eee5e33e8a
- in iommu_remove(), move len adjustment outside if statement, leaving
...
just one copy of this.
- remove duplicate setting of sgsize in iommu_dvmamap_load().
- fix DIAGNOSTIC check in iommu_dvmamap_load_raw() to panic() in unexpected
conditions only (not normal ones), and also add an extra case.
2000-05-17 09:53:53 +00:00
b444da72bd
Skip fixup phase when system BIOS setting were perfect.
...
don't write 0 to command register. (it is harmful).
2000-05-17 09:50:34 +00:00
53fa9da4df
move zs_attach() to after the setting of the console device, to avoid
...
having cn_dev being 0 and thus cnopen() being called recursively. this
fixes this problem for zs-based console's only.
2000-05-17 09:28:22 +00:00
651712a140
add a note about US IIi and PCI_INTERRUPT_LINE register
2000-05-17 09:25:58 +00:00
6dad37e26a
expand a comment slightly.
2000-05-17 09:25:27 +00:00
f2a19f58b5
fix || vs. && bug, and clean up some cruft.
2000-05-17 09:16:44 +00:00
0eeab9735f
fix another warning.
2000-05-17 09:12:10 +00:00
5eacd822a1
delete undefined 'NEC_MCR_4XX'.
2000-05-17 08:38:25 +00:00
3b90b5c5c4
Add support for bus_dma_load_raw() so the le driver will work again.
2000-05-17 02:31:12 +00:00
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
aa0007b5a5
In case of db_onpanic=0, still drop to ddb if the trap was from within
...
ddb.
i.e. "db> x/s 0x14" should return you to ddb when it faults, regardless
of the state of db_onpanic.
2000-05-15 20:16:48 +00:00
66ecdc15d3
Remove unused PSL_USERCLR defines for processor status register.
2000-05-15 08:36:32 +00:00
8a71a7a50f
Backout the previous change which was done mistakenly.
2000-05-15 06:45:44 +00:00
c7c815f46b
Remove #include <machine/psl.h> which is not used.
2000-05-15 06:39:14 +00:00
cb3a247145
Use bsd.hostprog.mk to allow ELF target on a.out host.
2000-05-15 05:02:29 +00:00
ab17e681e7
NEC MC-CS LIGHT button.
...
NEC MC-R430 COM0 power.
CASIO E55 COM0 power.
CASIO E55 LIGHT button.
2000-05-15 01:40:44 +00:00
950e36ed1f
Don't panic on a segfault, but drop into the debugger if it's there.
...
Not that this helps much, since we immediately panic in cpu_coredump instead.
2000-05-14 22:50:01 +00:00
6943d5dd19
defopt FPSP.
2000-05-14 14:13:53 +00:00
879e4dbe7c
defopt FPSP.
2000-05-14 14:13:50 +00:00
53e627cd0b
MD parts of uvm_pageidlezero.
2000-05-14 14:10:09 +00:00
42ccab0d49
Add fp emulation for sqrt_s and sqrt_d instructions
...
from Jeff Smith <jeffs@geocast.com>. These are needed to support
-mips2 compilation. With this change, on a QED 5231 we now pass the
paranoia tests, and are successfully using userlands built with -mips2.
2000-05-14 06:19:32 +00:00
2dc49a4780
Comment out XSERVER and XSERVER_DDB and move them to the pccons-specific
...
section. They are not used with wscons.
2000-05-14 04:36:09 +00:00
f26b6caddd
clear CPU count register interrupt properly (VR4100).
2000-05-14 03:16:11 +00:00
f9b83f27e9
change Telios keyboard map: KS_KP_Enter -> KS_Return
2000-05-13 20:34:13 +00:00
6572f303f4
remove now redundant comment regarding IBM_L40 define
2000-05-13 19:58:41 +00:00
950749ab6f
add special bootblocks for IBM PS/2 - those machines need different gate A20
...
addressing
2000-05-13 19:58:01 +00:00
187860f8fb
Fix problem from 1.27, and more long-standing in the commented-out
...
-DSUPPORT_SERIAL options:
Only set -DSUPPORT_SERIAL=CONSDEV_PC for "biosboot" and "biosboot_resetvideo",
but not for biosboot_com0.
2000-05-13 19:03:19 +00:00
9f75c038c1
Add vmapbuf/vunmapbuf
2000-05-13 17:57:14 +00:00
4b7597ffe5
Handle more cases of existing mappings in pmap_enter
2000-05-13 17:56:32 +00:00
924b1948b4
Replace (non-working) ncr with new siop.
2000-05-13 14:54:51 +00:00
e65735cc74
More informative stack backtrace. Prints whole stack frames\!
2000-05-13 14:43:11 +00:00
9d61165c26
Oops. Swedish is KB_SV.
2000-05-13 14:40:10 +00:00
b85a45b9f1
Move out spurious defines
2000-05-13 12:17:49 +00:00
d4091aa02e
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
2000-05-13 05:31:00 +00:00
a72e1e9c59
Add support for on-the-fly switching of console devices interactively
...
from the i386 biosboot via the "consdev" command.
2000-05-13 05:25:20 +00:00
1dac4cd666
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
Move "Press return" printf() out of print_banner() so we can
print_banner() reasonably after switching devices.
2000-05-13 05:23:37 +00:00
62923b307e
fix #define RGB24(r, g, b)
2000-05-13 03:12:56 +00:00
26f56b9cab
Only use __builtin_va_alist_t if using GCC 2.96 or later. Fixes
...
pkg/10080, from Matthias Scheler.
2000-05-12 23:49:11 +00:00
9c43539f8f
The VIA Technologies VT82C686A SMBus Controller claims to be a PCI/ISA
...
bridge, ignore it. Should fix kern/10093 by Mark Dohring.
2000-05-12 20:31:22 +00:00
f02836787f
fix CLUT index bug.
2000-05-12 18:09:55 +00:00
e38d6212b9
make it compile again with '-Werror'.
2000-05-12 04:43:21 +00:00
ed3acc8fbb
zsr has acquired a wi card
2000-05-12 03:14:21 +00:00
d5d280d015
-attach auxilary PCI buses at the 450NX chipset,
...
tested by hubertf in a small configuration (1 PXB - 2 PCI buses)
-being here, remove the per-VID/DID matching code which was commented
out for a while
2000-05-11 16:44:14 +00:00
8fedbd8497
Add i386-specific part of MicroChannel Architecture bus support, as
...
found in some older IBM PS/2 machines.
This code is based upon work by Scott D. Telford, with some minor bits
in arch/i386/mca/mca_machdep.c taken from FreeBSD.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 16:38:10 +00:00
6c1643be43
minor adjustment for compiling with IBM_L40
2000-05-11 16:11:54 +00:00
98beeaa61d
add commented out CPPFLAGS+= -DIBM_L40 - needed for PS/2 bootblocks
2000-05-11 16:05:51 +00:00
2d2ad4f3e8
fix cosmetic brain-oh in last; s/attachonly/matchonly/g
2000-05-11 15:26:23 +00:00
a2606dbe80
Address PR#10042: instead of getting the dynamic configuration
...
all the time (which crashes some vaios), get the static configuration,
and if config_search() finds a node, then do the dynamic configuration.
This seems to work fine on multiple vaios (which seem to crash
in different places...go figure).
Also, bring prototypes in-line with KNF and declare static as appropriate.
"#if 0" out pnpbios_getapmtable() and pnpbios_setnode() as they
are not called.
Fix printf()s to print out dv_xname.
Fix a comment typo.
Use manifest constants (PNP_CF_DEVCONF_DYNAMIC, etc.) in calls to
pnpbios_getnode() instead of hardcoded constants.
2000-05-11 05:54:49 +00:00
742429ff1e
#undef'ed debug routine.
2000-05-10 23:57:13 +00:00
a797322f08
supports single step!
2000-05-10 20:28:33 +00:00
mrg