Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
133,200 Commits 606 Branches 0 Tags 3.1 GiB
fe6a35af59
Commit Graph

797 Commits

Author SHA1 Message Date
tron
824065dc0a Don't call "is_a1200()" again after its result was stored in the "softc" 
structure.
 2001-04-07 05:09:27 +00:00
tsutsui
7f28cbe9dc Fix an obvious typo. 2001-03-28 17:33:07 +00:00
is
0e72b76163 Missing changes to the last update, making this compile (and work) again. 2001-03-25 16:14:00 +00:00
martin
478c6ce6b9 Adjust to new hardware driver <-> isdn layer 2 and above sheme. 2001-03-24 12:45:15 +00:00
chs
ac3bc537bd eliminate the KERN_* error codes in favor of the traditional E* codes. 
the mapping is:

KERN_SUCCESS			0
KERN_INVALID_ADDRESS		EFAULT
KERN_PROTECTION_FAILURE		EACCES
KERN_NO_SPACE			ENOMEM
KERN_INVALID_ARGUMENT		EINVAL
KERN_FAILURE			various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE		ENOMEM
KERN_NOT_RECEIVER		<unused>
KERN_NO_ACCESS			<unused>
KERN_PAGES_LOCKED		<unused>
 2001-03-15 06:10:32 +00:00
is
782a7670e9 - The ioblix zbus board comes in 24 MHz and 22.1184 MHz clock variants. 
We default to the (newer, more sane) 22.1184 MHz value, but set it from
the iobzclock variable (in Hz), which is initialized from the IOBZCLOCK
configuration option and patchable.
XXX we should time the clock at system startup.
- add ioblix_zbus to the GENERIC configuration.
 2001-03-10 23:55:29 +00:00
is
6288edb5bd Add rcsid. 2001-03-08 19:21:53 +00:00
martin
f0d6660cf4 Filename cleanup: remove i4b_ prefixes outside sys/netisdn, last round. 
Renamed in sys/dev/ic:
i4b_hscx.c -> hscx.c
i4b_hscx.h -> hscx.h
i4b_ipac.h -> ipac.h
i4b_isac.c -> isac.c
i4b_isac.h -> isac.h
i4b_isic.c -> isic.c
i4b_isicbchan.c -> isic_bchan.c
i4b_isicl1.c -> isic_l1.c
i4b_isicl1.h -> isic_l1.h
i4b_isicl1fsm.c -> isic_l1fsm.c
 2001-02-20 22:24:31 +00:00
is
fcc944a0c5 Clean up messages, and replace nested ifs by switch statement. 2001-02-20 21:55:00 +00:00
is
dd234724b6 Print out IPL. 2001-02-14 21:05:31 +00:00
thorpej
043e519d55 Adjust the way that media is initialized on DP8390-compatible 
chips.  The dp8390_softc now has media_init and media_fini
function pointers that do the work.
 2001-02-12 18:49:03 +00:00
is
15d041fe54 Be a bit more helpful in the error case. 2001-02-11 09:54:48 +00:00
is
8b2795fa72 Support for BSC ISDN Master II. As far as we are concerned, this seems 
to be identical to the old model.
 2001-02-08 18:08:22 +00:00
is
92fd3fa589 Initial, still incomplete wscons support by Jukka Andberg, PR 11068 2001-02-02 21:52:11 +00:00
is
5d4912dc4b Add NetBSD rcsid, clean up comments. 2001-01-28 22:18:17 +00:00
is
f7aa87a4a5 Jens Schönfeld seems to recall the name is ISDN link. 2001-01-28 21:43:38 +00:00
is
facd2d0feb Support for the Zeus Development(?) ISDN board (2189/3). 2001-01-26 21:49:04 +00:00
is
3f25157bea Add support for ISDN Surfer (ISDN only, for the time being). 2001-01-25 22:22:15 +00:00
is
c1f1dff4bd Amiga part of isdn4bsd, and an example kernel configuration file. 2001-01-21 22:23:07 +00:00
aymeric
032ced3b65 Make these compile again, plus minor aesthetic changes. 2001-01-13 02:09:27 +00:00
aymeric
11dbbd8afe make this compile again 2001-01-13 02:08:15 +00:00
is
d1089630fa The name is X-surf, not X-serv. I'll never learn this. 
Thanks to Petri Koistinen for the correction.
 2000-12-29 22:39:29 +00:00
chs
c62d17a551 rationalize the use of b_flags for geteblk() buffers. 
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
 2000-11-20 08:24:08 +00:00
thorpej
b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
is
588900ab75 Remove some of the bitrot. 2000-11-08 21:50:25 +00:00
eeh
bc7363329c Adapt to new line discipline scheme. 2000-11-02 00:26:35 +00:00
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(), 
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
 2000-10-01 23:32:39 +00:00
aymeric
25365607f3 minor aesthetic changes, plus explicitly state this is public domain 2000-09-27 08:24:02 +00:00
is
ff3689f89c On AmigaPPC, the kernel directly maps the i/o range. 2000-09-20 19:05:53 +00:00
is
47d6ee388a Missing piece of PowerPC support. 2000-09-13 20:15:52 +00:00
thorpej
72a24b4eae Add an align argument to uvm_map() and some callers of that 
routine.  Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
 2000-09-13 15:00:15 +00:00
mhitch
4a320ca712 Use the correct DMA pointer for the second channel on 14-bit byte-swapped 
conversion.  Fixes NULL pointer reference crash when playing 16 bit little
endian audio.
 2000-09-03 02:04:53 +00:00
is
115bd3b350 Replace one callout handler by using a timeout in tsleep(). 
1.4.x version of it submitted by Ingolf Koch; translated to 1.5-ish by
myself.
 2000-08-27 10:35:43 +00:00
mrg
b564830503 remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h> 2000-06-29 08:44:03 +00:00
mrg
e185413725 remove redudant <vm/pmap.h> includes. <vm/pmap.h> -> <uvm/uvm_pmap.h> 2000-06-27 04:18:48 +00:00
mrg
89d0a3e519 remove redundant vm includes. 2000-06-26 14:38:50 +00:00
mrg
2f159a1bac remove/move more mach vm header files: 
<vm/pglist.h> -> <uvm/uvm_pglist.h>
	<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
	<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
	<vm/vm_object.h> -> nothing
	<vm/vm_pager.h> -> into <uvm/uvm_pager.h>

also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
 2000-06-26 14:20:25 +00:00
simonb
889c658b5b Change the kernel mmap interface so that the offset to map is an 
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes.  Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".

Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
 2000-06-26 04:55:19 +00:00
is
30cef4176a - auto-USE_C_BFOPS when !defined(__m68k__) 
- for bold characters, only blit the leftmost ftwidth pixels per character
  cell row. The rightmost row which used to be printed would have been
  overwritten formerly by the next character on sequential output, so no
  visible change will result most of the time.
  This fixes two problems:
  * USE_C_BFOPS (which only works for 8 pixel wide fonts) blits the same
    for bold characters now... it used to print the rightmost 8 pixel columns
    of the bold-smeared characters
  * we no longer need a reserved 1 pixel column at the right end of the screen.
    That is, a 640x400 screen will hold 80x50 charactes with the 8x8 font.
 2000-06-21 21:28:39 +00:00
tsutsui
8c4d1bf1f9 Adapt MI ncr53c9x changes. 2000-06-05 15:08:00 +00:00
is
f0d88bea57 Prepare for AmigaPPC. 2000-05-25 19:10:04 +00:00
is
da281d4321 Prepare for AmigaPPC. 2000-05-25 18:39:09 +00:00
is
ebc6483ef9 missed one line when converting m68k asm() to macro calls. 2000-05-24 19:36:29 +00:00
is
5e33ffef22 Initialize hardware for mouse mode at open time. 
This fixes MB2 and MB3 on the 2nd mouse port (the first is initialized by
the Amiga ROM at boot time).
 2000-05-18 19:58:30 +00:00
kleink
8050d5687d Restructure the ms(4) autoconfiguration code to attach as a single device 
instance and select a mouse port via the least significant bit of its
device minor number.  Fixes abuse of cf_unit in this driver.
 2000-05-18 15:39:22 +00:00
is
e6f57d38e4 Fix thinko in fix for fix for cf_unit abuse. 2000-04-27 21:11:07 +00:00
mhitch
437d090c28 Long term bug finally reared its head: size of device softc was specified 
as sizeof(struct device) when amiga switched to new config, and recent
additions of callout structures and a long missing struct device to the
soft structure resulted in kernel panics when attempting to open the builtin
serial port.  The callout structure initialization was clearing the serial
port softc data!  Fixed by using sizeof(struct par_softc).
 2000-04-23 19:55:51 +00:00
is
f0b2e9f184 Make this work again after the last changes... 
remember, folks, potential Amiga console devices run autoconfiguration
_twice_.
 2000-04-14 21:56:22 +00:00
aymeric
8e8e291c78 Prevent serial port from hanging when used as both console and terminal. 2000-04-07 19:47:18 +00:00
frueauf
440814a0b5 Add "struct device sc_dev;" to struct par_softc. 
Reviewed by Ignatios Souvatzis.
 2000-03-26 10:15:32 +00:00
is
128258c1a2 Initial IOBlix support. Only lpt and com; lpt untested; com assumes 24 MHz 
clock (needs autoprobe of clock speed).
 2000-03-23 22:44:42 +00:00
thorpej
b667a5a357 New callout mechanism with two major improvements over the old 
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.
 2000-03-23 06:30:07 +00:00
kleink
8bc084e1de Kill more broken cf_unit bogons. 2000-03-16 16:37:20 +00:00
kleink
1634305526 Kill a couple of unnecessary cf_unit (ab)uses. 2000-03-15 20:40:00 +00:00
soren
95054da1a1 Fix doubled 'the's in comments. 2000-03-13 23:52:25 +00:00
aymeric
77292e79c6 fix a couple of things to handle interrupts more cleanly on the A1200 2000-02-21 18:27:49 +00:00
aymeric
728c720d75 acknowledge the interrupt to gayle before entering wdc_intr. 
This fixes the lost interrupts problem.
fix some glitches on the A1200 too.
 2000-02-19 17:16:20 +00:00
is
9bf09631c6 Only output message on really special DEBUG kernels. 2000-02-11 19:09:56 +00:00
aymeric
dc0ce1249b fix interrupt handling 
I still get lost interrupts on the A1200, but the problem is certainly
elsewhere (not in wdc_amiga).
 2000-02-10 15:51:59 +00:00
aymeric
a10113c83a fix a couple of things to (hopefully) make this work on the A1200 2000-02-09 22:27:20 +00:00
thorpej
fe551f0e64 Fix a bug in disksort_*() which caused non-optimal ordering when multiple 
active partitions were on a single spindle.  Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
 2000-02-07 20:16:47 +00:00
mhitch
d9b42dd1fc At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not 
on an A1200 yet.  Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
 2000-02-05 18:46:28 +00:00
aymeric
d7e70f7068 sync with new bus.h 2000-01-23 21:06:12 +00:00
aymeric
9b5252590b add PCMCIA generic support 2000-01-23 20:57:27 +00:00
thorpej
52242fdf9f Update for sys/buf.h/disksort_*() changes. 2000-01-21 23:28:59 +00:00
thorpej
71b89434fa Remove one line of junk. 2000-01-18 19:33:31 +00:00
is
e80be24250 Yet another cpu.h. 2000-01-16 21:19:44 +00:00
aymeric
626fbe9b6d make this work again (include machine/cpu.h) 2000-01-15 17:09:47 +00:00
aymeric
b4406c3d63 make this compile again 2000-01-15 13:50:13 +00:00
is
fc0b743e44 Fix comment. No code change. 2000-01-06 10:53:34 +00:00
is
2e3d1cc048 The Ricoh chip has a seperate leapyear counter. 
We must write this when we write the year register, keeping them in sync.
XXX the chosen algorithm only works for 1901 <= year <= 2099.
 2000-01-03 21:52:14 +00:00
is
d14968078a Write part of the y2k fix. 
This is not strictly necessary, as
- at least for the Ricoh chip in the A3000 and A4000, as those chips' Y10
  registers happily continue to count up from 0xA if manually incremented
  past 0x9.
- the Amiga ROMs and "setclock" commands seem to interpret 0xA 0x? like
  200?, etc.

However,
- the Amiga setclock writes the modulo 10 value into the chips
- the chip docs of both chips, including the Y2K information of their
  manufacturers, only refer to the range 0-9
- the chips increment from 9 to 0

So we better conform to this, to avoid unpleasant surprises.
 2000-01-03 20:30:51 +00:00
is
5614cd4fce *sigh* 
Y2000-patch for A2000, A3000 and A4000 battery backed clock modules,
mostly by Adam Ciarcinski.
 2000-01-02 18:29:22 +00:00
is
715da299de assign the pointer 1999-12-31 08:38:13 +00:00
is
99943b2c6b Rewrite of the Amiga bus_space machinery to prepare for the support of 
the generic IDE driver and the PCMCIA slots.
 1999-12-30 20:56:44 +00:00
mhitch
2553fa2352 Add multicast capability to the A4066 (es) driver; now it will do IPv6. 1999-12-10 05:44:58 +00:00
mhitch
0e63301bc7 Check for valid device when starting a request with interrupts; device 
probes are now done with interrupts, and would hang when probing for
non-existent device.
 1999-12-10 05:39:20 +00:00
ragge
0513268399 CL* discarding. 1999-12-04 21:13:19 +00:00
is
14d940c179 Jens, not Joerg 1999-11-25 22:11:03 +00:00
is
5a05d40012 Address range scaling is hidden by the bus_space functions. Correct the 
definitions in case we ever do bus_space accounting on Amiga.
 1999-11-25 21:58:57 +00:00
is
366a09427a Add a few boards we know about. 
This should really be table-driven and optional.
 1999-11-25 21:57:45 +00:00
is
57ac5a3ea7 Another RTL8019 board: X-serve by Individual Computers Jens Schoenfeld. 1999-11-25 21:53:01 +00:00
is
13c27090e8 Don't call the sc->sbic_dmago() function if the data length is zero. 
This avoids a zero pointer dereference, which fixes PR 8571.
Make sbic_dmago() report selection timeouts to the upper layer.
This makes sbic really work again with 1.4L.
 1999-11-01 22:22:33 +00:00
is
21d10126ed Make this compile with -DDEBUG again. 1999-10-04 20:28:01 +00:00
thorpej
e6c88a7686 Update for SCSIPI changes. 1999-09-30 22:59:52 +00:00
is
744246fa0b vm_offset_t -> vaddr_t/paddr_t 1999-09-25 21:47:02 +00:00
is
6f84613972 replace inline asm by macro calls, that expand to the original inline asm 
or to C replacements depending on the USE_C_BFOPS option.
The C replacement only works for our 8 bit wide fonts.
 1999-09-20 23:17:13 +00:00
is
5c9f73a53d Oops. I forgot to add cachops here earlier. 1999-09-07 20:24:56 +00:00
is
33014f7bb0 Switch to cacheops. This closes PR 1960. 1999-09-06 21:50:47 +00:00
is
f0e0b02d7c Add a quick and dirty FBIOGVIDEO implementation. This is hardware independent, 
by saving the last written FIOSVIDEO/GRFIOCBLANK value into a shadow variable
in the grf_softc and returning this value on FBIOGVIDEO.
The presence of this ioctl is needed by screenblank(8) nowadays.
Original problem reported by Lars Hecking on the port-amiga mailing list.
 1999-08-16 19:55:27 +00:00
thorpej
eb20bbc780 Change the semantics of splsoftclock() to be like other spl*() functions, 
that is priority is rasied.  Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.

This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).

XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX.  This platforms still have this bug until their
XXX spl*() functions are fixed.
 1999-08-05 18:08:08 +00:00
is
a183cb63ae Fix horizontal timings for console mode (this helps, at least, 
Lars Hecking).
 1999-06-29 19:51:28 +00:00
is
f4351f7b96 Don't even try to output to, scroll or clear the device if we are in graphics 
mode. On this chip, we need to access some registers to set the text plane,
which messes up the graphics setup.
This should fix the grf3 problems reported by several people.
Michael Hitch and Joerg Lehners analyzed the problem and provided the fix.
 1999-06-27 21:17:17 +00:00
is
7a132d78b7 Align adresses better 1999-06-22 21:12:00 +00:00
is
b7ee76f1c4 Check for an unterminated bus; if yes: complain and don't try to use this 
bus. Without this, cbiiisc used to hang if nothing was connected.
Reported by Matthias Scheler. A similar method to avoid this was suggested
by Ralph Schmidt.
 1999-06-07 21:30:57 +00:00
is
92568502cc Don't dump all the registers at attach time. It works now. 1999-06-06 19:58:31 +00:00
thorpej
f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input() 
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
 1999-05-18 23:52:51 +00:00
is
05ae5bbfc1 Add HyperCom 3+/4+ parallel port support 1999-05-10 22:18:47 +00:00
mhitch
70d16931bd Correct the way I was using the transfer length for ATAPI commands. ATAPI ZIP 
drives are now usable.
 1999-04-17 19:49:24 +00:00
mhitch
46f5ce02e0 Do a REQUEST SENSE when ATAPI operation returns an error. This is needed to clear 
the Unit Attention status, i.e. after a media change on a CDROM.
 1999-04-17 17:08:12 +00:00
mhitch
bb2b8c8586 Change reading the ATAPI IDENTIFY data: a ZIP drive responds differently than my CDROM 
and will cause the drive to hang on boot.  The ZIP drive still does not work, but the
system no longer will hang,
 1999-04-16 03:29:49 +00:00
is
0d8a2e963a snchronize with reality. 
Actually, this should have been done months ago, but slipped the cracks.
 1999-04-01 20:31:02 +00:00
mhitch
94ac6e6084 Show 50ns period instead of 48ns for Ultra. 1999-04-01 17:27:22 +00:00
mhitch
f2edf64867 Turn off some ATAPI debugging output. 1999-04-01 16:22:57 +00:00
mhitch
11cfd11c52 Add CyberStorm MK III. 1999-03-31 02:47:38 +00:00
is
67caec5886 Dont write through a zero pointer (when in probe mode of a2kugettod()). 1999-03-28 21:39:59 +00:00
is
29abee115f Remove 20 lines of register dump from normal operation. 1999-03-28 21:09:54 +00:00
mhitch
d28c630840 I had to have been asleep when I changed Ignatios's constants to register symbols. 
Use the correct symbols for ODR full bits.
 1999-03-28 20:29:51 +00:00
is
e657b604f3 Add back the "810" id string. 1999-03-28 20:09:09 +00:00
is
c8c6cb17c3 Initialize all 16 elements. We're wide. 1999-03-28 19:39:24 +00:00
is
5ecbda755f The "Phase mismatch, REQ not asserted" error happens on one of my disks 
a few times a day. As the driver and system always recovers, when typing
a few c-ontinues, I think not entering the Debugger() won't hurt.
 1999-03-28 19:30:07 +00:00
mhitch
91d0eb55ed More 53c770 stuff: update 53c720/770 register defines and use them in 
siop2.c.  Add wide negotiation and Ultra support.  Modify siop.c to match
the siop2.c sync negotiation changes.  The CyberStorm MKIII driver now
supports 15 targets.  Remove some old table-driven sync rate stuff from
the original Zeus driver.
 1999-03-26 22:50:22 +00:00
mhitch
96eecff795 Add some ATAPI support. My CDROM drive works, but I don't have other devices to 
test.  This should provide interim ATAPI support until the MI wdc driver is used.
 1999-03-26 07:00:37 +00:00
is
d19d45b897 defopt Amiga graphics console options 1999-03-25 23:20:00 +00:00
is
f333be91dc defopt Amiga graphics console options 1999-03-25 23:19:58 +00:00
thorpej
0193701fcd Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them 
ourselves.  Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
 1999-03-25 23:10:53 +00:00
thorpej
962833e128 Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them 
ourselves.
 1999-03-25 23:10:13 +00:00
is
b30a4d19c0 Defopting grf_cc configuration parameters 1999-03-25 21:55:17 +00:00
is
35bbdd4cd2 AGA: VGAonly timing (GRF_AGA_VGA), by Adam Ciarcinski 1999-03-24 22:24:42 +00:00
mrg
d2397ac5f7 completely remove Mach VM support. all that is left is the all the 
header files as UVM still uses (most of) these.
 1999-03-24 05:50:49 +00:00
is
2ccf15e5f3 53c810A identification 1999-03-22 19:30:57 +00:00
is
605bbc6a31 ISDN Master II support added. 
Actually, support for this has still to be added to the isdn4bsd release.
 1999-03-17 21:44:18 +00:00
sommerfe
bc533621ed defopt MINIROOTSIZE 1999-03-17 18:59:21 +00:00
is
ba07737bc0 Use the 1/256s-resolution when reading the DraCo battery backed clock 1999-03-14 22:42:12 +00:00
veego
58d4f7ae24 Add support for future PicassoIV's which use an autoconfig space of 64MB. 
The framebuffer base address is then at a different offset.
The patch is from Klaus Burkert.
 1999-03-14 09:17:19 +00:00
is
bed6716015 Identify the chip type when attaching. 1999-03-13 22:43:30 +00:00
is
a02a989bcf The 53c720 and up are really different. For example, the method to determine, 
when disconnecting etc., how much data were transferred, has changed.
Symptom: SIOP invalid instructions when doing data transfers to disks that
disconnect.
XXX The bits etc. need to be defined correctly in the siopreg.h file, and
symbolic values used.
 1999-03-13 21:30:55 +00:00
is
48c33b2e56 Adjust to match the assembled code 1999-03-13 19:42:52 +00:00
is
d662e94812 fix some typos introduced when integrating the driver 1999-03-12 20:17:47 +00:00
is
5cbe57d881 Missing part of CS Mk. III changes 1999-03-09 20:31:34 +00:00
is
0fed7b2d06 The SCSI clock is 50 MHz for this board. 1999-03-09 20:25:46 +00:00
is
6505010dab Added very preliminary version of Symbios 53c7[27]0c driver and Cyberstorm 
Mk. III SCSI backend, by Michael Hitch.
XXX No wide transfers supported at the moment.
 1999-03-07 22:16:19 +00:00
is
946db35c9b Modifications to aucc.c for more input formats and 14bit stereo output. 
By Bernardo Innocenti, submitted as PR 6787.
Some KNF-ifying done by myself, so you might want to blame me instead
if the original patch worked for you.
	-is
 1999-03-04 20:45:01 +00:00
is
27fc050f1d Oops. 
Forgot to commit this LONG ago.
 1999-02-27 20:46:56 +00:00
is
2c7fa23c38 Fix Copyright dates 1999-02-16 23:34:10 +00:00
is
dc068e0d1f Assign my files to The NetBSD Foundation, Inc. 1999-02-16 22:46:55 +00:00
is
93a62a003d Wrong sign of dialout. 1999-01-31 10:30:22 +00:00
is
4d5a26ba82 Make this compile again. 1.5 was committed from the wrong directory. 
We apologize for any inconvenience caused.
 1999-01-10 19:19:57 +00:00
tron
560ed63047 Don't use void pointer for arithmetic. 1999-01-10 13:35:39 +00:00
tron
738cd778b3 Don't use void pointer for arithmetic. 1999-01-10 13:24:11 +00:00
tron
72a366c304 Don't use void pointer for arithmetic. 1999-01-10 13:22:05 +00:00
tron
a2885c9c15 Don't use void pointer for arithmetic. 1999-01-10 13:17:01 +00:00
tron
386665b0cb Don't use void pointer for arithmetic. 1999-01-10 12:56:25 +00:00
tron
4920c92937 Don't use void pointer for arithmetic. 1999-01-10 12:37:17 +00:00
is
bc72f5a29c Make it table-driven. Besides making adding more devices easier, the resulting 
code is 14% smaller (alas, for this file only).
 1998-12-26 22:22:58 +00:00
is
920aad33e4 Support for Hypercom 3+ / 4+. Untested yet, but its only some additional 
entries in a table.
 1998-12-14 20:33:45 +00:00
mjacob
74bc9f26d5 Update HBAs to incorporate the new max_lun property. 1998-12-05 19:43:33 +00:00
is
b36e0e66ff Fix typo. 1998-11-28 14:46:53 +00:00
thorpej
5f0577babc Adapt to the new scsipi_adapter interface. 1998-11-19 21:43:00 +00:00
mhitch
f6adcd4690 Some CyberStorm MK I SCSI modules use the same product ID as the Fastlane. 
Add a check for that product ID and not a Zorro III address.
 1998-11-14 21:48:22 +00:00
veego
17509cc037 Add the Ariadne II. 1998-11-11 22:28:32 +00:00
veego
1449b87b11 New driver for the Ariadne II. 1998-11-11 22:26:27 +00:00
frueauf
b1122614c3 Add braces to make egcs happy. 1998-11-05 14:13:59 +00:00
thorpej
29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from 
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
 1998-10-10 00:28:28 +00:00
tron
8362affa14 Add a few "nop" instructions to make the memory size probe more reliable. 1998-10-06 22:26:42 +00:00
is
95807e512a Garbage collect unused 3rd parameter to comprobe1(). 1998-09-16 21:30:58 +00:00
is
0eb25ce882 Add support for Apollo-68060-board-reworked A3000 motherboards. 
This is only tested on the original A3000...
 1998-09-04 22:00:27 +00:00
is
a99b5503f1 Account for the 68060 store buffer. 1998-09-04 21:19:07 +00:00
is
a3ee69c87a Split SMC chipset ARCnet driver into 
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
  using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
 1998-09-02 22:32:06 +00:00
mhitch
1d7e0301d3 Quick fix for TS_WOPEN -> t_wopen change. Compiles, but I can't verify 
that it actually works again.
 1998-09-01 02:33:32 +00:00
mhitch
b741e97082 Quick fix for TS_WOPEN -> t_wopen change. Compiles and works. 1998-09-01 02:30:29 +00:00
is
9948205c5a Prepare for support of Apollo-cpuboard-reworked A3000 mainboard SCSI. 1998-08-21 19:13:27 +00:00
augustss
cd09067eb4 * Redo the way the way the MIDI driver attaches to audio devices. 
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
  The opl driver is not finished yet; it sounds pretty awful.

For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
 1998-08-17 21:16:09 +00:00
mycroft
a1ac68819f Assign my copyrights to TNF. 1998-08-17 00:26:32 +00:00
mycroft
d07b3639a4 Assign my copyrights to TNF. 1998-08-15 17:47:15 +00:00
mycroft
6d3d8a1350 Make copyright notices with my name consistent. 1998-08-15 03:02:31 +00:00
is
f8dd65f3f5 Fix ommision in last backout. 1998-08-10 20:23:50 +00:00
is
c81476c89d ISDN Blaster / Master: ZBus attachment / SUPIO driver. 1998-08-10 18:53:31 +00:00
is
e5439fc15b Back out last change --- it doesn't work this way 1998-08-10 18:43:06 +00:00
is
878203d616 Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3". 1998-08-09 22:25:18 +00:00
is
98f1a01dec Actually probe the hardware. 
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
 1998-08-09 22:08:40 +00:00
is
8eebf1cfc5 yet more atomic operations accessing DraCo registers 1998-07-26 06:45:17 +00:00
is
0751419914 Back out previous change. It breaks Seyon in a non-obvious way. 1998-07-22 19:13:02 +00:00
drochner
49bb9d8214 adapt to LANCE driver split 1998-07-21 17:36:01 +00:00
is
6054d626f9 Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use 
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.

On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
 1998-07-18 21:27:25 +00:00
is
52ac5e203e Precompute lots of bitmasks etc. in serparam(). Results in slightly better 
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
 1998-07-18 20:19:33 +00:00
mhitch
dc9188e3e1 Add UVM support to amiga 1998-07-10 20:23:24 +00:00
is
49ed29ab05 The INTF_RBF bit of INTREQ is mirrored in SERDAT. As we would read this 
register anyway when the bit is set, we can safe one of the (slow) custom
chip accesses by using this bit.
Sounds ridiculous, but at a hardware FIFO depth of 1 and ~1 usec per
access (at IPL 5) it might help the highspeed addicts.
 1998-07-07 16:46:38 +00:00
jonathan
011f2bda08 defopt NS, NSIP. 1998-07-05 06:49:00 +00:00
jonathan
3751946b97 defopt INET, NETATALK. 1998-07-05 00:51:04 +00:00
jonathan
466e784ee1 defopt DDB. 1998-07-04 22:18:13 +00:00
mhitch
65346d4042 Add memory disk. 1998-07-03 22:24:45 +00:00
is
8a8208f978 Synchronize shadow ciab.pra variable on first open. 1998-06-29 19:31:19 +00:00
is
1bec8366fd Fix a problem with bogus hangups that Thorsten Frueauf has reported. 1998-06-26 17:50:20 +00:00
is
7a0f63f982 Back out the defopt for M680?0. As pointed out to me, this breaks ports which 
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
 1998-05-24 19:32:34 +00:00
is
6a6812fd92 Move M680[2346]0 to opt_m68kcpu.h. 
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
 1998-05-23 20:51:06 +00:00
veego
8a9498f09a Don't use an 'register char' as an array index, change it to an int. 1998-04-17 17:57:08 +00:00
veego
d15b06459b Add missing int after an register. 1998-04-17 17:38:14 +00:00
is
4e23fff56a Make ser.c compile again (preliminary release). It needs still a lot of 
cleanup, but at least mainstream usage should be possible again (worked
for me 5 minutes ago).
 1998-04-11 19:30:56 +00:00
is
da0b5bf913 amiga_ttyspl -> amiga_serialspl (and keep ttyspl constant at 4 again). 
(Part of this change slipped in with my last machdep commit; thanks to
Matthias Scheler for pointing this out).
 1998-04-11 18:28:33 +00:00
is
6c7f702633 - remove one level of soft interupt in the software autorepeat code 
- WOPEN -> wopen
 1998-03-25 22:14:13 +00:00
is
6e806b8115 This is no longer DraCo-specific (and hasn't been for a long time). 1998-03-22 17:16:33 +00:00
is
20251e62f9 Bug fix for the Ariadne panic: don't touch addresses outside the buffer we 
got passed.
- analysis by Charles Hannum
- bugfix by Michael van Elst
- test by Thorsten Frueauf & Matthias Scheler
 1998-03-09 17:00:33 +00:00
is
90e5d61467 Conditionally (on defined(DRACO)) compile new DraCo keyboard code sequences. 
Pointed out by Bernd Ernesti.
 1998-03-08 19:59:15 +00:00
is
eb3cda883b Probe for the native DraCo (rekeycaped MF-II) keyboard, instead of guessing 
it from the QuickLogic chip version byte.
If found, switch it to non-autorepeat mode (which seems to avoid the race
condition which made my keyboard driver / X server lose state under heavy
interupt load).
If not found, assume an Amiga keyboard on CIA-A.
XXX We should probe for the presence of the CIAs on the DraCo.
 1998-02-28 21:53:15 +00:00
is
85c6760e2d Initialize keyboard structures also from kbdopen(), if necessary. 
To do this, move the flag variable to kbdenable().
This will make kernels with serial console provice a working keyboard driver.
 1998-02-23 00:47:30 +00:00
thorpej
0b6e56ec02 Adjust for changes to config. 1998-01-12 10:39:01 +00:00
perry
b46484bb8a RCSID Police. 1998-01-05 20:51:25 +00:00
perry
589a5e2c79 patch from is -- I don't know what it does, but he says it's critical. 1997-12-20 21:13:13 +00:00
mhitch
c9d1ca0df4 delay() is using calculated timing, so correct the delay during polled 
SCSI wait to get a more accurate timeout.
 1997-11-27 22:43:44 +00:00