veego
17718db1b9
Add support for boards with an Oxford Semiconductor chip.
...
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
mycroft
f73703a4a6
Set the play and record parameters separately.
...
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
2001-01-04 07:05:00 +00:00
mycroft
c142ce184b
Several things:
...
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
2001-01-04 06:20:49 +00:00
mycroft
6ff81e44ec
No really, this is half-duplex for now. Lame.
2001-01-04 05:25:24 +00:00
mycroft
ab1d9b87b0
Make some vague attempt to handle devices that do both input and output. This
...
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
2001-01-04 03:53:09 +00:00
enami
25481ad786
Redo previous; we need to notify kbd driver.
2001-01-04 01:33:37 +00:00
mycroft
29ecdf4b0c
Regen.
2001-01-03 23:15:14 +00:00
mycroft
cbfa3ad17d
Add Chrysalis-ITS LunaVPN card.
2001-01-03 23:14:39 +00:00
enami
62a4aefda9
Avoid null pointer dereference so that boot -d works again.
2001-01-03 23:03:45 +00:00
enami
7eab063a4f
Use device_lookup.
2001-01-03 23:00:24 +00:00
ad
a06fc2bf4b
Fix thinko in previous.
2001-01-03 21:17:05 +00:00
ad
5fcbd5f722
- Fix a number of bugs with the configuration stuff.
...
- Bash the passthrough interface into working order.
- Add an ioctl to retrieve the `tidmap'.
2001-01-03 21:04:01 +00:00
ad
8494f44b67
Make dumps work, and put the first part of detach into ld.c.
2001-01-03 21:01:28 +00:00
bouyer
286f4f934f
Add a 'flag' member to struct puc_attach_args and struct port. For
...
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 15:13:15 +00:00
augustss
c2b9d052ba
Cosmetics.
2001-01-02 23:08:54 +00:00
augustss
3ea054452a
Add placeholder for firmware.
2001-01-02 22:38:51 +00:00
augustss
0e9ef4adc0
Forgotten commit for EZ-USB loader.
2001-01-02 22:24:00 +00:00
augustss
32e4d7004e
Add a transient driver for the YAP phone that downloads firmware into
...
the EZ-USB chip. After downloading the firmware the device detaches
and then reattaches as a composite device (audio + HID).
XXX For now there is no firmware committed since the vendor (Silicon
XXX Portals) has not yet agreed that we can redistribute their firmware.
2001-01-02 18:52:44 +00:00
augustss
5b86e8bfa8
Add subroutines to download firmware into Cypress (formerly Anchor)
...
EZ-USB chips.
2001-01-02 18:49:56 +00:00
augustss
f586756bcf
Regen.
2001-01-02 09:53:16 +00:00
augustss
d3fd188459
Add a new TI hub chip.
2001-01-02 09:52:55 +00:00
mrg
d9a9b8d6d5
the tcds cards work in pmaxen. move tcds attachment to files.tc. leave asc
...
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
2001-01-01 23:43:05 +00:00
ad
c29358e0f9
Don't try to configure `uninteresting' devices.
2001-01-01 19:03:30 +00:00
augustss
8afb11bb20
Don't match on a bunch of scanners that should be handled by a
...
different driver.
2001-01-01 18:52:05 +00:00
augustss
47c95db1c3
Regen.
2001-01-01 18:51:08 +00:00
augustss
f33102e85d
Add another scanner.
2001-01-01 18:50:42 +00:00
augustss
5806434428
Call vdevgone() with correct minor range.
2001-01-01 18:34:12 +00:00
augustss
2f1e60b46c
Support device detach.
...
Don't call scanjet_attach() for all HP scanners.
Also, ANSIfy while I'm here.
2001-01-01 18:28:49 +00:00
ad
2f5cf27275
PR 6402: some SCSI devices use \377 as blank, so adjust scsipi_strvis().
2000-12-31 17:54:29 +00:00
augustss
9a52f80f0f
Make the controller survive suspend/resume. Thanks to Steve Woodford
...
<steve@mctavish.co.uk> for testing.
2000-12-31 14:29:54 +00:00
ad
196d40d973
Regen.
2000-12-31 14:04:26 +00:00
ad
fb04e415dd
Fix Mylex products.
2000-12-31 14:03:24 +00:00
ragge
9bbf84e4ca
Changes for dzkbd/dzms. This is not yet finished, but at least the
...
kernel is useable.
2000-12-30 22:11:46 +00:00
mjacob
462ff196a4
[ dummy checkin to add to previous CVS ]
...
It's probably not really a compiler bug- somebody pointed out
that it was the kernel making strings readonly. But I do think it's
a bug. The actual code was really more like:
char *revname;
...
revname = "2X00";
...
revname[1] = '2'; <<<<<<<<< BOOOM
The variable revname is not a const. If I had said
const char *revname = "2X00"
...
revname[1] = '2';
that would indeed be breaking const rules.
2000-12-30 19:47:20 +00:00
mjacob
8adadc9bda
There's a compiler bug for sparc64 that makes the construct:
...
char *foo = "XXXX";
...
foo[1] = 'Y';
blow up (in the kernel) with the 2nd assignment. Work around it here-
it's probably just as well- I was spending more in cpu instructions doing
the assignment than I was saving in string space (it would have been
cheap on a pdp11 or a 68k- but the address loads and assignments on something
like sparc or alpha way outweigh the savings in space. Tsk.).
2000-12-30 19:30:09 +00:00
wiz
1a40e855c8
Undo pci_intr_map change in non-NetBSD part of the file.
2000-12-30 17:02:53 +00:00
wiz
1796fa4bd8
Fix pasto in comment.
2000-12-30 16:55:24 +00:00
wiz
2ad3fd958d
Merge 2.18 to trunk.
2000-12-30 16:52:36 +00:00
mjacob
c6b9ad5aeb
Use bootverbose to now set whether or not we add
...
ISP_LOGCONFIG and ISP_LOGINFO messages into the
default logging mask.
2000-12-30 08:49:11 +00:00
castor
02d83a4c77
Fix PR port-hpcmips/11477 "only hpcmips panics with wireless network cards"
...
Adjust the payload of receive mbufs so the data following the
ethernet header is aligned.
2000-12-30 07:57:52 +00:00
sato
a2fe1adf2a
for calling sc->sc_acessops->pollc,
...
use wsdisplay_cd.cd_devs[unit] in accessing wsdisplay_softc
instead of casting pointer.
XXX: i compiled it in i386, hpcmips, alpha.
2000-12-30 05:38:50 +00:00
eeh
804add680f
Regen.
2000-12-30 04:39:03 +00:00
eeh
6cfa6f67c1
Fix typo.
2000-12-30 04:38:02 +00:00
eeh
44f785d4cd
Add Sun psycho bus controller.
2000-12-30 04:34:51 +00:00
mjacob
e5482757b5
Fix at least alpha kernel builds. You can't pun a pointer to a dev_t on
...
alpha. This is also a bad idea. I really don't know the ws code at all
or I would just fix the whole issue.
2000-12-30 02:58:42 +00:00
sato
9785bf0526
notify console polling mode or not to lower level framebuffer driver.
...
notify EMUL mode or not to lower level framebuffer driver.
these may use framebuffer level hardware acceleration/software optimization.
2000-12-30 01:41:51 +00:00
augustss
2c65dfb9b5
Be less talkative in attach.
2000-12-30 00:37:24 +00:00
tsutsui
b1cf284bd6
s/AP0_UDMA_MASK/APO_UDMA_MASK/
2000-12-29 18:59:01 +00:00
eeh
60edf7be2c
Add a bus type for psycho controllers.
2000-12-29 17:15:04 +00:00
augustss
271adbd54e
Try to get rounding right when setting mixer values.
2000-12-29 14:49:28 +00:00
augustss
560f4a2254
Set the mixer delta field.
2000-12-29 13:28:41 +00:00
augustss
b85fdbbc47
Add a field in mixer_devinfo_t that indicates the minimum delta to
...
change mixer value. A value of 0 indicates that the driver doesn't
supply a delta.
The change is backwards compatible.
2000-12-29 10:00:08 +00:00
augustss
34ee8a0f06
Supply our own report descriptor (from Nick Hibma) for the Wacom Graphire.
...
The descriptor it reports is broken.
XXX Not tested, because I don't have the device.
2000-12-29 01:47:49 +00:00
augustss
79f0bd6e1f
Update many URLs.
2000-12-29 01:24:55 +00:00
augustss
e9853f047a
Update location of specs.
2000-12-29 01:14:15 +00:00
sommerfeld
851de295eb
Change pci_intr_map to get interrupt source information from a "struct
...
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
2000-12-28 22:59:06 +00:00
mjacob
d4c32f2a63
Apply nearly all of Bill Sommerfeld's -Wformat patches. The one
...
change I didn't take is the %llu format- I can't have a common
across multiple platform module assume a %ll argument capability-
which really pointed out that I shouldn't be trying to *print*
something which could long long.
2000-12-28 22:27:46 +00:00
mjacob
3823efc25a
Apply Bill Sommerfeld's -Wformat changes.
2000-12-28 22:23:41 +00:00
mjacob
0dae1b3d9a
Turn ISP_LOCK/ISP_UNLOCK into ISP_ILOCK/ISP_IUNLOCK macros for routines
...
that are driven from a timeout (oops, they're on the interrupt stack).
2000-12-28 21:37:04 +00:00
augustss
20d1ae1adb
Add two more quirks:
...
UQ_AU_NO_FRAC for audio devices that cannot handle adjustment for fractional
sample size.
UQ_AU_INP_ASYNC for input devices that claim to be adaptive, but are in fact
asynchronous (an easy mistake to make unless you read the specs carefully :)
2000-12-28 11:56:22 +00:00
augustss
1e0da50daa
Regen.
2000-12-28 11:53:25 +00:00
augustss
bdcc0b7ad1
Add device no for YAP phone with firmware loaded.
2000-12-28 11:53:01 +00:00
augustss
4dbac77503
#define for USB_2_0
2000-12-28 10:40:36 +00:00
mjacob
8493d154d1
roll to 2.01.26 f/w
2000-12-28 08:30:40 +00:00
mjacob
d81d268d13
Use the ISP_CFG_NOINIT flag to decide whether to complete the full init
...
process steps (this is used in some platforms where you want to bring
the adapter to ready (to get a WWN, e.g.) , but not engage either target
or initiator mode until some later time). Set the correct defaults WWNs.
2000-12-28 08:26:12 +00:00
mjacob
a5498e1514
add an ISP_CFG_NOINIT flag
2000-12-28 08:24:17 +00:00
mjacob
b551237fb6
add two minor ATIO2 offsets
2000-12-28 08:23:48 +00:00
mjacob
829a533bfb
Restore the change fvdl made. Sorry about not noticing it. The
...
header (about 'Maintainer') is supposed to help encourage folks
to coordinate with me.
2000-12-28 08:11:52 +00:00
augustss
5236b76556
Make message about ignored endpoint a little clearer.
2000-12-28 01:01:42 +00:00
augustss
d2098567fe
Add audio terminal types.
2000-12-28 00:29:58 +00:00
tsutsui
59fcebab05
Regen. (Fix Acard UDMA IDE)
2000-12-27 15:36:42 +00:00
tsutsui
72347b9f8b
Fix entries of Acard UDMA IDE controllers.
2000-12-27 15:32:33 +00:00
sato
4e15bd1d3a
add Novac PCMCIA-IDE Card(Card for HD530P PCMCIA-IDE Box).
...
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'PnPIDE'.
2000-12-27 10:41:00 +00:00
augustss
bd1b9290e5
Regen.
2000-12-27 04:16:19 +00:00
augustss
96a684549d
Add a VIA chipset and Nvidia GeForce2 MX.
2000-12-27 04:15:53 +00:00
mycroft
a6fe4b78f2
Um, we need rnd.h so that cs_softc is defined properly. Overrunning structures
...
is bad.
NOTE: #IFDEF IN SOFTC DEFINITIONS IS BAD.
2000-12-26 09:42:21 +00:00
jmc
5b7fb2728a
Back out changes from 1.124 since the additions of *ports.master=-1 wasn't
...
documented as to why it was added in and it breaks the ability to set the
gain on playback. A longer term fix to set these correctly should be done but
none of the drivers today are doing this and not being able to set the playback
volume otherwise is a bit silly.
2000-12-25 00:01:39 +00:00
augustss
19c0d40186
Even stubs need improvements.
2000-12-24 06:42:34 +00:00
augustss
63fbac9a7d
Add some placeholders for the EHCI (USB 2) driver.
...
Don't get your hopes up. I've not even finished reading the
(100+) page spec, and I have no hardware.
2000-12-24 06:39:01 +00:00
bjh21
a48c9194bb
Print the newline after the memory test. This makes it clear that the delay's
...
related to this driver rather than the next device to be attached.
2000-12-23 16:37:20 +00:00
bjh21
690a8dbae1
fix typo: sigmips -> sgimips
2000-12-23 13:41:33 +00:00
bjh21
d925692c76
Add arm26 fpu.
2000-12-23 13:40:21 +00:00
tsutsui
aa223e5bce
Regen. (Adding Acard UDMA IDE controllers)
2000-12-23 10:13:20 +00:00
tsutsui
cf4a7f824c
Add Acard UDMA IDE controllers.
2000-12-23 10:11:55 +00:00
wiz
c8b0b91e7e
Fix pathnames in comment.
2000-12-23 01:37:57 +00:00
ad
024d36d353
- Fix bugs, make this useful.
...
- Add ioctls to start and stop the co-processor (if present).
2000-12-22 13:30:32 +00:00
onoe
2079f9d276
improve an_cmd() slightly:
...
- strip unnecessary loop to get command result status
- ack command after clearing busy bit
XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
probably due to heavy load of firmware in receiving.
2000-12-21 15:37:18 +00:00
onoe
4ee7a7cdcd
use pcmcia_devinfo() to print product info.
2000-12-21 15:32:46 +00:00
mycroft
e2ef1b88bb
Disable the 16-bit I/O space hack for ALL PROMISE CONTROLLERS.
...
This code is TOTALLY BROKEN and causes a NULL POINTER DEREFERENCE whenever it
is fired.
2000-12-21 01:19:24 +00:00
onoe
c6607f2fef
move definition of AN_INTRS from anreg.h to anvar.h
...
strip off AN_EV_CMD from AN_INTRS because it causes severe performance
problem.
2000-12-20 23:30:36 +00:00
bjh21
35a8d9d1b4
eh, podloader
2000-12-20 21:17:35 +00:00
thorpej
e3d7d246bb
Fix a debugging clause missed when fixing full-duplex support.
...
Noted by Wolfgang Rupprecht.
2000-12-20 21:06:41 +00:00
briggs
9a73f8b22b
Make _sure_ that we do not use selatn3 when it is not present. Fixes a
...
problem on pmax reported by Izumi Tsutsui. Tested also on alpha and mac68k.
2000-12-20 15:49:03 +00:00
aymeric
e08387765d
The key below <escape> is now ~ (KS_asciitilde) when shifted in the
...
french layout.
This is consistent with the XFree layout, and is very convenient.
2000-12-20 14:53:18 +00:00
haya
22be9ab855
Add IO Data CBIDE2 ata interface card.
2000-12-20 09:56:34 +00:00
haya
5f8d27d58b
regen.
2000-12-20 06:24:37 +00:00
haya
f899f18228
Add IO Data CBIDE2 ata interface card.
2000-12-20 06:05:13 +00:00
sommerfeld
824092cc68
Regen, because jhawk didn't
2000-12-20 05:03:37 +00:00
jhawk
391d469a00
Backout most of 1.46, because Jason checked in a load of crap from
...
his local tree that doesn't build with -current...
2000-12-20 04:36:26 +00:00
jhawk
6cca4087d9
s/NULL}/NULL }/
...
Did I mention this awk script really sucks?
2000-12-20 04:32:48 +00:00
eeh
d1ab475964
Make the driver negotiate sync again and remove some (hopefully) superfluous
...
DELAY()s.
2000-12-20 03:19:34 +00:00
thorpej
814729d3ae
Regen.
2000-12-19 17:11:38 +00:00
thorpej
d4bbed68f8
" " -> "&sp" in two entries, per Rafal Boni.
2000-12-19 17:11:22 +00:00
thorpej
54e034de88
Identify the SMC 2632W as a Prism II. From Rafal Boni, kern/11776.
2000-12-19 16:55:57 +00:00
thorpej
ef0031e520
Regen; add SMC 2632W.
2000-12-19 16:54:14 +00:00
thorpej
0ca5cacc47
Add SMC 2632W. From Rafal Boni, kern/11775.
2000-12-19 16:53:41 +00:00
pk
c6bd81f8a6
Fix reversed logic when setting setting sync-negotiation ability flag
2000-12-19 14:08:17 +00:00
nisimura
b3345434e4
Fix an error in xoffset calculation. Revealed in the case when
...
ri_width is less than ri_stride and screen is layouted RI_CENTERed.
2000-12-19 09:52:53 +00:00
onoe
684fe5613d
cleanup attach procedure, use tsleep() instead of long delay (and ignore
...
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
(RID 0xff50 or 0xff68 access failed)
2000-12-19 08:00:55 +00:00
mycroft
045091aa8f
Add a big comment in the previous section of code...
2000-12-19 06:23:26 +00:00
mycroft
463d0e577e
Back out previous change.
...
I removed this once before a long time ago, because it's wrong and breaks
PCMCIA on some machines. It also doesn't fix the Multia problems.
2000-12-19 06:04:02 +00:00
eeh
0db43ad6ce
Kill extra "attached" message.
2000-12-19 04:36:05 +00:00
onoe
f9af49b21b
I've inverted the logic of an_probe() in my previous commit to dev/ic/an.c
2000-12-19 01:59:21 +00:00
perseant
3475e639f3
Add register #defines similar to those in <dev/pci/tgareg.h>, referring to
...
a 32-bit sfb_reg_t, for easy comparison between tga and sfb Xservers.
2000-12-19 01:25:46 +00:00
mjl
aaad4d0284
Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq
...
being set in pnp mode.
2000-12-19 01:09:15 +00:00
mjl
324ff9ac52
Regen
2000-12-19 01:08:13 +00:00
mjl
a006fdf328
Correct ALS100+ entry.
2000-12-19 01:07:52 +00:00
thorpej
ba4b6847df
Fix a problem with the ALTQ changes that can cause bogus memory
...
refernces. Problem reported by Luke Mewburn.
2000-12-19 00:06:01 +00:00
thorpej
4dbafc4a71
Remove an IF_PREPEND() that slipped through.
2000-12-18 23:57:13 +00:00
briggs
7ea0edc288
If the target rejects a tag message, turn off tagged transfers for that target.
...
Also, adjust message/command construction in ncr53c9x_select() to work no
matter how the structure alignment works out (needed at least for m68k).
Tested by me on mac68k & alpha, and sanity-checked by eeh.
2000-12-18 23:39:44 +00:00
thorpej
57a13edc11
Use separate interrupt handlers for play and record the chip has
...
support for it and we're configured for separate play and record
DRQs. This makes full-duplex audio work on the Windows Sound System
(found in many Alpha systems).
Submitted by Juergen Weiss <weiss@uni-mainz.de> in kern/11178.
2000-12-18 21:31:32 +00:00
thorpej
7cc029e16c
Use IST_LEVEL as appropriate. Fixes PCMCIA interrupt problems
...
on the DEC Multia. From Juergen Weiss <weiss@Uni-Mainz.DE>.
2000-12-18 21:17:44 +00:00
thorpej
df6482a625
ALTQ'ify.
2000-12-18 20:32:08 +00:00
thorpej
cc6e5d835f
Adapt to ALTQ-related API changes (driver is not fully ALTQ'ified yet).
2000-12-18 20:23:04 +00:00
matt
9efc721402
Don't use atapi_print since if there are no wdc's, it won't be present.
2000-12-18 19:57:47 +00:00
abs
cf699a23e5
Add a 'value engineered' generic pcmcia CD-ROM drive, badged 'AMACOM'.
...
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'CD-ROM'.
I'd be encouraged at some progress towards 'generic devices', except
someone else is bound to produce something that identifies the same, but
requires a quirk. Can I go back to my sparc now?
Make two other comments consistent while here.
2000-12-18 17:21:11 +00:00
mjl
e2372c3a0b
Regen
2000-12-18 17:00:44 +00:00
mjl
ca4a96b3da
Add Avance Logic ALS100+
2000-12-18 16:55:46 +00:00
tsutsui
3bd1aace1b
Add missed le32toh() in uhci_device_isoc_abort().
2000-12-18 15:55:30 +00:00
thorpej
f41028779b
Add back the code that clears "odd" in VCHR. This shouldn't be
...
necessary, but we haven't made X cope with the wierd size yet.
2000-12-17 22:23:12 +00:00
pk
4bcb826e27
Cast a `bus_addr_t' argument to `u_long' for `%lx' format (XXX..)
2000-12-17 21:50:14 +00:00
thorpej
19c3f4691f
ISAPnP front-end for the Aironet 802.11 cards. Note this is currently
...
untested.
2000-12-17 20:34:40 +00:00
thorpej
5b67bb41a2
Regen; added Aironet 802.11.
2000-12-17 20:17:20 +00:00
thorpej
8c28f8f467
Add Aironet ISAPnP device ID.
2000-12-17 20:16:03 +00:00
bouyer
179157be03
Fix a reversed test.
...
Partial fix for kern/11726: now the kernel find the drives, but panics
after a device has been mounted.
2000-12-17 19:35:23 +00:00
ad
b5aee7bd4c
Thinko.
2000-12-17 14:46:43 +00:00
ad
3b02b279aa
Regen.
2000-12-17 13:56:19 +00:00
ad
d092cb0d0a
Sync with PixelStamp drivers.
2000-12-17 13:56:05 +00:00
ad
553c5108d4
Add wscons drivers for the DEC PixelStamp graphics accelerators.
2000-12-17 13:52:03 +00:00
jmc
2967c3fac3
In fdcattach() reset the controller before moving on as some probes (ala pnpbios) may not have reset during match
2000-12-17 07:37:31 +00:00
eeh
519aef8cf4
Make sure bits in the flags are disjoint.
2000-12-17 06:18:21 +00:00
briggs
d25ab824c8
Back out previous change. It appears to be in error. There is something
...
else that is causing the esp driver on the mac68k to fail miserably.
2000-12-17 04:38:29 +00:00
briggs
0debc0e91e
At least the 53c96 does not work with the selatn3 command. Disable it
...
for both the 53c94 and 53c96. This also addresses PR port-mac68k/11716.
2000-12-17 03:29:03 +00:00
augustss
d1c538bc2f
Don't repeat 'host controller halted' message. From OpenBSD.
2000-12-16 16:09:24 +00:00
oster
b36a1a085e
For the RF_ASSERT() and RF_PANIC() macros, call a function to do the
...
sprintf, instead of doing the sprintf in the macros. This means just
1 copy of each of the error messages, chopping about about 16K off the
size of an i386 kernel. Thanks to Simon Burge and Enami Tsugutomo
for providing the inspiration to do this.
2000-12-15 02:12:58 +00:00
lukem
146ab1ba9b
s/pio/PIO/ and s/lba/LBA/ in messages output to users
2000-12-14 23:56:18 +00:00
thorpej
8489b5e4cf
if_qflush() -> IFQ_PURGE()
2000-12-14 17:48:23 +00:00
thorpej
71cbcad899
ALTQ'ify.
2000-12-14 07:51:36 +00:00
thorpej
b0c9cd5f7b
ALTQ'ify.
2000-12-14 07:27:21 +00:00
thorpej
a64a0f8137
ALTQ'ify.
2000-12-14 07:15:45 +00:00
thorpej
64778c5e5c
XXX ALTQ (not done in 1394 layer yet).
2000-12-14 07:03:50 +00:00
thorpej
08afcfb9bd
ALTQ'ify.
2000-12-14 06:59:01 +00:00
thorpej
1646284c95
ALTQ'ify.
2000-12-14 06:42:57 +00:00
thorpej
6b16911a43
ALTQ'ify.
2000-12-14 06:27:23 +00:00
onoe
a7125e435c
Add PCI version of Aironet, not tested at all.
...
ISA/ISApnp version won't come since I don't know about isa...
2000-12-14 04:11:25 +00:00
onoe
3bfa857782
regen
2000-12-14 04:06:05 +00:00
onoe
32b5d5c3bb
add Aironet 4500/4800
2000-12-14 04:05:38 +00:00
onoe
d5dd5139a3
Support 80211NWKEY and 80211POWER ioctl.
2000-12-13 20:21:10 +00:00
enami
b31ace33b7
Add RCS Id.
2000-12-13 11:30:14 +00:00
mycroft
69d3816bec
Make this compile again. *sigh*
2000-12-13 07:35:49 +00:00
augustss
34bb7b9a35
Don't try to access a device that is being disconnected when generating
...
the detach event. Fixes (I hope) PR 11713 from itohy@netbsd.org (ITOH Yasufumi).
2000-12-13 04:05:14 +00:00
augustss
eb210eda08
Make the ohci driver not hang suspend/resume. It still doesn't resume
...
correctly. From itohy@netbsd.org (ITOH Yasufumi) PR kern/11714.
2000-12-13 03:09:06 +00:00
augustss
4df48420a1
Another Ethernet device. From nagae@tk.airnet.ne.jp in PR kern/11711.
2000-12-13 02:49:22 +00:00
augustss
9214be27c3
Regen.
2000-12-13 02:48:25 +00:00
augustss
9e199a03e6
Add another Melco LUA-TX device.
2000-12-13 02:47:26 +00:00
thorpej
c5293456da
Adapt to bpfattach() changes, and further centralize the bpfattach()
...
and bpfdetach() calls into link-type subroutines where possible.
2000-12-12 18:00:22 +00:00
thorpej
d197326e7a
Add a missing return after freeing an mbuf. From Dave Huang <khym@bga.com>.
2000-12-12 17:25:34 +00:00
onoe
aa513e6338
add support(?) for PC4500 which is a 2Mbps product.
...
Though ifconfig -m no longer show 5Mbps/11Mbps for PC4500 by this fix,
I cannot find how to set fixed transmit speed to the firmware.
FreeBSD version of driver apparently ignore the value set by ancontrol(8).
2000-12-12 05:34:02 +00:00
onoe
99675e3dde
cleanup headers: remove duplicate definition, split reg.h/var.h.
2000-12-12 05:11:15 +00:00
thorpej
c0bcfa5994
Support SIOC{G,S}80211POWER.
2000-12-12 04:04:29 +00:00
thorpej
41d6a62c1c
s/Ethernet/802.11/ when printing the address.
2000-12-12 01:32:34 +00:00
onoe
c63194c7af
To fix panic at "ifconfig an0 down",
...
define ANCACHE in if_an_pcmcia.c (XXX)
try not to access registers after interface down.
2000-12-11 23:58:55 +00:00
onoe
9c25e9208a
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD.
...
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.
Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-11 23:16:50 +00:00
thorpej
17bf4cff64
Add support for 802.11 authentication frames, required to interoperate
...
with Aviator Pro cards on Windows. Written by Steve Weiss for OpenBSD,
ported to NetBSD by me.
2000-12-11 17:53:19 +00:00
ws
8132c2a6aa
Fix the previous differently:
...
The intent was to protect the full range of ports on the board by the
barriers. But the start address was wrong. Fix it.
While here, change two other barriers to also protect the full range
(not only the nic ports), and add yet another similar barrier.
2000-12-11 17:07:38 +00:00
ad
2940363203
Report soft-errors-per-unit once per minute at most.
2000-12-11 13:19:50 +00:00
augustss
6e11678a15
Get rid of UQ_ASSUME_CM_OVER_DATA quirk; it's handled differently now.
2000-12-11 05:41:00 +00:00
eeh
af770220fa
Fix for chips that don't grok NCRCMD_SELATN3.
2000-12-10 19:25:07 +00:00
jdolecek
48f421c3fa
do not try to get/set sample rate on codecs which don't support variable
...
rate audio - always report/use fixed rate of 44100 for them, so that the
other audio code DTRT
2000-12-10 15:43:02 +00:00
castor
dac94f4d7b
Make sc->wi_txbuf an array of u_int16_t instead u_int8_t so alignment
...
is handled correctly. Thanks to Martin Husemann for nagging me to
do the right thing.
2000-12-09 22:59:44 +00:00
matt
632d2ad2ee
Don't use __hpcmips__, but hpcmips
2000-12-09 20:35:31 +00:00
mjacob
af2807f9f7
Finally fix this driver to be sensible about the ENDIAN dance. It's not
...
quite simply a question of the Qlogic being little endian and having
to have stuff swapped on big endian machines- it also has to do with the
fact that the SBus and PCI DMA layouts are wierd with respect to this.
At any rate, now finally fixed- works on Mac G4, tested it on a SS10
for sparc, checked on alpha to see if I've broken anything, and as
soon as I get another spare afternoon I'll finally install a sparc64
version which should just work (as it'll be like the Mac).
2000-12-09 08:06:31 +00:00
imp
c6e883d603
Change $Id: to $NetBSD$
2000-12-09 06:54:27 +00:00
tsutsui
fd97da6384
Add (missed) bus_dmemem_free() in rtk_detach().
2000-12-09 02:02:20 +00:00
mycroft
1ac1248e45
Turn off the damned TI `VCC protection' bit.
2000-12-08 21:51:02 +00:00
drochner
aa2b1723f5
regen
2000-12-08 18:38:15 +00:00
drochner
917a1a2bfe
add IBM microdrive
2000-12-08 18:37:24 +00:00
martin
d9d7c42e0c
Remove esp specific function from ddb when esp @ sbus is not included
...
in the kernel config. Makes compiling sbus-less kernels possible again.
2000-12-08 17:29:12 +00:00
haya
2b0374c5d9
WORKAROUND: CardBus bridge avoids turning off the power of channel in
...
shutdown hook when the bridge chip is TI113X. Because PowerBook 2400
hangs here.
2000-12-08 10:24:14 +00:00
itojun
0db3a835e2
regen
2000-12-08 08:13:45 +00:00
itojun
313bdadaa7
add STSN internet access device (no driver yet)
2000-12-08 08:13:34 +00:00
augustss
e5de940d42
Add a DIAGNOSTIC message.
2000-12-08 02:33:44 +00:00
augustss
a48cc8927a
Don't access (in core) disk label of a removable disk that is not there.
2000-12-08 02:30:51 +00:00
augustss
330a5e12fa
Don't call ether_ifdetach since we're not an ether driver.
2000-12-08 02:24:07 +00:00
augustss
dfd78cfc78
Set the debug level to 0.
2000-12-08 01:53:44 +00:00
abs
25808cb569
Wrap call to mpu_intr in NMPU - nowbuildswithout 'mpu at fms' in config
2000-12-07 14:12:30 +00:00
augustss
28ca8986f0
Regen.
2000-12-07 01:02:42 +00:00
augustss
2532d95d53
Add an Atmel hub and a Logitech mouse.
2000-12-07 01:02:12 +00:00
jdolecek
80a6068f99
add I/O Data USB-ET/T (which uses KL5KUSB101B) to the list
...
Patch sent in kern/11635 by ORI Manabu
2000-12-06 21:44:08 +00:00
jdolecek
08ab4a9ad7
regen
2000-12-06 21:39:28 +00:00
jdolecek
c3dbd34e68
add I/O Data USB-ET/T id, sent in kern/11635 by ORI Manabu
2000-12-06 21:38:03 +00:00
matt
3f127261f3
Un __P'ed.
2000-12-06 18:57:37 +00:00
mjacob
3741d38c44
Correct omission by the previous committer.
2000-12-06 06:33:56 +00:00
drochner
0d60fd2773
regen
2000-12-05 18:11:02 +00:00
drochner
ae62042f01
add some chips I met in the last weeks
2000-12-05 18:10:19 +00:00
drochner
2d8bb6f643
add some missing definitions for hungarian keymap support
...
(It won't help much since there is no way to get characters not in
iso-1 or the function key set through the vt100/sun/dumb terminal
emulations:-(
2000-12-05 17:53:46 +00:00
augustss
f680fa762c
Make sure to increment reference count while the (lengthy) opening
...
operation is happening so we don't lose on disconnect.
2000-12-05 14:01:33 +00:00
tsutsui
e8bfefe60c
- Since rtk_rxeof() was rewritten, we don't have to reserve a few bytes
...
before the Rx buffer.
- Reduce delay on EEPROM access.
- Some more cosmetics.
2000-12-05 11:11:49 +00:00
augustss
d801d9ec2b
Regen.
2000-12-05 03:12:47 +00:00
augustss
d604cf563b
Add another Epson printer.
2000-12-05 03:12:11 +00:00
oster
7a8eea351b
Fix a couple of warnings about uninitialized variables. Thanks go to
...
Frank van der Linden for pointing these out.
2000-12-05 01:35:56 +00:00
fvdl
56fd0b02d5
Avoid format warnings.
2000-12-04 20:25:40 +00:00
fvdl
245940b894
Clean up warnings in 32bit compile (bus_space_handle_t is 64bit wide
...
but will only contain 32bit values; casting via u_long is safe)
2000-12-04 20:17:10 +00:00
fvdl
e58fff48bf
Avoid compile warning on sparc64 32bit. sc_buffer doesn't seem to be
...
used at all, this line can probably be removed.
2000-12-04 20:12:55 +00:00
ad
7433fb33e8
In wsdisplay_switchtoconsole(), ensure that the switch happens
...
synchronously. Suggested by drochner.
2000-12-04 13:22:17 +00:00
fvdl
b6d9ce390e
Comment out 2 cases of unitialized variable use (only used when
...
debugging is switched on, though).
2000-12-04 11:35:46 +00:00
fvdl
d26269e0a6
'error' was not initialized in the _ioctl function, potentially returning
...
!= 0 values in the non-error case.
2000-12-04 11:18:49 +00:00
fvdl
0888965bb7
Remove uninitialized variable usage (it was redundant anyway).
2000-12-04 11:05:32 +00:00
augustss
0a739c7166
A portability define.
2000-12-04 03:38:56 +00:00
augustss
f4d0a8c54a
Regen.
2000-12-04 03:37:07 +00:00
augustss
e2925e0555
Add YAP Phone.
2000-12-04 03:36:42 +00:00
eeh
2a50931a1c
Turn on TAG QUEUE support and add some debug stuff.
2000-12-03 23:31:13 +00:00
eeh
03e0f9950a
Fix bug in non-dma select code i added.
2000-12-03 23:25:24 +00:00
jlam
9cfd45593f
Set range of memory protected by read/write bus space barriers to the
...
correct size, instead of extending past the mapped region.
2000-12-03 23:15:23 +00:00
ad
e931ce9485
Oops.
2000-12-03 15:51:53 +00:00
ad
433cc4cf9e
Nit.
2000-12-03 15:51:36 +00:00
tsutsui
311a1a842c
Clean up receive interrupt routine:
...
- Use MGETHDR + MCLGET + memcpy rathar than m_devget + m_adj + m_copyback.
- Call bus_dmamap_sync(9) correctly for Rx buffer.
Mostly from thorpej's if_rtp.c.
2000-12-03 14:24:17 +00:00
ad
3bcc9b9f3a
Fix a comment.
2000-12-03 13:34:37 +00:00
ad
9ecde86321
I2O HBAs provide an abstracted view of the bus; use SCBUSIOLLSCAN to give
...
them an oppertunity to re-scan it before we do.
2000-12-03 13:30:36 +00:00
ad
af9d4c4fa4
- Only configure un-claimed devices. Implement re-configuration.
...
- Adhere to the spec better in some places. Also, work around some quirks
noted in the Linux I2O code.
- Register event handlers for the executive and RBS devices.
- Fix a number of buglets and tidy a little.
- Implement a message pass-through interface and some other useful ioctls.
2000-12-03 13:17:03 +00:00
ad
1e6732dca4
- Force the memory mapping uncacheable.
...
- We don't need a record of the I/O space mapping.
2000-12-03 13:05:14 +00:00
ad
a5248b66cf
Make it possible to detach ld devices.
2000-12-03 13:03:30 +00:00
ragge
8dcc655ab0
Remove lkc, add lkkbd/lkms.
2000-12-02 17:19:27 +00:00
ragge
47dabcfc3f
Support files to use wskbd/wsmouse on VAXen with DZ-like chips.
...
From Matthew Fredette (fredette@MIT.EDU ).
2000-12-02 17:03:55 +00:00
ragge
23eb2da75d
Accept the "Utför" key as a giant ctrl-alt key. On LK201 "Ctrl" and
...
"Compose" cannot be pressed at the same time.
2000-12-02 16:57:41 +00:00
fvdl
2b69243845
Add AHC_NO_TAGS option to switch off tagged queueing. Done because
...
tagged queueing has a severe performance impact (60%) on write
throughput with UBC. Needs investigation.
2000-12-02 14:53:01 +00:00
augustss
a51ea43fd6
Make this compile again (on i386).
2000-12-01 04:37:54 +00:00
pk
d736ce5086
We don't need <sys/proc.h>, <sys/user.h> and <machine/cpu.h>.
2000-11-30 23:21:39 +00:00
pk
55fa60c3e5
De-__P().
2000-11-30 23:12:43 +00:00
pk
58b6f2ef7d
KNF patrol && De-__P().
2000-11-30 23:06:44 +00:00
pk
03903e1da8
KNF patrol.
2000-11-30 23:01:03 +00:00
thorpej
ec15125b5b
Don't restrict I/O space to 16-bits on the Promise Ultra/33 boards.
...
Empirical evidence suggests that the board works just fine with
an I/O address >= 0x10000.
2000-11-30 18:11:40 +00:00
tsutsui
786dc5161c
Clarify RX status header length and some cosmetics.
2000-11-30 15:51:57 +00:00
tsutsui
fd4d074b27
After rev 1.16 rtk driver uses the CRC from the chip,
...
so no need to adjust Rx address for it. Fixes kern/11301.
2000-11-30 15:33:04 +00:00
thorpej
64222ad03a
Fix some printf formats, and remove SPARC-specific debugging stuff.
2000-11-30 14:41:46 +00:00
pk
7006bcd449
Fix two cases of reversed arguments to printf();
2000-11-30 09:58:03 +00:00
enami
99a39489d8
Pass the right size of object (in this case, a trailer) to fwohci_buf_pktget.
...
Since the fp_trail is a pointer to trailer, we have to pass sizeof(*fp_trail)
instead of sizeof(fp_trail).
2000-11-30 06:59:08 +00:00
enami
a89beb967d
Make this file compiles on alpha even if FW_DEBUG is defined.
2000-11-30 06:42:26 +00:00
enami
4792308b32
Pass the right max segment size to bus_dmamap_create.
2000-11-30 06:36:43 +00:00
eeh
9e7aa98aa6
Add TAG QUEUE support to the ncr53c9x driver.
2000-11-30 00:19:25 +00:00
thorpej
14f5ab8928
ANSI'ify.
2000-11-29 18:22:17 +00:00
wiz
972c941cf6
Fix typo in comment reported by Tetsuya Isaki in kern/11587.
2000-11-29 12:49:56 +00:00
matt
435b4c7b35
Fix c896 support. If the first mem bar is 64bit, then the second one will
...
be too. And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
2000-11-29 02:00:38 +00:00
thorpej
454f740bd4
Use AC97_REG_* constants rather than defining them ourselves.
2000-11-28 16:57:16 +00:00
thorpej
997701c6c1
Define additional AC'97 registers.
2000-11-28 16:54:17 +00:00
haya
92f11ef3d3
BUG FIX: change enable sequence for 16-bit pcmcia cards. This change
...
provides better (not perfect) reset sequence. The most significant
change is asserting output enable reg before power up. Stop routing
interrupt during reset.
2000-11-28 09:11:36 +00:00
thorpej
443bd6369f
Device driver for the built-in audio on Intel ICH, ICH0, ICH2,
...
and i440MX chipsets. Based on a driver by Michael Shalayeff,
modified somewhat by me to use bus_dma properly, and fix some
audio encoding emulation bugs.
Thanks to Manuel Bouyer for testing and feedback.
2000-11-28 05:12:29 +00:00
matt
1aa6c9fb10
Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel
2000-11-27 21:51:02 +00:00
haya
02aaf95f67
BUG FIX: pccbb turns off PC Cards' power on the bus in shutdown hook.
...
Some machines cannot reboot without this fix.
2000-11-27 09:04:32 +00:00
chs
aeda8d3b77
Initial integration of the Unified Buffer Cache project.
2000-11-27 08:39:39 +00:00
thorpej
25491e6a22
Power management (well, suspend/resume) is now implemented. Remove
...
it from the TODO list.
2000-11-27 02:37:14 +00:00
sommerfeld
248928c7cf
Add a powerhook to reload AC97 registers after a resume.
...
Sound now works after suspend/resume on my Sony PCG-Z505S
2000-11-27 01:56:53 +00:00
augustss
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
augustss
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
augustss
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
ad
04a83acaf7
lsu -> ld
2000-11-26 19:24:24 +00:00
ad
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
ad
ee170a5528
Avoid a possible stall.
2000-11-26 16:16:04 +00:00
takemura
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
simonb
d76cf8b502
Add multiple include detection - all userland installed headers are now
...
safe.
2000-11-26 06:03:24 +00:00
christos
12269bd46c
Don't try to use ultra-dma on sis chips with revision 0xd0. It loses
...
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
2000-11-26 04:59:18 +00:00
nisimura
2e93099aff
Replace sfb_copycols() which can run better job in some degree.
...
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
2000-11-25 11:43:42 +00:00
tsutsui
1e1862bc57
Add another font from 4.4BSD-Lite2/luna68k.
2000-11-24 15:47:15 +00:00
nisimura
b974ee7790
Add TC option card descriptions, which are commented out before NetBSD/pmax
...
yields local implementations to them.
2000-11-24 05:02:26 +00:00
chs
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
chs
f6b62f776c
avoid division and remainder operations for devices where
...
the sector size is DEV_BSIZE (ie. practically everything).
2000-11-24 00:17:35 +00:00
nisimura
0661e6718b
- fix an error in uninitialized variable reference.
...
- add a missing function argument declaration.
- minor comment adjustments.
2000-11-22 06:59:08 +00:00
soren
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
soren
a622a1b6d2
Remove obsolete comment.
2000-11-22 00:32:24 +00:00
tsutsui
690b28f91e
Add a couple of fonts used on Sony NEWS.
...
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
2000-11-21 11:44:45 +00:00
nisimura
ce10334de9
Fix errors in color lookup table initialization. Glyph is rendered
...
in visible color now.
2000-11-21 07:42:02 +00:00
soren
290a66c213
Reduce probe noise.
2000-11-21 05:23:37 +00:00
soren
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
soren
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
soren
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
soren
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
soren
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
soren
e38c89a886
s/iRDA/IrDA/
2000-11-21 00:20:30 +00:00
jdolecek
1964a728da
add moxa
2000-11-20 19:27:16 +00:00
jdolecek
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
onoe
2819c7b688
Use DMA from mbuf instead of copy in transmit.
...
Still use memcpy in receiving because we must use buffer fill mode
and many packets may share single receive buffer.
XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).
Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.
Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
2000-11-20 12:12:18 +00:00
chs
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
onoe
4e1e677996
regen.
...
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:23:13 +00:00
onoe
e51b1f604e
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:22:13 +00:00
bouyer
d81861796a
Add support for Intel ICH2
2000-11-19 15:32:24 +00:00
sommerfeld
acc196c4a9
Initialize ring buffer pointers when the ring buffer is allocated.
...
(comsoft() can be invoked before comopen() on serial consoles; a character
received before the console is opened "for real" can result in a fatal trap
unless the ring buffer pointers are initialized early)
2000-11-18 15:46:23 +00:00
thorpej
0aea00f57c
Regen.
2000-11-18 05:29:27 +00:00
thorpej
cec0022eeb
Add some 3D Labs products, from XFree86, via groo@netbsd.org
2000-11-18 05:29:00 +00:00
bouyer
1e533cd38c
Pull up FreeBSD changes:
...
1.39:
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.
1.33:
Add support for the Netgear GA620T copper gigabit card.
1.32:
Tweak probe message so that 1000baseSX and 1000baseT cards are
explicitly identified.
1.31:
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.
NetBSD changes:
get rid of ti_inuse, the mbuf ref counting code should call ti_free() when
needed.
Use hardware 802.1q support.
2000-11-17 19:33:25 +00:00
bouyer
54e36dbaa6
Update to firmware 12.4.13+wpaul, from FreeBSD
2000-11-17 19:23:35 +00:00
bouyer
42681a6a9f
Supports ETHERCAP_VLAN_MTU. Tested on sbus hme on Ultra/1.
...
Thanks to Andrei Petrov for the hint !
2000-11-17 19:08:00 +00:00
jdolecek
4046a1bd78
if AC97_CODEC_DOES_VRA is not supported, only print warning than
...
hw Variable Rate Audio is not supported and continue attaching the driver.
This is I believe more correct than what was done in rev 1.5
2000-11-15 21:06:33 +00:00
augustss
ef36370776
Regen.
2000-11-15 14:36:50 +00:00
augustss
d57ee8b358
Add Sony memory stick.
2000-11-15 14:36:09 +00:00
pk
503701f0d3
OF_nextprop: make OUT argument type `void *'
2000-11-15 14:27:26 +00:00
thorpej
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
matt
c0122f4013
Add fwlynx PCI attachment
2000-11-14 23:40:44 +00:00
matt
ffd7494144
Add openfirm
2000-11-14 23:37:58 +00:00
matt
617742b256
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-14 23:37:20 +00:00
matt
1936d0565a
some cleanup. Add back OFIOCGETOPTNODE.
2000-11-14 21:10:05 +00:00
matt
a790bc7690
Add OFIOCGETOPTNODE (now that I know how to implement it).
2000-11-14 21:07:26 +00:00
itojun
99fac6ed3e
need uvm/uvm_extern.h for PAGE_SIZE
2000-11-14 19:44:34 +00:00
thorpej
cfe0892ed3
NBPG -> PAGE_SIZE
2000-11-14 18:42:55 +00:00
thorpej
60f33f91c2
Pull in <uvm/uvm_extern.h>
2000-11-14 18:35:10 +00:00
thorpej
275539f03c
NBPG -> PAGE_SIZE
2000-11-14 18:21:00 +00:00
bouyer
34a57dc139
Regen.
2000-11-14 16:20:55 +00:00
bouyer
41e8f20175
Add Alteon and netgear 1000baseT variants of the gigabit ethernet adapter.
...
From FreeBSD
2000-11-14 16:20:20 +00:00
augustss
1ae6bcbbf0
Acerscan 320U doesn't do strings right. From FreeBSD.
2000-11-14 15:33:04 +00:00
augustss
ab324086df
Set the open flag when opening the scanner.
2000-11-14 13:57:16 +00:00
onoe
f1c77e81db
Add support for link fragmentation and reassemble for IEEE-1394.
...
XXX: drain is still not yet implemented, thus memory leak will occur
in case of any of fragment lost.
2000-11-14 11:14:55 +00:00
pk
fbf62501af
Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only.
2000-11-14 08:52:35 +00:00
matt
7d085e8e51
Add openfirmio which is an ioctl interface to OpenFirmware.
2000-11-14 06:45:54 +00:00
matt
3b275bc230
Add OF_nextprop and OF_setprop prototypes.
2000-11-14 06:44:12 +00:00
matt
1365092255
de __P'd.
2000-11-14 06:42:27 +00:00
pk
4c54ce2034
Define ncr53c9x_ioctl() and use it to start sync negotiation.
2000-11-13 15:24:22 +00:00
bouyer
089961e7c5
- use jumbo rx if mtu is too big to fit in one mbuf, not when larger than
...
ETHERMTU.
- add support for ETHERCAP_VLAN_MTU.
2000-11-12 18:32:43 +00:00
pk
ad9bda9339
Change `nvram size' data type to `bus_size_t'.
2000-11-11 11:59:42 +00:00
pk
035ceca5b2
Add note about time-of-day and interval timer programming on this chip
...
are combined into the same (write-only!) control register.
2000-11-11 11:18:07 +00:00
pk
526def8fd1
Add a function to retrieve the size of the on-chip NVRAM area.
2000-11-11 11:03:31 +00:00
augustss
6836c0bd28
Update frlengths after a isoc transfer.
...
Suggested by Yuri <yuri@tsoft.com>
2000-11-10 14:11:49 +00:00
augustss
1bfab105b0
Don't try to set CM_OVER_DATA feature if features cannot be set.
...
From Ryutaroh MATSUMOTO <ryutaroh@ss.titech.ac.jp> in PR # 11428.
2000-11-10 14:08:32 +00:00
augustss
0510b1739c
Update documentation link. From OpenBSD.
2000-11-10 13:53:23 +00:00
augustss
9a10107274
Some OpenBSD defines. From aaron@monkey.org
2000-11-10 13:52:28 +00:00
enami
da071ce468
Remove lonely splx in fw_detach.
2000-11-10 03:45:09 +00:00
hubertf
a7398324e3
Regen for ELSA WaveLan IDs
2000-11-10 01:03:29 +00:00
hubertf
e00d559554
Add ELSA WaveLAN card & a noname clone(?)
2000-11-10 01:02:32 +00:00
ad
c8c52e320a
Match controllers hiding behind a Symbios 53c1510; thanks to Jonathan Lemon
...
<jlemon@flugsvamp.com> for providing clarification.
2000-11-09 18:19:40 +00:00
itojun
611c77c7df
unused variable
2000-11-09 17:20:24 +00:00
ad
01dc7ef4f3
TODO
2000-11-09 15:04:55 +00:00
ad
0129c52c7d
- A few minor changes (typos and the like).
...
- Use SPLs in iop_msg_send() and not the interrupt mask - it accesses
shared resources lower down.
2000-11-09 12:51:36 +00:00
ad
9a41c41bed
Install only headers that are useful to userspace (ioctl interface is not
...
finished, but will be here soon).
2000-11-09 12:34:05 +00:00
eeh
71b0c155a0
Support for MI console magic framework.
2000-11-08 23:41:42 +00:00
eeh
faa5920bd2
Use the MI console magic sequence framework.
2000-11-08 23:13:03 +00:00
ad
45b672fb47
Add iop, iopsp.
2000-11-08 19:56:20 +00:00
ad
5854b30016
Add glue for iop.
2000-11-08 19:46:27 +00:00
ad
3785a081f1
Recurse into i2o/.
2000-11-08 19:45:49 +00:00
ad
d49fd13524
Add support for I2O adapters and SCSI/FC-AL/BSA class devices. This needs
...
more testing with different configurations, and work in a number of areas
(which I'm not able to do for a little while), but is at least functional
and stable on i386 with DPT adapters.
2000-11-08 19:45:30 +00:00
matt
918971bc20
Initial import of some of the definitions for the Serial Bus Protocol V2.
...
Which is used for SCSI over IEEE1394.
2000-11-08 19:27:08 +00:00
ad
891c4efd74
- Pull in some updates from FreeBSD - mainly clarifications. Thanks to
...
Mike Smith <msmith@freebsd.org> for pointing these out.
- Ensure that we get AENs: reserve one CCB/command block for parameter
retrieval, and chain AEN retrievals that are the result of an interrupt.
2000-11-08 19:23:50 +00:00
ad
142ab5b1ec
Move lsu stuff to more logical locations, and push queueing into the lsu
...
driver.
2000-11-08 19:20:33 +00:00