a64a0f8137
ALTQ'ify.
2000-12-14 07:15:45 +00:00
d9d7c42e0c
Remove esp specific function from ddb when esp @ sbus is not included
...
in the kernel config. Makes compiling sbus-less kernels possible again.
2000-12-08 17:29:12 +00:00
245940b894
Clean up warnings in 32bit compile (bus_space_handle_t is 64bit wide
...
but will only contain 32bit values; casting via u_long is safe)
2000-12-04 20:17:10 +00:00
e58fff48bf
Avoid compile warning on sparc64 32bit. sc_buffer doesn't seem to be
...
used at all, this line can probably be removed.
2000-12-04 20:12:55 +00:00
2a50931a1c
Turn on TAG QUEUE support and add some debug stuff.
2000-12-03 23:31:13 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
55fd5a2fb0
Pass along the bus frequency too, for devices that need it.
2000-11-01 06:18:45 +00:00
34ed153955
Fix warning in a debug printf.
2000-11-01 06:17:32 +00:00
f9a51c7b15
Clean up a #define that doesn't belong. Oops. That's what I get for
...
working this late.
2000-10-31 08:06:14 +00:00
37486bb837
Get the bpp driver to work properly.
2000-10-31 06:32:06 +00:00
0a481d850d
fix SBus bursting *correctly* this time
2000-10-22 03:04:50 +00:00
0c6aa8d3ed
ensure DMA mappings are not mapped streamable. fixes ethernet problems on
...
ultrasparc sbus class machines. from eeh.
2000-10-20 06:08:02 +00:00
3af567c485
rework to use bus_dmamem_map() then bus_dmamem_load(), rather than
...
bus_dmamem_load_raw() then bus_dmamem_map().
tested on SS2 and SS5 and sbus cards.
2000-10-20 05:57:50 +00:00
cecccb23b2
quiet chatty boot messages
2000-10-17 17:39:10 +00:00
7cc31292b3
Turn on 32 byte bursting for ISP
2000-10-16 05:13:13 +00:00
aa6df7169b
yank error.
2000-09-12 19:13:30 +00:00
17e5f7b17c
Declare drivers moved here from arch/sparc.
2000-08-22 21:31:16 +00:00
d29f2ce630
Get tcxreg.h from the correct location.
2000-08-22 21:18:57 +00:00
124d256269
Move these SBus drivers here from arch/sparc.
2000-08-20 22:27:07 +00:00
5a308cf392
Split & move cgthree sbus attachment from arch/sparc.
2000-08-20 19:59:46 +00:00
7857ad0b81
Move cgsix and bwtwo Sbus attach code here from arch/sparc.
2000-08-20 14:33:25 +00:00
d8aef491c1
Add a maintenance note. Add a bus specific isp_sbus_intr function- this is
...
so we, ahem, note we're on an interrupt stack so we don't try and sleep
on any mailbox commands we might want to run.
2000-08-14 07:00:08 +00:00
068c76fc80
Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some
...
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
2000-08-01 23:55:09 +00:00
f9f72ecf9a
Purge C++-style comments.
2000-07-24 04:28:51 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
855b5ef9b0
Use new isp_handle_index inline function. Change order in whch
...
some things are done. Remember to enable interrupts after calling
isp_reset but before isp_attach.
2000-07-05 22:10:56 +00:00
261538ecac
remove include of <vm/vm.h>
2000-06-28 16:39:25 +00:00
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
f67e2cd132
Eliminate a race condition reported by mouse on port-sparc.
2000-06-14 08:01:26 +00:00
4371d91433
Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater
...
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
2000-06-05 07:59:50 +00:00
cffb580806
Implement the more flexiable `evcnt' interface as discussed (briefly) on
...
tech-kern and now documented in evcnt(9).
2000-06-04 19:14:14 +00:00
82dbe14248
No need to specify page alignment; this is automatic.
2000-05-10 14:25:43 +00:00
bb1605cff5
Fix bogus `boundary' argument in bus_dmamap_create().
2000-05-10 14:16:11 +00:00
2e595d79d8
Load DMA buffer before mapping it into kernel space.
2000-05-10 11:15:32 +00:00
18a16edec1
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 23:16:19 +00:00
1bf775b965
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 22:42:08 +00:00
dfe176302c
add some casts to (u_long) to shut up gcc
2000-04-14 08:22:49 +00:00
528bd4a794
Move esp declaration to conf/files.
2000-03-25 19:58:04 +00:00
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
9e16037265
Simplify the attach routine a bit.
2000-02-22 12:24:53 +00:00
b4e291e818
Fix some off-by-one errors; patch from Jonathan O'Brien.
2000-02-22 12:12:21 +00:00
6f13498242
correct oops on last checkin
2000-02-19 15:13:07 +00:00
a9697ee5f2
Handle > 12 byte CDBs.
2000-02-19 01:55:42 +00:00
a1b5434cec
Make promiscuous mode go again.
2000-02-14 17:06:45 +00:00
94b1e4084a
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:46:42 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
0e0104d0e9
There is no readily available tool to set NVRAM on isp's on sparc,
...
so ignore it.
2000-01-14 08:43:17 +00:00
78d457dc77
(stp4020_chip_mem_map): explicitly don't handle 8-bit memory
2000-01-13 10:03:25 +00:00
c6b6f3883a
Remove old-style boot device recognition.
2000-01-11 12:59:43 +00:00
2a7d01e353
The trigger for not downloading f/w is now a
...
NULL f/w pointer, not a nonzero f/w length.
2000-01-09 18:55:11 +00:00
250a1f41c2
The sense of being able to sleep for DMA resources was reversed. Oops.
2000-01-09 18:44:40 +00:00
2afd4d3aec
* remove full duplex modes for the internal transceiver
...
* internal transceiver needs to be reset for the BMSR_LINK bit to
be even remotely reliable
* because of previous, maintain link state, so we won't be sensing speed
all the time when interface flags need to be changed (e.g. entering/exiting
promiscuous mode)
* in auto-speed mode, report link condition changes on the console
1999-12-23 16:39:56 +00:00
7ab5ad7988
Streamline media code a bit by some `pseudo-mii' code designed to handle
...
the on-board transceiver.
1999-12-22 16:05:12 +00:00
f037f3be7e
Shuffle some code around to allow two PHYs to attach. Only one PHY can
...
be used at a time, but it's now possible to select one by using ifconfig(8)'s
`instance' parameter.
1999-12-21 21:07:42 +00:00
bbbbfe896e
* Remove spurious blockade in the path to get the transceiver status word.
...
* Make sure to flip the 10baseT/100baseTX bit when doing autoselect.
* Miscellaneous cosmetics.
1999-12-20 22:23:39 +00:00
d135edf1a7
#define the bit positions of the MIF I/O lines.
1999-12-20 22:19:11 +00:00
5babd2b8c9
get back to looking at config flags
1999-12-20 00:49:58 +00:00
e6da5abb16
Add back in inclusion of microcode and rationalize it. request/response
...
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
4bdf6bd731
Call mii_down() as appropriate.
1999-11-12 18:14:17 +00:00
23c39b410d
Fix some diagnostic output with a patch from Jonathan O'Brien.
1999-11-05 19:00:44 +00:00
bd0928e723
find "SUNW,hme" as well as "hme". this matches the onboard
...
ultra2 hme. haven't actually tested this beyond it probing
because my scsibus is hanging. anyway, it reports:
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
6bbb170768
We alloc xflist and dma maps in mailbox setup. We swizzle endian stuff
...
at the end of dma setup.
1999-10-14 02:16:04 +00:00
63b8530b4e
Update for SCSPI changes.
1999-09-30 23:04:39 +00:00
7b3258b6a7
Make the kthread API a bit more friendly to loadable kernel modules.
1999-07-06 21:44:09 +00:00
a7e4d3ac4d
Add the Sbus front-end for the HME driver.
1999-06-27 12:47:52 +00:00
4f2e48c4d2
Don't turn on the engine too early.
...
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
9335333dee
Issue a reset command when initializing.
1999-06-24 19:56:51 +00:00
67cbdf5623
split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different.
1999-06-05 14:29:10 +00:00
61e5d73035
Fix bus_size_t/size_t/int confusion.
1999-05-27 14:22:28 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
f5af676456
white space.
1999-05-16 14:47:52 +00:00
569836a986
It is no longer necessary to protect bus_dma_[un]load() at splbio, since
...
sparc bus_dma*() functions now protect their own internals..
1999-04-25 10:40:53 +00:00
52db3a158e
Correct QESTAT `%b' format string.
1999-04-20 20:24:39 +00:00
401d03761f
Initialize automatics in stp4020print(); noticed by Jonathan O'Brien.
1999-03-29 21:30:48 +00:00
5ecfcfbb96
Make `sun4m DMA not supported yet' message print only for this device,
...
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
d8aa229a12
roll internal release tag
1999-03-26 22:45:17 +00:00
3cafeadabd
Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
...
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
54ae4d24b8
Call bus_dma_[un]load() at splbio.
1999-03-23 00:38:15 +00:00
d86e93c62a
Fix promiscuous modes - patches from Jason Wright.
1999-03-23 00:27:09 +00:00
b71ea6aad4
Use correctly bus_space_*() macros to access device registers.
1999-03-19 02:32:48 +00:00
c312dfb410
prototype 1080/1240 support caused register offset rewhack
1999-03-17 06:17:16 +00:00
fbda6bed6d
make this compile on SUN4U. XXX icky, reader beware.
1999-03-09 00:42:20 +00:00
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
331694119a
Our device name differs from the PROMs node name.
1999-02-27 13:17:08 +00:00
c6c74098d0
Don't try to use the MII routines for the internal PHY.
1999-02-19 14:57:00 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
1a911bb798
roll internal release level
1999-02-09 00:54:07 +00:00
4553ce553c
use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h>
1999-02-03 06:03:37 +00:00
5c5ac2958f
roll internal release tag and finally use bus_space I/O
1999-01-30 07:10:38 +00:00
2fa7bdbccd
Fix AF_NS code.
1999-01-18 13:29:01 +00:00
fb846bde24
Share ring buffer code and data structure for `be' and `qe' in
...
the QEC module. Adapt the QEC interrupt establish code to suit the
needs of the `qe' device.
1999-01-17 20:47:50 +00:00
ad3176f350
Add `qe' network interface device.
1999-01-17 20:44:58 +00:00
5e8fcd9428
Import Jason Wright's Sbus Quad ethernet (`qe') driver as found in OpenBSD.
...
Heavily pounded on by me to make it fit our driver model.
Also added: auto media selection; shared ring buffer code with `be'.
1999-01-17 20:44:18 +00:00
6d1f55bc7a
Initial revision
1999-01-16 13:19:11 +00:00
thorpej