This "oosiop" driver was originally written by Shuichiro URATA
for arc port, and then it was modified by me to make it work
also on hp700.
This driver has been tested on my NEC Express5800/240 with 53c700-66
for several months, and also tested on HP9000 735/125 with 53c700
(though current hp700 port has been broken since SA merge).
Both sync transfer and disconnect/reselect work fine,
but tagged queuing is not implemented yet.
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
<kml@patheticgeek.net>.
This patch does NOT add monitor mode support for the Lucent radios.
awi(4) was only modified for compatibility with the new mediaopt.
It does NOT support monitor mode.
Tested by Kevin, Daniel Carosone, and I.
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it. (XXX hme probably should use it but I can't
test that).
in mii_readreg()/mii_writereg(). Also restore this bit based on the
currently selected media instance every time we need to reinitialise
the interface.
so handle it properly by an additional quirk flag in sc_flags.
The problem was reported by Pat Wendorf on port-dreamcast, and
the fix was suggested and confirmed by Christian Groessler.
malloc types into a structure, a pointer to which is passed around,
instead of an int constant. Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
to use generic VGA driver(s):
- Allow VGA drivers to use wsfont instead of builtin font.
- Add vga_reset() function, which will be called from MD consinit(),
to put VGA into text mode. This function is enabled by options VGA_RESET.
Such RAID controllers are actually just IDE controllers with a BIOS that
can create RAID volumes and write the configuration info to config blocks
on the disks. The BIOS can do I/O to these volumes, and the OS must
understand the config blocks and implement RAID in software in order to be
able to use these volumes.
Only SPAN (simple concatenation) and RAID0 are supported at this time,
and writing back config blocks is also not supported at this time. Currently,
only the Promise configuration scheme is supported, although supporting
the Highpoint scheme should not be too difficult.
In any case, this is sufficient to use the Promise RAID0 volume (thus
preserving the win2k AS installation) on this new Intel server I have.
Thanks to Soren Schmidt for doing the work in FreeBSD; it made this
task much easier. The config block parsing code is adapted from his
work.
