regenerate from template
This commit is contained in:
is
parent
c5e0224025
commit
2633b97c02
@ -1,165 +1,195 @@
|
||||
# $NetBSD: DRACO,v 1.26 1998/11/28 21:27:42 is Exp $
|
||||
|
||||
#
|
||||
# Macro System GmbH "DraCo", currently 68060-only until FPE is integrated.
|
||||
# This file was automatically created. Changes will be
|
||||
# lost when running make in this directory.
|
||||
#
|
||||
# Created from:
|
||||
#$ NetBSD: GENERIC,v 1.114 1999/02/04 19:01:38 is Exp $
|
||||
|
||||
# this will be replace by std.amiga soon:
|
||||
include "arch/amiga/conf/std.amiga"
|
||||
|
||||
maxusers 8
|
||||
options RTC_OFFSET=0
|
||||
|
||||
#
|
||||
# mainboards to support (in addition to Amiga)
|
||||
#
|
||||
#mainboards to support (in addition to Amiga)
|
||||
|
||||
options DRACO
|
||||
|
||||
#
|
||||
# processors this kernel should support
|
||||
#
|
||||
#processors this kernel should support
|
||||
|
||||
options "M68060" # support for 060
|
||||
options "M060SP" # MC68060 software support (Required for 060)
|
||||
options M68060 # support for 060
|
||||
options M060SP # MC68060 software support (Required for 060)
|
||||
|
||||
#Networking options
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
options INET # IP networking support (Required)
|
||||
#options ISO # ISO Networking support
|
||||
#options TPIP # ARGO TP networking support
|
||||
#options CCITT # CCITT X.25
|
||||
#options NS # Xerox XNS
|
||||
#options EON # ISO CLNL over IP
|
||||
#options GATEWAY # Packet forwarding
|
||||
#options DIRECTED_BROADCAST # Broadcast across subnets
|
||||
#options NSIP # XNS over IP
|
||||
#options MROUTING
|
||||
#options MROUTING # Multicast routing
|
||||
options NS # XNS
|
||||
#options NSIP # XNS tunneling over IP
|
||||
options ISO,TPIP # OSI
|
||||
options EON # OSI tunneling over IP
|
||||
options CCITT,LLC,HDLC # X.25
|
||||
options NETATALK # AppleTalk networking protocols
|
||||
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
||||
options PPP_DEFLATE # Deflate compression support for PPP
|
||||
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
||||
options PFIL_HOOKS # pfil(9) packet filter hooks
|
||||
options IPFILTER_LOG # ipmon(8) log support
|
||||
|
||||
#
|
||||
# File system related options
|
||||
#
|
||||
options QUOTA # Disk quotas for local disks
|
||||
options NFSSERVER # Network File System server side code
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
file-system FFS # Berkeley fast file system
|
||||
#file-system LFS # log-structured filesystem (experimental)
|
||||
file-system MFS # Memory based filesystem
|
||||
file-system NFS # Network File System client side code
|
||||
file-system PROCFS # Process filesystem
|
||||
file-system KERNFS # Kernel parameter filesystem (Recommended)
|
||||
file-system FDESC # /dev/fd filesystem
|
||||
file-system NULLFS # Loopback filesystem
|
||||
file-system ADOSFS # AmigaDOS file system
|
||||
file-system "CD9660" # ISO 9660 file system, with Rock Ridge
|
||||
#file-system PORTAL # Portal filesystem
|
||||
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
|
||||
file-system MSDOSFS # MS-DOS filesystem
|
||||
file-system FDESC # user file descriptor filesystem
|
||||
file-system KERNFS # kernel data-structure filesystem
|
||||
file-system NULLFS # loopback filesystem
|
||||
#file-system PORTAL # Portal filesystem
|
||||
file-system PROCFS # /proc filesystem
|
||||
file-system UMAPFS # NULLFS + uid and gid remapping
|
||||
file-system UNION # union filesystem
|
||||
|
||||
#
|
||||
# Compatability options for various existing systems
|
||||
#
|
||||
options COMPAT_12
|
||||
options COMPAT_13
|
||||
#options "COMPAT_10" # compatability with older NetBSD release
|
||||
#options COMPAT_SUNOS # Support to run Sun (m68k) executables
|
||||
options "TCP_COMPAT_42" # Use 4.2 BSD style TCP
|
||||
options "COMPAT_NOMID" # allow nonvalid machine id executables
|
||||
#options COMPAT_HPUX # HP300 compatability
|
||||
#Filesystem options
|
||||
options NFSSERVER # Network File System server side code
|
||||
options QUOTA # User and group quotas in FFS
|
||||
#options FFS_EI # FFS Endian Independant support
|
||||
|
||||
#Compatability options for various existing systems
|
||||
|
||||
options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
|
||||
options COMPAT_43 # compatibility with 4.3BSD interfaces
|
||||
options COMPAT_09 # compatibility with NetBSD 0.9
|
||||
options COMPAT_10 # compatibility with NetBSD 1.0
|
||||
options COMPAT_12 # compatibility with NetBSD 1.2
|
||||
options COMPAT_13 # compatibility with NetBSD 1.3
|
||||
options COMPAT_SUNOS # Support to run Sun (1) executables
|
||||
options COMPAT_NOMID # allow nonvalid machine id executables
|
||||
#options COMPAT_LINUX # Support to run Linux/1 executables
|
||||
#options EXEC_ELF32 # 32-bit ELF executables (Linux)
|
||||
|
||||
#Support for System V IPC facilities.
|
||||
|
||||
#
|
||||
# Support for System V IPC facilities.
|
||||
#
|
||||
options SYSVSHM # System V-like shared memory
|
||||
options SYSVMSG # System V-like messages
|
||||
options SYSVSEM # System V-like semaphores
|
||||
|
||||
#
|
||||
# Support for various kernel options
|
||||
#
|
||||
options LKM # Loadable kernel modules
|
||||
options KTRACE # Add kernel tracing system call
|
||||
options DIAGNOSTIC # Add additional error checking code
|
||||
options "NKMEMCLUSTERS=256" # Size of kernel malloc area
|
||||
#Support for various kernel options
|
||||
|
||||
options KTRACE # system call tracing support
|
||||
options LKM # Loadable kernel modules
|
||||
options NKMEMCLUSTERS=256 # Size of kernel malloc area
|
||||
options UCONSOLE # anyone can redirect a virtual console
|
||||
#options INSECURE # allow, among other insecure stuff, LKM
|
||||
# loading in multi-user mode.
|
||||
options SCSIVERBOSE # Verbose SCSI errors
|
||||
|
||||
options NTP # NTP phase/frequency locked loop
|
||||
|
||||
#Misc. debugging options
|
||||
|
||||
#
|
||||
# Misc. debugging options
|
||||
#
|
||||
options DEBUG # Add debugging statements
|
||||
options DDB # Kernel debugger
|
||||
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
||||
options DIAGNOSTIC # Extra kernel sanity checks
|
||||
#options DEBUG # Enable misc. kernel debugging code
|
||||
#options SYSCALL_DEBUG # debug all syscalls.
|
||||
#options SCSIDEBUG # Add SCSI debugging statements
|
||||
#options PANICBUTTON # Forced crash via keypress (???)
|
||||
|
||||
#
|
||||
# Amiga specific options
|
||||
#
|
||||
#options LIMITMEM=24 # Don't use more than LIMITMEM MB of the
|
||||
# first memory bank. Default: unlimited
|
||||
#options NKPTADD=4 # set this for 4 additional KPT pages
|
||||
#options NKPTADDSHIFT=24 # set this for 1 additional KPT page
|
||||
# per 16 MB (1<<24 bytes) of RAM (default)
|
||||
# define and decrease this, or define and
|
||||
# increase NKPTADD if you get "out of PT pages"
|
||||
# panics.
|
||||
#Amiga specific options
|
||||
|
||||
#options LIMITMEM=24 # Don't use more than LIMITMEM MB of the
|
||||
# first bank of RAM. (default: unlimited)
|
||||
#options NKPTADD=4 # set this for 4 additional KPT pages
|
||||
#options NKPTADDSHIFT=24 # set this for 1 additional KPT page
|
||||
# per 16 MB (1<<24 bytes) of RAM
|
||||
# define and decrease this, or define and
|
||||
# increase NKPTADD if you get "out of PT pages"
|
||||
# panics.
|
||||
|
||||
#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
|
||||
#before the 10 secondinterval ends, or that KBDRESET does work at all.
|
||||
#options KBDRESET # sync on Ctrl-Amiga-Amiga
|
||||
|
||||
#These options improve performance with the built-in serial port
|
||||
#on slower Amigas. Try the larger buffers first then lev6_defer.
|
||||
#options SERIBUF_SIZE=4096
|
||||
#options SEROBUF_SIZE=32
|
||||
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
|
||||
|
||||
options RETINACONSOLE # enable code to allow retina to be console
|
||||
|
||||
#options "KFONT_8X11" # 8x11 font
|
||||
#options KFONT_8X11 # 8x11 font
|
||||
|
||||
# This is how you specify the blitting speed, higher values may speed up blits
|
||||
# a littel bit. If you raise this value too much some trash may appear.
|
||||
# the commented version is the default.
|
||||
#options RH_MEMCLK 61000000
|
||||
# this option enables the 64 bit sprite which doesn't seems to be work
|
||||
# for quite a few people. E.g. The cursor sprite will turn to a block
|
||||
# when moved to the top of the screen in X.
|
||||
#This is how you would tell the kernel the A2410 oscillator frequencies:
|
||||
#The used frequencies are the defaults, and don't need option setting
|
||||
#options ULOWELL_OSC1=36000000
|
||||
#options ULOWELL_OSC2=66667000
|
||||
|
||||
#This is how you specify the blitting speed, higher values may speed up blits
|
||||
#a littel bit. If you raise this value too much some trash may appear.
|
||||
#the commented version is the default.
|
||||
#options RH_MEMCLK=61000000
|
||||
#this option enables the 64 bit sprite which doesn't seems to be work
|
||||
#for quite a few people. E.g. The cursor sprite will turn to a block
|
||||
#when moved to the top of the screen in X.
|
||||
#options RH_64BIT_SPRITE
|
||||
# enables fast scroll code appears to now work on 040 systems.
|
||||
#enables fast scroll code appears to now work on 040 systems.
|
||||
#options RETINA_SPEED_HACK
|
||||
# enables the Hardwarecursor which does not work on some systems.
|
||||
options RH_HARDWARECURSOR
|
||||
#enables the Hardwarecursor which does not work on some systems.
|
||||
#options RH_HARDWARECURSOR
|
||||
|
||||
grfrh0 at zbus0 # retina III
|
||||
|
||||
grfrh0 at zbus0 # Altais looks just like the Retina Z3
|
||||
grf2 at grfrh0
|
||||
|
||||
ite2 at grf2 # terminal emulators for grf's
|
||||
|
||||
# XXX msc and mfc dont compile currently.
|
||||
|
||||
#msc0 at zbus0 # A2232 MSC multiport serial.
|
||||
#mfc0 at zbus0 # MultiFaceCard I/O board
|
||||
#mfcs0 at mfc0 unit 0 # MFC serial
|
||||
#mfcs1 at mfc0 unit 1 # MFC serial
|
||||
msc0 at zbus0 # A2232 MSC multiport serial.
|
||||
mfc0 at zbus0 # MultiFaceCard I/O board
|
||||
mfcs0 at mfc0 unit 0 # MFC serial
|
||||
mfcs1 at mfc0 unit 1 # MFC serial
|
||||
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
|
||||
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
|
||||
#mfcs2 at mfc1 unit 0
|
||||
#mfcs3 at mfc1 unit 1
|
||||
#mfcp1 at mfc1 unit 0
|
||||
|
||||
hyper* at zbus? # zbus HyperCom3 + HyperCom4
|
||||
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
|
||||
com* at hyper? port ? # Hypercom3/4 serial ports
|
||||
#lpt* at hyper? port ? # not yet: Hypercom3 parallel port
|
||||
|
||||
#DraCo Mainboard devices (sans keyboard)
|
||||
|
||||
drbbc0 at mainbus0 # DraCo battery backed clock
|
||||
drsupio0 at mainbus0 # DraCo superio chip
|
||||
com* at drsupio? port ? # DraCo serial
|
||||
lpt0 at drsupio? port ? # DraCo parallel
|
||||
|
||||
hyper* at zbus? # zbus HyperCom 3/4
|
||||
com* at hyper? port ? # Hypercom serial
|
||||
#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
|
||||
|
||||
le* at zbus0 # Lance ethernet.
|
||||
ne* at zbus0 # ne2000 lookalike ethernet.
|
||||
ed0 at zbus0 # dp8390 ethernet
|
||||
es0 at zbus0 # SMC 91C90 ethernet
|
||||
qn0 at zbus0 # quicknet ethernet
|
||||
bah* at zbus0 # C= arcnet
|
||||
melody* at zbus0 # Melody MPEG audio decoder
|
||||
audio* at melody?
|
||||
|
||||
#Ethernet cards:
|
||||
le* at zbus0 # A2065, Ameristar, Ariadne
|
||||
ne* at zbus0 # AriadneII
|
||||
ed0 at zbus0 # Hydra, ASDG LanRover
|
||||
es0 at zbus0 # CEI A4066 EthernetPLUS
|
||||
qn0 at zbus0 # Quicknet
|
||||
|
||||
# scsi stuff
|
||||
drsc0 at mainbus0 # DraCo mainboard scsi
|
||||
bah* at zbus0 # C=/Ameristar A2060 / 560
|
||||
|
||||
#Greater Valley Product Bus
|
||||
gvpbus* at zbus0
|
||||
|
||||
drsc0 at mainbus0 # DraCo scsi
|
||||
scsibus* at drsc0
|
||||
|
||||
# each hard drive from low target to high
|
||||
# will configure to the next available sd unit number
|
||||
#each hard drive from low target to high
|
||||
#will configure to the next available sd unit number
|
||||
sd* at scsibus? target ? lun ? # scsi disks
|
||||
st* at scsibus? target ? lun ? # scsi tapes
|
||||
cd* at scsibus? target ? lun ? # scsi cd's
|
||||
@ -167,11 +197,24 @@ ss* at scsibus? target ? lun ? # scsi scanner
|
||||
ch* at scsibus? target ? lun ? # scsi autochangers
|
||||
uk* at scsibus? target ? lun ? # scsi unknown
|
||||
|
||||
pseudo-device pty 16 # pseudo terminals
|
||||
pseudo-device loop # network loopback
|
||||
pseudo-device bpfilter 2 # berkeley packet filters
|
||||
pseudo-device tun 2
|
||||
pseudo-device ppp 2 # ppp protocol network drivers
|
||||
pseudo-device vnd 4 # pseudo disk on file
|
||||
pseudo-device loop # loopback network interface
|
||||
pseudo-device sl 1 # SLIP network interfaces
|
||||
pseudo-device ppp 1 # PPP network interfaces
|
||||
pseudo-device tun 1 # network tunnel line discipline
|
||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
||||
pseudo-device bpfilter 16 # Berkeley packet filter
|
||||
pseudo-device ipfilter # IP Filter package
|
||||
|
||||
pseudo-device view 10 # views
|
||||
pseudo-device pty 16 # pseudo ptys
|
||||
|
||||
pseudo-device vnd 4 # vnode pseudo-disks
|
||||
pseudo-device ccd 4 # concatenated disk devices
|
||||
#pseudo-device raid 4 # RAIDframe disk driver
|
||||
|
||||
#rnd is EXPERIMENTAL at this point.
|
||||
#pseudo-device rnd # /dev/random and in-kernel generator
|
||||
#options RND_COM # use "com" randomness as well (BROKEN)
|
||||
|
||||
config netbsd root on ? type ?
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user