an overflow occurs.
. Make this error a fatal build time error
. Move the support for dbsym into the MI Makefile.kern.inc,
conditional upon the SYMTAB_SPACE option being defined in
the kernel config file.
- rather than embedding bufq_state in driver softc,
have a pointer to the former.
- move bufq related functions from kern/subr_disk.c to kern/subr_bufq.c.
- rename method to strategy for consistency.
- move some definitions which don't need to be exposed to the rest of kernel
from sys/bufq.h to sys/bufq_impl.h.
(is it better to move it to kern/ or somewhere?)
- fix some obvious breakage in dev/qbus/ts.c. (not tested)
- Remove all NFS related stuff from file system specific code.
- Drop the vfs_checkexp hook and generalize it in the new nfs_check_export
function, thus removing redundancy from all file systems.
- Move all NFS export-related stuff from kern/vfs_subr.c to the new
file sys/nfs/nfs_export.c. The former was becoming large and its code
is always compiled, regardless of the build options. Using the latter,
the code is only compiled in when NFSSERVER is enabled. While doing this,
also make some functions in nfs_subs.c conditional to NFSSERVER.
- Add a new command in nfssvc(2), called NFSSVC_SETEXPORTSLIST, that takes a
path and a set of export entries. At the moment it can only clear the
exports list or append entries, one by one, but it is done in a way that
allows setting the whole set of entries atomically in the future (see the
comment in mountd_set_exports_list or in doc/TODO).
- Change mountd(8) to use the nfssvc(2) system call instead of mount(2) so
that it becomes file system agnostic. In fact, all this whole thing was
done to remove a 'XXX' block from this utility!
- Change the mount*, newfs and fsck* userland utilities to not deal with NFS
exports initialization; done internally by the kernel when initializing
the NFS support for each file system.
- Implement an interface for VFS (called VFS hooks) so that several kernel
subsystems can run arbitrary code upon receipt of specific VFS events.
At the moment, this only provides support for unmount and is used to
destroy NFS exports lists from the file systems being unmounted, though it
has room for extension.
Thanks go to yamt@, chs@, thorpej@, wrstuden@ and others for their comments
and advice in the development of this patch.
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.
The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.
Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.
OK'ed by my project mentor, William Studenmund (wrstuden@).
system-specific values. Submitted by Chris Demetriou in Nov 1995 (!)
in PR kern/1781, modified only slighly by me.
This is enabled on a per-mount basis with the MNT_MAGICLINKS mount
flag. It can be enabled at mountroot() time by building the kernel
with the ROOTFS_MAGICLINKS option.
The following magic strings are supported by the implementation:
@machine value of MACHINE for the system
@machine_arch value of MACHINE_ARCH for the system
@hostname the system host name, as set with sethostname()
@domainname the system domain name, as set with setdomainname()
@kernel_ident the kernel config file name
@osrelease the releaes number of the OS
@ostype the name of the OS (always "NetBSD" for NetBSD)
Example usage:
mkdir /arch/i386/bin
mkdir /arch/sparc/bin
ln -s /arch/@machine_arch/bin /bin
Support for a.out coredumps is now conditional on EXEC_AOUT, EXEC_COFF,
EXEC_ECOFF, or EXEC_MACHO, or LKM. Since coredump_netbsd is the only user
of cpu_coredump, make that conditional too. Lastly, add 'no options EXEC_AOUT'
so the EXEC_AOUT option in std.i386 can be overridden.
-Wreturn-type -Wwrite-strings -Wswitch" so I am turning them on. There
is going to be a little lossage on some platforms but you can always
compile with "make DEFWARNINGS=no". Tested on sparc64 and i386.
* We now use hash tables instead of a list to store the in kernel
fingerprints.
* Fingerprint methods handling has been made more flexible, it is now
even simpler to add new methods.
* the loader no longer passes in magic numbers representing the
fingerprint method so veriexecctl is not longer kernel specific.
* fingerprint methods can be tailored out using options in the kernel
config file.
* more fingerprint methods added - rmd160, sha256/384/512
* veriexecctl can now report the fingerprint methods supported by the
running kernel.
* regularised the naming of some portions of veriexec.
attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1
register to set the pitch of the bell. It was necessary to separate them
in order to have a working ACPI attachment (as the two appear as different
devices in the ACPI structures).
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
NAME
tap - virtual Ethernet device
SYNOPSIS
pseudo-device tap
DESCRIPTION
The tap driver allows the creation and use of virtual Ethernet devices.
Those interfaces appear just as any real Ethernet NIC to the kernel, but
can also be accessed by userland through a character device node in order
to read frames being sent by the system or to inject frames.
In that respect it is very similar to what tun(4) provides, but the added
Ethernet layer allows easy integration with machine emulators or virtual
Ethernet networks through the use of bridge(4) with tunneling.
``Qui tacet consentire videtur.''
disklabels nested inside an MBR "NetBSD" or "386BSD" partition (first
one found is considered authoritative for the disk), or in one of several
known locations for various NetBSD platforms. It can read native or other-
endian disklabels (code is there, but not tested).
If you want to play with this, exercise caution; you can't currently
mountroot on a wedge (setroot() needs some work). Enabled by the
DKWEDGE_METHOD_BSDLABEL kernel option.
infrastructure that allows new ones to be added. The discovery methods
are prioritized, and only one can exist at a given priority.
The DKWEDGE_METHOD_GPT option causes GPT support to be included. GPT is
at priority 0; we prefer GPT above all others.
calls to ensure that the vnode lock state is as expected when the VOP
call is made. Modify vnode_if.src to set the expected state according
to the documenting lock table for each VOP. Modify vnode_if.sh to emit
the checks.
Notes:
- The checks are only performed if the vnode has the VLOCKSWORK bit
set. Some file systems (e.g. specfs) don't even bother with vnode
locks, so of course the checks will fail.
- We can't actually run with VNODE_LOCKDEBUG because there are so many
vnode locking problems, not the least of which is the "use SHARED for
VOP_READ()" issue, which screws things up for the entire call chain.
Inspired by similar changes in OpenBSD, but implemented differently.
produces corrupted binaries when the link_set_* sections extend into another
page after the end of the .text section by using a generated an ldscript that
puts all the link_set_* data into the .text section in the first place.
- pfsync (due to protocol # assignment issues)
- carp (not really a PF portion, but thought important to mention)
- PF and ALTQ are mutually-exclusive. this will be sorted out when
kjc@csl.sony.co.jp updates ALTQ and PF (and API inbetween)
reviewed by matt, christos, perry
torture-test is very welcomed.
to only call pckbc_machdep_cnattach() if this is present. This allows
pckbc_machdep_cnattach() to be omitted entirely on most ports, where it only
returns ENXIO anyway.
The devices with this attribute at the moment are pc(4) on i386 and bebox, and
pckbc on sparc, where pckbc_machdep_cnattach() mysteriously returns 0 rather
than ENXIO.
PR#23470, with minor updates by me. This is only the syscall support
from that PR, for now.
Changes: port over fix from FreeBSD for multicast address generation.
Changed bcopy to memcpy. For now, #ifdef notyet the portions of
kern_uuid.c that are meant to be used by (currently nonexistent) other
things in the kernel. Added syscall to COMPAT_FREEBSD as well, though
that's currently not useful, as any program new enough to use this call
also uses other syscalls we don't (yet) emulate.
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
systems that don't have a dedicated feeper. It's up to MD code to enable
this by having the "audiobell" attribute and calling audiobell() at the
appropriate moment.
Code for making noise in the kernel from Richard Earnshaw. Simple synthesizer
design from the RISC OS Programmer's Reference manual.
clients, and a pseudo-device for userspace access.
The attribute is named `opencrypto'. The pseudo-device is renamed to
"crypto", which has a dependency on "opencrypto". The sys/conf/majors
entry and pseudo-device attach entrypoint are updated to match the
new pseudo-device name.
Fast IPsec (sys/netipsec/files.ipsec) now lists a dependency on the
"opencrypto" attribute. Drivers for crypto accelerators (ubsec,
hifn775x) also pull in opencrypto, as providers of opencrypto transforms.
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.
This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes). It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms. Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.
On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
Uses a hook in spec_strategy() to save data written from a mounted
file system to its block device and a hook in dounmount().
Not enabled by default in any kernel config.
Approved by: Frank van der Linden <fvdl@netbsd.org>
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
Gcc-3.3 produces valid warnings in most cases and uncovers bugs. In the
cases where a variable is known to be initialized, we initialize it and
add: /* XXX: gcc */. If a $MACHINE_ARCH's compiler is busted, it can add
-Wno-uninitialized in the MD Makefile.
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
interface controllers (of varying intelligence levels).
Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford,
with some modification by me.
code is derived from Sam Leffler's FreeBSD port of OCF, which is in
turn a port of Angelos Keromytis's OpenBSD work.
Credit to Sam and Angelos, any blame for the NetBSD port to me.
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
the environment:
CPUFLAGS Additional flags to the compiler/assembler to select
CPU instruction set options, CPU tuning options, etc.
Since CPUFLAGS is not implicitly set by any part of the make infrastructure,
it is safe to set in mk.conf, unlike COPTS or DBG.
Back out the following chagne:
http://mail-index.netbsd.org/source-changes/2003/05/08/0068.html
There were some side-effects that I didn't anticipate, and fixing them
is proving to be more difficult than I thought, do just eject for now.
Maybe one day we can look at this again.
Fixes PR kern/21517.
space is advertised to UVM by making virtual_avail and virtual_end
first-class exported variables by UVM. Machine-dependent code is
responsible for initializing them before main() is called. Anything
that steals KVA must adjust these variables accordingly.
This reduces the number of instances of this info from 3 to 1, and
simplifies the pmap(9) interface by removing the pmap_virtual_space()
function call, and removing two arguments from pmap_steal_memory().
This also eliminates some kludges such as having to burn kernel_map
entries on space used by the kernel and stolen KVA.
This also eliminates use of VM_{MIN,MAX}_KERNEL_ADDRESS from MI code,
this giving MD code greater flexibility over the bounds of the managed
kernel virtual address space if a given port's specific platforms can
vary in this regard (this is especially true of the evb* ports).
adapters. Currently supports:
* LSI 53c1030 Ultra320 SCSI
* LSI FC909, FC909A, FC919, and FC929 Fibre Channel
Ported from the FreeBSD "mpt" driver, written by Greg Ansley. Thanks
to Frank van der Linden for testing and some bug finding.
This work was sponsored by Wasabi Systems, Inc.
This "oosiop" driver was originally written by Shuichiro URATA
for arc port, and then it was modified by me to make it work
also on hp700.
This driver has been tested on my NEC Express5800/240 with 53c700-66
for several months, and also tested on HP9000 735/125 with 53c700
(though current hp700 port has been broken since SA merge).
Both sync transfer and disconnect/reselect work fine,
but tagged queuing is not implemented yet.
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
means that the dynamic linker gets mapped in at the top of available
user virtual memory (typically just below the stack), shared libraries
get mapped downwards from that point, and calls to mmap() that don't
specify a preferred address will get mapped in below those.
This means that the heap and the mmap()ed allocations will grow
towards each other, allowing one or the other to grow larger than
before. Previously, the heap was limited to MAXDSIZ by the placement
of the dynamic linker (and the process's rlimits) and the space
available to mmap was hobbled by this reservation.
This is currently only enabled via an *option* for the i386 platform
(though other platforms are expected to follow). Add "options
USE_TOPDOWN_VM" to your kernel config file, rerun config, and rebuild
your kernel to take advantage of this.
Note that the pmap_prefer() interface has not yet been modified to
play nicely with this, so those platforms require a bit more work
(most notably the sparc) before they can use this new memory
arrangement.
This change also introduces a VM_DEFAULT_ADDRESS() macro that picks
the appropriate default address based on the size of the allocation or
the size of the process's text segment accordingly. Several drivers
and the SYSV SHM address assignment were changed to use this instead
of each one picking their own "default".
g/c options SMB and opt_smb.h
rename the pseudo device to nsmb, and use needs-flag instead needs-count,
adjust nsmbattach() appropriately
replace SMB_CHECKMINOR() with explicit code in smb_dev.c, to improve readability
(there are still some details to work out) but expect that to go
away soon. To support these basic changes (creation of lfs_putpages,
lfs_gop_write, mods to lfs_balloc) several other changes were made, to
wit:
* Create a writer daemon kernel thread whose purpose is to handle page
writes for the pagedaemon, but which also takes over some of the
functions of lfs_check(). This thread is started the first time an
LFS is mounted.
* Add a "flags" parameter to GOP_SIZE. Current values are
GOP_SIZE_READ, meaning that the call should return the size of the
in-core version of the file, and GOP_SIZE_WRITE, meaning that it
should return the on-disk size. One of GOP_SIZE_READ or
GOP_SIZE_WRITE must be specified.
* Instead of using malloc(...M_WAITOK) for everything, reserve enough
resources to get by and use malloc(...M_NOWAIT), using the reserves if
necessary. Use the pool subsystem for structures small enough that
this is feasible. This also obsoletes LFS_THROTTLE.
And a few that are not strictly necessary:
* Moves the LFS inode extensions off onto a separately allocated
structure; getting closer to LFS as an LKM. "Welcome to 1.6O."
* Unified GOP_ALLOC between FFS and LFS.
* Update LFS copyright headers to correct values.
* Actually cast to unsigned in lfs_shellsort, like the comment says.
* Keep track of which segments were empty before the previous
checkpoint; any segments that pass two checkpoints both dirty and
empty can be summarily cleaned. Do this. Right now lfs_segclean
still works, but this should be turned into an effectless
compatibility syscall.
kernel config option) that controls whether the kernel dumps to the
dump device on panic. Dumps can still be forced via the ``sync''
command from ddb. Defaults to ``on''.
done by Artur Grabowski and Thomas Nordin for OpenBSD, which is more
efficient in several ways than the callwheel implementation that it is
replacing. It has been adapted to our pre-existing callout API, and
also provides the slightly more efficient (and much more intuitive)
API (adapted to the callout_*() naming scheme) that the OpenBSD version
provides.
Among other things, this shaves a bunch of cycles off rescheduling-in-
the-future a callout which is already scheduled, which the common case
for TCP timers (notably REXMT and KEEP).
The API has been simplified a bit, as well. The (very confusing to
a good many people) "ACTIVE" state for callouts has gone away. There
is now only "PENDING" (scheduled to fire in the future) and "EXPIRED"
(has fired, and the function called).
Kernel version bump not done; we'll ride the 1.6N bump that happened
with the malloc(9) change.
to use generic VGA driver(s):
- Allow VGA drivers to use wsfont instead of builtin font.
- Add vga_reset() function, which will be called from MD consinit(),
to put VGA into text mode. This function is enabled by options VGA_RESET.
isochronous reception routine for IEEE 1394 OHCI (fwohci). The
transmission part is under construction.
The minimum configuration options for this feature are:
# IEEE 1394 (i.LINK)
fwohci* at pci? dev ? function ?
pseudo-device fwiso 1
for config_time.h) that contains, for example:
/* Sun Nov 17 05:37:51 2002 GMT */
#define CONFIG_TIME 1037511471
#define CONFIG_YEAR 2002
#define CONFIG_MONTH 11
#define CONFIG_DATE 17
#define CONFIG_HOUR 5
#define CONFIG_MINS 37
#define CONFIG_SECS 51
These values represent the current time as of when config was last
run, so that functions (eg, inittodr()) can use these values instead
of being updated once every year or so with the "current" time.
The associated modification to Makefile.kern.inc makes config_time.h
depend on this depend on this and the kernel Makefile, so that
granularity of kernel builds is not reduced.
dbj