f4c1a44b26
Use SIMPLEQ_FIRST/NEXT macros.
1998-06-05 03:02:31 +00:00
95f9f9f48d
In the function pcmcia_card_gettype:
...
- When there is only one pcmcia function, don't use first config
entry to determine card type. Instead, use the config entry
actually used to initialize the pcmcia function if it is already
initialized, else a card is memory-type.
- Don't put a space after cast.
- Use SIMPLEQ_FIRST/NEXT macro.
1998-06-05 02:51:17 +00:00
cf914cac00
oops, read CNFG on all Pyxis revs.
1998-06-05 02:15:38 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
3cfb38c5d1
Define the Pyxis interrupt request register.
1998-06-05 00:53:02 +00:00
3249813e11
For whatever reason, the firmware seems to enable PCI loopback mode if it
...
also enables BWX. Make sure it's enabled if we have an old, buggy firmware
rev.
1998-06-04 22:58:33 +00:00
d4d49905dd
Add support for using BWX for PCI config space and PCI i/o and mem space
...
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
1998-06-04 21:34:45 +00:00
573196b6ba
Check for the ether broadcast address in promiscuous mode (PR#5527).
1998-06-04 20:35:44 +00:00
57ce421691
Clean upp system detect code. Enable primary cache on VS3100.
1998-06-04 19:42:14 +00:00
616125f8d1
Deal with a hardware bug in Pass 1 and Pass 2 Pyxis chips. Basically,
...
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
1998-06-04 18:11:23 +00:00
c6d1832868
Include all the correct header files to get the prototypes of all the
...
soft net interrupt functions.
Handle NETISR_NATM soft interrupts.
1998-06-04 17:45:50 +00:00
61298c0cbf
Type postmortem_active as an int. (Pointed out by Patrick Welche).
1998-06-04 17:44:18 +00:00
78ebccfc2d
Rudimentary support for the VS3100 builtin graphics console.
1998-06-04 15:51:12 +00:00
e167016fdb
The service name of the rwhod(8) is not "rwho" but "who".
1998-06-04 13:31:40 +00:00
9a6e9b2ce7
some fixes & enhancements from openbsd's ftp, with extra fixes by me:
...
* default to passive with active fallback. $FTPMODE modifies this behaviour.
-A forces active connection.
* support '-o outfile' for auto-fetched files. outfile can be a file,
`-' (for stdout), or '|command' (to output each file through command).
* support '-r waittime', which retries the connection after waittime seconds
if it fails.
* fix 'page file' when restart is non-zero.
* try all ip-addresses of a host in a http fetch (as the normal ftp fetch
does).
XXX: a ``broken pipe'' error sometimes occurs with -o '|command';
i haven't tracked this down yet.
1998-06-04 08:28:35 +00:00
98d557d09e
No need to define WDDEBUG or undefine ATAPI_DEBUG_WDC here.
1998-06-04 02:46:24 +00:00
770c4bfb9d
Make this compile with WDDEBUG
1998-06-04 02:27:33 +00:00
df385821f4
Print newline like others do when tracing wdunlock.
1998-06-04 02:25:05 +00:00
a51d42503c
Export the spill page PTE, and provide a hook to initialize it early.
1998-06-04 01:22:52 +00:00
6dc28f5445
CIA and Pyxis have 8 scatter/gather TLB entries.
1998-06-04 01:18:22 +00:00
32fef69ef7
Define the CIA control register.
1998-06-04 01:04:11 +00:00
d94f02f9fd
Ok, now we _REALLY_ have Pyxis recognition correct. There are two systypes
...
that can have Pyxis: EB164 (AlphaPC164LX and AlphaPC164SX) and DEC_550 (Miata),
and these systypes/variations _always_ have Pyxis.
1998-06-03 23:16:55 +00:00
44605ba506
Define a bunch more system variations.
1998-06-03 23:07:38 +00:00
062294cc8c
Magma parallel port ioctls per Iain Hibbert.
1998-06-03 22:40:00 +00:00
87fe4d9ea1
Update from Iain on the parallel port stuff.
1998-06-03 22:38:31 +00:00
15c52040a5
Define the ALT_MEM big in the CIA revision register.
1998-06-03 22:19:08 +00:00
503358cd49
Use MAP_FAILED in the return values description.
1998-06-03 22:03:44 +00:00
f8acb6d6fa
Sync w/ i386 port:
...
Eliminate some needless indirection through ISA DMA front-end functions.
1998-06-03 21:55:26 +00:00
e39ca9bf6f
Define MAP_FAILED, a symbolic constant which evaluates to the value returned
...
by mmap(2) upon failure.
1998-06-03 21:52:40 +00:00
52450409d6
Sync w/ i386 port:
...
Implement bounce buffers for mbufs.
Also, correct copyright snafus, and a forgot-o left over from a commit
I made yesterday.
1998-06-03 21:52:36 +00:00
6d29690288
Implement bounce buffers for mbufs.
1998-06-03 21:50:48 +00:00
23a5420f99
turn on Essential HIPPI for this configuration
1998-06-03 21:17:52 +00:00
9f5797ac1d
turn on Essential HIPPI for these configurations
1998-06-03 21:16:28 +00:00
d6041754c2
Allow the DMA tag to specify a boundary contraint. If the device has a
...
more strict boundary, the map will use it, otherwise the map will inherit
the tag's, unless the tag's constraint is 0 (no boundary constraint).
1998-06-03 18:25:53 +00:00
063efa8267
Add the ability to work with HTTP-1.1-style virtual hosts, using the
...
HTTP/1.0 backwards compatible "Host:" field method.
1998-06-03 15:50:34 +00:00
7ccec6ac9f
Show/log the strerror(errno) string when getcwd fails
1998-06-03 13:21:42 +00:00
554cce1e94
Remove double "options GATEWAY" entry.
1998-06-03 10:03:25 +00:00
dde092b47d
Fix some problems with failed getcwd commands, reported in PR bin/5531
...
by Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1998-06-03 09:21:45 +00:00
28486ff301
Remove the _cookie member of the DMA tag; it's not used by anything. (This
...
was already done to the i386 port.)
1998-06-03 06:47:41 +00:00
7b37a276e2
Sync w/ i386 port:
...
Optimize the ISA DMA map load somewhat; don't traverse the buffer twice.
Instead, just attempt to do a normal load first. If we exceed the bounce
threshold or the number of segments, then we bounce the transfer.
1998-06-03 06:43:04 +00:00
6ffa35b390
Sync w/ i386 port:
...
When loading a DMA map, if the page's physical address exceeds the bounce
threshold, return an error to the caller (the caller will attempt to
bounce the transfer).
1998-06-03 06:41:51 +00:00
b5c2ecc231
Sync w/ i386 port:
...
Add a `bounce threshold' to the i386 DMA tag.
1998-06-03 06:40:45 +00:00
051c391187
Optimize the ISA DMA map load somewhat; don't traverse the buffer twice.
...
Instead, just attempt to do a normal load first. If we exceed the bounce
threshold or the number of segments, then we bounce the transfer.
1998-06-03 06:37:54 +00:00
66f9322f5f
EISA and PCI do not require bouncing; specify a bounce threshold of 0.
1998-06-03 06:35:49 +00:00
7b2ef456f0
When loading a DMA map, if the page's physical address exceeds the bounce
...
threshold, return an error to the caller (the caller will attempt to
bounce the transfer).
1998-06-03 06:35:04 +00:00
f018f866d7
Add a `bounce threshold' to the i386 DMA tag.
1998-06-03 06:33:02 +00:00
0b25bb43b3
Adjust bus_dmamap_sync() for the R4000; in that case, use the stashed
...
virtual address for the segment, rather than the physical address, and
adjust the cache call appropriately.
1998-06-03 05:10:23 +00:00
63be85fc62
Fill in the virtual address of each DMA segment as we load the map.
1998-06-03 04:41:30 +00:00
691e8af708
Add a "virtual address" private member to the pmax bus_dma_segment_t, for
...
use in R4000 cache flush operations in bus_dmamap_sync().
1998-06-03 04:38:41 +00:00
8ed096c794
Panic if we can't fulfill a bus_dmamap_load() with a boundary constraint.
1998-06-03 04:35:42 +00:00
enami