3ec1b99028
place the main chunk of POWEROFSEVEN's config into the .inc file, and have
...
the 32 and 64 files define MACHINE_ARCH, CC, LD and AS appropriately to build
a 32 or 64 bit kernel, respectively. this allows either to be built on a
system that can generate 32 or 64 bit code.
2001-09-02 05:53:38 +00:00
2102cef10c
Add an entry for level-15 interrupts.
2001-09-02 01:45:47 +00:00
87bb8014dc
Get rid of all simba references.
2001-09-02 01:18:56 +00:00
5f25c01eff
Comment out bridge pseudo devices from ports that don't
...
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.
2001-09-01 23:08:40 +00:00
97c67a9bae
Add bridge pseudo devices to GENERIC configs
2001-09-01 21:52:23 +00:00
8677b0ddf4
rearrange pmap_kenter_pa() to map unmanaged pages uncached as well.
...
this is apparently needed on the arc port.
slight optimization in pmap_kremove().
2001-09-01 17:08:19 +00:00
d3e7333a60
s/cpu_startup/sh3_startup/g in panic messages
2001-09-01 03:02:31 +00:00
c51e03edde
Move struct segmap declaration inside #ifndef _LOCORE to make locore.s
...
compilable again.
2001-08-31 18:06:13 +00:00
5783dd5873
instance-to-path works on instances not nodes.
2001-08-31 17:10:54 +00:00
ed373b780a
Change data segment size calculations so we don't need to resize if the
...
bootloader did it for us.
2001-08-31 16:47:41 +00:00
023bdd2bf2
Use comments around the token after a #endif.
2001-08-31 04:44:54 +00:00
e5b3cbb4cd
Use comments around the token after a #endif.
2001-08-31 04:18:52 +00:00
a6b8c86af0
Remove an unneeded comment; ``sync'' with other "just include <mips/foo.h>"
...
files.
2001-08-31 03:53:22 +00:00
4ac4da1c52
G/C the unused kernel-only CLK_TCK #define.
...
XXX: does include/time.h still need <machine/limits.h>?
2001-08-31 03:46:03 +00:00
84fb62aba0
Handle kernels with data+BSS segments larger than 4MB.
2001-08-30 23:00:19 +00:00
f2e3486b5b
Preliminary UltraSPARC III suport (not enabled yet).
2001-08-30 22:58:30 +00:00
04bdd02c1a
Make pmap_pte_insert STATIC so it will show up in DEBUG kernel with DDB
...
traces.
2001-08-30 22:06:44 +00:00
4a580ee45e
Make sure to restore SR 0 since returning from a syscall is actually
...
one way of doing a process context switch.
2001-08-30 22:00:48 +00:00
a140263932
Add new 7450 SPRs
2001-08-30 21:55:27 +00:00
50b056bc3a
Teach db_trace that some low addresses are ok to trace.
2001-08-30 21:44:58 +00:00
46f383bde2
Adjust printf format string for size_t change.
2001-08-30 17:16:02 +00:00
10516949e9
add some sun4/sun4c/sun4m compat code so we can build 32 bit kvm. (these files are not even vaguely syncable.)
2001-08-30 09:32:23 +00:00
89829e4825
defines for OPENPIC_ICR / serial mode.
2001-08-30 03:08:52 +00:00
0ea9d87eb1
Create an opt_openpic.h and add both OPENPIC and OPENPIC_SERIAL_MODE to it.
2001-08-30 03:08:22 +00:00
f05abdee3c
- Change default time frequency to 100MHz from 66MHz.
...
- Support the serial mode interrupts (with a kernel configuration option)
on the Sandpoint X3.
- Initialize cpu_timebase.
- Enable tulip driver.
2001-08-30 02:08:42 +00:00
e4892d7157
When invaliding single icache line on XScale, the branch target buffer
...
also needs to be invalidated. Also, but in the right sequence to empty
the pipeline on XScale.
2001-08-30 01:15:39 +00:00
352f878e45
Gah, fix a number of channel status/select bitfields.
2001-08-29 23:32:21 +00:00
4666070137
Correct a comment: The address of the signal handler is passed to the
...
sigcode trampoline in pv (t12), not a3, and has been since the
beginning of time.
2001-08-29 20:17:08 +00:00
c50646a1f3
Add adw
2001-08-29 17:37:47 +00:00
a0f0f74348
Print extra information on machine check (AS500, AS600).
2001-08-29 14:14:33 +00:00
ab8b3ce5d3
Remove descriotion about homegrown sonic driver from TODO list
...
since it has been replaced with the MI driver.
2001-08-28 15:17:47 +00:00
b14bf2ceef
Fix incorrect parentheses.
2001-08-28 14:51:28 +00:00
d46bbf4926
In the absense of any objection, move the rbus I/O range to 0x600-0x700
...
in the ARMADA config. On the M700 at least, the SMBus host controller lies
it 0x4000 (the beginning of the range allocated by default to rbus), and
stomping all over it causes bad things to happen.
2001-08-28 09:25:52 +00:00
df0327518e
Add evbarm, ibmnws, mvmw88k, m88k
2001-08-28 05:59:48 +00:00
dfbb14ad68
__syncicache needs to be exports to userspace as well as the kernel.
2001-08-28 03:03:43 +00:00
2879b54794
Enable some additional useful options like NFS_SERVER and RAID.
2001-08-28 02:43:49 +00:00
2d4d9f7fdc
Stop pci_configure_bus() from mapping PCI expansion ROMs. Fixes problems
...
with at least some sip (and possibly siop) cards on the walnut.
2001-08-28 01:35:06 +00:00
494454a87d
Comment out the hme driver; it's not totally MI yet.
2001-08-27 22:25:42 +00:00
b5937bf1d0
Add some missing network drivers.
2001-08-27 22:23:47 +00:00
228006bcc3
Add the driver for the LMC WAN adapter.
2001-08-27 18:52:09 +00:00
1676190cef
adjust the hack to build the SRT*.o files.
2001-08-27 13:07:03 +00:00
3b4f143fd8
- Correct a value of subend.
...
Pointed out by enami tsugutomo <enami@but-b.or.jp>.
2001-08-27 13:02:12 +00:00
0432180062
Add 7 new PHYs.
2001-08-27 12:08:00 +00:00
37fb92dcab
Remove unused entries from the pcb. This is with a long term view of merging the arm26 and arm32 pcb's.
2001-08-27 11:39:43 +00:00
31d98218e8
Add support for ALi M1543 in pcibios.
2001-08-27 08:21:20 +00:00
bbe2823aee
ANSIfy, KNF.
2001-08-27 06:18:08 +00:00
0667ea6c1c
text address is 0x90000, not 0x9000.
2001-08-27 04:53:27 +00:00
df657b5158
Count and record memory error interrupts with evcnt(9).
2001-08-27 02:00:16 +00:00
edc83ba7f4
Add xscale cpufuncs (using the sa110 ones when they are identical).
2001-08-27 00:00:27 +00:00
e8f317bba8
Add xscale cpu functions
2001-08-26 19:41:57 +00:00
mrg