0b4e481612
add "mii" to vr driver.
1999-02-09 02:04:36 +00:00
d0ab43c887
Oops. Need to have VOP_LOCK before calling uvm_vnp_terminate, not after
...
(comments and code inspection in uvm_vnp_terminate agree on this).
1999-02-09 01:57:05 +00:00
1a911bb798
roll internal release level
1999-02-09 00:54:07 +00:00
3c21a2493b
Roll internal release tag. Print out if we're in a 64 bit PCI slot.
...
Use fast memory timing NVRAM parameter. Clean up and fix establishment
of default target parameters. Don't use NVRAM if are flagged as not to
do so (I had a busted NVRAM setup which I couldn't edit that enabled SYNC
mode but disabled disconnect/reconnect and wide!!). Fix delays after
resets. BUS resets not done in isp_init anymore- relegated to OS
specific outer layers. Fix a buglet where you can get in a loop for
a NULL xs in the completion list in isp_intr. Add in some defines that
can disable fast posting. Add in code for Loop Up/Loop Down events that
call into the outer layers as to what to do.
1999-02-09 00:52:23 +00:00
0cf98e4e12
Roll internal release tag. Roll core version minor. Fix broken DPARM_DEFAULT
...
define. Add a new config flag param (ISP_CFG_NONVRAM) whose intent it is
to cause NVRAM to be ignored. Add ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP
isp_async enums.
1999-02-09 00:46:25 +00:00
d8d9458410
fix a couple of NVRAM defines
1999-02-09 00:44:42 +00:00
c1adc949c2
roll internal release tag
1999-02-09 00:44:06 +00:00
6a8ebccd6a
Do SCSI Bus resets in this layer (now). Don't do it for Fibre Channel yet
...
(we get LOOP DOWN events, and we'll hang on that at this time).
Add other isp_async cases- ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP. DOWN
will cause internal queuing until UP, whereupon a timeout will fire up
any pending xfers. It doesn't really keep commands from getting destroyed
by loop down events, but at least minimizes the damage. This was much
easier to implement with CAM.
1999-02-09 00:42:22 +00:00
ee45547dde
Roll platform revision level. Add blocked flag and waitq to osinfo structure.
1999-02-09 00:37:35 +00:00
c47d6855db
clean up pci configuration a bit
1999-02-09 00:35:35 +00:00
e8690f9bd1
Fix ESS/SB confusion for 1868 and 1869 chips: because isapnpdevs is parsed by an awk script, you *must* comment out each line separately, which is why ess was still trying to attach chips it couldn't cope with. Note that this leaves isapnp ess with no matches -- shouldn't the 188X be in here? Also, add another isapnp PCIC.
1999-02-08 22:10:09 +00:00
c9f76153fa
Add some missing newlines in printfs.
1999-02-08 19:37:29 +00:00
f6f9f8a965
Change DIOCEJECT to do what's needed to eject a device before the eject
...
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
1999-02-08 16:33:16 +00:00
1e0e78854a
There's no ATA draft where it is required for the drive to set DRDY | DSC when
...
the disk is ready to transfer data, and in ATA-5 the DSC has been obsoleted.
So only wait for DRQ to transfer data. This can be made conditional on the
ATA version if it's proven to break with some drives (worked with all the
drives I have access to).
While I'm there correct a few typos.
1999-02-08 15:22:28 +00:00
999d27da77
Don't bother copying output queue into automatic buffer; instead, pass
...
contiguous chunk of outq to emulation routine. Fix based on patch
from M. Drochner, modified to call output routine once with each
contiguous chunk when the ring buffer wraps around.
1999-02-08 14:48:07 +00:00
cd010c972c
Oops, last change is wrong...
1999-02-08 14:32:00 +00:00
f96a373094
Avoid "unterminated character constant" error from mkdep (really cc).
...
I guess in some sense it's stupid to use cc to depend .S files.
1999-02-08 10:45:11 +00:00
95ee03319d
Change WSDISPLAYBURST from OBUFSIZ-1 to OBUFSIZ*4, for a ~15x
...
improvement in the "cat /usr/share/misc/termcap" benchmark on 486/75
ttwrite queues data for us in OBUFSIZ chunks. If we only consume
OBUFSIZ-1 bytes per call to wsdisplaystart(), we're *guaranteed* to
fall behind when given maximum-sized reads (which will defer
processing the leftovers until ttrstrt gets called, after a timeout)
Note that OBUFSIZ*4 may be overkill; OBUFSIZ*3 may be sufficient to
get maximal performance; OBUFSIZ*2 resulted in only about a 2.5x
performance improvement, but it's 2am and I've done enough tweaking
for the night.
1999-02-08 07:05:51 +00:00
1461618ead
Make this compile for SUN4 only.
1999-02-08 00:13:20 +00:00
0d3a9dfce7
Don't bring scsi/atapi common files in under the "atapi" attribute.
...
Bring them in under atapibus since they're not needed unless something
attached to an atapibus is also attached.
Tested on i386 and arm32.
1999-02-07 22:58:43 +00:00
d30ef27fb0
s/ELF/__ELF__/
1999-02-07 20:21:09 +00:00
2fefe24803
Remove "lib" directory only during "make cleandir" so that ".depend"
...
doesn't get nuked during "make clean".
1999-02-07 18:25:54 +00:00
b2c4a7b933
use mi data conversion functions, simplify inittodr() and resettodr()
1999-02-07 17:29:26 +00:00
36be191753
-pull in mi date conversion functions
...
-include files.vme (not worth much normally, but makes it easy to
plug in something)
1999-02-07 17:25:31 +00:00
636b3ee69b
s/JUMP/JMP/ like every other arch.
1999-02-07 17:20:00 +00:00
0f145938b4
put all century related code into an own function clock_expandyear(),
...
touch the CMOS century byte only if the CMOS contents passes a
checksum test which qualifies it as "known compliant"
1999-02-07 16:18:00 +00:00
cc5f9932f8
Issue SCSI reset on initialize.
...
Clean unused mha_reset.
1999-02-07 15:18:58 +00:00
08c7376961
Remove "lib" directory created during build process while doing
...
"make clean" or "make cleandir".
1999-02-07 13:39:36 +00:00
c9d036d796
defopt MEMORY_DISK_{HOOKS,SERVER,IS_ROOT}.
1999-02-07 09:34:58 +00:00
3fa9c3ec91
garbage-collect `options MULTICAST'. IP multicast is no longer an option.
1999-02-07 07:14:21 +00:00
ac38e160d1
Add `strip' line for testing Ricochet modems at 115200 bps.
1999-02-07 07:12:19 +00:00
6eedee5c9d
Add entropy gathering.
1999-02-07 01:54:50 +00:00
9332e61aae
Define _STANDALONE instead of STANDALONE.
1999-02-06 23:17:07 +00:00
892e4f60af
One more small step towards a unified m68k pmap:
...
use the common pmap_copy_page() and pmap_zero_page (copied from Atari).
1999-02-06 22:48:08 +00:00
ad268a2ff8
STANDALONE -> _STANDALONE.
1999-02-06 21:19:24 +00:00
5542a949cd
Config for for an AS200 with TGA/WSS/PCMCIA (although the TGA and PCMCIA aren't
...
fully functional yet).
1999-02-06 20:22:43 +00:00
d1276ebc65
Make this compile. (and sync with dev/ic completely)
1999-02-06 20:04:31 +00:00
bce7f71843
sort the dependencies between terminal devices a bit and add consistency
...
checks to catch conflicting devices at compile time
1999-02-06 18:46:21 +00:00
90d5be7726
Add missing minherit() declaration.
1999-02-06 16:14:52 +00:00
aae389c323
STANDALONE should be _STANDALONE
1999-02-06 15:20:26 +00:00
c4bc93ad94
Define _STANDALONE instead of STANDALONE.
1999-02-06 13:34:15 +00:00
47bc7c51b7
rewrite usage of tailp slightly, to convince gcc that it really isn't used
...
initialized.
1999-02-06 11:57:35 +00:00
6b77f11d67
put in better name/description for Simon G's board
1999-02-06 06:55:15 +00:00
04046c6dd7
add code to cope with multiple ports per BAR, as are found, for instance,
...
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
3bf59302e9
Workaround for disks that respond slowly to selection, provided by
...
David Jones in PR #3769 .
Every day, I hate this driver more and more.
1999-02-06 03:30:32 +00:00
23382bdfcb
Regen.
1999-02-05 22:55:40 +00:00
0955479f29
Add some Olicom Ethernet device IDs, from FreeBSD's tl driver.
1999-02-05 22:55:19 +00:00
7ebd19d744
According to Dave Borman, the iss should be using snd_nxt and not rcv_nxt
...
(from tcp_impl mailing-list).
1999-02-05 22:37:24 +00:00
6a75ade4bc
The x86 does not have strict alignment requirements, so define
...
__NO_STRICT_ALIGNMENT here.
1999-02-05 22:13:12 +00:00
d95d5b1488
Make this driver work on the Alpha. Apparently the receive DMA mechanism
...
has the same 4-byte alignment requirement that the transmit side does. This
causes the packet payload to be misaligned. So, on systems which require
strict alignment, we must copy the incoming frame to a new packet buffer,
suitably aligned.
1999-02-05 22:09:46 +00:00
b52d1e44d0
Fix the interrupt handler to actually acknowledge the interupt to the
...
dispatch code (!!!). How did this work even on the i386 before?
1999-02-05 21:20:31 +00:00
58beb19c16
Regen.
1999-02-05 20:20:04 +00:00
53089c1ade
Add oui for Davicom Semiconductor, and add Davicom DM9101 10/100 PHY.
1999-02-05 20:19:44 +00:00
ca083f6095
Sync with libc version.
1999-02-05 16:34:13 +00:00
dde3694c4c
Fix some formatting nits.
1999-02-05 08:42:03 +00:00
82a54250be
Remove some duplicate softc members, and comment some of the softc
...
fields.
1999-02-05 08:27:46 +00:00
8bf66d3eb2
Remove some unnecessary splnet's.
1999-02-05 08:21:31 +00:00
50faf19d7d
splimp -> splnet
1999-02-05 07:53:24 +00:00
adc9c40688
Use the generic MII support code, not our own.
1999-02-05 02:58:38 +00:00
f9467ddb8e
Some PHYs are really braindead, and report incorrect IDs. Simplify the
...
test for this, and probe for PHYs based on media in the BMSR.
1999-02-05 02:46:34 +00:00
ebf3a97519
Use MII command opcodes from <sys/dev/mii.h>
1999-02-05 01:17:24 +00:00
eade8dcad9
Don't use ess driver for ESS186[89], it doesn't work.
1999-02-05 01:15:01 +00:00
909b90d2d4
Rename VR_MIICMD_DATAIN and VR_MIICMD_DATAOUT to actually match what the
...
data sheet says. (The names and their usage were exactly reversed in the
code.)
1999-02-05 01:10:30 +00:00
0014588545
Phase 2 of the RAIDframe cleanup. The source is now closer to KNF
...
and is much easier to read. No functionality changes.
1999-02-05 00:06:06 +00:00
25d32ef34d
REALLY only update the window when we get an ACK. (the old code seemed broken)
1999-02-04 22:58:37 +00:00
8ef63cdb2c
Print some more info in pmap_alloc_physpage() if no pages are available,
...
and enhance some DIAGNOSTIC messages.
1999-02-04 19:49:22 +00:00
390864a7a5
Define a macro which has human readable strings corresponding to PGU_*
...
constants.
1999-02-04 19:48:21 +00:00
2633b97c02
regenerate from template
1999-02-04 19:19:38 +00:00
c5e0224025
In the future, the AMIGA and DRACO example files will be generated from
...
GENERIC by make in this directory. This way, they hopefully will stay
up-to-date.
1999-02-04 19:01:37 +00:00
7177191d30
Allocate DMA-aware memory area using "dma-alloc" method and use them
...
for data buffer.
XXX currently only netif_put() uses this.
iMac can use ofwboot.elf now.
1999-02-04 15:41:15 +00:00
50217a8b50
Check for _STANDALONE as well as _KERNEL to make it compile again. Fold
...
some includes together in one #if as a result of this.
1999-02-04 15:26:42 +00:00
78094a09f1
Uncomment PCI-PCI bridges.
1999-02-04 15:04:58 +00:00
630abfea00
Add PCI-PCI bridge support for Bandit.
1999-02-04 14:54:00 +00:00
46660b394f
Make ptable really aligned to HTABSIZE.
1999-02-04 12:45:31 +00:00
610a648c7d
Use "local-mac-address" property to get MAC address.
1999-02-04 12:14:24 +00:00
24729226e5
sync with userland
1999-02-04 05:36:36 +00:00
cf932f7d39
Install sha1.h in /usr/include/sys, but make a symlink from /usr/include, just like is done for md5.h.
1999-02-04 04:36:10 +00:00
0c7afe477d
Separate the tiocm code into functions, like the z8530 code, and fix the same
...
DTR bug.
1999-02-03 23:57:27 +00:00
568f4aa704
Minor changes to tiocm code.
1999-02-03 23:51:06 +00:00
6db0ff6627
Update last prototyping change.
1999-02-03 23:40:22 +00:00
9be96dda95
Fix an inconsistency: PPS was turned off on first open, but the mode may have
...
still claimed it was enabled.
1999-02-03 23:22:11 +00:00
535f59cc81
Slight redux in PPS code.
1999-02-03 23:20:33 +00:00
3e0d6eb0b4
overhalt of scsi driver.
...
it still probes the disks ok, but is having trouble with 0xdeadbeef
in buffers read from the disk. Suspected problems with DMA alignment
and toggling the secret ninja dma control register
1999-02-03 20:44:43 +00:00
be1af660c0
Don't set DCD_IE in the frontends. KGDB doesn't even use DCD, and the tty
...
frontends get it from zsparam() anyway.
1999-02-03 20:25:05 +00:00
b3a56d0097
Catch up with a change to the stint interface.
1999-02-03 20:22:28 +00:00
54f0a0ae81
Clone changes from the version in dev/ic. (These should be merged!)
...
Note: NOT tested on this port yet.
1999-02-03 20:19:08 +00:00
b63b0fd80b
Redo the N previous changes, plus a couple of other things:
...
* Move the printf() delay to just after the printf(), where it actually makes
sense.
* Use zstty_stint() and zstty_softint() from zsparam(), to force an immediate
update of the carrier and flow control status. Abuse this in the attach and
open functions to defer all of that work. This insures that we don't lose
any status updates.
* Don't screw with register 1 when closing the console.
* Fix bugs in TIOCM??? (stay semicolon, clearing DTR while transmitting).
* Add comments in a couple of places.
1999-02-03 20:15:51 +00:00
4553ce553c
use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h>
1999-02-03 06:03:37 +00:00
1f5b9b4d63
sprintf->snprintf
1999-02-03 05:05:03 +00:00
de35d7228d
fix compiler warning
1999-02-03 01:16:20 +00:00
4bd6ed2a8b
Make this pass the `strict prototype' test.
1999-02-02 22:23:44 +00:00
e6c245c5df
Implement pmap_prefer() for systems w/ an HP MMU (which has a virtually-tagged
...
cache). This helps to avoid cache alias problems, and can improve performance
in the case where physical pages have multiple mappings (since the pages will
not have to be marked cache-inhibited).
1999-02-02 21:06:55 +00:00
f108f0164e
Nuke the "pmapvacflush" debugging code.
1999-02-02 20:52:21 +00:00
8befad84b1
Remove SCCS markers and make these compile in $NetBSD$ IDs.
1999-02-02 19:57:30 +00:00
269cb58003
Remove the sccs[] hack (which has broken twice now) and just make sccs[]
...
and version[] separate strings. (Other alternative hacks proposed may also
break in the future.) We don't make version a pointer into the sccs string,
because that would require changing programs that kvm_read() it, and break
backward compatability.
1999-02-02 19:40:47 +00:00
13daba04a1
Another giant change: Allocate register space dynamic instead of compiled-in.
...
This is done on a physical page size basis, instead of virtual (as the
(on vax yet non-existing) bus_* routines does). This is similar to the
way uba allocation is done.
1999-02-02 18:37:20 +00:00
5888b4354e
channel_map is called before setup_chip, so whe need to enable the channel
...
status bits in acer_channel_map().
1999-02-02 17:06:05 +00:00
68c9ce2c96
Don't use BAT register. (not needed now.)
1999-02-02 16:48:17 +00:00
a4de4218fd
Use private (its own) segment registers in Open Firmware call,
...
instead of BAT register.
1999-02-02 16:47:08 +00:00
ef69721044
findroot() now recognizes network devices.
1999-02-02 16:37:51 +00:00
378f49eff8
Ensure lowest 256MB is mapped by BAT0.
1999-02-02 16:29:25 +00:00
1123e3e286
Mention pciide(4).
1999-02-02 16:18:17 +00:00
ca240ca7b5
Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing
...
the code, and to Takahiro Kambe who run several tests and finally found the
bug by himself :)
1999-02-02 16:13:59 +00:00
f41cded075
make dma flushing more efficient and avoid stray interrupts when not using polled io.
...
remove check for normal chaining interrupts and add check for combined chaining interrupts
only when used with a tail chain. This allows scsi to work for short unaligned buffers
and large aligned buffers.
1999-02-02 14:04:53 +00:00
0075c51a23
Bump CDRETRIES to 4. Now if a DMA error occurs, the driver should downgrade
...
to PIO mode and the command be retried properly.
1999-02-02 13:02:49 +00:00
c0e7b6c5cb
If sense_key == UNIT_ATTENTION and ASC/ASQ == "Power On, Reset, or Bus Device
...
Reset", retry the command instead of returning an error. XS_RESET is useless
without this, as the retryed command will die with this unit attention.
1999-02-02 13:01:36 +00:00
0c8f3a4f31
Don't use obsolete sgtty crap.
1999-02-02 13:00:19 +00:00
2bf6a99afb
For IDE/ATAPI protocols botches, reset the bus and return XS_RESET
...
instead of XS_DRIVER_STUFFUP.
1999-02-02 12:59:31 +00:00
d97559225c
Removed some already commented out test code.
...
added debugging printout when invoking polled dma interrupt.
1999-02-02 12:46:13 +00:00
2667a4b26f
Fix typo.
1999-02-02 10:00:18 +00:00
fbfe12046d
Trivial asm-level optimizations.
1999-02-02 09:16:52 +00:00
a350d7b28b
Set the tunnel destination address correctly. Should fix PR #6899 .
1999-02-02 07:20:13 +00:00
5f688e6632
remove gre_softc declaration; the symbol is no longer used in this
...
file.
1999-02-02 07:10:45 +00:00
14ec3b84b7
Bracket calls to Debugger() with #ifdef DDB (won't compile otherwise;
...
the prototype isn't there without DDB).
1999-02-02 04:57:11 +00:00
5ef478be57
Fix some egcs compiler warnings (from Patrick Welche).
...
Closes PR6925.
1999-02-02 04:02:26 +00:00
05cbb33e4c
Use pcidevs.h to get vendor and product IDs.
1999-02-02 00:32:21 +00:00
b6a84f08e8
Take software-only structure definitions out of the register description
...
header.
1999-02-02 00:29:17 +00:00
bb5edf7345
Remove support for FreeBSD from the driver; so many changes are going
...
to be required to make it properly portable to all of NetBSD's platforms,
that it just wouldn't be worth the effort.
1999-02-02 00:05:02 +00:00
2bdfbafc37
Minimal changes to make this compile on the Alpha. Much more work is
...
needed to make this a truly portable driver.
1999-02-01 23:40:22 +00:00
899ac42bec
Fix bug exposed by new "mkdep" program:
...
"${SFILES}" is empty so that "cc" will fail with "No input files"
during "mkdep".
1999-02-01 23:18:56 +00:00
1ccaf05ff1
add CPU_SUN4U, to make libkvm compile.
1999-02-01 22:20:02 +00:00
9231ba8603
- make sure that sc->handle[i].flags is initialized in all cases
...
- check PCIC_FLAG_SOCKETP before disabling the CSC_INTR.
1999-02-01 22:17:05 +00:00
437e1d2f00
sync with libc version
1999-02-01 21:35:36 +00:00
38e33af591
Enable DDB, but with DDB_ONPANIC=0.
1999-02-01 16:16:52 +00:00
5e373d307f
Clear mfchashtbl after it's deallocated, to kill a stray pointer. Fixes PR
...
5400.
1999-02-01 15:09:46 +00:00
f6955fc60b
Fix return value in interrupt routine so that dma gets flushed correctly.
...
Turn on the esp_match since polling the scsi bus now works.
1999-02-01 12:53:48 +00:00
9ec88780aa
size_t and void*-arithmetic changes from sys/libsa/ufs.c.
1999-02-01 03:08:05 +00:00
45f13be5cb
use memcpy, not bcopy, for non-overlapping copies.
1999-02-01 02:46:59 +00:00
22cbe4abc1
Add a comment that the bcopy #define that uses the PROM's memset don't
...
handle overlapping copies. From Jonathan Stone.
1999-02-01 02:18:46 +00:00
a3793dc8e8
Add a missing tab for cosmetic purposes.
1999-02-01 01:36:21 +00:00
52bd8c333b
- Nuke USPACE for now-defunct 'nullproc' pcb (8KB saving).
1999-02-01 00:32:18 +00:00
36c50aaa14
Add the patch I floated on tech-kern. Andreas Eltrich <elchy@dahoam.de>
...
says it got pppd working for him.
1999-01-31 21:41:00 +00:00
fed24e89c8
Adapt disklabel_mbr.h change.
1999-01-31 19:56:56 +00:00
e30bd461e3
Fix prototypes for iso_gethostbyname and iso_gethostbyaddr
1999-01-31 19:43:32 +00:00
b970be0907
Made reboot and halt work.
1999-01-31 18:12:14 +00:00
107dd5ccc6
use WSEMUL_VT100 instead of WSEMUL_SUN
1999-01-31 18:07:41 +00:00
2cbc4abc96
Make this compile again.
1999-01-31 14:06:40 +00:00
a4f0ae9043
Adapt disklabel_mbr.h change.
1999-01-31 13:54:24 +00:00
cbbad6d2b2
Add bzero/bcopy defines to use PROM memset/memcpy.
...
Change test to include defines from
#ifndef _KERNEL
to
#if defined(_STANDALONE) && !defined(_NO_PROM_DEFINES)
1999-01-31 13:49:40 +00:00
0e91ebb904
make the last fix work as intended
1999-01-31 11:15:43 +00:00
93a62a003d
Wrong sign of dialout.
1999-01-31 10:30:22 +00:00
08fd4f3f47
80 cols.
1999-01-31 09:27:18 +00:00
35fa3fbdc7
add SWAP_DUMPDEV.
1999-01-31 09:26:28 +00:00
1c93cc902d
non-root users can mkfifo over NFS.
1999-01-31 09:24:10 +00:00
7006310cbd
retire _LP64; use compiler provided __arch64__, but still defined _LP64 where we used to anyway.
1999-01-31 09:21:18 +00:00
21ab415ee6
Added support for setting boothowto from boot loader flags.
...
print out string of `.' when powering down to work around ununderstood
behavior of rtc chip.
1999-01-31 07:02:33 +00:00
f0b3caaceb
Accidentally uncommitted wscons change.
...
attach nextdisplay to mainbus for wscons support.
1999-01-31 06:59:30 +00:00
ee72ee212e
darn- 7.55 seems to be a little unstable- go back to 1.31
1999-01-31 04:56:20 +00:00
d0ca7993a0
Remove genpubasym.cf stuff
1999-01-31 01:01:12 +00:00
98c9d5e1c6
Remove genpubassym.cf stuff. The macro _MIPS_BSD_API allows selection of a
...
64-bit clean compilation model.
1999-01-31 00:55:41 +00:00
b85f4a5e4d
Remove redundant code (leftover from editing).
1999-01-30 21:54:49 +00:00
a22cfcf3d4
Make programs that use raw IP work again; trim the header length from ip_len
...
before handing the packet off to the socket.
1999-01-30 21:43:16 +00:00
736a561afb
Add my name in the copyright, since the code looks very different now.
1999-01-30 17:51:52 +00:00
5699d1ab3d
Remove exec.c from here. I want to make it obvious that it has to be built
...
with different flags from dosboot and biosboot. Although right now this
does not make a difference because we are building the libraries twice,
it can make a difference when we share the builds.
1999-01-30 17:46:53 +00:00
07b1febfb8
- Use MARK_ENTRY instead of MARK_START.
...
- ELF changes. Now an ELF installboot installs ELF bootblocks properly.
1999-01-30 17:45:42 +00:00
371363a158
Add exec.c here and bump version for elf.
...
XXX: This code has not been tested!
1999-01-30 17:44:10 +00:00
25fc1fa758
Add exec.c here...
1999-01-30 17:43:38 +00:00
ad9c7a287c
Remove exec.o, and make necessary changes for elf.
1999-01-30 17:43:10 +00:00
7bc05635d3
Catch up with changes to MBR handling. From Erik Bertelsen in PR 6911.
1999-01-30 17:34:31 +00:00
8ee118c70d
Fix problems with bus_space*() macros (thanks M.Drochner).
1999-01-30 17:02:32 +00:00
8ed711f1bc
MC68450 DMAC regs.
1999-01-30 14:58:26 +00:00
cf06eef09a
make wscons the default
1999-01-30 13:44:25 +00:00
53e963b5ef
Add -mmemcpy (from Jonathan Stone) and bump -G to 128. Bootblocks now
...
fit! Still needs more testing, so we don't actually install them yet...
1999-01-30 12:57:58 +00:00
98ceefb712
Actually depend on libsa now.
1999-01-30 12:39:28 +00:00
555cdd32e5
Don't define an ioctl routine for the rz driver, nor pull in the empty
...
routines in libsa/dev.c.
1999-01-30 12:30:57 +00:00
1047f11c01
Remove unused callvec stubs and libsa routines, add memcpy.c.
1999-01-30 12:23:10 +00:00
db342dee15
Add memcpy callvec stub, copied from strcat.c
1999-01-30 11:54:31 +00:00
a9f9300b78
Tell how many bytes of code are available, and print a warning if the
...
bootblocks are too large - from Michael Hitch.
1999-01-30 10:14:45 +00:00
6bcdc2b5d2
Implement and use Fast Posting for both parallel && fibre. Redo a bit of
...
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
1999-01-30 07:31:50 +00:00
513722ba25
Grrr.. Do the *correct* and *usable* 1.31 firmware. You have to power
...
cycle to get rid of the old 1.31 firmware. *@!$&^@&$!&^&^!!!!!
But anyway comment it out and use new SBus 7.55 firmware. We get fast posting
with this as well as 32 luns and target mode support.
1999-01-30 07:18:59 +00:00
09ce6222fc
roll internal release tag
1999-01-30 07:14:26 +00:00
5c5ac2958f
roll internal release tag and finally use bus_space I/O
1999-01-30 07:10:38 +00:00
1ece20c808
roll internal release tag
1999-01-30 07:08:04 +00:00
500353b4c3
Use DEC_REX_MAGIC instead of a undocumented magic number
1999-01-30 00:40:38 +00:00
e1167d2415
Add REX magic number
1999-01-30 00:36:10 +00:00
b6867c91a4
make the timeout for process/vt synchronization "config" settable and
...
ddb/gdb patchable
1999-01-29 22:24:24 +00:00
4fe3a6480e
Fix bug exposed by new "mkdep" program:
...
"${SFILES}" is empty for a "SHARK" kernel so that "cc" will fail with
"No input files" during "mkdep".
1999-01-29 22:20:49 +00:00
191dab44fa
Um, last rev was kind of backwards... actually build exec.o so that
...
the boot block links.
1999-01-29 22:13:42 +00:00
b88b2d4f9b
MBR_PTYP_* -> MBR_PTYPE_* to make this compile again.
1999-01-29 21:20:22 +00:00
e58bb79483
Merge XMS changes from exec_fromdos.c
1999-01-29 18:49:08 +00:00
e25e5c88f9
Both booters need exec.o now.
1999-01-29 18:47:58 +00:00
35ca0db06c
Revert, wrong place for this.
1999-01-29 18:47:24 +00:00
6cadeb1ea6
Add exec.c here.
1999-01-29 18:46:15 +00:00
3c7776f1b6
exec.c has all the info now.
1999-01-29 18:45:34 +00:00
89cc672d98
Jason forgot to make the disklabel_mbr.h changes for this and ows me 5 hours
...
of debugging.
1999-01-29 18:45:12 +00:00
722d35a400
Add the ability to get the size of the loaded image without actually
...
loading. This is useful for dos loading and installboot.
1999-01-29 18:44:09 +00:00
7a7391de52
Simplify by using new feature of getting the load size.
1999-01-29 18:43:11 +00:00
1e39fefac4
Remove -g accidental addition
1999-01-29 18:41:50 +00:00
cc66380116
fix address incrementing in the read_region_N, write_region_N,
...
set_region_N and copy_region_N methods
1999-01-29 16:30:51 +00:00
a7c11f272e
Copy previous fix for TLB miss routine to XTLB miss routine to avoid
...
processor-dependent behavior in 32-bit ops on 64-bit operands.
1999-01-29 16:10:06 +00:00
b87a535a9f
A small typo fix, + enclose "used_vnode_size = %qu" debug printf inside
...
#ifdef DEBUG/#endif
1999-01-29 12:56:17 +00:00
ddd6d4cef1
Add some more PROM entry points
1999-01-29 12:05:02 +00:00
ce870816e0
Cosmetic changes, from Soren S. Jorvan.
1999-01-29 11:36:20 +00:00
0bc97aaca7
In match_harddisk(), ignore "empty drive" type errors as well (from Soren S.
...
Jorvang).
1999-01-29 11:20:34 +00:00
12868a7d80
Return ENODEV instead of EIO when we are trying to open a device without media
...
in the drive. restrict "opening of empty drive" to character devices only
(reading a block device returns a short read instead of ENODEV, which can lead
to confusion).
1999-01-29 11:17:58 +00:00
15afeeecca
Remove an incorrect (but harmless) comment.
1999-01-29 08:42:27 +00:00
f9e92fac23
Fix bit test
1999-01-29 07:35:05 +00:00
916b809a51
Make a `machine' symlink to ..../pmax/include to locate new location of
...
the dec_????.h files. Gleaned from other ports' stand/Makefile.inc's.
1999-01-29 05:51:15 +00:00
9a3172af0e
Include dec_{boot,exec,prom}.h from <machine/...>, not <stand/libsa/...>
1999-01-29 05:37:45 +00:00
0b2a74160d
Include dec_{boot,exec,prom}.h from <machine/...>, not <stand/libsa/...>
...
Remove unused include files.
1999-01-29 05:33:49 +00:00
sakamoto