opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).
So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.
This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.
The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
filemark 'coz you opened write only and didn't do anything else,
call st_check_eod to possibly write TWO furshlugginer filemarks.
Also- return any errors from writing filemarks out of stclose.
like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
Also- to be fair and on review, kern/391 isn't really addressed by
the previous commits. In reviewing, I'm embarassed to find that this
talks about reading at EOT. I'm actually going to claim that this
is 'not a bug' or 'fixed already' in that at the end of media (at the
edge of recorded media), you may continuously open the tape (should
you choose to) issue a read, and zero bytes will transfer- this is a
sufficient EOF indicator.
a now unused variable. Also, remove the restriction against at density
code being greater than the max SCSI 2 density code: 0x80..0xff are the
Vendor Unique codes and most certainly should be allowed. The check for
invalid values should be less than 0 or greater than 255.
Oh- yeah, the previous commit addressed kern/391.
EOM_PENDING. Set up a persistent EARLYWARNING behaviour flag. If
set, EOM behaviour forces a 'short read' to signal logical (as
opposed to physical) end of media. The user application may, of
course, do with this information what it will.
The EARLYWARNING behaviour may be enabled/disabled by a MTIOCTOP
operation. The default action is to not have EARLYWARNING enabled-
but this may be reversed by an option ST_ENABLE_EARLYWARN in
the kernel build.
("CTLMODE") subdevice. There are legitimate uses for raw commands with
normal tape handles too.
[I'm not sure if this is a final solution. Administrators might want
to set up a more finegrained policy. However, this should not be mixed
with the "set defaults" semantics of the "CTLMODE" subdevice; another
flag should be used instead (eg execute permission or a minor number bit).]
data ASC/ASCQ of 0x04/0x01 (logical unit not ready, initialization in progress),
hang out for 5 seconds and return a RETRY THE OPERATION command. If we
get a check condition/sense data ASC/ASCQ of 0x04/0x02 (logical unit not
ready, initialization command required), send a polled/nosleep START UNIT
command and return a RETRY THE OPERATION command if that succeeds.
Don't send a START UNIT to a disk quirked as SDEV_NO_START. Don't send
a START UNIT to removable media. The reason for the latter is to not
just blindly spin up new (maybe changed) media.
I should note that I've successfully made this work with the ISP host
adapter so far. Other host adapters will need some work to be able
to manage or reasonably fail NOSLEEP/POLL commands while in this
state. Alternatively, the internal SCSI midlayer structure has got
to allow for more controlled error recovery (e.g., restart queues
controlled by the target driver).
drivers' sense handlers to return. Coincidentally one of them ends up
being ERESTARTSYS.
2) Add a SCSI_URGENT flag to xs structure- this allows host adapters that
do command tagging to do the right thing wrt a tag.
1) Quirk entries for Storage Tek 9490 (Timberline) and D3 (Redwood)
drives.
2) Modification to st_loadtape to do a REWIND to BOT if the
action is a load and the tape doesn't support the LOAD command
(9490, SD3, and IBM 3590).
3) Cleaned up the 'undersized user record' error message to
make a little more sense.
Various bug fixes:
kern/1275: Now returns values in dsreg and erreg and sets resid
(as best as it can for a 16 but integer). See also
a recent change to mtio.h. We are declining to fix
the portion of this bug about naming a more specific
SCSI device. Since there is nothing programmatic
you can do with that information, it is not useful
to pass back at this time.
A side effect of this change is that doing MTIOCGET
also forces a mode sense (to get the current state
of WRITE PROTECT).
kern/5647: Now no longer logs to the console ILI or Filemark or (first)
EOM (on write) errors (unless SCSIDEBUG is set).
kern/5525: Substantially increased timeouts for a variety of
operations, and split them into categories of
I/O, Space, and Control operations (each have
likely different inherent times). I/O is for
reads/writes. Control is for mode sense/select.
Space is for spacing the tape.
Until EOM handling is changed, though kern/391 is still not fixed. A side
effect of EOM handling is that you now always 'lose' (to the writing
application's view) the last write since EIO is what is returned on
EOM detection during writes. Hopefully the reader applications don't
get too bent out of shape by this.
takes to do IELEM can be proportional to the number of elements, but is
also affected by wierd things like how readable the barcodes on the
media are. There are worst case scenarios I've seen where there are
white labels on the back of tapes with pencilled in labels which is
*just* close enough to being a bar code that an Exabyte 120 would
peer at them myopically and long enough for a *really* long time to
pass in inventorying the jukebox.
I've upped the limit to be proportional to 5 minutes per element. That
is long enough that someone I'm sure will complain about "you wait
to long and should time out" for broken h/w.
As is also noted in the PR, there are a lot of other issues here. It's
really also a question as to whether to update this driver or go
with CAM's driver. This one doesn't have switching between block
descriptors and not, doesn't support volume tag setting, and so on.
Time is limited. This PR should have been closed and fixed right away,
tho.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
operation with address 0 length 0, which, according to the SCSI-2 spec, should
be interpreted as "synchronize all remaining blocks beginning at address 0".
fixes a condition where stale data can be left in the status byte, causing
user programs that interpret it to fail.
Fixes kern/4964 from Chris Jones <cjones@honors.montana.edu>.
UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code. i provided some help
getting swap and paging working, and other bug fixes/ideas. chuck
silvers <chuq@chuq.com> also provided some other fixes.
this is the rest of the MI portion changes.
this will be KNF'd shortly. :-)
fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!)
clean up in various ways:
* make common atapi_mode_{sense,select}() functions.
* put ATAPI data structures in more sensible headers, split up by
device type.
* include headers a bit more carefully.
* pass flags to attachment-specific cd functions, and use them.
* get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move
them into the correct place in scsi_base.c.
* fix minor typo in struct name in scsipiconf.h (which was apparently
never used except in a #define later in the same file).
* use __attribute__ to force 4-byte alignment for xs command store,
so that architectures trying to bus_space_write_multi_N() (where
N > 1) that data to a controller won't lose.
* clean up a few comments in typos, and make a few #defines easier to
understand/maintain.
* rename cd_link.h to cdvar.h (via repository copy). This is exactly
what a 'var' file is supposed to be.
to be reloaded every time it is checked. This avoids a condition where
it can be cached in a register in such a way that updates to the flags in
an interrupt handler to not be noticed, which in turn causes the process
doing the i/o to sleep forever. Bug report and suggested fix from
Hiroshi HORIMOTO <horimoto@cs-yuugao.cs.sist.ac.jp>, PR $4460.
cd_scsibus_set_mode, to specifie the real len of "data" we need. These
functions were broken when scsi_cd_write_params_page was added to
scsi_cd_pages, thus changing the len of scsi_cd_mode_data.
The following patch employs a smarter adaptive polling
scheme. It also improves the comments, in particular giving
due credit to Phil Budne for his efforts in nunderstanding
the device. It also relaxes the pattern for auto config so
more devices match.
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
- dereference a pointer to function explicitly.
- fold long line to fit columns < 80.
- put whitespaces around a binary operator.
- don't put a single statement into a block.
about actual position when reading tape position, you should flush any
pending writes. Well, if the tape is write protected, some drives don't
see the zero count WRITE FILE MARK command as a no-op and complain. Dumb!
- Indent with tab of width 8.
- Use four column to indent continuation line.
- Fold long line if possible.
- Use return (xx) instead of return xx.
- Compare pointer against NULL instead of testing like boolean.
- Delete whitespace at the end of line.
- Delete whitespace in front of function call operator.
- Delete whitespace after cast.
- Dereference a pointer to function explicitly.
- Add an empty line after local variable declaration.
- Use NULL instead of (char *)0.
- Dont use block for single statement.
The method for doing this is to try and use the DATA COMPRESSION mode page
first, followed by the DEVICE CONFIGURATION page (this is because most newer
tape devices are now using DATA COMPRESSION instead of DEVICE CONFIGURATION
pages).
Add in the logical && hardware read position and set position ioctls. Oddly
enough, because NetBSD is limited in having the driver track file && record
numbers, the usual agony over what to do once you use logical or hardware
block positioning can be avoided. Amusing.
Make a minor change so that for SCSIVERBOSE cases that SCSI_SILENT in
the xs' flags is still observed.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
gup to the kernel) more detailed SCSI error printing, based off of final
SCSI-2 specification. This will also print out things like progress indicator
errors, and will also dump out additional sense bytes that haven't been decoded.
Also, turned the error message 'DELAYED' to 'DEFERRED' since that's more
accurate.
is called *after* the driver `done' routine. This fixes disk I/O statistics
on SCSI devices.
Also, calling the `done' routine with a `complete' argument of 0 and actually
having it do anything meaningful loses in at least 3 ways, so just nuke the
argument altogether and don't call it this way. If the driver needs to do
some error handling, that's what `err_handler' is for.
into 8 bits generate (bogus) warnings on some architectures, but the
change to pad on "scsi inquiry" is no longer needed, apparently.
Thanks to Matthias Pfaller for pointing the latter out to me.
- Deal with devices that ignore the length specified in the
inquiry command.
- Allow asynchronous requests without using a buf (key off NOSLEEP instead).
- Implement a simple quirks framework for changers.
- Add a quirk for the Spectra 9000 8mm tape library; it requires a
slightly-longer-than-1-minute delay to take tape inventory. Many
thanks to David Webster at Cygnus Solutions for testing this for me.
host adapter drivers, indicating the highest SCSI target they can
address. Use this value to dynamically allocate data structures, rather
than hard-coding 8 targets.
These changes allow targets > 7 to be addressed on wide SCSI busses.
Fixes PRs #1674 and #2892.
management by itself. But when it gets a start unit request, it keeps
the floppy motor running all the time. This adds code for dealing with
yet another quirk (SDEV_NOSTARTUNIT) that prevents sd.c from sending
start unit requests. A entry for the Teac FC-1 is added to the quirk
table.
dev/microcode/aic7xxx_seq.h,
dev/ic/aic7xxxreg.h:
Remove intrinsic knowledge about SDTR and WDTR messages and replace it
with a generic message system that allows the kernel driver to handle
SDTR, WDTR and any other type of extended message it chooses too. This
makes the sequencer code much simpler, makes extended message handling
debuggable since the bulk of the work is in the kernel driver, and saves
lots of instruction space.
Regen microcode header file.
dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h:
Add code to handle WDTR and SDTR negotiation in light of the changes in
the message interface to the sequencer. Don't reject targets that
negotiate async by sending an SDTR with a 0 offset. Use an sdtr message
with 0,0 to negotiate async when a target suggests a period that is too
long for us to handle. Some tape and cdrom drives don't like us doing
the message reject that we did in the past.
Fix a problem with handing the QUEUE FULL condition.
Fix a race condition (most likely the cause of the SCB paging problems) that
might allow the sequencer to get unpaused before the condition that caused
it to be paused (a SEQINT) was handled.
Race condition pointed out by Doug Ledford <dledford@dialnet.net> and
by "Dan Willis" <dan@plutotech.com>.
dev/pci/ahc_pci.c:
Add support for the 2940AU, an aic7860 based controller.
dev/pci/pcidevs.h, dev/pci/pcidevs_data.h:
Add product IDs for the 2940AU, aic7860 and aic7855.
Regen data file.
scsi/scsi_message.h:
Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these
extended messages.
Thanks to Chuck Cranor <chuck@maria.wustl.edu> for testing these changes
out for me.
if the version is <= SCSI-2. This should help some older SCSI
devices that previously needed the "NOLUNS" quirk. While this is
not strictly necessary on SCSI-2 devices, the spec allows it,
so we set it for SCSI-2 devices "just in case". See section 7.2.2 of
Draft X3T9.2 Rev 10L for details.
(2) in scsibusmatch, match channel as appropriate.
(3) add a scsiprint() function, to do the "scsibus at..."
and channel (if not SCSI_CHANNEL_ONLY_ONE) printing,
i.e. the common functionality that all SCSI drivers currently
should be doing.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
string with 0xFF instead of 0x20. Shorten the compare to 6 bytes to
take care of this.
Fixes PR #2617 by myself, which is based on a private problem report
by Neil Brewitt.
all attempts to mode select, even if the attempted mode is supported.
Add the ST_Q_UNIMODAL quirk for the HP Colorado T4000s which exhibits
this behavior. (Someone please lob a tactical nuke in that direction.)
From David Rosenthal <dshr@vitria.com> on netbsd-bugs.
influence from the old driver (written by Stefan Grefen) and from
an autochanger driver written by the Systems Programming Group at the
University of Utah Computer Science Department (currently residing
in src/sys/arch/hp300/dev/ac.c).
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- controller calls scsi_done() with error XS_TIMEOUT
- scsi_done() calls sddone()
- sddone() calls disk_unbusy()
- scsi_done() calls controller to retry command (missing the
call to disk_busy())
- controller calls scsi_done()
- scsi_done() calls sddone()
- sddone() calls disk_busy(), which panics because of the imbalance.
Bug noticed by Leo Weppleman, who also suggested this fix; pass an additional
boolean argument ("complete") to the device's "done" routine, with a
value of `0' passed from the previous call to "done", and add an additional
call to "done" when the xfer resources are freed.
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
in a 6-byte read/write cdb (namely, length == 0 really means 256), and
that we handle this conservatively by limiting the transfer to 255 blocks.
*sigh* One just never knows how a pre-scsi-1 device is going to behave.
If the read or write request can fit into a 6-byte cdb, then
use a 6-byte cdb, otherwise use the 10-byte as before.
In sd.c:
In sdattach(), make a note if the device is "ancient" (i.e.
inqbuf.version & SID_ANSII == 0).
Implement sdminphys(): if the device is "ancient", shorten the
transfer so it will fit into a 6-byte cdb.
These changes have eliminated the rejected read/write requests on my
Sun 3/60 with 2 ESDI disks behind an Emulex MD21.
(1) all Chinon CDS-431 CD-ROMs (regardless of revision)
are forced to only having LUN 0, at the suggestion
of Michael Hitch.
(2) _force_ searching of extra LUNs for the Emulex MD21/S2
ESDI bridge. It's pre-SCSI 1, but knows about LUNs.
"amazing." From Jason Thorpe.
(3) recognize an Emulex tape adapter in front of a QIC-36
tape, and have it forced to only LUN 0. This is
an odd one; vendor, name, and rev strings are all
spaces. Anything that mathes this is very likely
broken, anyway, so might as well give it a shot.
Again from Jason Thorpe.
mjacob