more. This should be the final nail on bug #6446.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38178 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast uint32* arguments for atomic_or() to int32*.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38128 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast further pointer arguments for B_HOST_TO_LENDIAN_INT32 to uint32.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38127 a95241bf-73f2-0310-859d-f6bbb57e9c96
#6446, although I could not reproduce the exact problem.
* net_datalink::is_local_[link_]address() now releases a previous reference if
the _interfaceAddress arguments does not point to NULL.
* When a buffer is received from a device, it's interface_address should be NULL
already.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38118 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast pointer arguments for B_HOST_TO_LENDIAN_INT32 to uint32.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38114 a95241bf-73f2-0310-859d-f6bbb57e9c96
that caused the change (but that has not actually been changed yet).
* Also, it will now reset the INADDR_ANY local address in case there is no
other address configured. This should help with automatic configuring after
deletion of an interface address (though it doesn't seem to work yet for
some other reason, at least in VMware).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38110 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast return value of __swap_int32 to uint32_t, as suggested by Ingo.
Remedies uint32 %08x warnings treated as errors in the Big Endian code path.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38106 a95241bf-73f2-0310-859d-f6bbb57e9c96
change the current MII management, but I ran out of time.
* This should fix bug #6295.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38078 a95241bf-73f2-0310-859d-f6bbb57e9c96
as well (of course, no address is created automatically here).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38058 a95241bf-73f2-0310-859d-f6bbb57e9c96
now has an almost equivalent logic to the old setters like SIOCSIFADDR.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38054 a95241bf-73f2-0310-859d-f6bbb57e9c96
they will no longer be unset - instead they are set with defaults.
* If B_SOCKET_SET_ALIAS gets an index of -1, it will now try to find the local
address, and if that fails, will just use the first address there is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38053 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Not plugged anywhere yet.
* I'm not sure the downsampling is done properly, either.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38037 a95241bf-73f2-0310-859d-f6bbb57e9c96
it's not needed for locally received buffers. This fixes a doubled
initialization for a single device when there is more than a single domain
involved. Reported by Atis.
* Fixed missing call to unregister_device_deframer() in case there was not
enough memory to allocate the loopback_frame_protocol object.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38002 a95241bf-73f2-0310-859d-f6bbb57e9c96
"clicks" field of the mouse message as everywhere else.
* Renamed Decorator::Clicked() to MouseAction().
* Minor style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37996 a95241bf-73f2-0310-859d-f6bbb57e9c96
the buffer, and we also need to release it when freeing it.
* Adapted patch by Atis: append_cloned_data() now preserves the stored header;
this is kind of bad, because it will not notice if the original header is
removed, but this could probably just be documented this way.
* Also print the reference count of the interface addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37993 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order to be able to use SIOCSIFADDR (and friends) on a net yet added
family superfluous; we now add a new address when needed on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37990 a95241bf-73f2-0310-859d-f6bbb57e9c96
using it - hopefully, that is actually correct (it's adopted from FreeBSD).
* Fixed bug that cut off the sockaddr_dl reported by the system, so that DHCP
wouldn't work anymore (and ifconfig wouldn't show the actual MAC address
anymore).
* Changed the listing code to actually pad to ifreq size, and leave the length
of the sockaddr untouched.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37941 a95241bf-73f2-0310-859d-f6bbb57e9c96
sockaddr_storage here (wasn't that bad before, as ifreq has a 30 bytes buffer
after the sockaddr.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37940 a95241bf-73f2-0310-859d-f6bbb57e9c96
effectively rejecting any try to set an address.
* It now copies the new address as well in order to make sure that its
sa_len field is set correctly.
* Improved debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37937 a95241bf-73f2-0310-859d-f6bbb57e9c96
smaller than sizeof(sockaddr). This fixes a compatibility issue with other
platforms - portable software often assumes that the amount of bytes to
add to an ifreq structure is the larger amount between sizeof(ifreq), and
basically what the _SIZEOF_ADDR_IFREQ() macro returns, instead of always
relying on that macro.
* Renamed UserBuffer::Copy() to Push, ConsumedAmount() to BytesConsumed(),
added Pad() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37927 a95241bf-73f2-0310-859d-f6bbb57e9c96
arp_update_entry() for known entries, as it also uses that to update the
timestamp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37923 a95241bf-73f2-0310-859d-f6bbb57e9c96
old address is NULL for anything but SIOCAIFADDR. Hopefully, this fixes the
problem Rene is seeing.
* Make sure that arp_entry::protocol is not NULL before using it. This is
necessary because of the possibility to manually set ARP entries.
* Further improved debug output.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37916 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made FAT add-on use get_timezone_offset(), this time correctly adjusted for
the difference in units (minutes/seconds)
This makes the times in our FAT-fs agree with Linux again, at least :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37905 a95241bf-73f2-0310-859d-f6bbb57e9c96
This enable to actually detect and handle device removal (USB...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37897 a95241bf-73f2-0310-859d-f6bbb57e9c96
* dropped DaylightSavingTime from real_time_clock code in kernel, it was
never really being used for what it meant (and just being referred to by
gettimeofday(), which put a different meaning to it
* adjusted the syscalls get_timezone() & set_timezone() as well as their callers
accordingly
* got rid of get_rtc_info() and rtc_info struct in kernel, as it was only
being referred to by the FAT add-on and that one (like gettimeofday()) put a
different meaning to tz_minuteswest. Added a comment to FAT's util.c
showing a possible solution, should the hardcoded GMT timezone pose a problem.
* fixed declaration of gettimeofday() to match POSIX base specs, issue 7
* changed implementation of gettimeofday() to not bother trying to fill struct
timezone - it was using wrong values before, anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the return type of remove_interface() void, as it cannot fail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37884 a95241bf-73f2-0310-859d-f6bbb57e9c96
global name space, and have ugly identifiers for nothing :-)
* Added a flags field to struct ifaliasreq. Added flags to mark an alias that
is currently being configured, or has been automatically configured.
Those flags aren't used yet, but they will replace IFF_CONFIGURING and
friends.
* Implemented deleting addresses only from interfaces via ifconfig.
* Added more command aliases for delete to ifconfig ("del", and "delete", for
more consistency with route).
* Fixed control_routes() to only release a reference to an address if it
actually got one before.
* If an interface address is deleted, its routes are now removed as well.
* InterfaceAddress now holds a reference to its interface as planned.
* Implemented removing interfaces. Works quite nicely.
* When downing an interface, all of its routes are now removed. When upping
it again, at least the default routes are added.
* datalink.cpp's get_interface_name_or_index() leaked a reference to the
interface found.
* SIOCAIFADDR would also leak a reference when new addresses were added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37872 a95241bf-73f2-0310-859d-f6bbb57e9c96
send_datagram() to send_data().
* Renamed DatagramSocket::SocketEnqueue() to EnqueueClone(), SocketDequeue()
to Dequeue().
* Ordered the methods in ProtocolUtilities.h according to their declaration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37870 a95241bf-73f2-0310-859d-f6bbb57e9c96
type one wants to receive. Changed ipv6_datagram to use that (but note that
it currently does not compile).
* Header cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37868 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since they all work reasonalbly well, add them to the default image. (beOs had them after all)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37864 a95241bf-73f2-0310-859d-f6bbb57e9c96
receive raw packets (only without the ethernet framing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37853 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface_protocol_send_data() which accessed the monitors unlocked.
* Changed SIOCCPACKETCAP to check if the device name matches the one used with
SIOCSPACKETCAP.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37845 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of datalink.h.
* Only allow sending/receiving of packets through AF_LINK for root (not that
sending would be implemented yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37844 a95241bf-73f2-0310-859d-f6bbb57e9c96
SIOC_IF_ALIAS_ADD, SIOC_IF_ALIAS_REMOVE, SIOC_IF_ALIAS_GET, SIOC_ALIAS_SET,
and SIOC_IF_ALIAS_COUNT.
* Implemented all of those new ioctls, though they are yet untested.
* Added ifreq::ifr_data, and removed the hack in the FreeBSD compat if.h
header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37806 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The is_empty_address() function of AF_UNIX did not deal correctly with empty
addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37804 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface - this caused quite a number of changes.
* Network interfaces, and its addresses are now reference counted (not yet
complete, though, InterfaceAddresses need to hold references to their
interface as well).
* There are two known regressions of this commit that I will fix later:
- you cannot remove interfaces anymore
- IPv4 multicast was broken anyway, but now it's disabled, too.
* Moved a device_interfaces.cpp|h out of interfaces.cpp.
* The datalink layer chain is now instantiated per domain per interface,
not just per interface anymore.
* When a buffer reaches the network layer, it has no known interface yet, ie.
the ipv4|6|whatever modules need to set this manually.
* Added more debug output, and some new debugger commands, the control option
is now printed in clear text.
* Added hash_address() function to the address modules. Added "const" to
set_to_defaults() where needed.
* Fixed net_buffer's restore header functions offset use as reported by Atis.
* Improved buffer dump output, use the domain module to print the address if
available.
* Moved net_buffer::type into the union, as it's not needed by the upper layers
anymore.
* Moved IPv6 specific code from {add|remove}_default_route() to where it
belongs, but disabled it for the time being.
* Completely discarded useless ipv4_datagram module.
* Added ping6 to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37794 a95241bf-73f2-0310-859d-f6bbb57e9c96
as correctly pointed out by Ingo these are no setting files.
* Use find_directory() here and in places marked with TODOs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37772 a95241bf-73f2-0310-859d-f6bbb57e9c96
(closed ticket #6380).
* Changed path to /boot/common/settings.
Someone feel free to change the implementation to get
the path from find_directory(...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37761 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead, ie. ICMP errors are only forwarded to connected UDP sockets.
* Also notify the DatagramSocket's dequeue loop if an error occurs - this makes
udp_unreachable finally work as intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37714 a95241bf-73f2-0310-859d-f6bbb57e9c96
do not get the '_' prefix, only private ones do).
* Added a "peek" argument to SocketStatus() (and generally renamed "clone" to
"peek" where it made sense).
* Implemented the base version of SocketStatus() to return the actual socket
error. This enables returning ICMP errors back to the socket user.
* Other minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37712 a95241bf-73f2-0310-859d-f6bbb57e9c96
protocol, and cut off its IPv4 header before forwarding the buffer to the
upper layers.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37711 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also, we need to set the buffer's protocol.
* Now we actually send correct ICMP messages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37710 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Set the AVContext->frame_size, though I don't think it has any effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37707 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This fixes the second problem mentioned in bug #6243, and therefore the bug
itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37692 a95241bf-73f2-0310-859d-f6bbb57e9c96
upper layers: you use the store_header() function to mark the header you want
to preserve. All subsequent remove_header() calls won't claim the actual
data, but only move the node start around.
* This header can then be restored by restore_header(). However, a call to
prepend_data() will destroy the stored header. Also, if remove_header() cuts
off a whole node, restoring the header won't succeed anymore.
* Discarded the no longer needed net_buffer::network_header field.
* Also discarded the hoplimit field which temporarily breaks the IPv6 build
until Atis reworks it.
* IPv4 now also dumps the IP header in the send path if debug output is enabled.
* icmp_error_reply() might be called so early that the net_buffer's addresses
do not point to the reply address; this is now detected, and the addresses are
taken out of the IP header in that case.
* Improved dumping the net_buffer to also include its address, and flags.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37688 a95241bf-73f2-0310-859d-f6bbb57e9c96
unreached ICMP messages now, and at least signal an error to select() (there
is no mechanism yet to actually forward the error to userland).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37651 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Therefore, IPv4 no longer needs to mess with that (incorrectly, anyway).
* Removed unused include, turned off ICMP debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37650 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of always returning B_OK.
* deliver_multicast() now takes the protocol restriction of a raw socket into
account.
* raw_receive_data() now correctly returns whether a buffer was delivered (due
to the protocol restriction, this wasn't the case before).
* ipv4_receive_data() leaked all multicast buffers.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37648 a95241bf-73f2-0310-859d-f6bbb57e9c96
2007), and Yin Qiu (GSoC 2008). And even though I needed to rewrite pretty
much all of it because of the countless bugs and problems it had, it still
shares the same architectural problems of introducing a domain dependent
error mechanism to the upper layers, and needing the
net_buffer::network_header hack. This I will rework later.
* net_buffer's append_size(), and prepend_size() will now gracefully handle
buffers without a data node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* MacDecorator : use _InvalidateFootprint and implement _MoveBy. This makes the MacDecorator work fine again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37615 a95241bf-73f2-0310-859d-f6bbb57e9c96
directly here), I made only a few style changes:
* introduced 'has_broadcast_address' field in
struct net_address_module_info
- REVIEW: the name, and the status of this field for UNIX and L2CAP
families
* ipv6 address family support
* ipv6 address printing
* ipv6 protocol support
* ipv6 multicast support
- TODO: add and remove multicast routes in a more proper way
- TODO: support MLD
* ipv6 datalink protocol support
* icmpv6 protocol support (EchoRequest and EchoResponse messages)
* ipv6 neigbor discovery protocol support
(Advertisement and Solicitation messages)
- TODO: only the very basic support is present,
the protocol state machine is by no means completed
- TODO: replying to Solicitation does not work too good ATM
(visible, when pinging Haiku from outside)
* added Jenkin's hash algorith
* minor changes in existing IPv4 code - cleanup function
ipv4_get_loopback_address(), written by myself
* add tests: raw, udp, tcp/udp, mullicast sender
* add 'hoplimit' field in struct net_buffer
- TODO: this is just a hack, more generic approach would be better.
* add 'receive_data' function pointer in
struct net_datalink_protocol_module_info
- TODO: this is also more like a hack, to support information
passing from ICMPv6 to IPv6_datagram level.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37604 a95241bf-73f2-0310-859d-f6bbb57e9c96
hopefully :-)).
* Improved interface change notification to include the flags that changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37594 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_BUFFER_OVERFLOW. It will have returned valid vectors in this case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37572 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've removed it for now, until someone finds the time to look into it.
* Therefore, enabled all supported devices for the rtl81xx driver.
* Made the rtl81xx driver actually work by adding the missing PHYs - it doesn't
use the same PHYs as the rtl8139 driver. Imported the rgephy.c|h from FreeBSD
8 (not yet in vendor branch, but unchanged).
* It seems to work reliably with Gigabit now, albeit a bit slow, and with too
high CPU load.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37425 a95241bf-73f2-0310-859d-f6bbb57e9c96
Will need a different fix to get device to work, but at least Haiku won't crash on bootup with this change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37409 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers. GCC 2 has the unpleasant habit of actually linking the unused inline
functions in. That doesn't suffice to build the userlandfs server with debug
info (it would be the wrong file anyway), but allows to build checksumfs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37405 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the old one from the locale librairy, with some cleanup
Known regressions :
* readonlybootprompt will no longer update the locale settings : the
method used messed with internal undocumented things
* external localized apps (webpositive for example) will not run
anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37336 a95241bf-73f2-0310-859d-f6bbb57e9c96
