Commit Graph

3068 Commits

Author SHA1 Message Date
dyoung 595c6d88b2 Add support for Prism monitor mode. From Kevin Lahey
<kml@patheticgeek.net>.

This patch does NOT add monitor mode support for the Lucent radios.

awi(4) was only modified for compatibility with the new mediaopt.
It does NOT support monitor mode.

Tested by Kevin, Daniel Carosone, and I.
2003-02-25 01:57:35 +00:00
dyoung 9b203bb525 Step 0 of adding Prism monitor mode: name the firmware command for
setting up manufacturing test modes. Name the sub-command for
turning on monitor mode.
2003-02-25 00:56:35 +00:00
dyoung eb7810a127 Disable interrupts before ACKing them to avoid the obvious race. 2003-02-25 00:51:14 +00:00
dyoung 0691446706 Following implementation for other RIDs, read the driver's notion
of the fragmentation threshold instead of the hardware's notion.
2003-02-25 00:47:11 +00:00
tsutsui 0ff49f9f99 hz -> Hz 2003-02-21 17:14:04 +00:00
petrov 1d6ce76050 Use MIIF_FORCEANEG. 2003-02-20 20:09:56 +00:00
matt 4630a8e7f3 Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it.  (XXX hme probably should use it but I can't
test that).
2003-02-20 00:55:21 +00:00
tsutsui d9a7d0e611 Also remove (probably) incorrect comment. 2003-02-18 16:42:40 +00:00
tsutsui 4adb30abcd hz -> Hz (from OpenBSD) 2003-02-18 16:37:48 +00:00
tsutsui 636e5d57b4 Remove unusable debug code. 2003-02-18 16:36:58 +00:00
pk b377c6693a Preserve the current PHY select bit in the MIF configuration register
in mii_readreg()/mii_writereg(). Also restore this bit based on the
currently selected media instance every time we need to reinitialise
the interface.
2003-02-13 12:10:20 +00:00
jdolecek 998befbc32 make 'name' and 'data' of struct wsdisplay_font const, mark data arrays
in font sources const
2003-02-09 10:29:35 +00:00
itohy d0e6f0f013 - init panpot at reset
- whitespace police
2003-02-09 09:28:21 +00:00
tsutsui 6aea963ed9 It seems the LAN Adapter on dreamcast actually uses slow 150ns SRAM,
so handle it properly by an additional quirk flag in sc_flags.

The problem was reported by Pat Wendorf on port-dreamcast, and
the fix was suggested and confirmed by Christian Groessler.
2003-02-05 12:03:54 +00:00
martin 688ebd679e Fix swapped malloc parameters - caught by recent malloce(9) changes. 2003-02-04 23:26:36 +00:00
pk 557a5199d2 Make this driver MP-safe by using a single spin lock to guard all its entrances. 2003-02-04 20:05:11 +00:00
thorpej b7f3c62431 Use bus_dmamap_load_mbuf() in fxp_add_rfabuf(). 2003-02-04 17:50:53 +00:00
wiz cd68fb44fb guarantee, not guarentee. Idea from miod@openbsd. 2003-02-02 10:24:38 +00:00
martin 7ab127868a Clenup malloc signature change fallout. 2003-02-01 13:23:28 +00:00
thorpej b193480908 Add extensible malloc types, adapted from FreeBSD. This turns
malloc types into a structure, a pointer to which is passed around,
instead of an int constant.  Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
2003-02-01 06:23:35 +00:00
tsutsui ef47e3f676 Changes to allow machines which don't use text mode at the boot time
to use generic VGA driver(s):
- Allow VGA drivers to use wsfont instead of builtin font.
- Add vga_reset() function, which will be called from MD consinit(),
  to put VGA into text mode. This function is enabled by options VGA_RESET.
2003-01-31 21:57:23 +00:00
pk 8f4478d022 lance_init(): explicitly clearing the `initialisation done' bit in the
status register triggers an interrupt which we don't handle.  Since the
driver doesn't depend on this status bit anywhere else, just leave it alone.
2003-01-31 17:40:05 +00:00
thorpej 749715f6ee Use aprint_*(). 2003-01-31 00:26:25 +00:00
pk ac9d761168 The introduction of FAS366 support annihilated the `reselect-while-selecting'
workaround for the ESP100 variant.
2003-01-30 11:03:45 +00:00
wiz 9115df8c49 success, not sucess. Noted by mjl. 2003-01-28 22:35:02 +00:00
kleink 8f87fa74eb Fix printf format warnings in previous. 2003-01-28 18:16:18 +00:00
pk be1188e00d Provide locking required by the interrupt handlers running at IPL_SERIAL. 2003-01-28 12:35:31 +00:00
ad 6bae70db81 Also save status info in the user command packet. 2003-01-27 23:31:19 +00:00
thorpej 3381232270 Experimental support for RAID volumes configured by ATA "RAID" controllers.
Such RAID controllers are actually just IDE controllers with a BIOS that
can create RAID volumes and write the configuration info to config blocks
on the disks.  The BIOS can do I/O to these volumes, and the OS must
understand the config blocks and implement RAID in software in order to be
able to use these volumes.

Only SPAN (simple concatenation) and RAID0 are supported at this time,
and writing back config blocks is also not supported at this time.  Currently,
only the Promise configuration scheme is supported, although supporting
the Highpoint scheme should not be too difficult.

In any case, this is sufficient to use the Promise RAID0 volume (thus
preserving the win2k AS installation) on this new Intel server I have.

Thanks to Soren Schmidt for doing the work in FreeBSD; it made this
task much easier.  The config block parsing code is adapted from his
work.
2003-01-27 18:21:23 +00:00
tsutsui 934e3c5a47 Set a value for MISCOUT register correctly in vga_setup_regs(). 2003-01-27 15:27:44 +00:00
tsutsui 289b9289f3 const'ify. 2003-01-27 15:22:47 +00:00
tsutsui 89b4d6221e - Replace some magic numbers with proper macro.
- Use vga_6845_{read,write}() defined in pcdisplayvar.h and
  remove vga_crtc_{read,write}() macros in vgareg.h.
2003-01-27 15:16:10 +00:00
tsutsui 862013bb51 - Use u_int8_t instead of char for register structure.
- Define MC6845_NREGS like vgareg.h.
2003-01-27 14:53:33 +00:00
tsutsui a8c7515f5f KNF and space/TAB cleanup. 2003-01-27 14:46:10 +00:00
bouyer 0cb4c95848 Ops, initialise len before using it.
Also, the minimum frame len is ETHER_MIN_LEN - ETHER_CRC_LEN.
2003-01-27 10:35:08 +00:00
pk a22484a1ea zs_shutdown: lower IPL before sleeping. Also note the fact that the
effectiveness of that very tsleep() call is dubious at best.
2003-01-24 20:46:45 +00:00
augustss 8aa76b0ae7 Add processor interface register definitions. 2003-01-23 21:17:15 +00:00
simonb 4cde8adf99 Remove variable that is only assigned too but not referenced. 2003-01-20 07:34:37 +00:00
simonb d081ef5767 Remove unreachable break after return. 2003-01-20 07:28:26 +00:00
simonb d0c3a04b6a Remove variables that are only assigned too but not referenced. 2003-01-20 07:25:04 +00:00
simonb bbd9776970 Remove variable that is only assigned too but not referenced. 2003-01-20 07:20:01 +00:00
simonb 276fd1665c The Double-Semi-Colon Police. 2003-01-20 05:29:53 +00:00
soren 12490413be Typo. 2003-01-20 01:50:31 +00:00
soren 0a8d7994d1 Attachment for the HD44780 display and keypad on the front of Cobalt machines. 2003-01-20 01:26:12 +00:00
soren ec3de7e879 Driver for the Hitachi HD44780 used in many small LCD panels.
Written by Dennis Chernoivanov.
2003-01-20 01:20:50 +00:00
rafal 537bf9a526 Change DS1286 definitions to start with DS1286_ rather than DS_ so these and
DS1687 definitions are easier to distinguish.
2003-01-19 22:20:43 +00:00
rafal 6d00714de4 Add CMU license since this did start out as a copy of mc146818reg.h, which
is under the CMU license.
2003-01-18 22:13:18 +00:00
rafal d402607ec3 Add register definitions for the Dallas Semiconductor DS1687 and succesors,
a series of Y2k-compliant multiplexed-bus RTC chips.  At the lowest levels,
the DS1687 and successors are register-compatible with the MC146818(A) and
DS1287, but also provide Y2k-safe date storage and other extra bits, like a
silicon serial number and larger amounts of NVRAM.
2003-01-18 22:07:21 +00:00
tsutsui fcdaed16cd When the extra pad buffer is used, the number of TX segments
should be incremented than dm_nsegs.
2003-01-18 13:53:29 +00:00
tsutsui 49a0506ca0 Fix pasto and typos. 2003-01-18 13:12:55 +00:00