e0ca220c2c
Add wlanctl(8), a utility for examining 802.11 node tables.
2004-07-16 03:13:48 +00:00
1ac1adff5c
Oops, stragglers: install ieee80211_channel.h, ieee80211_sysctl.h.
2004-07-16 03:11:39 +00:00
9946103dce
Add sysctl access to 802.11 node tables, step #2 .
2004-07-16 03:02:41 +00:00
cb049b8c75
Add sysctl access to 802.11 node tables, step #1 .
2004-07-16 03:01:09 +00:00
22b2f98500
Move ieee80211_channel definition and channel flags into
...
ieee80211_channel.h, step #2 .
2004-07-16 02:57:32 +00:00
d5a069fe39
Move ieee80211_channel definition and channel flags into
...
ieee80211_channel.h, step #1 .
2004-07-16 02:56:50 +00:00
74d2bb365f
Straggler: *really* chain the ieee80211coms.
2004-07-16 02:54:05 +00:00
e5c3be4f90
Send "no carrier"/"active" indications on the routing socket when
...
(most) 802.11 interfaces change state.
2004-07-16 02:38:34 +00:00
d18cdaab4e
Chain ieee80211coms together so that the 802.11 sysctls can walk
...
them all to retrieve their node tables.
2004-07-16 02:36:58 +00:00
3f35f96f9a
prevent mbuf leak on IPsec tunnel mode. from iij seil team
2004-07-16 01:12:02 +00:00
5727d6c2d9
+ SIP
2004-07-16 01:07:02 +00:00
85fdb1645f
Nuke reask_sizemult() - it isn't used any more
2004-07-15 21:06:45 +00:00
f6a07159af
typo
2004-07-15 20:21:55 +00:00
7bdf35d6e3
Add a copyright message.
2004-07-15 19:58:00 +00:00
5f16d6ef5b
Synchronize with "src/doc/CHANGES" from the 2.0 branch.
2004-07-15 15:54:46 +00:00
5e7fa574fe
Remove entry for on-board MACE MAC-110 Ethernet on O2 because it has
...
been pulled into the 2.0 branch.
2004-07-15 15:52:27 +00:00
0237ca34a7
Reduce transmit queue len to 16 for the Intel i82547 to avoid FIFO
...
overruns. This fixes the horrible send performance reported in
PR kern/23782. Reviewed by Frank van der Linden and Jason R. Thorpe.
2004-07-15 15:21:57 +00:00
69051bd3c3
Add support for 3Com 3c920B-EMB-WNM Integrated Fast Ethernet,
...
as found on Asus P4R800-VM motherboards.
From BL on Korea BSD User Forum (sorry but I don't know his real name).
2004-07-15 13:18:08 +00:00
88642578e4
Regen for 3c920B-EMB-WNM Integrated Fast Ethernet.
2004-07-15 13:11:36 +00:00
4240a2f1f9
Add 3Com 3c920B-EMB-WNM Integrated Fast Ethernet.
2004-07-15 13:09:21 +00:00
ffb3101064
round(3) and roundf(3) appeared in 2.0.
...
Bump date.
2004-07-15 12:12:39 +00:00
1e147c565c
Remove an outdated comment.
2004-07-15 11:51:56 +00:00
20aac67434
Bump date for previous.
2004-07-15 10:47:43 +00:00
cb255f199c
Bump date for previous; mark up path with Pa.
2004-07-15 10:45:33 +00:00
fb79fa6390
define __GNUC_PREREQ__ if it isn't available on host.
2004-07-15 09:01:29 +00:00
f619a0eb00
Fix bug in Christos' recent cleanup which broke the "help" and "rhelp" commands.
2004-07-15 08:50:10 +00:00
0f8b8b27c5
Insist that callers use atw_write_sram to copy even-length buffers
...
to even offsets in the ADM8211 SRAM.
assert->KASSERT
2004-07-15 07:31:05 +00:00
3341b62f3e
Totally revamp device initialization using clue from the reference
...
driver. I also have re-organized the code a lot.
2004-07-15 07:26:17 +00:00
9ad89f8c4a
Totally revamp device resets using clue from the reference driver.
2004-07-15 07:25:40 +00:00
d6014cf055
Make atw_read_srom static.
2004-07-15 07:25:06 +00:00
611fc69801
Re-organize, add new, and remove old prototypes.
2004-07-15 07:22:13 +00:00
e083028d58
Once again, stop calling the bus front-end's interrupt-acknowledgement
...
callback.
2004-07-15 07:20:46 +00:00
d1b1d2ead4
Totally revamp the way that I program the synthesizer and baseband.
2004-07-15 07:19:46 +00:00
3e1b8a977f
Take the paranoia out of the code for writing baseband registers.
2004-07-15 07:13:44 +00:00
7a7588432a
Simplify the Rx filter setup, following the AL981 code in tlp(4).
2004-07-15 07:11:23 +00:00
6a35b15406
Countdown correctly to the Target Beacon Transmission Time.
...
Borrowing an idea from the reference driver, use no 64-bit arithmetic.
2004-07-15 07:10:25 +00:00
1146f43c7a
In atw_start_beacon, set CAP0 as well as BCNT and CAP1.
2004-07-15 07:01:20 +00:00
24e7e4403a
Simplify IBSS merge code.
2004-07-15 07:00:43 +00:00
1616cd784d
Only write the SSID buffer to the ADM8211 SRAM up to the end of
...
the SSID, not up to the end of the buffer. Given the (too
conservative?) delays involved, this should save some time when we
join a new network.
2004-07-15 06:53:11 +00:00
0404143d84
Change the order in which I write the BSSID registers on the ADM8211,
...
to match the reference driver. This probably does not make any
functional difference.
2004-07-15 06:50:34 +00:00
81c734b57d
Set up the Tx descriptor ring more safely. Fix an endianness bug.
...
"It's a wonder this ever worked." (Actually, it's not.)
2004-07-15 06:48:45 +00:00
fce6670792
Re-synchronize TSFT after an IBSS merge.
2004-07-15 06:46:08 +00:00
6e5f00adc9
Here is the serial bus format for the RF3000.
2004-07-15 06:39:50 +00:00
6e8ef3ee56
Delay for tens of milliseconds lot after writing the Network Access
...
Register. I am slavishly imitating the reference driver, here.
I will come back and lower the delays later.
2004-07-15 06:38:46 +00:00
9bd30b81ae
In the transmit interrupt handler, do not unnecessarily synchronize
...
all the descriptors for a buffer chain. Just synchronize the last
one, which has the interesting stuff.
I still synchronize all the descriptors for the buffer chain if
super-verbose debugging is enabled, since the driver will print
all the descriptors for the chain.
2004-07-15 06:37:22 +00:00
73815df521
Remove a less-than-helpful comment.
2004-07-15 06:34:24 +00:00
d7d89cb468
Clamp the length of a received packet, just in case the chip lies.
2004-07-15 06:33:43 +00:00
e53ab344b8
When super-verbose debugging is enabled, convert Rx descriptors'
...
endianness before printing them.
2004-07-15 06:32:42 +00:00
630f4475eb
Delete some dead code.
...
Don't call back into the bus-specific code for resets any longer.
It does not seem to be necessary.
2004-07-15 06:31:43 +00:00
02c31c63b0
During scans, initialize the BSSID to ff:ff:ff:ff:ff:ff before
...
sending the first probe request.
2004-07-15 06:30:12 +00:00
dyoung