will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
theoretically write the given page.
* page writer: Fixed the incorrect check whether a temporary page can be
written by using the new CanWritePage().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30281 a95241bf-73f2-0310-859d-f6bbb57e9c96
bytes.
* strlcpy() isn't a particularly good string compare function.
* BDebugEventInputStream::_GetData():
- Also need to reset fBufferPosition to 0 when the buffer is empty.
- Fixed read position.
BDebugEventInputStream does now actually read the files written by
BDebugEventOutputStream.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30273 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked some of the transfer handling after reading the specs.
* Ensure that the device selection bit is set correctly for all commands.
* Generally disable interrupts and enable them only when expecting a DMA one.
* Renamed disk failure to device fault according to specs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30248 a95241bf-73f2-0310-859d-f6bbb57e9c96
system profiling interface and added classes BDebugEvent{Input,Ouput}Stream for
reading/writing those files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30244 a95241bf-73f2-0310-859d-f6bbb57e9c96
passed in a structure now, so it is easier to extend it and ignore unused
parameters.
* One can now select which system profiling events one is interested in.
* Added scheduling events to the system profiling interface. Those are pretty
much the ones recorded when scheduler tracing is enabled. Still missing are
the "wait object" events that allow to interpret what a thread is waiting
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30243 a95241bf-73f2-0310-859d-f6bbb57e9c96
input_server filter if the screen saver should be run could be confused if
additional option flags were turned on. I've removed the SAVER_DISABLED
definition completely. Also, I renamed the confusing "fEnabled" member, which
really means "saver already running".
Thanks a lot! Fixes ticket #3474.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30207 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointed out, there is also an unsolvable race condition with BFS that other
file systems should share.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30204 a95241bf-73f2-0310-859d-f6bbb57e9c96
profiling events.
* profile: Avoid using get_{team,thread}_info() in common code paths. The
system profiling mode is asynchronous, so the team or thread in question
could already be gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30193 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug context now. That's all it needs.
* Added the option "-a" to the profile command line tool. It triggers profiling
of the whole system. There are still some issues, particularly image related
ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30129 a95241bf-73f2-0310-859d-f6bbb57e9c96
methods that used an "event mask" field. There was no need to introduce
a "flags" field for the same purpose.
* Renamed protected DefaultNotificationService methods (removed "_" prefix).
* Adjusted the code providing a notification service accordingly.
* Changed the event message several notification services generated by renaming
the "opcode" field to "event".
* Implemented the TEAM_ADDED event and also added a TEAM_EXEC event.
* Added notifications for threads and images.
* Added visitor-like iteration functions for teams, threads, and images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30126 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers/private/shared is newer, though with small interface changes.
* Removed the unnecessary Debug.h include in
headers/private/shared/ObjectList.h.
* Adjusted sources using these headers, mostly by adding missing includes.
* Lots of automatic whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30123 a95241bf-73f2-0310-859d-f6bbb57e9c96
removed it from the public namespace, and made it only visible when linking.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30071 a95241bf-73f2-0310-859d-f6bbb57e9c96
for binary compatibility).
* Always round the bar thickness, or we get drawing artefacts.
* Cleaned up the header following our coding style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30070 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the BParameterWeb::{Start|Stop}Watching() methods again, as the same
thing can be achieved using the BMediaRoster already (even though it doesn't
seem to work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30058 a95241bf-73f2-0310-859d-f6bbb57e9c96
but doesn't really do anything more than before.
* It also replaces everything IDE with ATA counterparts and cleans up a lot
of the definitions.
* Cleaning up the old ATA bus_manager as well as some license headers missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30049 a95241bf-73f2-0310-859d-f6bbb57e9c96
as on Dano - since the functionality is already there, those two functions
aren't really needed, though, so we could remove them again.
* Cleaned up DataExchange.h, and added basic reply/request structs for anything
that needs an area.
* BControllable now uses a helper class ReceiveTransfer to deal with requests
with areas.
* Major style cleanup of MediaRoster.cpp, though one could still bury some
hours there...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30045 a95241bf-73f2-0310-859d-f6bbb57e9c96
stubs.
* However, without a working Dano at hand, I can't really implement something
compatible, so I'll postpone this to some later point.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30030 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adapted and cleaned up ParameterWeb.cpp.
* Fixed some copy&paste bugs in the BTextParameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed _FindXXXWordBoundary() methods to _Previous/_NextWordBoundary()
since the respective per-char methods are named this way
* started to work on improving the behaviour of page-up/page-down
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30012 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This fixes the problem when a socket changes something with regards to its
parent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30000 a95241bf-73f2-0310-859d-f6bbb57e9c96
* reverted my recent change that caused Mail to always show the end
of mails 8-) and now invoke ScrollToOffset() wherever it was missing
(mostly in keyboard-related methods)
* _DoInsertText() only moves the caret if the text has been inserted
in front of the caret, not after it
* overhauled selection by char/word/line and their extension mechanism
(which now behaves as the haiku shell)
* use strnlen() instead of strlen() in those versions of Insert() which
accept a length parameter, as strlen can potentially waste a lot of
cycles skipping the whole string, when all we want is to clamp the length.
* cleanup (some of it automatic removal of trailing whitespace)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29995 a95241bf-73f2-0310-859d-f6bbb57e9c96
better, though :-)
* Also fixed a mixup of the unintuitive argument order of our
atomic_test_and_set(); I guess I will change that sooner or later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29994 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed DoublyLinkedList::Size() to Count(), since it actually counts the
items (ie. O(n)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29979 a95241bf-73f2-0310-859d-f6bbb57e9c96
* optimized unmapping of a single page that was rather inefficient
for large areas
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29978 a95241bf-73f2-0310-859d-f6bbb57e9c96
kits/shared since i plan to use it in other places like Tracker. Animated replicants like
ActivityMonitor wont stall anymore when initiating the drag. (On the desktop, Tracker's mouse
tracking still busy loops sometimes, that's next on my list).
I had asynchronous long click detection (one button mouse support) in it but decided to get rid of
it, it adds unneeded complexity in the code and is even getting in your way sometimes (ex: now you can
take your time to drag the dragger, you wont be interrupted). If we want to reimplement that
someday it should be done system wide anyway (only Tracker and replicants have that 'feature'
AFAIK).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29972 a95241bf-73f2-0310-859d-f6bbb57e9c96
we request the drawing via Invalidate() - this make use of the app-server's
potential double buffering, whenever that is active. This change reduces
flickering in VESA mode considerably.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29962 a95241bf-73f2-0310-859d-f6bbb57e9c96
custom provided one. Incidentally makes #1775 (that i'll reopen in a moment, see r29947) a
lot less likely to happen for most users since it can now only happen with those
customized popups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29949 a95241bf-73f2-0310-859d-f6bbb57e9c96
the protocoll less prone to errors, reduces possible points of failure and
most importantly, reduces the number of function calls to the link API.
I only know the numbers for StrokeLine(), which I tested via the Benchmark
test app. With this change, drawing random colored and positioned lines
actually doubled in speed. On the BView side, the calls to
ServerLink::Attach() only halfed, while on the app_server side, the number
of calls to ServerLink::Read() is now 1/4th. It will also be worth
investigating why the link stuff is so slow at all. I also optimized
BView::DrawString() a lot in this change, but I don't have any numbers
yet. Some other commands which used multiple Attach()/Read() calls were
also optimized, at least the most important ones. Begin/EndLineArray() was
also pretty bad on the app_server side.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29937 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
the current thread, now. Implemented by introducing a new base class
KernelRequest which has respective attributes.
* Server: RequestThreadContext does now also save the request that is being
processed. Furthermore some space has been reserved for file system specific
data, which can be initialized by the new
FileSystem::InitRequestThreadContext().
* FUSE library: Implemented fuse_get_context() using the new
RequestThreadContext feature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29872 a95241bf-73f2-0310-859d-f6bbb57e9c96
on screen (ie including the decorator border and tab). Plus the necessary
refactoring as well as some TODO notes about windows with the tab on the left
side.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29820 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add some more operator
* adjust some functions to behave properly an invalid values
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29792 a95241bf-73f2-0310-859d-f6bbb57e9c96
an existing background. It's not supported by many frame types yet, but BButton
and TextControl frames work as well as the soft recessed frame which many
controls use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29762 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the bit in order not to clash with the tile options.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29754 a95241bf-73f2-0310-859d-f6bbb57e9c96
FreeBSD version (r188928). Note to JiSheng: I did have to fix fwcontrol.c line
111, looked like a last minute change to me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29752 a95241bf-73f2-0310-859d-f6bbb57e9c96
newly created dir. The VFS really doesn't need it and for some file systems
it might not be easy to get by. Several file systems (e.g. rootfs and fat)
were ignoring the parameter anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29719 a95241bf-73f2-0310-859d-f6bbb57e9c96
which makes the resessed frame blend better with the surroundings. This can
be seen best in Keymap, where a different color is set on some buttons, but
the resessed frame should still be the same across all those buttons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29716 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix broken Time_t function
* take the missing days into account when adding months
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29713 a95241bf-73f2-0310-859d-f6bbb57e9c96
light-weight read-write lock, that doesn't use a semaphore itself. Locking
and unlocking has to be done via methods of RWLockManager. This combo allows
lots of locks without risking to hit the semaphore limit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added AutoLocker constructor with the locking strategy as parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29685 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed dead code which was for drawing a BButton like R5.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29677 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add support for reading the size of internals buffers of the bt chips
- Add support for Resetting the Device
- Add broadcom vendor command fro writting the bdaddr
- clean up the debug output
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29669 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _InitMenuBar() had the meaning of fixedSize reversed. The layout-mode
constructors pass fixedSize = true accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29664 a95241bf-73f2-0310-859d-f6bbb57e9c96
result in the BMenuField not always drawing all of the frame around the
menu bar correctly, for example cutting off at left for divider = 0.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29660 a95241bf-73f2-0310-859d-f6bbb57e9c96
ported software:
* If the macro B_USE_POSITIVE_POSIX_ERRORS is defined the POSIX error code
constants (ENOMEM, EINTR,...) will have positive values.
* Introduced the macros B_TO_{POSITIVE,NEGATIVE}_ERROR() which do convert a
given error code to a positive/negative value.
* Added static library libposix_error_mapper.a that overrides all POSIX
functions (save the ones I forgot to add :-)) directly meddling with error
codes (having them as parameter or returning them) dealing with the
positive<->negative error code conversions. The functions have hidden
visibility, so they affect only the shared object they are linked into.
* So ideally all one has to do is to build a ported software with
-DB_USE_POSITIVE_POSIX_ERRORS and -lposix_error_mapper and be good with
respect to error code problems.
* Potential issues:
- When mixing ported and Haiku native code, i.e. using Haiku native code in
a ported software or using a ported library in a Haiku native application
care must be taken to convert error codes where the two interface. That's
what the B_TO_{POSITIVE,NEGATIVE}_ERROR() macros are supposed to be used
for.
- A ported static library can obviously not be linked directly against
-lposix_error_mapper. The shared object linking a against the ported static
library has to do that. The previous point applies when that causes mixing
with Haiku native code.
- When dependent ported libraries are used probably all of them should use
the error mapping.
Comments welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29653 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Implement mechanism GetProperty to retrieve detailed information about the LocalDevice
- Generic BluetoothDevice interface changed and adapted
- Implement ReadLocalVersion to be aware of the bluetooth specification supported by our localdevice
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29639 a95241bf-73f2-0310-859d-f6bbb57e9c96
flags would not tell anything, since B_SINGLE_LAUNCH equals 0.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29636 a95241bf-73f2-0310-859d-f6bbb57e9c96
TODO: Adjust BScrollBar to use it.
TODO: Make it virtual like the others, but I don't want to break Vision and
other native Haiku apps just now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29630 a95241bf-73f2-0310-859d-f6bbb57e9c96
device additions/removals can be monitored.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29582 a95241bf-73f2-0310-859d-f6bbb57e9c96
We do some caching using a hash table indexed by the operations vector.
* Pass the vnode capabilities to the kernel module.
* In the kernel tailor the operation vectors for volumes and vnodes passed to
the VFS according to the respective capabilities. This way those vectors look
pretty much like those from the client FS. This saves unnecessary calls when
hooks are not implemented and should also fix compatibility problems in cases
where not implementing a hook and returning an error don't mean the same to
the VFS.
* Inlined some of the kernel module Volume class getters.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29572 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Send() now also gets the message to send as parameter.
- Added methods to reserve and unreserve space in the buffer.
* RequestAllocator: Uses the port buffer reservation methods now. This allows
to let more than one RequestAllocator use a Port in a stack-like manner.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Change Port::Receive() semantics. It does no longer use the buffer associated
with the object. Instead it allocates heap memory for the caller. Since
there's only one caller who clones the message anyway, we save one copy this
way (though we have an additional syscall in userland) and don't overwrite
a request being prepared for sending.
* Changed RequestAllocator::ReadRequest() to also read the request from the
port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29563 a95241bf-73f2-0310-859d-f6bbb57e9c96
the header is used for compiling with -std=c99 or -std=gnu99 and GCC4, which
has a reverted meaning of "extern inline" (now standard compliant).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pass the request offset and length with the DoIORequest. This allows us to
already get the first vecs for do_iterative_fd_io() in userland, saving a
trip back and forth.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29546 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations that can be used by subsystems that want to have a pretty
standard service. Only the latter is really complete, though.
* The notification manager is now available earlier in the boot process.
* Added notifications to teams/ports (only add/remove).
* The network notification implementation is now using the
DefaultUserNotificationService.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29543 a95241bf-73f2-0310-859d-f6bbb57e9c96
part.
* Implemented a good part of the kernel part for the support of
do_iterative_fd_io(). The forwarding of the callbacks are missing yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29540 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add strings for all bluetooth manufacturers
- Add a bunch of strings for each command
- Add methods to get string given a manufacturer code or a command code
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29526 a95241bf-73f2-0310-859d-f6bbb57e9c96
an on-stack structure for the request in a hash table when forwarding the
io() hook. Create a new object (HaikuKernelIORequest) instead and store it
in a hash table in HaikuKernelFileSystem.
* Some work on the userland side of do_iterative_fd_io().
* Added some missing requests in UserlandFSUtil::is_{kernel,userland}_request().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29505 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be checked.
* Make the usb_keyboard module check the presence of the needed debugger
commands to avoid the error messages in case of them being unavailable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29472 a95241bf-73f2-0310-859d-f6bbb57e9c96
GCC 4.3 and above (conforming to the standard when compiled with -std=c99
or -std=gnu99), define the inline functions as "static inline". I've had
another patch that maintains the previous behavior, but as titer pointed
out, we have no code in our repo that overrides the inlined functions
with their own version, and doing so for any other code would be
problematic, since for example Linux libio.h #defines these as macros.
In any case, I don't really know what I am doing, so please correct me
if I did something stupid! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29471 a95241bf-73f2-0310-859d-f6bbb57e9c96
IORequest.{h,cpp}.
* Introduced public <io_requests.h> header. Currently it only declares the
single function BFS uses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29446 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved new statics to the cpp file as it seems we don't usually expose such internals in our public headers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29443 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't delete fStream if we don't own it, would crash ShelfTest on quit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29439 a95241bf-73f2-0310-859d-f6bbb57e9c96
HashMap and HashSet classes to use the kernel utils OpenHashTable instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29429 a95241bf-73f2-0310-859d-f6bbb57e9c96
RecursiveLock in the kernel.
* Several adjustments according to UserlandFS header changes.
* Re-added reiserfs to image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29410 a95241bf-73f2-0310-859d-f6bbb57e9c96
file cache are missing yet -- requires some refactoring in Volume.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29402 a95241bf-73f2-0310-859d-f6bbb57e9c96
/system/servers, now.
* Got rid of the dispatcher application. It was the entity the kernel module
talked to when mounting a yet unknown FS. It started the client FS server
applications. Now the kernel module starts them directly. They use
respectively named ports, so the kernel module can find them when already
running.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29377 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The I/O context related vfs_*() functions have io_context* instead of void*
parameters/return values, now.
* vfs_new_io_context(): Lock the parent I/O context before getting its table
size. Otherwise the table size could change until we do.
* vfs_resize_fd_table(): Fixed use of MutexLocker. We created only a temporary
object, not one with function scope.
* Renamed load_image_etc() to load_image_internal() and added a parameter for
specifying the parent team of the one to create.
* Introduced a kernel private load_image_etc() with a few more arguments than
load_image().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29375 a95241bf-73f2-0310-859d-f6bbb57e9c96
at a time is supported and volume as well as start time are not taken into
account. For reasons I don't feel like investigating right now all the
BMediaTrack calls in the BTrackReader end up as pure virtual function calls
though, so it's unusable for now.
* Fix leaking the temporary buffer in BSound.
* Whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Split the FSCapabilities bit mask into three bit masks for the FS, the
volume, and the vnodes, since we have three independent FS interface
structures, now. The latter is not supported in the kernel add-on, yet.
* Server:
- Temporarily removed some things from the build (the BeOS interface
and the cache implementations).
- Some WIP in HaikuKernelVolume and [haiku_]kernel_emu.{h,cpp}.
- Added HaikuKernelNode, which wraps fs_vnode for the client FS.
The server is still quite a bit away from being buildable again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29323 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel module compiles again, though newer features like VM file support,
asynchronous I/O, and FS layers aren't supported yet. The userland code is
still completely out of sync and won't even compile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29318 a95241bf-73f2-0310-859d-f6bbb57e9c96
stored now.
* Extended the debugger message for B_DEBUGGER_MESSAGE_HANDED_OVER by the
causing thread.
* Also send B_DEBUGGER_MESSAGE_HANDED_OVER to the debugger to which the team
was handed over. The message will be the very first one the debugger gets
from the team in question.
* Some harmless refactoring (added thread_hit_serious_debug_event()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29302 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed at all when used as intended. Thanks Ingo for the explanation on how this
is intended to work. Adjusted the overlay fs accordingly and updated/reverted
the changes to the other filesystems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29250 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted. This is to allow layered filesystems to setup internal data that
requires all the sub/super volumes to be available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29248 a95241bf-73f2-0310-859d-f6bbb57e9c96
