two different reasons.
* Fixed BMessageBody::FindData() in case of type B_ANY_TYPE, which should
match any matchingly-named field.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10678 a95241bf-73f2-0310-859d-f6bbb57e9c96
preferred handler is addressed. So make sure, it has a usable value in
this case, otherwise ReturnAddress() usually won't work.
* If the message to be read from the port is bigger than the on-stack
buffer, the chunk of memory to be allocated on the heap has to be the
size of the message, not the size of the on-stack buffer. This caused
all kind of nasty, hard-trackable problems.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10677 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also renamed children_next|prev to siblings_next|prev as I was confused by the former.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10671 a95241bf-73f2-0310-859d-f6bbb57e9c96
is now device_attr, pnp_bus_info bus_module_info, pnp_driver_info driver_module_info, ...
Small cleanup (more would be needed, but this has time).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10670 a95241bf-73f2-0310-859d-f6bbb57e9c96
after hardware recognition (but will be moved into a debugger command
later).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10667 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added code to enable deskbar replicant loading after input_server is started
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10664 a95241bf-73f2-0310-859d-f6bbb57e9c96
The driver now works by default on NV40 and higher, but without acceleration.
If someone tests using overlay, let me know if it actually works: NV43 seems to have a new engine, NV40 _might_ still have the old, and so, useable engine.
NV40-plus overlay is something we will NOT have any time soon!
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10651 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug output - to activate it, you now have to enable it in the kernel
settings file ("bochs_debug_output true").
Reimplemented the serial output so that it's flexible towards the base
port at run time.
Implemented support for kernel settings "serial_debug_port" (which can
now also be an index in the BIOS provided serial ports list), and
"serial_debug_speed".
That also means that you can finally use the same kernel executable
under BeOS Bochs and on a real system without any restrictions.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10642 a95241bf-73f2-0310-859d-f6bbb57e9c96
holder did not change (required for booting properly).
Also added a ToDo comment about a required mutex API change in order to
be able to return a status that indicates failure.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10639 a95241bf-73f2-0310-859d-f6bbb57e9c96
settings and use that one as standard video size (but ignores the depth
parameter for now).
It will be the app_server's responsibility to keep this file up to date.
This file should no longer be edited by users.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10637 a95241bf-73f2-0310-859d-f6bbb57e9c96
menu is shown - the logo is now shown after the menu anyway.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10636 a95241bf-73f2-0310-859d-f6bbb57e9c96
The driver settings are put into the kernel_args memory section and
copied on kernel startup.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10635 a95241bf-73f2-0310-859d-f6bbb57e9c96
It will now load all settings in the kernel driver settings directory
and pass them over to the kernel (unparsed).
Additionally, it allows other parts of the boot loader to access
driver_settings just like in the kernel.
Moved the switch to the logo in the boot loader much further to the end
of the boot loader's life cycle. This is done so that the boot loader
can directly use the video mode as configured in Haiku, without a jumping
logo. Since the delay will be noticeable on a real system, we might want
to introduce a second different boot logo, though. We'll see.
stdio.cpp now also exports errno (and _errnop). Might be changed to a
different approach later as well (it's now done this way so that strtol.o
can be taken over unchanged from libroot.so).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10634 a95241bf-73f2-0310-859d-f6bbb57e9c96
and the boot loader.
When compiled in the kernel, driver settings are cached and may be used
without disk access at all.
Added some comments.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10632 a95241bf-73f2-0310-859d-f6bbb57e9c96
