NetBSD/sys/dev/ic
chuck 16ef494b41 bug fix:
- if aal5 frame has a CRC error then the length field in the aal5 trailer
	may not be valid, so we can not use it [and we must dump the frame]
	[Yuhang Sun <sunyh@dworkin.wustl.edu> & chuck@ccrc.wustl.edu]
1997-01-24 20:58:42 +00:00
..
ad1848reg.h
aic7xxx.c Fill in sc_link.max_target 1996-12-10 21:27:16 +00:00
aic7xxxreg.h dev/microcode/aic7xxx/aic7xxx.seq, 1996-10-08 03:04:02 +00:00
aic7xxxvar.h Implement a simple scsi xfer queue to avoid presenting a resource 1996-12-02 19:06:41 +00:00
aic6360.c Fill in sc_link.max_target 1996-12-10 21:27:16 +00:00
am7930.c Comply with recent autoconfiguration changes. Diffs graciously 1996-12-10 22:54:46 +00:00
am7930reg.h
am7930var.h
am7990.c Deal with Lance memory size 132KB (sparc `lebuffer' devices use this size). 1996-12-06 21:54:00 +00:00
am7990reg.h
am7990var.h fix alignment again for m68k 1997-01-15 18:22:35 +00:00
bha.c Remove a previous gratuitous change, and KNF police. 1997-01-17 22:09:09 +00:00
bhareg.h typo in definition of extended-geometry register. 1997-01-04 16:47:03 +00:00
bhavar.h Deal with targets > 7 on wide Buslogic controllers. Remember the "wide" 1996-12-20 21:35:10 +00:00
cd1400reg.h
com.c If attaching the console, reinitialize it immediately. 1996-12-14 10:46:38 +00:00
comreg.h
comvar.h move cominit() prototype to comvar.h, so that ports which use 'com' 1996-11-13 19:41:35 +00:00
cs4231reg.h
cy.c New bus.h implementation/interface: 1996-10-21 22:24:37 +00:00
cyreg.h
cyvar.h New bus.h implementation/interface: 1996-10-21 22:24:37 +00:00
dc21040reg.h Merge into mainline, tidy up some debug code. 1997-01-11 04:47:31 +00:00
dp8390reg.h
elink3.c Use DELAY() after doing a TX_RESET or RX_RESET command. 1996-12-31 21:36:30 +00:00
elink3reg.h * make sure 100mbit media-present bits don't collied with 3c509 1996-12-30 19:18:28 +00:00
elink3var.h * make sure 100mbit media-present bits don't collied with 3c509 1996-12-30 19:18:28 +00:00
hayespreg.h
i8042reg.h
i8237reg.h
i8253reg.h
i82586reg.h
i82595reg.h
ics2101reg.h
lpt.c update these so they compile whether or not __BROKEN_INDIRECT_CONFIG 1996-12-05 01:25:23 +00:00
lptreg.h Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports 1996-11-23 23:22:50 +00:00
lptvar.h update these so they compile whether or not __BROKEN_INDIRECT_CONFIG 1996-12-05 01:25:23 +00:00
mb86960.c Appease the compiler: get rid of some unused variables, add some 1996-10-17 04:34:08 +00:00
mb86960reg.h
mb86960var.h Appease the compiler: get rid of some unused variables, add some 1996-10-17 04:34:08 +00:00
mc146818reg.h
midway.c bug fix: 1997-01-24 20:58:42 +00:00
midwayreg.h New bus.h implementation/interface: 1996-10-21 22:24:37 +00:00
midwayvar.h New bus.h implementation/interface: 1996-10-21 22:24:37 +00:00
ncr5380.doc
ncr5380reg.h
ncr5380sbc.c Make this compile #ifdef DDB: 1996-12-15 10:02:30 +00:00
ncr5380var.h
nec765reg.h
ns16450reg.h
ns16550reg.h
pdq.c backout kprintf changes 1996-10-13 01:37:04 +00:00
pdq_ifsubr.c
pdqreg.h
pdqvar.h update alpha_XXX_dmamap() invocations to match prototype. 1996-10-25 21:33:30 +00:00
smc90cx6.c backout kprintf changes 1996-10-13 01:37:04 +00:00
smc90cx6reg.h
smc93cx6.c New bus.h implementation/interface: 1996-10-21 22:34:38 +00:00
smc93cx6var.h New bus.h implementation/interface: 1996-10-21 22:34:38 +00:00
uha.c Fill in sc_link.max_target 1996-12-10 21:27:16 +00:00
uhareg.h
uhavar.h New bus.h implementation/interface: 1996-10-21 22:34:38 +00:00
wdcreg.h
z8530.doc
z8530reg.h Add ZSWR1_IMASK (all intr. enable bits in WR1) 1996-12-13 21:02:39 +00:00
z8530sc.c New version of the z8530 driver that should permit the mac68k port 1996-12-17 20:42:40 +00:00
z8530sc.h New version of the z8530 driver that should permit the mac68k port 1996-12-17 20:42:40 +00:00
z8530tty.c New version of the z8530 driver that should permit the mac68k port 1996-12-17 20:42:40 +00:00