* Make "make all" update the .build_done timestamp more intelligently;
if no files changed in the build tree, don't touch the timestamp.
(This allows UPDATE and BUILD to function correctly.)
into the mmap'd region. (reviewed by thorpej.)
This is done to facilitate use as a host tool on not-necessarily-NetBSD
host systems. Specifically, it works around problems discovered on
linux (mostly tested on 2.4.2-smp / RH 7.1, but also seen on other
variants) in which mmap(...MAP_SHARED...) on NFS files doesn't work
properly:
74 [hardy] RAMDISK.EB % uname -a
Linux hardy 2.4.2-2smp #1 SMP Sun Apr 8 20:21:34 EDT 2001 i686 unknown
75 [hardy] RAMDISK.EB % cat /etc/issue
Red Hat Linux release 7.1 (Seawolf)
Kernel 2.4.2-2smp on a 2-processor i686
76 [hardy] RAMDISK.EB % df .
Filesystem 1k-blocks Used Available Use% Mounted on
fs:/home/cgd
104857600 98764968 6092632 95% /home/cgd
77 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:41 PST 2001
a1f35f085f130983892933df92d23be4 netbsd
78 [hardy] RAMDISK.EB % nbmdsetimage netbsd ~/proj-local/rd
79 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:49 PST 2001
740cbfb0a8432b7d3a6bf3421655e270 netbsd
80 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:51 PST 2001
a8c60aae879ead6893f074e83c23d70a netbsd
81 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:54 PST 2001
a8c60aae879ead6893f074e83c23d70a netbsd
82 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:55 PST 2001
a1f35f085f130983892933df92d23be4 netbsd
83 [hardy] RAMDISK.EB % date ; md5sum netbsd
Thu Dec 27 17:31:57 PST 2001
a1f35f085f130983892933df92d23be4 netbsd
84 [hardy] RAMDISK.EB %
("isn't that cool?")
for DEC-based chips, and to have tlp available for tulip clones. The change
in GENERIC is such that TLP_MATCH options are commented out (allowing de to
attach to DEC-based chips), and change in is INSTALL such that de is present
and TLP_MATCH options are commented out.
The addition of de in INSTALL increases its compressed size by about 17 KB.
Primarily the goal is to have INSTALL and GENERIC use the same device.
This will fix PR port-macppc/10779.
It has been tested with the 1.5.3_ALPHA GENERIC and INSTALL kernels on my
PowerMacintosh 7300 with a 21140A (now de, previously tlp) and a
Lite-On 82C115 (tlp).
de0 at pci0 dev 15 function 0
de0: interrupting at irq 25
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a4:03:35
de0: enabling 10baseT port
tlp0 at pci0 dev 14 function 0: Lite-On 82C115 Ethernet, pass 2.5
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:00:94:b6:16:ef
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
models of type sizes that we currently support, and include
the appropriate one in each arch's targparam.h.
* Use the type size constants provided by targparam.h in the
type table, rather than using "sizeof(type) * CHAR_BIT" (which
would get the host's type size, not the target's). XXX Not
yet done for floating point types.
* Add a new BITFIELDTYPE lint comment that suppresses illegal
bitfield type errors if the type is an integer type (e.g.
long, long long), and also suppresses non-portable bitfield
type warnings.
macppc/hardware
Forgot to put PowerComputing PowerCenter in list of models that can't use
on-board video
macppc/prep
Reword four-key-combo c-o-O-F to imply you need to hold all four down
until the 0 > prompt appears, also a better description of the keys
shuffle System Disk instructions around a little to make more sense
Fix BootVars instruction to "uncheck auto-boot?"
Change '.Dl 0 \*> Ic "..."' to '.No 0 \*> Ic "..."' surrounded by .(disp
Link to new FAQ entries (such as how to use the Open Firmware environment
and instruction for people unfamiliar with MacOS)
Describe how to prepare an MS-DOS filesystem for booting
Be more consistent about "ISO9660"
The NetBSD/macppc boot CD-R image has "partition zero" bootloader and
XCOFF bootloader to work on all models -- this is described better now
Better info on how to netboot OF 1.0.5 systems
Mention that UFS is not currently supported by NetBSD and MacOS < 10
Detab the dhcpd.conf example
Add .To 2 tags for preparation of bootable media subsections
macppc/install
Change '.Dl 0 \*> Ic "..."' to '.No 0 \*> Ic "..."' surrounded by .(disp
Added new and very very useful "Open Firmware boot syntax" section
describing how to determine the OF boot-device and boot-file
Clean up examples of boot commands
Update descriptions of booting problems (some were incorrect)
Add .To 2 tags for OF boot command subsections and common problems
tweaks to the "Quick install for the impatient", particularly changing the
recommendation to MS-DOS floppy with bootloader and kernel instead of
boot floppy image
common/sysinst
add .To 2 tags for macppc-specific sections
common/postinstall
change tlp0 to de0 in description of typical ethernet interface
export the label we use for that purpose, otherwise, that smart gas will
change it to a relative jump, which does basically nothing.
I can finally boot NetBSD/amiga ELF. (Yippee!)
While there, test if we are a 68851 before we invalidate the TLB,
instead of doing it between the TLB flush and the data cache flush.
