was, thanks to the detailed instructions from Ingo, quite doable.
* Ported the (deprecated and now publically removed) notify_listener() calls
to the respective new notify_* calls.
* Fixed debug build.
* Added the FAT filesystem back to the image.
I only tested the filesystem briefly and everything seemed to work as expected
(mounted the FAT part of my bootable Haiku memory stick, opened a few files
and copied something to it). At least it should not be any more broken than
before the interface changes ;-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24987 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added virtual destructor to BRefFilter in case the GCC version is 3 or newer
(can't do it for GCC 2.95.3, since that would break binary compatibility
AFAIKT)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24986 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed BView::Alignment() to LayoutAlignment() which fixes a ton of warnings
and some conflicts with BControls.
* Added virtual destructor to BRefFilter in case the GCC version is 3 or newer
(can't do it for GCC 2.95.3, since that would break binary compatibility
AFAIKT)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24983 a95241bf-73f2-0310-859d-f6bbb57e9c96
1 second instead of half a second. Might help with slow BIOSes.
* Disable EHCI interrupts if the BIOS handover fails so that we do not flood
the system with interrupts if the BIOS later on decides to still comply with
our handover request.
* Add an unconditional success message to EHCI and UHCI to better see if
controllers are present/initialized correctly at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24980 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Updated code so Processor IDs for older processor do not have to be
modified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24979 a95241bf-73f2-0310-859d-f6bbb57e9c96
The stack calls for the moment hooks at starting and finishing and discovering each BT deviceNeeds still some polishing as some devices reply multiple times, and they should be filtered. And its nice to know the name after discovering not only the address.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24978 a95241bf-73f2-0310-859d-f6bbb57e9c96
not specified by the standard, but other systems set it as well in most
cases. We set it to real {g,u}uid now, if that changes. OpenSSH (sshd)
seems to be agreeable with that solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24974 a95241bf-73f2-0310-859d-f6bbb57e9c96
into the full thing, and will then be adapted to the kernel.
* Doesn't do a lot at this point - it can be built as a test app under BeOS
and Haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24973 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Haiku partitions are block devices.
* Unlike BeOS Haiku requires a size parameter to be passed to ioctl()
for B_GET_PARTITION_INFO.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24972 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fix Removal of specifil event wanted in a given request
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24971 a95241bf-73f2-0310-859d-f6bbb57e9c96
suites and the like, and moved the image jam code for PosixTestSuite
and libMicro there.
* Some cleanup (line length, use grist).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24970 a95241bf-73f2-0310-859d-f6bbb57e9c96
and then copy it in one go instead of copying individual files. Also use
a single temp file instead of one for every entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24968 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a whole lot of missing copyright statements, small corrections in
some existing ones.
Changes by myself:
* Fixed line breaks to honor 80 char limit.
* Removed unused function declaration to avoid warning.
* Small style fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24966 a95241bf-73f2-0310-859d-f6bbb57e9c96
in. We do not enable this interrupt and if we still "handle" it in our
interrupt handler we might prevent the interrupt from reaching the real intended
handler in a shared interrupt setup. Not sure if this could have happend at
all, but this is more correct in any case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24965 a95241bf-73f2-0310-859d-f6bbb57e9c96
and defines the macros needed by them.
* Renamed syscall sys_vm_map_file() to _kern_map_file() and changed the
path to an FD parameter. Changed vm_map_file() accordingly and
adjusted the kernel ELF loader and the runtime loader.
* Added syscall _kern_unmap_memory().
* Added bool unmapAddressRange parameter to vm_create_anonymous_area()
and map_backing_store(). If true and the address specification is
B_EXACT_ADDRESS, all areas in the specified address range will be
deleted (unless an area is covered only partially).
* Introduced B_SHARED_AREA flag, which is set on areas that have been
created by {vm,_user}_map_file() with REGION_NO_PRIVATE_MAP. When
fork()ing those areas won't be copied CoW, but rather be cloned. This
is needed for mmap() MAP_SHARED.
* {vm,_user}_map_file() also accept an FD argument < 0, in which case an
anonymous area is created.
* Implemented mmap() and munmap(). Currently there's the restriction
that we can't partially unmap areas. Otherwise the functions should be
rather compliant. We also support the non-POSIX extension
MAP_ANONYMOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24964 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled testing the checksum of the EDID info.
* Added a version check of the EDID info.
* Added more debug output.
* In the ModeList class, changes were made to how the refresh rate is
computed and used. Previously, some of the basic VESA modes were not
added to the mode list because the computed and specified refresh rates
did not exactly match. Now if the computed refresh rate is within 1.2%
of the specified rate, the mode is added. With this change, all basic
VESA modes selected by the EDID info are now added to the mode list.
* The "additional video modes" shown in the EDID dump are now added to
the mode list. Previously, this mode data was setup but not added to
the mode list. Code was also added here to set the vertical &
horizontal sync polarity according the EDID info. The sync polarities
are set according to a VESA document that I have.
* Fixed copy_str() warning, broken removal of trailing spaces, and null
termination.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24959 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Updated Intel processor IDs.
- Only take extended family/model into account on Intel processors.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24958 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legend.
* Added network receiving/sending DataSource.
* Now uses the new layout engine.
* Added support for per CPU DataSources, and added a per CPU CPU usage
DataSource.
* The DataSources can now be turned on and off via popup menu.
* You can now add more than one view to the window.
* The DataSources of the ActivityViews are now remembered.
* Now uses an offscreen bitmap to reduce flicker (it should now no longer
flicker with accelerated graphics).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24955 a95241bf-73f2-0310-859d-f6bbb57e9c96
constructor the object can be safely deleted (as documented for bug #1473)
* Some simplifications by caching the Pipe object for a transfer
* Minor cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24954 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered to have the constructor/destructor first.
* Two blanks between functions.
* Removed superfluous constructor calls.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24953 a95241bf-73f2-0310-859d-f6bbb57e9c96
indicating the name of the keymap. Correspondingly, modified input_server
to use the aforementioned variable in order to write the name attribute
to ~/config/Key_map. This allows Keymap prefs to correctly recognize the name
of the default keymap on a fresh build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24951 a95241bf-73f2-0310-859d-f6bbb57e9c96
address back to userland, even if the provided buffer was smaller. Fixes
a problem with Firefox, which is for some reason providing a buffer
smaller than our sockaddr_in.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24948 a95241bf-73f2-0310-859d-f6bbb57e9c96
handing them over to the USB stack. Otherwise the finisher (kernel) thread
would have no way to fill those packets when they came from a user space
address range. Completely untested though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24947 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Handles wrapping of the chunk buffer for the case that we need to read
additional chunk data, but still need the data from the last chunk
buffer as well.
* Don't skip the very first frame when calculating the timing.
* Includes some new code to handle seeking internally, but it is currently
disabled and incomplete.
* Prepared to recover from floating point exceptions generated in some rare
situations by xvid, but we are currently missing fenv.h in our public POSIX
headers, so it is disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24945 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed shutdown(). It was computing the wrong fifo flags and set the
wrong ones from the wrong variable on the peer fifo.
* Generally made the Unix sockets behave more like they should. E.g.
after closing one end, it must still be possible to read from the
other (as long as there are buffered data). Also fine-tuned when to
return what errors from recv()/send().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24943 a95241bf-73f2-0310-859d-f6bbb57e9c96
