Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
119,457 Commits 606 Branches 0 Tags 3.1 GiB
ef51dc08fc
Commit Graph

15916 Commits

Author SHA1 Message Date
mycroft
ef51dc08fc NULL -> 0 2003-10-23 23:52:16 +00:00
mycroft
56e88d0d24 NULL -> 0 2003-10-23 23:25:39 +00:00
fvdl
d85a7f8656 Need the NOCRC bit, or my 5704B5 will start acting up. 2003-10-23 20:36:36 +00:00
bouyer
e0f02bb281 If we found a compat channel disabled, unmap the registers. There may be 
an ISA IDE adapter at the same address.
 2003-10-23 19:29:35 +00:00
fvdl
4df6c69646 * match more cards (from FreeBSD) 
* don't set the NOCRC bit in the mode control register, it can cause
  problems on some chips (from the broadcom errata via FreeBSD)
* implement a fallback quirktable that is searched only using the
  major asic revision, so that the driver has a shot at supporting
  newer versions properly without modification
* rename asicrev -> chipid, like the FreeBSD driver
 2003-10-23 17:41:59 +00:00
kent
5286b24afb Change the short names of nForce: 
nForce-MCP -> nForce
 nForce-MCP-T -> nForce2
 nForce-MCP-T -> nForce3

Use snprintf() and strlcpy() instead of sprintf() and strcpy().
 2003-10-23 17:14:54 +00:00
kent
3afd3b3671 - remove unused code 
- print diagnostic messages if the primary codec does not get ready in
auich_reset_codec().
 2003-10-23 17:05:26 +00:00
fvdl
142de57c80 Regen. 2003-10-23 16:02:09 +00:00
fvdl
ef2ab367bd Add a few more broadcom 57xx ids. From FreeBSD. 2003-10-23 15:54:13 +00:00
fvdl
b4c1912d80 * match the nForce3 controller 
* search the whole current PCI bus for the VIA bridge, can't rely on
  it to be function 0 of the same device
 2003-10-23 14:27:09 +00:00
ragge
c4690aa593 Set snd queue size to max(WM_IFQUEUELEN, IFQ_MAXLEN), instead of hard to 
WM_IFQUEUELEN.
 2003-10-23 12:53:02 +00:00
kent
27d4af4355 No need to check the codec ready flag in read_codec() and write_codec(). 
According to the ICH datasheets, the flag is unchanged unless resetting
the codec.

The flag is useless after enabling bus mastering.  This behavior is common
to all ICH chips.  The quirk handling code is removed.
 2003-10-23 05:25:29 +00:00
briggs
8cfe8cd526 After discussion between mycroft and enami, restore the WDC_PCMCIA_ATTACH 
flag and use it to avoid an extra power cycle during the probe process.
 2003-10-23 03:56:36 +00:00
briggs
193b74f006 Regenerate for ENE Cardbus product IDs. 2003-10-23 00:47:45 +00:00
briggs
cdb1c2e5bf Add some ENE Cardbus bridges from FreeBSD. 2003-10-23 00:46:56 +00:00
uwe
6a7a7e91e7 Add missing newline at the end of an error message. 2003-10-23 00:22:55 +00:00
briggs
3448998b43 Try to deal better with card removal during the card enabling process. 2003-10-23 00:04:03 +00:00
briggs
7dc8540d52 Avoid a race condition that could allow a removable controller (such as 
a compact flash card) to lock the atabus thread if it gets detached during
the probe process.
 2003-10-22 23:59:00 +00:00
augustss
f42962a2c2 Add Dvorak keyboard map. From PR kern/23230, jacereda@tractor.act.uji.es. 2003-10-22 17:24:43 +00:00
manu
8beb6e32ae Patch from http://mail-index.netbsd.org/current-users/2003/09/04/0018.html 
to fix problems with a sound card
 2003-10-22 15:57:33 +00:00
thorpej
0f781c4abb Add support for the SPI EEPROM found on the newer i82541 and i82547 
chips.  Add the i82541 and i82547 product IDs to the table, #if 0'd
out, for now (there are still more changes to come for these new chips
to work properly).
 2003-10-22 15:50:39 +00:00
briggs
0fd0bfe35a enami noted that my last fix was not correct. Simplify the code some (and 
make it more correct) by removing a flag to track wdc attachment.  Disable
the function after wdcattach() is called, and remove a conditional when
enabling the function in wdc_pcmcia_enable().
 2003-10-22 15:03:04 +00:00
fvdl
91371415b1 Match the Promise FastTrak 378. 2003-10-22 11:32:40 +00:00
fvdl
ba07312903 Match the nForce3 AC-97 chip. 2003-10-22 11:32:12 +00:00
fvdl
653fb67506 Regen. 2003-10-22 11:31:18 +00:00
fvdl
5b7cf69d6e Add: 
* an id for the Promise FastTrak 378
	* several ids for NVidia nForce3 devices
 2003-10-22 11:30:52 +00:00
mjl
e959b27d7f Typo in comment. From OpenBSD. 2003-10-22 09:04:39 +00:00
mjl
088da88a56 Typos in comments. From OpenBSD. 2003-10-22 09:02:49 +00:00
agc
df214f1879 Don't use NULL when an integer is needed. 2003-10-22 08:58:38 +00:00
briggs
1e810e3178 Since we enable the pcmcia function on attach, disable it on the detach. 2003-10-22 07:48:25 +00:00
briggs
40823fb6bb Maintain reference count properly for nested enables/disables. 2003-10-22 07:46:48 +00:00
augustss
6d60d8ab89 Re-add the quirks that force certain In-System Design adapters to appear 
as (non-standard) ATA over BBB adapters.  Without these quirks they are
not regocnized by the umass driver.
 2003-10-22 05:38:16 +00:00
mycroft
98fb62de25 Add a code that appeared in a PR recently. 2003-10-22 00:35:41 +00:00
christos
55222ec4a6 Regen 2003-10-22 00:18:32 +00:00
christos
c1ce37728d Remove backslash for new gawk 2003-10-22 00:17:39 +00:00
christos
ddccf85c50 support for NE2000_TYPE_AX88790 from 
Yong-Jhen Hong yongjhen at alqualonde dot org
 2003-10-22 00:12:36 +00:00
tsutsui
680fc37c3b Remove declarations of constab[] and *cn_tab. They are in <dev/cons.h>. 2003-10-21 17:03:52 +00:00
thorpej
3e560e2b48 Add a TODO list item. 2003-10-21 16:52:08 +00:00
thorpej
c50f2ac573 - Move the i82540EM (LOM) along with the other i82540 product IDs. 
- Match the i82545GM (1000BASE-T and 1000BASE-X) and i82546GB
  (1000BASE-T and 1000BASE-X) product IDs.
 2003-10-21 16:51:17 +00:00
thorpej
a866babe44 If we're on PCI-X, look up the PCI-X capability. Verify that the 
max memory read byte count in the command register is <= the max designed
memory read byte count in the status register.  If not, reset it to the
status register's value.  This is necessary because some BIOSes configure
the wrong value, and the wrong value confused some versions of the PCI-X
capable chips.
 2003-10-21 16:41:51 +00:00
thorpej
fa32a2cf94 - Since we access PCI config space as 32-bit words, redefine the PCI-X 
command register bits offset and shifted appropriatly (PCI-X command
  makes up the upper 16 bits of the register that holds the PCI-X cap ID
  and next-cap-pointer).
- Define shift counts for max memory read byte count in the command
  and status registers.
 2003-10-21 16:22:48 +00:00
tsutsui
281b9dfec6 vaddr_t is not pointer, so don't compare it against NULL. 2003-10-21 16:17:18 +00:00
simonb
45cf1137ea Remove break after return. 2003-10-21 06:22:46 +00:00
simonb
7feb1a91fa Remove return after panic(). 2003-10-21 06:22:16 +00:00
thorpej
abc7f80ca5 - Map I/O space on chips that support it. While it is not used for 
normal operation, it is required to implement a bug work-around on
  some chips.
- When issuing a reset on the i82544, i82540, i82545, i82546,
  and i82541, use I/O space, if available, to work around a problem
  with the memory write cycle (problem only occurs when issuing
  a reset).
 2003-10-21 05:45:11 +00:00
thorpej
f44ddf324f Fix a typo. 2003-10-21 05:07:10 +00:00
thorpej
0143773bbc Add some additional register definitions needed for newer chips: 
- Control register shadow
- SPI EEPROM stuff
 2003-10-21 04:39:32 +00:00
thorpej
2cadb9ce85 Record characteristics of the bus connection at attach time. 2003-10-21 04:35:01 +00:00
fvdl
ce7e811d1d And the wise man said: An u_int32_t is not a pointer, my young apprentice, 
so thou shalt not compare it to NULL.
 2003-10-21 03:24:25 +00:00
fvdl
c9aca9f010 Don't pass NULL as an integer value. 2003-10-21 03:22:25 +00:00