7ddcb8122d
SDEV_DB -> SCSIPI_DB
2001-05-17 20:02:56 +00:00
048f92e86e
Set scrolling region top correctly.
...
Fixes scrolling bug in sub-windows.
2001-05-17 19:04:01 +00:00
bc8eda57c9
increase the delay after PHY reset - it seems that mii register accesses
...
can fail if attempted too soon after reset
2001-05-17 19:00:18 +00:00
199e9f8164
regen
2001-05-17 17:39:30 +00:00
10aff2d3f0
argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
...
They managed to mess it up in a new way.
2001-05-17 17:39:00 +00:00
c1f451f54d
regen
2001-05-17 17:37:01 +00:00
2e9334d53e
add some stuff I got between my fingers
2001-05-17 17:36:30 +00:00
c1617a9b13
check PCI subsystem ID for a SMC9432BTX1 or SMC9432FTX and tell the common
...
driver about their media support (BNC and 100FX, respectively)
2001-05-17 17:35:13 +00:00
323adb5a41
support BNC interfaces (serial mode) as on the SMC9432BTX and 100FX
...
on the SMC9432FTX
2001-05-17 17:32:47 +00:00
1ea0cb1ea4
support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER
...
flag is passed in from the board driver
2001-05-17 17:29:54 +00:00
002851041c
re-enable mii_flags in attach args - I've found a use for it: tell the
...
PHY which support it that a fiber interface is present
2001-05-17 17:28:21 +00:00
9c92176b44
don't bother providing duplicate code for {read,write}_eflags() since it's in cpufuncs.h anyway
2001-05-17 16:35:06 +00:00
b9528c4bd8
Call doshutdownhooks() in cpu_reboot().
...
It was not called when I committed the osiop, and I didn't notice
osiop caused problem when I fixed cpu_reboot()...
2001-05-17 14:53:54 +00:00
fc66251bda
plug memory leak on invalid fragment packet. supress noisy log. from kame
2001-05-17 14:01:37 +00:00
0fcd8f3c7f
regen
2001-05-17 13:15:47 +00:00
8f8e3e808f
add products
...
Intel PRO/Wireless 2011 LAN PC Card
2001-05-17 13:14:19 +00:00
c7db455f32
Fix fomula to calcurate TClock; TClock = VTClock / tdiv, not PClock / tdiv.
...
The manual is inconsistient about this.
2001-05-17 13:10:46 +00:00
5e1115908d
Revert previous change; this breaks for the old controllers which 1.6
...
should help for. Instead, weaken the "echo" test: don't insist in
getting the same value back which was written.
2001-05-17 10:48:39 +00:00
d1bc67e029
In osiop_scsidone(), call scsipi_done() even for polled operations.
...
This fixes a `hang' on shutdown when the `Synchronise Cache' command
is sent to a disk. (It uses polled mode because it is called from inside
a shutdown hook).
2001-05-17 10:35:30 +00:00
a657f17343
Add port-sun2 category, per PR admin/12657.
2001-05-17 09:13:58 +00:00
749144ca0c
macppc/prep:
...
recommend using official NetBSD CD-R image instead of rolling own CD-R
describe how to boot a kernel from an HFS partition
moved partitioning HDs to before copying files to it.
macppc/whatis:
heh, just noticed that it needed updating from NetBSD 1.4
2001-05-17 07:39:27 +00:00
c74dc48133
Use VRIP_SIU_ADDR instead of 0x0c000000 for base address of serial console
...
or kgdb connection.
2001-05-17 06:00:22 +00:00
c2b5ec5220
Add a few nits. Hubs seem problematic on resets sometimes.
...
Also, make sure fwohci can detach cleanly (for cardbus).
2001-05-17 05:30:37 +00:00
f2649e3000
Include opt_vr41xx.h and vrcpudef.h
2001-05-17 05:25:32 +00:00
e82d2d52c6
vr4122 releted definition.
2001-05-17 05:04:30 +00:00
8f77918d6c
the call to uvm_km_valloc() in pmap_init() can end up triggering a call to
...
pmap_growkernel() on large memory machines. at this point we've already
called uvm_page_init(), so we can no longer use uvm_page_physget().
but the flag we use to decide whether to use uvm_page_physget() vs.
uvm_pagealloc() is only set at the end of pmap_init(), so we use
uvm_page_physget() anyway. switch to using uvm.page_init_done to decide
how to allocate pages, since that's the real indicator of when we have to
change methods.
2001-05-17 02:31:26 +00:00
bcc2ce4f8c
give sunkbd and sunms a "poll" routine.
2001-05-17 02:24:00 +00:00
c7a624dcc6
Allow to pass -d option to kernel.
2001-05-17 01:50:35 +00:00
93819542b3
PR/12963:Jason Waterman: Fix signed cast problems.
2001-05-17 01:02:17 +00:00
6859233343
bcopy is dead on i386. the one use left in the kernel was in locore.s
...
itself, and that got replaced with a call to memcpy. Ross deserves
most of the credit.
note that if you've seen bcopy elsewhere in the kernel, systm.h
defines it as a macro...
2001-05-16 22:09:36 +00:00
90cabee3fb
Per helpful suggestion from LukeM- make INLINE usage consistent (and
...
use correct __inline format).
2001-05-16 21:41:52 +00:00
8e532c1ad1
Make sure to allocate big enough mbuf data area before elevating
...
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.
This also fixes ancient kern/2478 by Bill Sommerfeld.
2001-05-16 20:30:52 +00:00
c22fb1db55
Finally nobble the bus_dmamap_sync() problem with osiop(4).
...
Basically, bus_dmamap_sync() `PREREAD' needs to flush the cache
for the start and end of the region if it is not aligned to
a cacheline boundary, otherwise a subsequent POSTREAD can *purge*
valid data which was in the cacheline but *outside* the region
passed to bus_dmamap_sync().
Bus snooping doesn't always help here because osiop(4) calls
bus_dmamap_sync() with POSTREAD even if no data was actually
transferred! (And we can't rely on snooping on the 68060 models anyway).
2001-05-16 19:06:46 +00:00
35f2b9136a
get up-to-date (cleanup, get rid of vm_offset_t)
2001-05-16 18:50:52 +00:00
2df9b8f13f
get up-to-date (cleanup, splimp->splvm)
2001-05-16 18:49:51 +00:00
038ce6b8af
get up-to-date (sprinkle pmap_update())
2001-05-16 18:49:05 +00:00
26085708d5
get up-to-date (get rid of vm specific error codes, sprinkle pmap_update())
2001-05-16 18:48:21 +00:00
29182d41aa
get up-to-date (splimp->splvm, cleanup, sprinkle pmap_update())
2001-05-16 18:47:04 +00:00
96a430ba30
If _SOFT_FLOAT is defined, pull floating point va_args from the GPR
...
area and not the FPR area (by having the double argument type test
always fail).
Fixes problems using <stdarg.h> with -msoft-float.
2001-05-16 15:41:03 +00:00
38e4ed8f09
Pass -D_SOFT_FLOAT to cpp if called with -msoft-float.
2001-05-16 15:36:47 +00:00
9c23ab2d54
Add "switch to ELF".
2001-05-16 15:01:40 +00:00
8a78799bf4
support BUFFALO AirStation WLI-PCM-S11
...
this card are PRISM2.5 card.
2001-05-16 14:33:21 +00:00
4802a48290
PR/12956: Grant Beattie: Explain how to copy the timezone files so that
...
programs run in the proper timezone
2001-05-16 14:27:58 +00:00
3c3caa0eb2
don't generate opt_spec_platform.h
2001-05-16 14:26:40 +00:00
c6da2452c0
Put back /usr/include/dev/tc/sticreg.h.
2001-05-16 13:48:52 +00:00
25221c413e
regen
2001-05-16 12:57:55 +00:00
4c575cc65b
add product
...
BUFFALO AirStation 11Mbps WLAN Card
2001-05-16 12:57:27 +00:00
cbcd644ce8
sigreturn() fix (from kleink)
2001-05-16 12:42:38 +00:00
3f76420b8a
Fixed wrapping of multiline fields.
2001-05-16 11:51:16 +00:00
43923690d3
Add an entry for Victor MP-C303.
2001-05-16 11:13:20 +00:00
bouyer