* find_directory() and hard-coded paths use /boot/system instead of
/boot/common.
* The build system creates the writable directories in /boot/system
instead of /boot/common.
* The build system no longer installs any packages in /boot/common.
Support for 64-bit atomic operations for ARMv7+ is currently stubbed
out in libroot, but our current targets do not use it anyway.
We now select atomics-as-syscalls automatically based on the ARM
architecture we're building for. The intent is to do away with
most of the board specifics (at the very least on the kernel side)
and just specify the lowest ARMvX version you want to build for.
This will give flexibility in being able to distribute a single
image for a wide range of devices, and building a tuned system
for one specific core type.
As korli suggested use B_PAGE_SIZE for defining stack size related
definitions what seems to be more natural for them and also may
help if we ever support an architecture with page size different than
4kB.
As korli suggested use B_PAGE_SIZE for defining stack size related
definitions what seems to be more natural for them and also may
help if we ever support an architecture with page size different than
4kB.
* Mostly useful for virtualization at the moment. Works in QEmu.
* Can be enabled by safemode settings/menu.
* Please note that x2APIC normally requires use of VT-d interrupt remapping feature
on real hardware, which we don't support yet.
* If at least one image is either B_HAIKU_ABI_GCC_2_ANCIENT or
B_HAIKU_ABI_GCC_2_BEOS almost all areas are marked as executable.
* B_EXECUTE_AREA and B_STACK_AREA are made public. The former is enforced since
the introduction of DEP and apps need it to correctly set area protection.
The latter is currently needed only to recognize stack areas and fix their
protection in compatibility mode, but may also be useful if an app wants
to use sigaltstack from POSIX API.
This patch introduces randomization of commpage position. From now on commpage
table contains offsets from begining to of the commpage to the particular
commpage entry. Similary addresses of symbols in ELF memory image "commpage"
are just offsets from the begining of the commpage.
This patch also updates KDL so that commpage entries are recognized and shown
correctly in stack trace. An update of Debugger is yet to be done.
x86_userspace_thread_exit() is a stub originally placed at the bottom of
each thread user stack that ensures any thread invokes exit_thread() upon
returning from its main higher level function.
Putting anything that is expected to be executed on a stack causes problems
when implementing data execution prevention. Code of x86_userspace_thread_exit()
is now moved to commpage which seems to be much more appropriate place for it.
Inside the page randomization of initial user stack pointer is not only a part
of ASLR implementation but also a performance improvement that helps
eliminating aligned 64 kB data access.
Minimal user stack size is increased to 8 kB in order to ensure that regardless
of initial stack pointer value there is still enough space on stack.
* Added the aforementioned functions.
* create_area_etc() now takes a guard size parameter.
* The thread_info::stack_base/end range now refers to the usable range
only.
Reused x86 arch_user_debugger.cpp, with a few minor changes to make
the code work for both 32 and 64 bit. Something isn't quite working
right, if a breakpoint is hit the kernel will hang. Other than that
everything appears to work correctly.
The cookie is used to store the base address of the area that was just
visited. On 64-bit systems, int32 is not sufficient. Therefore, changed
to ssize_t which retains compatibility on x86 while expanding to a
sufficient size on x86_64.
Since the commpage is at a kernel address, changed 64-bit paging code
to match x86's behaviour of allowing user-accessible mappings to be
created in the kernel portion of the address space. This is also
required by some drivers.
Since this argument may be used to pass pointers, uint32 is not
correct for 64-bit. Effectively no change on 32-bit targets, both
size_t and uint32 are unsigned long there.
This has been done by adding typedefs in elf_common.h to the correct ELF
structures for the architecture, and changing all Elf32_* uses to those
types. I don't know whether image loading works as I cannot test it yet,
there may be some 64-bit safety issues around. However, symbol lookup for
the kernel is working correctly.
The actual implementation of the ELF loading methods have been put into
an ELFLoader template class that takes a single template parameter, which
is a structure containing all the necessary ELF typedefs. It's a bit
verbose, but I thought it was a neater solution than using a bunch of
standalone functions with a huge number of template parameters. There is
no change to code outside of elf.cpp, the ELF32/ELF64 differences are
handled internally.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
directory of a file without traversing leaf links (just like lstat()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42620 a95241bf-73f2-0310-859d-f6bbb57e9c96
address protection bits as well as the wiring flags for an arbitrary address
in a team's address space. Will be used in the debugger for the purposes
of the memory inspector/editor, in order to determine whether it can in fact
allow editing for the currently inspected address range.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42129 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
all reports so far have been positive. We fall back to legacy mode in the cases
where we can't figure out the correct routing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41527 a95241bf-73f2-0310-859d-f6bbb57e9c96
* move system_revision.h to headers/private/libroot
* unify libroot's get_system_revision() (the one I introduced recently) with kernel's
get_haiku_revision(), the function is now called get_haiku_revision() in the kernel
and __get_haiku_revision() in libroot
* system_revision.c is now being built as part of libroot and as part of the kernel
* adjusted all callers of get_system_revision() accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41516 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add private function get_system_revision() for accessing the
revision string
* adjust uname to use get_system_revision
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41479 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the length of the sHaikuRevision character array symbol needs to be set explicitly,
as using either _SYS_NAMELEN or sizeof(utsname::version) will only return the values
for the host, which may not match ours, thus potentially causing problems when using
sHaikuRevision
* add headers/private/system_revision.h which defines SYSTEM_REVISION_LENGTH to 128
* adjust definitions of sHaikuRevision in libroot and kernel accordingly
utsname::version is shorter than SYSTEM_REVISION_LENGTH, but that doesn't cause any harm
until we have indeed switched to a DVCS (in which case longer revision strings will be
cut off by 'uname').
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41421 a95241bf-73f2-0310-859d-f6bbb57e9c96
IO-APIC can be easily enabled to test it on various configurations. Note that
the previous default opt-out didn't work because the safemode options would not
be touched at all when not actually entering the boot menu.
Once IO-APIC is more broadly tested this can be removed again and the opt-out
option reenabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41370 a95241bf-73f2-0310-859d-f6bbb57e9c96
* inherit umask of calling process to images loaded via exec...()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40071 a95241bf-73f2-0310-859d-f6bbb57e9c96
only a few events can be watched (team creation/deletion/exec, thread creation/
deletion/name changes). The functions start_system_watching()/
stop_system_watching start/stop watching events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39862 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _kern_[sg]et_timezone() now accepts/passes out the timezone name, too
* adjust Time preflet and clockconfig to pass the timezone name into the kernel
when calling _kern_set_timezone()
* ajust implementation of tzset() to fetch the timezone name from the kernel
via _kern_get_timezone() instead of reading 'libroot_timezone_info'
* the Time preflet no longer writes 'libroot_timezone_info'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38164 a95241bf-73f2-0310-859d-f6bbb57e9c96
* dropped DaylightSavingTime from real_time_clock code in kernel, it was
never really being used for what it meant (and just being referred to by
gettimeofday(), which put a different meaning to it
* adjusted the syscalls get_timezone() & set_timezone() as well as their callers
accordingly
* got rid of get_rtc_info() and rtc_info struct in kernel, as it was only
being referred to by the FAT add-on and that one (like gettimeofday()) put a
different meaning to tz_minuteswest. Added a comment to FAT's util.c
showing a possible solution, should the hardcoded GMT timezone pose a problem.
* fixed declaration of gettimeofday() to match POSIX base specs, issue 7
* changed implementation of gettimeofday() to not bother trying to fill struct
timezone - it was using wrong values before, anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed syscalls _kern_[gs]et_tzfilename
to _kern_[gs]et_real_time_clock_is_gmt, as the filename part is no longer
relevant (and the two corresponding parameters were removed)
* C++-ified and reworked clockconfig to use the info from 'Time settings'
to setup the timezone info during boot
* removed invocation of _kern_get_tzfilename() from tzset(), as the syscall
no longer exists and tzset() is currently broken anyway
* adjusted the Time preflet to use the renamed syscall when getting/setting
the RTC info
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37881 a95241bf-73f2-0310-859d-f6bbb57e9c96
with only a single readable/writable/executable text+data segment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37415 a95241bf-73f2-0310-859d-f6bbb57e9c96
the constraint can be expressed more precisely. ATM B_32_BIT_FULL_LOCK is
implemented as B_32_BIT_CONTIGUOUS when B_HAIKU_PHYSICAL_BITS > 32, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37226 a95241bf-73f2-0310-859d-f6bbb57e9c96
item) and kernel settings option "4gb_memory_limit". Enabling either one
causes the memory beyond 4 GB to be ignored.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37225 a95241bf-73f2-0310-859d-f6bbb57e9c96
of consistency.
* Moved the B_OVERCOMMITTING_AREA flag from B_KERNEL_AREA_FLAGS to
B_USER_AREA_FLAGS, since we really allow it to be passed from userland.
* Most VM syscalls check the provided protection against B_USER_AREA_FLAGS
instead of B_USER_PROTECTION, now. This way they allow for
B_OVERCOMMITTING_AREA as well.
* _user_map_file(), _user_set_memory_protection(): Check the protection like
the other syscalls do and use fix_protection() instead of doing that
manually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36572 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a tiny bit more sophisticated version of
estimate_max_scheduling_latency() that uses a syscall that lets the scheduler
decide.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36170 a95241bf-73f2-0310-859d-f6bbb57e9c96
locks.
* Added syscalls for a new kind of mutex. A mutex consists only of an int32 and
doesn't require any kernel resources. So it's initialization cannot fail
(it consists only of setting the mutex value to 0). An uncontended lock or
unlock operation can basically consist of an atomic_*() in userland. The
syscalls (when the mutex is contended) are a bit more expensive than semaphore
operations, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36158 a95241bf-73f2-0310-859d-f6bbb57e9c96
use for the asm_offsets.cpp file, so it can be reused elsewhere.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34311 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented renameat(), faccessat(), fchownat(), fchmodat(), and mkfifoat().
* Added stub for mknodat().
* The kernel backend for faccessat() does not yet differentiate between
effective and real user/group IDs, though.
* Removed B_ENABLE_INCOMPLETE_POSIX_AT_SUPPORT, as we now support everything
(more or less). This also closes ticket #4928.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34288 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Therefore, all pthread functions should now work fine on all threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33967 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When DEBUG_SPINLOCK_LATENCIES is 1, the system will panic if any spinlock is
held longer than DEBUG_LATENCY micro seconds (currently 200). If your system
doesn't boot anymore, a new safemode setting can disable the panic.
* Besides some problems during boot when the MTRRs are set up, 200 usecs work
fine here if all debug output is turned off (the output stuff is definitely
problematic, though I don't have a good idea on how to improve upon it a lot).
* Renamed the formerly BeOS compatible safemode settings to look better; there
is no need to be compatible there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33953 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new header headers/private/system/disk_device_types.h, which defines
the <DiskDeviceTypes.h> constants as macros and which can be used where the
constants cannot be used. The constants are defined using the macros, so now
there's only one place where the string literals should be specified.
* Use the macros in the partitioning systems. I was too lazy to also adjust the
file systems -- most of them seem to hard-code the string literal yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33386 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add an __ARM_ARCH__ macro defined to the arch version to simplify checks for >= some version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32238 a95241bf-73f2-0310-859d-f6bbb57e9c96
each attribute access needed 3 syscalls, now only one as it should.
* Renamed the new Haiku call fs_open_attr() to fs_fopen_attr(), and added a new
function fs_open_attr() that takes a path (same semantics as the
fs_[f]open_attr_dir() functions already present in BeOS).
* Merged former _kern_open_attr(), and _kern_create_attr() into one syscall.
* Cleaned up vfs.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31881 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions.
* Since we now use UserStringParameter, this fixes the missing null termination
of the parameter string, and thus bug #4045.
* Removed UserMemoryParameter, as it's no longer in use.
* Adjusted syscalls accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31779 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
and added a _kern_unreserve_address_range() as well.
* The runtime loader now reserves the space needed for all its areas first
to make sure there is enough space left for all areas of a single image.
* This also fixes the final part of bug #4008.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31115 a95241bf-73f2-0310-859d-f6bbb57e9c96
the first part of making the runtime loader behave itself; it should already
make Clockwerk run okay with any number of translators (even if not all of
them will work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
versioning symbols, and private macro DEFINE_LIBROOT_KERNEL_SYMBOL_VERSION()
for symbols compiled into both libroot and kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30828 a95241bf-73f2-0310-859d-f6bbb57e9c96
C friendly it's not an actual base class, but casting to it is fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30503 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved scheduler listening interface to <listeners.h> and added more
convenient to use templatized notification functions.
- Added a listener mechanism for the wait objects (semaphores, condition
variables, mutex, rw_lock).
* system profiler:
- Hopefully fixed locking issues related to notifying the profiler thread
for good. We still had an inconsistent locking order, since the scheduler
notification callbacks are invoked with the thread lock held and have to
acquire the object lock then, while the other callbacks acquired the object
lock first and as a side effect of ConditionVariable::NotifyOne() acquired
the thread lock. Now we make sure the object lock is the innermost lock.
- Track the number of dropped events due to a full buffer.
_user_system_profiler_next_buffer() returns this count now.
- When scheduling profiling events are requested also listen to wait objects
and generate the respective profiling events. We send those events lazily
and cache the infos to avoid resending an event for the same wait object.
- When starting profiling we do now generate "thread scheduled" events for
the already running threads.
- _user_system_profiler_start(): Check whether the parameters pointer is a
userland address at all.
- The system_profiler_team_added event does now also contain the team's name.
* Added a sem_get_name_unsafe() returning a semaphore's name. It is "unsafe",
since the caller has to ensure that the semaphore exists and continues to
exist as long as the returned name is used.
* Adjusted the "profile" and "scheduling_recorder" according to the system
profiling changes. The latter prints the number of dropped events, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30345 a95241bf-73f2-0310-859d-f6bbb57e9c96
