1fe20bbb39
be a bit more defensive in the probe routines. only allow one attachment.
2000-04-24 21:59:22 +00:00
d32950cb7e
Add cd9660 support to the secondary boot blocks.
2000-04-24 21:46:07 +00:00
b7de2c5900
Add lcgreg.h.
2000-04-24 17:09:56 +00:00
7964d80339
Initial definition of registers for VS400 LCG cards. Still needs more.
2000-04-24 17:09:03 +00:00
c6a9a48f2e
Add 4000/90 to the countdown hack.
2000-04-24 14:45:30 +00:00
62c210a97b
Fix bootblock countdown for 4000/VLC.
2000-04-24 07:03:27 +00:00
9148a41e81
fix booted_qe case to compare locators against controllers.
2000-04-23 20:30:37 +00:00
c10673838a
Extend asc driver to include support for the VS400/9x.
...
Add VS4000/9x support vsbus_dma.c
2000-04-23 16:38:52 +00:00
25d6f027de
Detect controller number on boot_qe check.
2000-04-22 21:40:40 +00:00
8b94e15772
Fix boot block countdown on 4000/60. Easy to add for other 4000 machines also.
2000-04-22 20:29:58 +00:00
a47bd10baa
Use RAISEIPL on all workstations.
2000-04-22 18:11:27 +00:00
3a90b3236e
Forgot a protection #define.
...
Make use of raise-spl.
2000-04-22 17:05:07 +00:00
8c7cf8f008
Add device switch entry for RL disks. Only uses rom to boot so far.
2000-04-22 16:52:23 +00:00
cab5a24c60
Recognize RL02 as boot device.
2000-04-22 16:50:44 +00:00
9b8f75bee1
Add "rl" disk.
2000-04-22 16:48:53 +00:00
cbf7514ca6
Detect "rl" as root device.
2000-04-22 16:43:47 +00:00
dd22df3dc8
Ops, forgot to commit this.
2000-04-22 08:19:49 +00:00
f52bc62c39
enable in-kernel NTP (so xntpd doesn't die).
2000-04-21 15:16:39 +00:00
73e5b4e878
Raise IPL after interrupt, for LANCE chip.
2000-04-20 18:55:50 +00:00
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
79a5b2164e
Remove autconf stuff. not needed and wrong.
2000-04-18 21:25:31 +00:00
414d3f059d
Compile -Os instead of -O2 (optimize for space).
2000-04-18 20:47:04 +00:00
d334fb3019
Handle NCR5394 SCSI as NCR5380. (Doesn't matter, it will use the ROM
...
routines anyway).
2000-04-18 20:25:13 +00:00
86d5f2d67d
Add RPB number for VS4000 SCSI.
2000-04-18 20:23:54 +00:00
a218b8543c
Enable cache on the 4000/VLC.
2000-04-18 16:28:04 +00:00
a90cf56cda
PC_ICR doesn't exist on the 4000/VLC and trying to read it apparently
...
causes problems when the cache is enabled. Don't access it if boardtype
is VAX_BTYP_48.
2000-04-18 16:25:59 +00:00
6c0d2ca981
Add some defines gleaned from OpenVMS to enable cache on the 4000/VLC.
2000-04-18 16:23:42 +00:00
a1413dca83
Fetch the SCSI ID out of NVRAM instead, if possible.
2000-04-17 20:36:23 +00:00
d37dfad561
DEC have the internal SCSI controller as ID6, and CDROM as ID7.
2000-04-17 16:30:40 +00:00
ee754e5548
Autoconf for SCSI stuff on VS4000s.
2000-04-16 16:03:42 +00:00
5fa416e77a
This should have never been checked in. it's what this directory is supposed
...
to make. opps.
2000-04-16 15:59:02 +00:00
637d2e3a82
Be a little bit more generous with TBIA.
2000-04-16 09:42:22 +00:00
7ad2b0ede3
Call doshutdownhooks().
2000-04-16 09:41:51 +00:00
92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
9434b7b19e
Add fix for VS4000 SCSI hangs on disk writes. Add a VAX_BUS_DMA_SPILLPAGE
...
and use it in the asc_vsbus driver.
2000-04-10 03:49:56 +00:00
8d2f5fd273
Fix TOY clock reading/writing on KA820.
2000-04-09 21:05:39 +00:00
9b917327ac
Add insqti/remqhi macros. These macros are interlock queue instructions
...
used in multiprocessor systems as well as in uniprocessor environments
with intelligent I/O devices.
2000-04-09 16:37:09 +00:00
2bc5adb20e
Instead of checking vm_physmem[<physseg>].pgs to determine if
...
uvm_page_init() has completed, add a boolean uvm.page_init_done,
and test against that. Use this same boolean (rather than
pmap_initialized) in pmap_growkernel() to determine if we are
being called via uvm_page_init() to grow the kernel address space.
This fixes a problem on some i386 configurations where pmap_init()
itself was needing to have the kernel page table grown, and since
pmap_initialized was not yet set to TRUE, pmap_growkernel() was
choosing the wrong code path.
Fix tested by Havard Eidnes.
2000-04-02 20:39:14 +00:00
78b105698a
Move dl* function definitions to libc on ELF.
...
Based on the patch supplied by Takuya Shiozaki <tshiozak@astec.co.jp>.
See http://mail-index.netbsd.org/tech-userlevel/2000/02/23/0000.html .
2000-04-02 15:35:47 +00:00
fe43e9f08f
Fix spelling error.
2000-03-31 18:40:58 +00:00
58714261cc
Remove register declarations.
2000-03-30 11:37:21 +00:00
2f1fef39b3
Centralise the declarations of cpu_model, machine, machine_arch,
...
osrelease, and ostype and remove "extern char foo[];" (for hostname
and domainname too).
Also delete redunctant decl of boottime in kern_info_43.c.
2000-03-28 23:57:24 +00:00
230876cf26
Merge parts of chs-ubc2 into the trunk:
...
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
2000-03-26 20:42:21 +00:00
aef1518cd8
Implement bi_intr_establish(). Add some fields about which CPU to interrupt.
2000-03-26 11:41:25 +00:00
dd359f65dd
Need some vectors and pointers to be set before IPL is lowered.
2000-03-26 11:40:31 +00:00
b81cd3fa6b
Identify ourselves.
2000-03-26 11:39:45 +00:00
9100212ef0
Add a "sc_rev" member to ncr5380_softc and handle CXD1180 quirk
...
in MI ncr5380sbc.
2000-03-25 15:27:54 +00:00
7b918b4088
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 06:40:33 +00:00
f9f885519d
First cut of multiprocessor support for vax. Still much to do before
...
other CPUs than the master can spin up.
2000-03-19 14:56:52 +00:00
cae5843a06
Fix typo that caused lance chip not to be detected.
2000-03-18 16:20:06 +00:00
0af581a1a1
Add a ncr5380_attach() routine which does part of the initialization, attaches
...
the scsibus, and does the addref/delref dance.
2000-03-18 16:13:22 +00:00
e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
162b0b1dab
__P(()) -> __P((void))
2000-03-16 23:21:05 +00:00
02905321b2
Foolish consistency. Mainly, always use underscores and sys/endian.h.
2000-03-16 15:09:34 +00:00
aa1de89bdf
explicitely #include <sys/systm.h> #if BUS_SPACE_DEBUG to get a printf()
...
prototype
2000-03-15 16:44:48 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
ebe08edbb2
add VS400 scsi attachment + a few other things
2000-03-09 02:05:07 +00:00
57032be837
disable scsi for ka49 until sgmap is adapted to it.
2000-03-09 02:02:12 +00:00
082a04f053
don't enable sgmap on ka49 yet.
2000-03-08 23:50:51 +00:00
f21e750db2
only have vmapbuf/vunmapbuf do anything on the ka46/48/49.
2000-03-08 23:49:10 +00:00
ad7dbd825c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:33:00 +00:00
ebbd936b2c
Chnage chip freq to 25MHZ. panic if dmaaddr is not in the kernel's
...
address space. fix some printfs. (reads now work!)
2000-03-07 00:08:42 +00:00
10f359a6b5
clear the sgmap that was allocated
2000-03-07 00:07:16 +00:00
e8c7c2f842
add real vmapbuf/vunmapbuf routines. needed for VS4000 SCSI support.
2000-03-07 00:05:59 +00:00
e42cc6e32e
remove some unsed variables. make a bit efficeint.
2000-03-07 00:04:13 +00:00
4ab785a0e1
it is pretty close to working. the scsibus probes now.
2000-03-05 23:20:25 +00:00
c43bdd0b91
Fix a bug with < 1 pages mappings.
2000-03-05 21:51:47 +00:00
1de30b727b
fix bug in bus_space_subregion
2000-03-05 21:22:48 +00:00
2b3b8b5d50
it's closer to working now.
2000-03-04 18:20:53 +00:00
ad61c16f86
Oopps. forgot to commit this.
2000-03-04 16:59:18 +00:00
8e7bc4bd01
Change some install options. From Todd Whitesel.
2000-03-04 16:21:05 +00:00
3c7a7bf0e0
Install the boot programs in /usr/mdec also. From Todd Whitesel.
2000-03-04 16:17:46 +00:00
e0df4ffcae
expunge vm_offset_t and vm_size_t.
...
add bus_dma support for the vs4000 dma translation map (sgmap).
enhance the vsbus for the lance to work with it.
remove the sgmap init code from ka46/48/49.c
2000-03-04 07:27:47 +00:00
7258e6c6b7
First pass at NCR53c9x attachment for VS4000. It doesn't work yet.
...
But I want to save the work.
2000-03-04 00:24:06 +00:00
1bce76807d
it's a bit cleaner now. it also gets rid of the iomap init in
...
ka4[689].c
2000-03-04 00:22:37 +00:00
2150f75fb0
First pass. need to add hw sgmap allocation via bus_dmamem
2000-03-03 22:57:49 +00:00
a1a05c5cf9
include <sys/cdefs.h> since <net/netisr_dispatch.h> needs __CONCAT
2000-03-01 00:17:17 +00:00
352a87f7bd
fix a too agressive s/CIA/UBA/ (e.g change SPEUBAL back to SPECIAL) in the
...
header.
2000-02-29 17:42:32 +00:00
8aaab5c387
add missing cpu dependencies
2000-02-29 17:13:27 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
fd8c03cf44
Allow arch-specific code to specify in4_cksum() like it can specify
...
in_cksum().
2000-02-14 21:42:50 +00:00
8e114c7994
Nuke unused variable.
2000-02-12 16:09:33 +00:00
918676c04f
Remove __BROKEN_CONFIG_UNIT_USAGE.
2000-02-12 16:00:13 +00:00
539689da9d
Remove another unneccessary reference to cf_unit.
2000-02-12 15:58:45 +00:00
c6471e4d9a
Remove an unneccessary reference to cf_unit.
2000-02-12 15:48:34 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
82464e46d6
Add a C99-style va_copy macro.
2000-02-03 16:16:06 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
f77befbc84
#define __HAVE_DEVICE_REGISTER on ports that have it, and check for
...
that, rather than a list of architecture defines, in config_attach
2000-02-01 04:01:19 +00:00
68e6de32b3
Add missing '#include "opt_vax630.h"' for custom kernels.
2000-01-27 17:06:55 +00:00
e7ea87d850
Adapt for matt's changes.
2000-01-27 16:58:44 +00:00
b0fbaa33fb
Remove obsoleted macros.
2000-01-26 09:44:10 +00:00
8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
4e90241d42
More files that were changed.
2000-01-24 02:54:01 +00:00
7b17d59536
Revamp the VAX interrupt handling code. Make it compatible with all the
...
other ports. Clean up some things.
2000-01-24 02:40:28 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
46b238cab4
remove volatile from softc. cleanup interrupt initialization.
2000-01-23 18:53:11 +00:00
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
5d5b2822ec
Don't need to include opt_vax8600.h. Always defined the 8600 specific bits.
2000-01-20 00:07:49 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
644b514c39
Change STRIPFLAGS=-g for cross-toolchains.
2000-01-19 14:44:58 +00:00
0b9af6bdce
check whether tv_usec >= 1000000
2000-01-19 02:52:16 +00:00
c4e802b942
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:52:21 +00:00
ca44eb8d21
iodone() -> biodone(), iowait() -> biowait()
2000-01-18 19:51:03 +00:00
d7e6de4a08
iodone() -> biodone()
2000-01-18 19:50:32 +00:00
9546ee5f87
defopt VAX750 side effect.
2000-01-17 04:57:31 +00:00
2665d4b7c6
defopt VAXnnn so the make depend does the right thing.
2000-01-17 04:55:25 +00:00
fa560ec3ee
Bogus context pointer sent to sigreturn() may crash the machine.
...
Bug found by der Mouse.
2000-01-16 12:43:52 +00:00
32bb54d2ff
Enable IBCS2 (DEC SVR3) compatibility.
2000-01-13 15:09:52 +00:00
b8701a20ac
Add ibcs2 signal tramp code.
2000-01-10 23:54:47 +00:00
cbe54e5057
Add ibcs2 machine dependent file for VAX.
2000-01-10 03:06:44 +00:00
a57402e015
Add VS4000 scsi attachment (does not yet work).
...
Add COMPAT_IBCS2 hook (for running DEC VAX SVR3 images).
2000-01-10 02:35:35 +00:00
362ae13bea
Add some machine dependent stuff for vax.
2000-01-10 02:33:13 +00:00
5dc0a61485
Add ibcs2_machdep.h and reformat so that adding new includes is a bit easier.
2000-01-10 02:30:33 +00:00
11e6c54cfc
C99: Define a NAN macro in <math.h> which evaulates to a constant expression of
...
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
1999-12-23 10:15:05 +00:00
ffbd2c2f5e
CL* discarding.
1999-12-12 14:39:18 +00:00
9beccd4e88
Detect "Infoserver 1000" also.
1999-12-11 17:55:13 +00:00
ae6ef93106
CL* discarding.
1999-12-11 17:54:04 +00:00
e921b99ca0
CL* discarding.
...
Move physmem setting to pmap_bootstrap().
Fix security problem in process_write_regs(), found by Klaus Klein.
1999-12-11 17:51:34 +00:00
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
351a7de621
Get symbol "NETISR_IPV6". This fixes PR#8790, but in a different way.
1999-11-19 22:09:55 +00:00
65e94f7ef4
close the i386 ibcs2 machdep.h; nothing really machine dependent in it yet.
1999-11-16 00:46:25 +00:00
8bec119fcc
Add commented out option SOFTDEP to all GENERIC kernels.
1999-11-15 19:10:44 +00:00
d116707af0
Add
...
prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix
to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".
1999-11-15 19:00:25 +00:00
d4c19a672a
adapt to jason new pmap_enter change
1999-11-13 21:32:25 +00:00
3891060822
Nuke TCP_COMPAT_42. Use sysctl to set it as needed instead.
1999-11-13 20:55:12 +00:00
1946167939
Update for pmap_enter() API change. No functional difference.
1999-11-13 00:30:26 +00:00
2334c8a315
Allocate memory for printouts directly instead of (trying to) use the
...
yes uninitialized VM system.
1999-10-27 16:40:47 +00:00
9318cd75a1
Let smg be probed as all other possible consoles.
1999-10-27 16:38:54 +00:00
4bec31640a
Avoid calling cninit() too early.
1999-10-27 16:37:54 +00:00
522cbf0248
Update to match new SVR4-style definition names in <sys/exec_elf.h>.
1999-10-25 13:55:06 +00:00
b8706b65a3
Detect SCSI as boot device.
1999-10-23 14:56:05 +00:00
362ef7b498
Use romread() routines if we are booted from SCSI disks.
1999-10-23 14:42:21 +00:00
08cf6bea89
Boot block code fixed to 1) understand SCSI disks and 2) read from a
...
ustar filesystem (used in installation).
1999-10-23 14:40:38 +00:00
16a09f9b9c
Remove the vmapbuf()/vunmapbuf() routines. They are quite unneccessary
...
on a machine that has MMU for its I/O devices.
1999-10-22 21:14:34 +00:00
db3857cbb6
DMA support for the NCR 5380-equipped vs3100's.
1999-10-22 21:12:20 +00:00
4021578d6e
Add routines to copy to/from a user process from/to the vsbus DMA area.
1999-10-22 21:10:12 +00:00
ae7e9d1571
Protect against multiple includes.
1999-10-21 20:01:36 +00:00
f1d4772434
Clear proc0 uarea, otherwise subsequent processes will inherit the
...
virtual timers and get unwanted signals. This has been around since
long time back...
1999-10-20 20:42:29 +00:00
7c80a2ddec
Nuke unnused file.
1999-09-21 18:08:37 +00:00
3455a353f9
Fix minphys() on vax. While here, convert to bus.h.
1999-09-21 18:07:54 +00:00
11cae42531
Centralize the declaration and clearing of `cold'.
1999-09-17 19:59:35 +00:00
3b01d1b872
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-15 18:10:33 +00:00
f3a668ed84
eliminate the PMAP_NEW option by making it required for all ports.
...
ports which previously had no support for PMAP_NEW now implement
the pmap_k* interfaces as wrappers around the non-k versions.
1999-09-12 01:16:55 +00:00
fe8a330be5
Styr upp deklarationen av clockchippsparametrarna.
1999-09-06 19:52:52 +00:00
56f0f92bef
Add some external variables.
1999-08-30 21:18:17 +00:00
a724cc71f4
Changes for 4000/90.
1999-08-27 20:05:08 +00:00
02470fb53a
Support for 4000/90.
1999-08-27 20:04:32 +00:00
3c8bd07cd4
CPU support for 4000/90 (KA49).
1999-08-27 20:02:05 +00:00
c1eb799c3a
Use interrupt stack for unexpected interrupts.
1999-08-27 20:00:24 +00:00
1e07ecc873
Aupport these on 4000/90.
1999-08-27 17:50:42 +00:00
4fa4cc8160
Don't try to search for these devices on 4000/90. badaddr() should
...
be fixed for this arch also.
1999-08-27 17:49:41 +00:00
73dc3cea57
Rearrange the interrupt detection code to work on the (slightly
...
different) VAXstation 4000/90.
1999-08-27 17:45:57 +00:00
86a3dd1701
Don't reference a unexisting address on 4000/90.
1999-08-23 19:10:43 +00:00
895fe9eaf6
Add support for 4000/90. Also handle interrupts more intelligent.
...
XXX - countdown doesn't work on 4000/90.
1999-08-23 19:09:27 +00:00
82d58cbe82
export elf_machdep.h
1999-08-21 23:35:44 +00:00
741f18b695
Initial VAX ELF32 support (mostly untested). It's checked primarily for
...
testing and archival for now. I don't expect anyone to work with it
since the binutils and gas changes are still pending. But you got to
crawl before you walk.
1999-08-21 19:26:18 +00:00
3c185af5fd
Include <sys/endian.h> after defining whether where are little- or
...
big-endian. i386, pc532 and vax still include <machine/byte_swap.h>
and define macros for the {n,h}to{h,n}*() functions. mips also
defines some endian-independent assembly-code aliases for unaligned
memory accesses.
1999-08-21 05:53:50 +00:00
06a92524c2
Include <sys/bswap.h> for function prototypes. i386, pc532 and vax
...
still include <machine/byte_swap.h> and define macros for some of
the bswap*() functions.
1999-08-21 05:39:51 +00:00
8a0eac0ab5
Detect NVAX also.
1999-08-19 20:50:18 +00:00
7638e3fbe3
Add boot support for the VAX 3300/3400 LANCE chip.
1999-08-14 19:41:14 +00:00
b906b753ad
Support for ibus-attached LANCE.
1999-08-14 18:44:00 +00:00
33baeca394
Search for LANCE.
1999-08-14 18:42:46 +00:00
9752aa250e
Support interrupt vector auto-detection on level-trigged devices also.
1999-08-14 18:42:17 +00:00
962bc94a90
Support for on-board LANCE on MicroVAX 3300/3400. Also use MI LANCE
...
code for VAXstations again; though not functioning correctly on all
types of machines. (Will fix that later).
1999-08-14 18:40:23 +00:00
6535fd2313
Erroneous checking of return value from bounds_check_with_label().
...
Massbus disks should work now.
1999-08-14 11:33:09 +00:00
eab2e881a5
Fix UBA IO space scan addresses; was searching at the wrong place.
1999-08-14 11:31:48 +00:00
650524ed75
Fix CMI probe bug on VAX 11/750. Prettify CPU printout.
1999-08-14 11:30:48 +00:00
33bc1af047
PGOFSET should be VAX_PGOFSET.
...
Remove two unused prototypes.
1999-08-12 20:23:49 +00:00
28fb7c1eb8
Define cpu_number() as discussed on tech-smp.
1999-08-10 21:08:05 +00:00
1008019f62
Detect "ze" as root device.
1999-08-08 16:33:13 +00:00
80c17df099
Give numeric machine checks, instead of incorrect strings.
1999-08-08 11:47:54 +00:00
2785184329
Tell if we get stray interrupts, if cold == 0.
1999-08-08 11:46:30 +00:00
f2e960f907
Add support for the SGEC.
1999-08-08 11:45:01 +00:00
3766555455
Reset the interface when loading is finished, to avoid spurious writing
...
to memory.
1999-08-07 18:30:36 +00:00
ae5dbfbe84
BI bus files has moved.
1999-08-07 11:19:04 +00:00
bc163ccc30
Clean up all bus handling stuff, it has become a mess the latest years.
...
Add a new bus; "ibus" that is the internal MicroVAX bus.
1999-08-07 10:36:43 +00:00
a7361f3acf
Moved to dz_ibus.c,v
1999-08-06 18:58:28 +00:00
c7d47daa04
Moved from dz_vsbus.c,v
1999-08-06 18:58:27 +00:00
d936f02b0b
Implement priority raising, and use it as appropriate.
1999-08-05 18:48:55 +00:00
37554502cf
Correct a comment.
1999-08-05 18:31:06 +00:00
eb20bbc780
Change the semantics of splsoftclock() to be like other spl*() functions,
...
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
1999-08-05 18:08:08 +00:00
128cc8e9b2
For now; don't include the devices that are not yet converted.
1999-08-04 19:15:56 +00:00
2661ddc378
smg/lkc must have "qfont".
1999-08-04 19:15:11 +00:00
bebf926694
Adopt to new BI bus design.
1999-08-04 19:11:01 +00:00
fe04287ec0
Moved to dev/bi.
1999-08-04 19:09:46 +00:00
0b6c232028
BI bus has become MI now.
1999-08-03 19:56:21 +00:00
matt