4c8828e743
init `mode' field in sunaudiogetinfo().
1995-05-04 19:46:31 +00:00
7d244351cf
Add `evcnt' field.
1995-05-04 19:43:27 +00:00
089ab8e266
define audio `evcnt' field.
1995-05-04 19:42:36 +00:00
9e61204b61
Tally interrupts.
1995-05-04 19:41:35 +00:00
2e0e8fc49d
use the machine-independent definitions for the mc146818.
...
wrap the various uses of the chip (including the uses of the NVRAM on it)
around the new defintions, structures, and functions specified in the header.
1995-05-04 19:39:08 +00:00
7153343684
two cases to quiet the compiler. perhaps should be fixed differently.
1995-05-04 19:35:20 +00:00
5d25b2c50e
machine-independent definitions for the Motorola MC146818A Real Time Clock
...
and compatible chips, including the Dallas Semicontuctor DS1287A.
This chip is used in PC's, DECstations, and Alphas, at least...
1995-05-04 19:31:18 +00:00
40b72cc7a2
Wrap NGDT and NLDT in parens.
1995-05-04 05:37:39 +00:00
78356f06b3
Add two vprint()s, to give more informative panic messages.
1995-05-04 03:11:06 +00:00
0175317fc3
If we decide to use IRQ 13, explicitly turn off CR0_NE to be sure.
1995-05-04 00:30:56 +00:00
94f4346537
Update a comment to match that last change.
1995-05-04 00:20:40 +00:00
f0a42753e4
npxinit() should not be called during autoconfig now. Watch for this
...
condition.
1995-05-04 00:16:40 +00:00
e03a827a0a
Move some comments from before npxsave1() to before npxsave().
1995-05-04 00:00:25 +00:00
bfef4c14c5
Slight rearrangement, to make the TS handling easier to follow.
1995-05-03 23:09:37 +00:00
99224602b4
Only dump the FPU state if the process actually used the FPU.
1995-05-03 23:05:46 +00:00
011aa68805
looks like some extra ')'s were left in here.
1995-05-03 21:38:57 +00:00
d23aebf3bb
Fix pccnpollc().
1995-05-03 20:46:32 +00:00
a412d4803c
mtpr support for 11/780 added. DELAY added. mcount() corrected.
...
trapframe fixed to support all registers.
1995-05-03 19:53:40 +00:00
1d2f0bce2a
Make the byte-shifting code consistent.
1995-05-03 19:38:45 +00:00
35d394d7e4
Changed conf.c to new style. Took away double saving of regs in traps.
...
Changed boot() to use vfs_shutdown(). Updated setregs.
1995-05-03 19:20:09 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
6db4e1b58a
By default, don't frob the ICU masks here. The software masking should
...
be sufficient.
1995-05-03 14:31:35 +00:00
c6a24163a3
Use Alpha cdefs.h
1995-05-03 06:04:54 +00:00
f57d609a52
Use PCB_USEDFPU, and a small performance tweak.
1995-05-03 00:17:16 +00:00
66927585fc
make an __indr_references macro, that expands to nothing...
1995-05-03 00:13:55 +00:00
e772f7c5ef
Set PCB_USEDFPU.
1995-05-03 00:09:13 +00:00
029176e96b
Add PCB_USEDFPU.
1995-05-03 00:08:19 +00:00
64b99b333d
The pmax 3100 interrupt-init code is broken: cpu_startup() enables
...
interrupts before it calls configure(). On 3100s, this can result in
the ethernet interface interrupting before leprobe() is ever called.
Be a bit more defensive in leintr(), where it was dereferencing a null
pointer. This reputedly fixes the oft-reported problems of 3100s not
ooting unless they're on an idle net or had a hard reset done before boot.
(Reworking the config code completely would be nice too.)
1995-05-02 20:00:09 +00:00
be2c7f3d13
If we panic inside trap(), Do a stack traceback before printing the trap log.
...
Also change the stack-traceback code to avoid having multiple returns
(and thus multiple stack pops) because with gcc -O2 that breaks the
heuristic that a "jr ra" preceding the PC precedes code to push the
current stack frame. Which breaks stacktrace() before it even
traces past itself :-(. Use a goto instead.
1995-05-02 19:51:52 +00:00
0c8be3a288
Make sure kbdopen() ships the keyboard reset cmd.
1995-05-02 07:56:42 +00:00
176d4dd6e5
Added -T option.
1995-05-02 05:54:28 +00:00
3d9ffd41f3
make this work sanely on a 64-bit machine. Sacrifices a small bit of
...
error checking in the DIAGNOSTIC case. These changes might be backed out,
if it's decided that MINBUCKET should be 5 (rather than 4) on the alpha.
However, doing that has its own set of nasty consequences.
1995-05-01 22:39:11 +00:00
2581c66077
remember first error code (if any) that's different than ENOEXEC.
...
Not perfect, but there's no perfect solution to the "multiple interesting
error codes" problem.
1995-05-01 22:36:45 +00:00
73fead01fc
Fix typos.
1995-05-01 19:45:42 +00:00
1ff4bb49de
Adjust for new defn of md_regs.
1995-05-01 19:33:17 +00:00
bc5a1863db
Declare sigcode and esigcode.
1995-05-01 19:01:45 +00:00
edab8dc1d9
Oops, took out a bit too much
1995-05-01 17:35:45 +00:00
7bada980a5
Oops. Undo some console code checkins that didn't belong.
1995-05-01 17:22:20 +00:00
88f28c3996
Fix typo.
1995-05-01 14:19:14 +00:00
8792c8e284
Save and restore %fs and %gs across signals.
1995-05-01 14:15:07 +00:00
4eea138a48
Add sc_gs and sc_fs. Move sc_onstack and sc_mask to end.
1995-05-01 14:14:11 +00:00
c78dd5a369
New location & definitions for audio driver.
1995-05-01 14:13:45 +00:00
bbfcbb8483
Add VM86 segment registers to trapframe.
1995-05-01 14:13:26 +00:00
cef0c43dee
Stylistic changes, and we don't need KERNEL any more.
1995-05-01 13:16:16 +00:00
c55ef2fd64
Always reload the LDT iff we reallocated its storage.
1995-05-01 13:13:20 +00:00
953e339aa0
Stylistic changes tp cpu_exit().
1995-05-01 13:09:43 +00:00
f745c10020
Eliminate _gsel_tss and _default_ldt.
1995-05-01 13:02:24 +00:00
e5d7ebde66
Update to match include files.
1995-05-01 11:07:40 +00:00
0ea347bf51
Update for changes in segments.h.
1995-05-01 10:43:01 +00:00
bce8e94dd2
Correct comments in gdt_segs[] and ldt_segs[] initializers.
1995-05-01 09:08:27 +00:00
5d17674312
Remove IdlePTD.
1995-05-01 08:53:13 +00:00
87b25c7f5c
Update to match include files. Eliminate _ucodesel, _udatasel, and IdlePTD.
1995-05-01 08:25:30 +00:00
ae11bd216c
Remove historical garbage.
1995-05-01 08:14:25 +00:00
17dd9534bf
Update to match include files. Eliminate _ucodesel, _udatasel, and IdlePTD.
1995-05-01 08:06:22 +00:00
5a7e987371
Make md_regs a pointer to a trapframe.
1995-05-01 07:56:20 +00:00
f32276958e
Use segments.h, and some other cleanup.
1995-05-01 07:55:21 +00:00
33e0286648
Remove PCB_SAVEFPU.
1995-05-01 07:55:04 +00:00
8b51849f9d
Make this includable from locore. Remove unused GDT and LDT slots.
1995-05-01 07:37:43 +00:00
c2e46efab2
Rename ibcs2_sigflags to __spare, but leave the space for now.
1995-05-01 04:53:24 +00:00
7688f4456e
Remove usages of ibcs_sigflags.
1995-05-01 04:50:28 +00:00
92e9818c88
Expose idt[] here.
1995-05-01 04:49:51 +00:00
b8d3de2758
Add pcb_cr0.
1995-05-01 04:49:28 +00:00
17a5f987ba
Be more aggressive about lazy saving and initialization.
1995-05-01 04:47:43 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
f55c4a0a19
Another trivial optimization.
1995-05-01 01:24:04 +00:00
34e5f975f9
Don't set mrg vectors if we're using the serial console--this allows
...
machines w/ non-working desktop bus to actually get on with booting.
1995-04-30 17:01:06 +00:00
58cd4c0a1d
Get 68040 defines in line with other 68k ports so libkvm/kvm_m68k.c compiles
...
cleanly.
1995-04-30 14:02:12 +00:00
f677a89489
Small changes in dma locking code.
1995-04-30 12:06:01 +00:00
12c60f7bc0
Complete rewrite, made necessary because Falcon SCSI needs to share
...
NCR5380 and DMA access with floppy.
1995-04-30 12:04:48 +00:00
e95337c226
Added lock status bits, update function prototypes.
1995-04-30 12:02:03 +00:00
fb4939eddf
Moved softint definitions still in cpu.h into mtpr.h and did some minor
...
cleanups.
1995-04-30 12:00:31 +00:00
8996e3866b
- Move softint definitions to mtpr.h
...
- Add flags for TT/Falcon model for machineid, we definitely need them
1995-04-30 11:56:22 +00:00
4d059559f7
resurrect, and move files.pmax.newconf to new location.
1995-04-30 10:11:00 +00:00
14b1452a90
kill unnecessary blank line at end of file
1995-04-30 07:03:13 +00:00
b835913465
first arg to open() is a 'const char *'. pointed out by David Brownlee
...
in pr 1004.
1995-04-30 03:57:54 +00:00
9b7c37148b
new-config files list. missed this yesterday.
1995-04-30 02:44:44 +00:00
fb9f07db36
Update MIPS stack backtrace code to trace through locore functions,
...
traps, and interrupts The earlier (4.4bsd) code didn't do the first two, and
got the last one wrong. Also print some functions (e.g., trap handlers)
by name. Add hook to use something other than printf() as the output
function, e.g,. for kernel debugging.
Tested with the `native' toolset, but not ELF format kernels.
(i.e., unwinding the $GP register is not tested.)
The stack backtrace code that interprets and unwinds stackframes is still
opaque and stylistically awkward.
1995-04-29 21:10:31 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
7cc5a0ed42
make FLT_ROUNDS call __flt_rounds, so dynamic rounding mode is grabbed.
1995-04-29 05:45:44 +00:00
c075955b09
kill historical cruft
1995-04-29 01:56:59 +00:00
18d9d7e5ef
first cut of the alpha version.
1995-04-29 01:09:17 +00:00
f54398dae4
Add prototype (new-style) config for pmax. This doesn't yet work;
...
auto-configuration initialization code is missing. It uses "needs-count"
flags to come slightly close to what the old-style pmax source expects.
Perhaps autoconfig code can be lifted from the alpha port or volunteers
found to write some.
1995-04-28 23:34:39 +00:00
b2c7420e5a
Fix performance bug in pmax MachFlushDCache(). Old code disabled icache
...
and wasn't unrolled. This code runs cached and unrolled, giving an order
of magnitude improvement in some cases (e.g., DMA-capable network devices).
In use at Stanford DSG since late January 1995.
1995-04-28 23:17:51 +00:00
0cd2332f66
sigcode is svr4_sigcode
1995-04-28 23:11:37 +00:00
026a077a5d
Check in source code actually containing changes in previous log message--
...
fixes to turbochannel-based DECstation interrupt enabling.
(I hate network firewalls that break rsh and remote CVS.)
1995-04-28 22:50:29 +00:00
ac3b1189c1
ns32k specific portions of ieeefp.h (fp_rnd, fp_except, constants, etc.).
1995-04-28 22:01:25 +00:00
7fea99983f
Changed FLT_ROUNDS from constant to a call to __flt_rounds(), so that the
...
current rounding mode is accurately reported.
1995-04-28 21:58:57 +00:00
523e8bccbc
Fix hardware interrupt-mask setup in the 5k/240 (3max)+ interrupt handler.
...
(A similar fix needs to be applied to the 3min and xine handlers.
This fixes a long-standing problem when booting with a card that
wants to interrupt (e.g., a network interface) would have interrupts
enabled before a handler was set up.
Add interrupt-counting code to model-independent interrupt handler,
and 3max (5k/200) and 3max+ (5k/240) md handlers, for vmstat -i.
Similar changes for 3min and xine are obvious but not done.
Add code for 5k/240 to read, and latch, the current value of the
IOASIC bus-cycle counter at each timer interrupt. The latched
counter is needed to accurately interpolate the bus-cycle counter value
as a high-resolution clock.
1995-04-28 21:48:11 +00:00
9dde470095
- Remove cpuspeed
...
- Remove dead code (stmem_steal())
- Use round_page() on st_pool_size before using. This prevents crashes
when it is 'binpatched' with a value that is not a multiple of the
page size.
1995-04-28 11:41:53 +00:00
d3056f9136
CD-ROM drives added.
1995-04-28 11:36:33 +00:00
cd29a7f291
Better way to select a display mode?
1995-04-28 11:34:33 +00:00
d3bb44e8f2
Made no_ttram_dma patchable instead of a define.
1995-04-28 11:33:01 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
07992ead4b
Add memory-mapped address of the IO ASIC TurboChannel bus-cycle counter,
...
as present on 5k/2xx and Alpha IOASICs. Older machines may or may not
have the hardware counter. To be used as a high-resolution DECstation clock.
1995-04-28 04:44:21 +00:00
ef8023a47b
Check in changes suggested by Ralph Campbell: update variable names
...
to use turbochannel slot numbers, add a couple of extra slots, just
in case.
1995-04-28 03:10:41 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
59f33bea48
Add sfb device driver
1995-04-27 20:52:39 +00:00
ecec677e0c
Removed cpuspeed
1995-04-27 20:34:13 +00:00
a9313f09e4
Speed up handling of short and/or misaligned mbufs significantly. No change
...
in the `normal' cases.
1995-04-27 17:18:22 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
1138c9d047
Handle KIOC[GS]LED ioctls; from Lon Willett.
1995-04-27 14:27:11 +00:00
9cc011e7a1
Use new files.sunos and old files.svr4 :-)
1995-04-27 12:16:31 +00:00
843a2a3539
Use new files.sunos
1995-04-27 12:08:54 +00:00
b9771ef7b1
Try to make the reboot system call compile under sun3 with RB_STRING
...
support [not tested]
Add files.sunos
Rename system call switch table file from sunos_init_sysent.c to sunos_sysent.c
like other emulations.
1995-04-27 12:05:37 +00:00
b9c4f23337
needs-count => needs-flag
1995-04-27 07:26:08 +00:00
042a0e2c63
remove warnings in pmap.c
1995-04-27 07:19:09 +00:00
83e651c4c4
scntty & reorg using softc stuff.
1995-04-27 07:18:02 +00:00
a186461a00
conf.c: ptstty ...
...
machdep.c: setregs parameter type change, remove warnings
process_machdep.c, pmap.c : remove warnings
1995-04-27 07:16:31 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
63fcfd3c89
Disable the cache stuff for now. Add more comments.
1995-04-26 23:42:35 +00:00
a72c4b5e5d
SUNOS_SYS_sigreturn -> SUNOS_SYS_sunos_sigreturn
...
Also, add check for trap during panic.
1995-04-26 23:39:04 +00:00
c75b9fd69a
Avoid null reference with unsupported configurations.
1995-04-26 23:30:08 +00:00
8ba352c1a9
Use vfs_shutdown()
1995-04-26 23:25:26 +00:00
cc9cf5119d
pt_tty -> ptytty
1995-04-26 23:24:13 +00:00
db42cb9416
Some corrections for cache control. Still needs work...
1995-04-26 23:23:20 +00:00
ac1a62db29
Add xxtty()
1995-04-26 23:20:15 +00:00
6d7bcdbd2a
Add work-around for LANCE Rev. C bug.
...
Needs to be fixed for multicasts...
1995-04-26 23:19:16 +00:00
f4d7b9097d
Make sunos_reboot(RB_STRING,"...") work for sun3.
...
Could be made to work for sparc too.
1995-04-26 23:12:02 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
d4f78febcf
define LED controls
1995-04-26 14:24:54 +00:00
a1175c74a0
Fast checksummer from Matthew Green.
1995-04-26 13:30:03 +00:00
7dbfb9ead9
Macroize a few more things; suggested by Matt Green. Cast pointers to long,
...
not int. No functional differences.
1995-04-26 09:40:36 +00:00
4c3aafc732
Fix typo in previous changes.
1995-04-26 00:00:23 +00:00
7a2ec6be4b
Make this compile again...
1995-04-25 21:57:10 +00:00
43da4827ae
sigcode and esigcode aren't defined for ultrix emulation
1995-04-25 21:51:15 +00:00
2ca157b084
Make this compile again; from Ted Lemon
1995-04-25 21:10:01 +00:00
eb8a2e27a0
New audio driver.
1995-04-25 20:08:13 +00:00
794f74a0cf
Audio driver name change.
1995-04-25 20:07:10 +00:00
8d90aefeb0
New audio driver from Rolf Grossmann.
1995-04-25 20:05:32 +00:00
e9177420ca
NetBSD RCSid
1995-04-25 20:01:23 +00:00
6d68e2f26f
Remove duplication of code from subr_autoconf.c
1995-04-25 19:59:49 +00:00
1992309f8b
Fix a few compat code casualties
1995-04-25 19:16:43 +00:00
7c7142b1cf
status report
1995-04-25 18:59:14 +00:00
4061570286
Add 'users to-do list'
1995-04-25 18:16:15 +00:00
700118da76
Stop-gap measure to prevent panic when select()ing on /dev/console.
1995-04-25 17:52:43 +00:00
64f2d35a0f
Do not report each pseudo-DMA overrun as a (soft) error.
...
Add a small heuristic to converge on an acceptable threshold value.
1995-04-25 14:44:44 +00:00
589f248bad
Cleanup and fixes for uVAX boot.
1995-04-25 14:14:19 +00:00
3eca8117f7
Fix up args to scdebug_{call,ret}
1995-04-25 05:30:14 +00:00
d73db495da
Fixed RPC code to deal with RPC messages larger than one mbuf.
1995-04-24 21:54:56 +00:00
e49b0de53f
short -> int (alignment)
1995-04-24 21:34:04 +00:00
6404739df8
AMD9730 telephony chip (used to be sparc/dev/bsd_audioreg.h).
1995-04-24 19:17:17 +00:00
30f71c550f
A couple of fixes frm Rolf Grossmann.
1995-04-24 19:13:52 +00:00
fab3d7b117
kill a bogus NOTREACHED, fix spacing
1995-04-24 06:24:19 +00:00
df9af2897a
bring up-to-date with recent conf.c and sunos changes.
1995-04-23 18:24:21 +00:00
10eb24c459
add needed signal debug stuff so it will compile with DEBUG
1995-04-23 18:22:14 +00:00
35bb9b1ffd
new grfcl driver submitted by Ezra Story <ezy@panix.com>
1995-04-23 16:20:43 +00:00
c937b8a519
Fix compiler error in sunos_reboot().
1995-04-23 01:00:46 +00:00
a2bc99d6f1
Make these compile again.
1995-04-23 00:37:23 +00:00
11632db942
Make this actually compile...
1995-04-23 00:27:48 +00:00
79e736e176
syscalls.master was changed
1995-04-22 23:48:37 +00:00
ebdad87ea2
Added sunos_reboot().
1995-04-22 23:45:29 +00:00
00e1cff41a
Shared sunos_machdep.c
1995-04-22 23:43:07 +00:00
5f162d51b1
Moved sunos_machdep.c to m68k
1995-04-22 23:41:32 +00:00
545f388282
Removed sunos_machdep.c
1995-04-22 23:40:24 +00:00
94289bf2b0
Move sunos_machdep.c to m68k
1995-04-22 23:39:02 +00:00
4bca9bf670
Remove sunos_machdep.c
1995-04-22 23:38:27 +00:00
1d807c1a1d
move sunos_compat.c to m68k
1995-04-22 23:36:56 +00:00
ac9454c2e1
remove sunos_machdep.c
1995-04-22 23:36:10 +00:00
6cdccaf3ed
Remove sunos_machdep.c and fix sunos_reboot.
1995-04-22 23:23:58 +00:00
03df025c9d
Change allocation algorithm to best-fit, fix bug in free_stmem.
1995-04-22 22:23:38 +00:00
8e56abf0fa
Define DELAY to call delay()
1995-04-22 22:20:36 +00:00
3517d2e5ac
- Prefix 'dma-defines' with DMA_
...
- Add function prototypes
1995-04-22 22:18:57 +00:00
dcdee517ef
- Remove register access functions from dma.c -> fd.c and inline them
...
- Add write protect checking (mistereously disapeared during port)
- Make fdclose() return a sensible value
- Prefix 'dma-defines' with DMA_
1995-04-22 22:18:17 +00:00
e8312d3ac3
Adapt for new conf.h:
...
- Add xxxtty() functions
- Remove xxx_tty array
1995-04-22 22:06:43 +00:00
c9a522cd2b
Adapt for new conf.h.
1995-04-22 22:05:17 +00:00
4bf1b61d8f
Convert sun_ to sunos_ and fix sunos_sigreturn() bugs.
1995-04-22 21:23:18 +00:00
c5f01c2a4c
Fixed comparison in SYS__syscall to be against sysent instead of
...
p->p_emul->e_sysent [Thanks Charles for pointing this out].
I think that this code needs to be fixed anyway for emulations where
SYS_syscall is not the same number as the NetBSD one (0)... (Only the
alpha port so far?)
1995-04-22 20:49:06 +00:00
de42a28a1b
- added sunos_machdep.c for sun3, atari, amiga and mac68k.
...
- changed machdep.c and trap.c to use struct emul.
- remove ep_setup references.
- added struct emul to all emulations.
1995-04-22 20:24:40 +00:00
44eef7c28b
- added struct emul to all emulations.
...
- removed all setup functions.
- added copyargs() functions where needed.
1995-04-22 19:48:19 +00:00
2a83f6028f
makesyscalls.sh was changed.
1995-04-22 19:44:38 +00:00
1c1cf96baf
makesyscalls.sh was changed
1995-04-22 19:43:50 +00:00
3d1b06ab09
- new copyargs routine.
...
- use emul_xxx
- deprecate nsysent; use constant SYS_MAXSYSCALL instead.
- deprecate ep_setup
- call sendsig and setregs indirectly.
1995-04-22 19:42:47 +00:00
9575475067
- new struct emul for OS emulations.
...
- deprecated exec_setup_fcn
- deprecated EMUL_???
- added sunos_machdep.c for the m68k ports.
1995-04-22 19:40:29 +00:00
b439a787bc
kill a host of null dereference bugs... tracking down a _different_ bug,
...
i was getting "KSP INVALID" death. It was being cause by never-ending
MM faults, caused by null derefs (of curproc) in the MM fault trap
handler. the original MM fault was caused by a null deref (of
curproc, again) in the unaligned access handler!
1995-04-22 16:59:47 +00:00
5fe7be7a26
be a little smarter when printing syscall names & args
1995-04-22 14:17:18 +00:00
a24d2f6e17
cast pointers to longs, print appropriately
1995-04-22 14:10:10 +00:00
b94f71c618
prototype strlen; shouldn't be here.
1995-04-22 14:09:29 +00:00
29038d1929
cast pointers to longs
1995-04-22 14:09:00 +00:00
f8e4de6a7a
ints and pointers of various types are _NOT_ interchangable in protos
1995-04-22 14:07:54 +00:00
01208c85a3
cast pointers to longs, kill stupid local var return error, types.
1995-04-22 14:01:40 +00:00
586427643d
various attribute poisoning, don't be as quick to specify size of files[]
1995-04-22 13:57:03 +00:00
4316c36ca7
cast pointers to longs
1995-04-22 13:53:48 +00:00
07231e5b52
note properly whether or not functions return, etc.
1995-04-22 13:51:19 +00:00
60b1ffa877
cast ptrs to longs, etc.
1995-04-22 13:50:27 +00:00
06b2dbd4dd
cast ptrs to longs.
1995-04-22 13:47:52 +00:00
84d0d2f495
various type fixups
1995-04-22 13:46:50 +00:00
239425ba96
cast pointers to longs, not ints
1995-04-22 13:29:33 +00:00
c7d6aa46d5
copy routines should take size_t lengths for prototype consistency.
...
don't assume that tick is >= 1000; loses badly on alpha (div. by zero)
only try unaligned copies if NetBSD's UNALIGNED_ACCESS symbol is defined.
various misc type size cleanups, mostly short -> int16_t.
1995-04-22 13:26:20 +00:00
74b3f483db
Define DELAY.
1995-04-22 13:17:51 +00:00
b5fb8715b0
quiet compiler warning via (ugly) cast
1995-04-22 13:08:30 +00:00
92fad4a481
be more careful when rounding sockaddr_dl sizes. also, one u_short * ->
...
u_int16_t * conversion.
1995-04-22 13:07:12 +00:00
725dc02e10
make tcflag_t an unsigned int (rather than unsigned long; alpha)
...
make tcflag_t an unsigned int (rather than long; alpha, POSIX)
make c_?speed members of struct termios be ints (rather than longs; alpha)
1995-04-22 13:03:10 +00:00
87725ecb8b
use explicit type sizes for most data
1995-04-22 12:55:10 +00:00
a67f72b7d6
kernel config files for jura.pdl.cs.cmu.edu and scapa.pdl.cs.cmu.edu,
...
the DECpc AXP 150 and the AlphaStation 400 4/233 in my office.
NEITHER TYPE OF MACHINE WORKS YET, and i'm not even going to be
working on the DECpc AXP 150 support any more.
1995-04-22 12:47:54 +00:00
de324e173a
clean up, change drive -> lun for mi scsi files description.
1995-04-22 12:46:06 +00:00
7a43f1fdc7
clean up a bit, use MI files lists. add a bunch of comments.
...
Also, include the EISA, ISA, and PCI files lists.
1995-04-22 12:45:08 +00:00
387a2d7ee1
kill some non-gnu-tools cruft, allow rest of programs to be parameterized
1995-04-22 12:44:08 +00:00
82315c022a
get rid of bogus header inclusions
1995-04-22 12:43:22 +00:00
993d5501b3
promcnputc now returns void
1995-04-22 12:42:51 +00:00
12dae0a656
add option HALTLOOP to loop in boot() instead of halting/rebooting
1995-04-22 12:42:01 +00:00
71fa065268
deal with renamed header file.
1995-04-22 12:41:05 +00:00
97cd254342
console putc returns void
1995-04-22 12:35:17 +00:00
610d597217
adjust for networking code changes
1995-04-22 12:34:15 +00:00
a992a8136c
Add some multicast byteorder-related changes from djh@mulga.cs.mu.OZ.AU.
1995-04-22 12:08:12 +00:00
dda57ad059
Use vfs_shutdown().
1995-04-22 11:53:40 +00:00
d923e0ed9b
Use vfs_shutdown().
1995-04-22 10:00:50 +00:00
1778fc8e4a
eserve the equality "x == y*(x/y)+(x%y)" for negative y; from Lon Willett.
1995-04-22 09:37:39 +00:00
20cf41aa94
Clean this up a bit:
...
* Abstract the conditional for immediate port numbers, and make it always
false if not optimizing.
* Add some whitespace to the string functions to make them more readable.
1995-04-22 03:59:59 +00:00
ca88acc618
Fix an oversight.
1995-04-22 01:25:41 +00:00
fb82503a03
Fix some outdated comments.
1995-04-22 00:58:19 +00:00
c78d8f5e0b
Replace btl with testl.
1995-04-22 00:54:21 +00:00
4cd20dfe0a
Move some comments to more appropriate places.
1995-04-22 00:30:47 +00:00
71d223dc04
Add dummy fb device driver reference for compatibility with conf.c changes
1995-04-21 23:58:36 +00:00
acc8d94430
Oops, still need to set waittime...
1995-04-21 23:04:32 +00:00
9e9c03fe49
Add this so "make cleandir" will work.
...
(Thanks to Kenneth Stailey)
1995-04-21 22:55:01 +00:00
88603eca8f
Use vfs_shutdown to sync disks...
1995-04-21 22:16:01 +00:00
954487037b
Rearrange vfs_shutdown() slightly.
1995-04-21 22:09:53 +00:00
84f803aef6
Add a return type for vaccess().
1995-04-21 22:03:24 +00:00
277d7e6f32
Add prototype for vfs_shutdown().
1995-04-21 21:59:41 +00:00
9dbd0e8627
Use vfs_shutdown().
1995-04-21 21:56:59 +00:00
b4813fa24a
Alias delay() to DELAY() for mi code.
1995-04-21 21:56:01 +00:00
f51cb8c974
Print a message for each file system that does not unmount cleanly. Add a
...
vfs_shutdown() routine that does the unmount and sync.
1995-04-21 21:55:11 +00:00
92509d125f
Add support for clean flag
1995-04-21 20:54:04 +00:00
83d1965cc0
Remove the "#if 0" around vfs_unmountall().
1995-04-21 20:20:15 +00:00
b5eab728c1
Make this compile again.
1995-04-21 19:44:52 +00:00
c42a783b23
Add scncnpollc.
1995-04-21 18:36:32 +00:00
87beda7b2a
Implement zstty().
1995-04-21 15:51:26 +00:00
532a15a74e
sync with sys/conf.h
1995-04-21 15:50:06 +00:00
9e1f939930
Get rid of old file from hp300 origins!?
1995-04-21 11:35:15 +00:00
305ed29ba1
Remove profiling constants that are no longer needed.
1995-04-21 09:17:23 +00:00
bfab570cda
Add constants for some keyboard controller commands.
1995-04-21 09:16:16 +00:00
99a3edf2ea
Move cpu_reset() from vm_machdep.c to machdep.c, and make it more robust.
1995-04-21 09:15:23 +00:00
30e61f6c45
Make RB_KBD work again.
1995-04-21 07:56:40 +00:00
7d349f24fb
Clean up init386() a bit.
1995-04-21 07:53:52 +00:00
e530f4d515
Remove 486-specific CR0 changes into identifycpu().
1995-04-21 06:43:18 +00:00
e4ab9f94f9
Remove the (unused) extra mapping of the first 1MB. Undo the double-mapping
...
of the first 4MB earlier.
1995-04-21 06:23:51 +00:00
8190c2e3e7
Clean up hole conversion functions a little.
1995-04-21 05:21:37 +00:00
d3672cc33f
We need isa_machdep.h for now.
1995-04-21 05:10:02 +00:00
d3971b501d
Remove relocation of Crtat from locore.
1995-04-21 04:51:30 +00:00
5982b968a9
Enable nubus interrupts after registering.
1995-04-21 04:01:27 +00:00
7063b53b26
Separate nubus interrupt registry and enablement.
1995-04-21 04:00:55 +00:00
6bc53a2398
Handle grf_softc in the config.new manner.
...
Should have been done long ago.
1995-04-21 03:44:13 +00:00
13efb6c197
First pass of KNFication. Needs more.
1995-04-21 02:47:35 +00:00
6a233c363c
Fix up tty struct change from conf.h
1995-04-21 01:24:26 +00:00
07a0117e2a
Fix up tty struct changes
1995-04-21 01:21:06 +00:00
85025d789c
Prototype iteopen correctly (oversight from a while back...).
1995-04-20 15:46:56 +00:00
a6ba5f8f7e
Update to use softc better and handle mainbus being indirect.
1995-04-20 15:32:01 +00:00
8288b9238d
Make mainbus an indirect device--needs more work, but it does function.
1995-04-20 15:31:23 +00:00
64bd3f0995
Move to ptytty
...
Nuke the grf's reset space holder.
1995-04-20 15:30:22 +00:00
df693904cd
include mi scsi files file.
...
Change several devices from needs-count to needs-flag.
1995-04-20 15:28:54 +00:00
4137a8ff57
Add itetty().
1995-04-20 15:27:43 +00:00
a7f44caf1b
Add a sertty() and update to use ser_softc instead of a bunch of arrays
...
everywhere.
1995-04-20 15:27:12 +00:00
1286501d43
Grab the sun3 cpu_coredump().
1995-04-20 15:25:41 +00:00
6fbf1113f7
Fix a mycroft typo.
1995-04-20 07:16:30 +00:00
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
055a6395e0
Update to match conf.h
1995-04-19 22:37:27 +00:00
0ded4e4007
pttty -> ptytty
1995-04-19 22:35:40 +00:00
b92e5976ff
Rename pttty() to ptytty() to mimic ptyioctl().
1995-04-19 22:33:56 +00:00
44e9c73f2c
Update for global changes.
1995-04-19 22:16:30 +00:00
943618dbe5
Fix thinko in previous commit.
1995-04-19 22:08:08 +00:00
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
ac0d34236e
Fix typo.
1995-04-19 21:32:32 +00:00
6367e0730f
Use db_printsym() for calls and branches.
1995-04-19 21:24:29 +00:00
af16724ee9
Avoid dereffing a fuzzy NULL-pointer.
1995-04-19 20:59:29 +00:00
8854e7193d
Remove d_reset, and change the uses of d_ttys as appropriate.
1995-04-19 19:22:15 +00:00
f1e8ea1dcc
Kluge the *tty() routines until this port is converted to config.new.
1995-04-19 19:15:47 +00:00
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
5e398279f4
Using cloning specs for rtfps subdevices.
1995-04-19 19:08:52 +00:00
1f599fe30b
Using cloning specs for ast subdevices.
1995-04-19 19:07:33 +00:00
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
cdd1a8eb54
Fix typo.
1995-04-19 18:58:14 +00:00
7aaa443e99
Implement pttty(), and rename pt_ioctl to pt_softc.
1995-04-19 18:50:21 +00:00
20b6b4f24d
Change ttselect() to use a callback to get the tty structure.
1995-04-19 18:46:10 +00:00
aed68a1067
Implement pctty().
1995-04-19 18:33:27 +00:00
b665ddf808
Implement pctty().
1995-04-19 18:10:47 +00:00
8da89a0fc3
Fix leioctl declaration mismatch
1995-04-19 18:06:03 +00:00
cd09cbdae5
Remove d_reset. Replace d_ttys with a callback to the driver. Don't allow
...
select() on a framebuffer.
1995-04-19 18:04:57 +00:00
7945dde65c
leinit() returns void. Prototype more functions. Garbage collect some things
...
in leattach().
1995-04-19 16:23:11 +00:00
7345c91d2e
'twould help to unmount the filesystems, wouldn't it?
1995-04-19 14:01:58 +00:00
77c35a2e3b
allow boot from cdrom. from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-04-19 13:02:57 +00:00
3e80dca508
unomunt file systems when rebooting from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-04-19 12:54:32 +00:00
bd52caa035
probeset() was trashing its arguments; fix from Chuck Cranor.
1995-04-19 12:49:27 +00:00
72632df1e2
they've moved.
1995-04-19 09:00:29 +00:00
3ff27e09e2
fixes (mostly) from Jonathan Stone, to make this driver match the
...
state of the world as expected by the networking headers/mi code.
i changed one or two things in his patch slightly (do the lestart()
proto the right way, actually delete the if_output assignment line).
1995-04-19 06:56:21 +00:00
eb1375b9c2
fix my IPL level off-by-one. also, rename intr_disestablish to
...
isa_intr_disestablish like i meant to before.
1995-04-19 06:14:13 +00:00
bf68945da5
Define struct ae_ring which is necessary because BYTE_ORDER == BIG_ENDIAN,
...
but the card is in x86 byte order mode because NuBUS does the swap "for us"
on 16- and 32-bit transfers. We should probably figure some way to use
the std struct ed_ring if/when all the 8390 drivers are all fully merged.
1995-04-19 04:46:06 +00:00
2b1a13ab2f
Initialize totlen in ae_put. Thanks to chopps for pointing it out!
...
Also, switch back from using struct ed_ring to using struct ae_ring
because BYTE_ORDER == BIG_ENDIAN, but the card is in x86 byte order
mode because NuBUS does the swap "for us" on 16- and 32-bit transfers.
We should probably figure some way to use the std ed_ring if/when
all the 8390 drivers are all fully merged.
1995-04-19 04:43:36 +00:00
19c27da954
comment out the scd major declaration
1995-04-19 02:54:12 +00:00
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
6bb01cf7de
Remove deprecated md prober/probew/kernacc/useracc.
1995-04-19 01:17:11 +00:00
b7b88b1ba8
Typo.
1995-04-18 22:08:25 +00:00
52ecef9b87
Added missing #ifdef VAX750
1995-04-18 22:02:35 +00:00
dfcfbc4f03
Added VAX specific makefile. (In libkern/arch/vax)
1995-04-18 21:59:46 +00:00
1fe49b966e
Added prototypes for truncate() and ftruncate() along side the
...
prototype for lseek().
This *hack* should allow programs that use long instead of off_t for
file offsets and don't include <unistd.h> to work.
1995-04-18 18:02:44 +00:00
82120d943b
Finish updating for new interrupt registration mechanism.
1995-04-18 02:25:18 +00:00
8c65e4734d
Update setup functions for changes in exec.h.
1995-04-18 02:18:08 +00:00
8874fd61ca
Update to match generic ISA changes.
1995-04-18 00:59:53 +00:00
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
fa37f29dc8
Make some functions non-static.
1995-04-17 23:04:31 +00:00
1b8667f0aa
Add config for PSS
1995-04-17 22:44:38 +00:00
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
6495969b94
use included files wherever possible.
1995-04-17 16:58:14 +00:00
fac8a6879e
MI EISA config.new file lists
1995-04-17 16:15:48 +00:00
27228062f9
config.new file lists
1995-04-17 16:12:14 +00:00
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
8fe775c0de
useless, as of the new sound drivers.
1995-04-17 15:29:06 +00:00
dfeb819b45
move sound drivers to their proper homes.
1995-04-17 15:28:30 +00:00
cf1c3ea213
these belong in dev/isa; they're being moved there now.
1995-04-17 15:22:27 +00:00
c0caf19aac
oops; forgot to delete this with my ISA autoconfig changes earlier
1995-04-17 15:17:24 +00:00
dbd3d08cf0
set blocksize in adosfs_getattr(). fixes pr#968
1995-04-17 12:22:08 +00:00
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
78ec8e7701
terminate comment fixes pr#969
1995-04-17 11:50:36 +00:00
5f252bb8ea
config.new files description for PCI mi files.
1995-04-17 07:46:10 +00:00
236ef3f326
include PCI machine-independent files list
1995-04-17 07:45:29 +00:00
14d777dff7
allow most program names to be overridden. kill a bogus } in a comment, and
...
an unnecessary blank line.
1995-04-17 07:30:54 +00:00
5f2be04d8e
use CC="cc -Werror" for cc; kill bogus COMUNIT option
1995-04-17 07:23:50 +00:00
1b917f3802
use CC="cc -Werror" for cc
1995-04-17 07:23:34 +00:00
224a7f4533
config.new description of SCSI mi files.
1995-04-17 07:15:40 +00:00
c03b53c2e8
spacing cleaup. also, minor type mixup fixups.
1995-04-17 05:32:52 +00:00
172d108798
Added SSIZE_MAX, SIZE_T_MAX, UQUAD_MAX, QUAD_MAX and QUAD_MIN.
1995-04-16 20:10:33 +00:00
4d37095e31
Fix typo: ieefp.h -> ieeefp.h.
1995-04-16 16:47:03 +00:00
c9431dc99d
new driver from charles.
1995-04-16 15:16:07 +00:00
049520050c
Get RAMD_NDEV in sync with definitions in rd_info.
1995-04-16 14:59:03 +00:00
c0f4a40a61
Make it consistent with conf.c .
1995-04-16 14:56:25 +00:00
82aac3e84b
Changed '#endif KERNEL' -> '#endif /* _KERNEL */'.
1995-04-16 14:55:09 +00:00
c2e83d3290
Make it work after last week's changes.
1995-04-16 14:53:14 +00:00
7845638d97
Added maxpartitions.
1995-04-16 14:50:40 +00:00
99344526c3
Get TT-RAM sizes right, some more debug output added with -D option.
1995-04-16 14:47:58 +00:00
ef7ca50d54
Make less noise about CRC/Framing errors (Sun3/50 gets lots of them).
1995-04-16 01:52:07 +00:00
a914f4e306
typo
1995-04-16 01:50:45 +00:00
38cb076019
Get this working. Mainly, don't always round to word transfers on
...
receive.
1995-04-16 00:14:54 +00:00
edc749be89
cleanup; mostly KNF.
1995-04-15 10:35:24 +00:00
e342075694
ni_pathlen should be a size_t
1995-04-15 08:12:35 +00:00
5f41ce9281
Correct checks for NULLs in pagertab.
1995-04-15 05:11:35 +00:00
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
df052e72a6
clean up some return-type warnings
1995-04-15 01:57:35 +00:00
13f5026553
fix timeval vs. timespec warnings
1995-04-15 01:56:43 +00:00
eddc28046e
type changes; fix compiler warning caused by new netinet code
1995-04-15 01:55:45 +00:00
865e910590
Remove extra EMUL_IBCS2 case.
1995-04-14 23:30:54 +00:00
b88eec60bb
Allow opening a FIFO with O_RDWR.
1995-04-14 23:30:14 +00:00
51a977efdc
update doomed driver (i.e. its going to be replace soon)
1995-04-14 17:34:08 +00:00
4aa99e7423
bring up-to-date with recent chages (arpwhohas->arp_ifinit
...
and int xx_start->void xx_start)
1995-04-14 17:29:50 +00:00
999aa2cc32
update arc_input() proto to match reality.
1995-04-14 17:09:39 +00:00
5f90c17217
change args to arc_input also add check on link address which fixes pr#922. from Ignatios Souvatzis <is@beverly.rhein.de>
1995-04-14 17:06:39 +00:00
ed0da4a701
couple small changes plus a new watchdog timer from Ignatios Souvatzis <is@beverly.rhein.de>
1995-04-14 16:57:19 +00:00
7bf92538bb
prepare to enable the cache
1995-04-13 22:05:41 +00:00
pk