cf6323d778
Fixup comment.
1995-05-14 15:27:51 +00:00
e2b044e52f
- Remove double mapping of stack
...
- Change to new coredump format
1995-05-14 15:26:55 +00:00
72472e35b1
Remove double mapping of stack
1995-05-14 15:24:35 +00:00
92d594935c
- Remove double mapping of stack
...
- Change to new coredump format
1995-05-14 15:23:30 +00:00
d3e5e6574b
Fix double mapping of stack.
1995-05-14 15:20:22 +00:00
d25d16dd79
fix ITEIOC[GS]BELL and ITEIOCGREPT cases in iteioctl()
1995-05-14 14:26:00 +00:00
2c1e3c655f
drop (and record) malformed IP fragments. Fixes pr 1030 (differently).
1995-05-14 08:23:00 +00:00
d2d8deb3bb
make recent cpu_fork() changes more similar with hp300.
1995-05-13 05:57:25 +00:00
51731ce367
fix dumpmem
1995-05-13 05:17:56 +00:00
4175c2819f
Redo 3MAX+ (5k/240) interrupt enable code.
...
Instead of being a no-op, kn03_intr_enable() sets the sw copy of the
interrupt-enable mask *and* writes it into the IO asic intr-enable
register. Boot code sets the sw copy (kn03_tc_imask) to something
sane (KN03_IM0, with tc option slots turned off). Tested and works.
Interrupt code for other IOASIC machines should be redone so that
interrupts for devices are enabled by drivers, rather than by
cpu-specific boot code. Functions common to all IOASIC machines
(PSWARN?) should be done by asic_init().
Checked in without the above changes so that 3MAX+, MAXINE and 3MIN
interrupt-(enable,handle) can converge.
1995-05-12 23:27:23 +00:00
fc90442d14
add lots of vnds
1995-05-12 21:08:41 +00:00
af73578e82
Map the source page of a copy read-only.
1995-05-12 20:57:22 +00:00
76860a15b0
Add a child_return() function to clean up the child's state correctly, and
...
use this in cpu_fork(). Generalize proc_trampoline() so it can also be used in
this case.
1995-05-12 18:24:46 +00:00
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
0cb62c1cb4
added flsc and bzsc.
1995-05-12 13:09:17 +00:00
94cb5327ca
Stylistic change.
1995-05-12 13:04:33 +00:00
46426ac542
main() should never return.
1995-05-12 13:03:23 +00:00
21d667c8ab
scsi drivers for fastlane and blizzard controllers that use the
...
Emulex FAS216 chip. from Daniel Widenfalk <t94dwi@student.tdb.uu.se>
1995-05-12 12:59:05 +00:00
9877d5d787
Eliminate the double mapping of the kernel stack. Enable swapping.
1995-05-12 12:54:44 +00:00
7bf54feda1
Add vnd.
1995-05-12 12:49:54 +00:00
3d833a1ab1
Conditionalize the code in process_frame() on the existance of
...
cpu_set_init_frame().
1995-05-12 12:47:45 +00:00
c52debae3f
Redefine the first part of struct frame to be a struct trapframe, and add a
...
struct switchframe.
1995-05-12 12:45:24 +00:00
eb4cd26383
from the comments at the top of the file:
...
INSTALL -- somewhat generic kernel with a snowball's chance of
fitting on an install floppy.
This kernel MUST consist (for users' sanity) of a subset of
the GENERIC configuration. It also should support X reasonably
(though the SysV SHM extensions won't work).
To avoid a maintenance nightmare, this kernel consists of GENERIC
with missing options/devices/etc. REMOVED rather than commented
out. That makes it easy to diff agains GENERIC, to make sure that
it really is a subset of the functionality.
1995-05-12 03:19:51 +00:00
aeb93da3d7
Split FFS,QUOTA line, comment each individually.
...
Add 'options INSECURE' so that the GENERIC kernel is happy with
X's linear mapping.
1995-05-12 03:18:05 +00:00
c7b33abd2d
enable swapping of process
1995-05-12 00:21:54 +00:00
a15205fdbf
use stdframe from m68k/include/frame.h
1995-05-12 00:18:09 +00:00
4567f74662
add stdframe (4-word frame)
1995-05-12 00:01:05 +00:00
2526492410
fix typo
1995-05-11 23:49:56 +00:00
1ba39fdfd1
conditional use of kstack, specifically there is no kstack on the amiga
1995-05-11 23:15:13 +00:00
35785d310e
remove double mapping of kernel stack. created cpu_set_kpc()
1995-05-11 23:04:18 +00:00
b6e35ee17f
fix len bug from Jason Thorpe <thorpej@nas.nasa.gov>
1995-05-11 22:55:12 +00:00
8aa6c376b6
KERNEL -> _KERNEL
1995-05-11 16:52:54 +00:00
64d4944e2f
from Mike Karels:
...
allow Q_SYNC regardless of "target" uid, we allow it with -1;
fix bug that caused all ops to refer to user quotas, not group.
[finally had a chance to check this!]
1995-05-10 18:00:45 +00:00
078a98c864
Fixed compat hpux files.
1995-05-10 17:02:52 +00:00
fb371ccef0
tty_tb.c: need to include ioctl_compat.h in order to compile.
...
sysv_shm.c: make shm_find_segment_by_shmid global so it can be used by
COMPAT_HPUX. There should be a better way...
rest: Add #ifdef COMPAT_HPUX where needed
1995-05-10 16:52:53 +00:00
dbb1f513f8
syscalls.master was changed.
...
Note that COMPAT_OHPUX has been renamed to COMPAT_HPUX_6X and this is a
kernel option now, that should be specified together with COMPAT_HPUX.
1995-05-10 16:47:21 +00:00
dd9ece9090
Made this compile on the i386 (gasp)... Someone will need to test it.
1995-05-10 16:45:25 +00:00
e01c46144d
Minimalist implementation of KIOC[SG]KEY.
1995-05-10 16:04:55 +00:00
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
7b03e25bf5
Print proper machine type at startup. Use 'vfs_shutdown' to sync the
...
disks.
1995-05-10 07:07:30 +00:00
9804349e4d
Ignore HBL/VBL interrupts instead of reporting them as stray as they
...
can't be turned off on a Falcon.
1995-05-10 06:33:31 +00:00
18976dc656
Added machine type detection, the presence of the 2nd MFP determines
...
if the machine is a Falcon or a TT030. The type is added to 'machineid'.
Interrupt initialisation is now dependend on the machine type.
1995-05-10 05:59:27 +00:00
725cb78165
Actually probe for 881 vs. 882. Also add a case for 040, although it's
...
really lip-service at the moment.
1995-05-10 03:19:00 +00:00
d1ba0651cc
Cleanup
1995-05-08 22:21:29 +00:00
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
fae7c89fdd
RCS id/header cleanup.
1995-05-08 19:37:45 +00:00
8e536df8d5
Added sunos_machdep.c; from Matthew Green
1995-05-08 19:14:21 +00:00
9d460c41af
Added sunos_machdep.c [from Matthew Green]
1995-05-08 19:13:48 +00:00
7d8ace7679
Typo
1995-05-08 19:10:53 +00:00
530cf06fbb
Adapt declaration to stand.h; PR #1036
1995-05-08 18:56:06 +00:00
9ca43d7c14
Remove -I/usr/include from `genassym' line.
1995-05-08 18:02:12 +00:00
af7265051f
The previous optimization only works for edge-triggered interrupts...
1995-05-08 18:00:20 +00:00
c9d346c81c
Refuse to map addresses in a MMU hole; the process will get a SEGV.
...
Changed mmu_pagein() interface.
Small nit in mmu_entry.
1995-05-08 17:56:49 +00:00
51082874bf
Use VA_INHOLE().
...
Define arguments to mmu_pagein() in terms of MI VM constants; an idea from Theo.
1995-05-08 17:53:40 +00:00
2a3952abeb
implement cpu_swapout()
1995-05-08 17:50:00 +00:00
f250262185
#define VA_INHOLE() - to test a VA for being in an MMU hole
...
(and PG_VSHIFT should 29).
1995-05-08 17:47:26 +00:00
2d93a58abd
Don't call hardware close in mixer_close(). From Rolf Grossmann <grossman@informatik.tu-muenchen.de>
1995-05-08 17:42:07 +00:00
9ef5f62072
Start swapping.
1995-05-08 17:34:20 +00:00
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
f5675abf16
Set mixer type for rec and play level set. PR#1027
1995-05-08 16:06:38 +00:00
79d6c6505e
fix a few thinkos
1995-05-08 02:52:21 +00:00
6a9186c322
may now work for asdg boards.. offsets obtained months ago but untestable here
1995-05-08 02:40:51 +00:00
3ada5aac65
ignore the kernel compile dirs for which we provide config files.
1995-05-07 22:26:16 +00:00
1c04650195
protect npxproc usage with #if NNPX. From Bob Baron <rvb@cs.cmu.edu>.
1995-05-07 21:07:17 +00:00
7bd5b4bfa8
oops; vm_pageout.c should include machine/cpu.h, _not_ vm_pager.c
1995-05-07 19:27:27 +00:00
e84ef6b4af
rm unused local vars
1995-05-07 16:54:51 +00:00
197ff756b0
Machine dependent core dump struct added.
1995-05-07 16:43:34 +00:00
9bdf9bed5e
Changed core dump style to generic netbsd format.
1995-05-07 16:41:28 +00:00
cf08de5cf0
needs machine/cpu.h
1995-05-07 16:22:40 +00:00
2ca98c3cb6
enable pseudo-dma on ivsc, allow no ite/grfcc.
1995-05-07 15:37:02 +00:00
dbaa7014ef
Turn off a debugging printf().
1995-05-07 03:27:37 +00:00
8a50716192
Fix restore of %fs and %gs in linux_sigcode.
1995-05-07 03:16:16 +00:00
4e9f66f9ca
Improve Linux signal emulation, and emulate the modify_ldt() call.
1995-05-07 02:59:30 +00:00
6e02c4b647
Add a copy of the user code and data descriptors in the GDT.
1995-05-06 20:30:14 +00:00
5c75c8b7ad
Use global definitions of i386_[gs]et_ldt_args.
1995-05-06 19:21:37 +00:00
7a69a9c95b
Define i386_[gs]et_ldt_args here.
1995-05-06 19:19:57 +00:00
56b5c26854
Get rid of a printf() that got left behind in the probe.
1995-05-06 18:44:48 +00:00
c4cb3e244c
Probe this like the other devices.
1995-05-06 18:33:19 +00:00
e97a07b5a4
Add stub for linux_modify_ldt().
1995-05-06 18:17:15 +00:00
2b0696ff3c
Add linux_modify_ldt(), if __i386__.
1995-05-06 18:16:35 +00:00
372dd89e62
Kernel message buffer implemented.
1995-05-06 00:08:28 +00:00
8951a20fe2
Auto-select open mode when opened half-duplex. From John Kohl. PR#1006
1995-05-05 22:36:14 +00:00
524c9c7f2a
Use nvram.h.
1995-05-05 22:28:17 +00:00
8fc6a61adc
Add definitions for NVRAM equipment byte.
1995-05-05 22:08:43 +00:00
8b4abb7503
Fix error in handling FPU types.
1995-05-05 16:39:14 +00:00
231b64341e
Fix bug on handling HD-floppy's.
1995-05-05 16:38:05 +00:00
ec3a1cd9f7
Define dma_drvmode correctly
1995-05-05 16:36:57 +00:00
0d58fa8604
Report "real mem" correctly and make one single module for handling
...
software interrupts.
1995-05-05 16:35:21 +00:00
0dae8a5da7
Remove some unused defines.
1995-05-05 16:33:11 +00:00
60f4c22869
Shift system clocks from TT-mfp to ST-mfp and remove some dead-code.
1995-05-05 16:31:46 +00:00
d64c598f6a
Shift system clocks from TT-mfp to ST-mfp for Falcon.
1995-05-05 16:30:33 +00:00
29a5673f41
BROKEN_SWAP removed, swapping verified OK.
...
pmap_collect(pmap) added as null define.
1995-05-05 14:13:01 +00:00
bd890814cf
Removed cpu_set_init_frame() use.
...
Increased default limits of memory use, ridiculously small before.
1995-05-05 10:53:53 +00:00
f58eb36f82
Removed kernel stack relocation and double-mapping.
...
Speeded up fork() significantly.
1995-05-05 10:47:35 +00:00
214234c937
Fix MAXine interrupt mask routine
1995-05-05 06:48:14 +00:00
331e2bd82b
Add some code/defines to differentiate Asante and Interlan/Gator cards
...
correctly with the new nubus code.
1995-05-05 05:40:13 +00:00
8703076975
define BROKEN_SWAP and/or cpu_swapout as appropriate.
1995-05-05 03:41:51 +00:00
0b2ce5d881
delete some cruft, don't swap if BROKEN_SWAP defined, call cpu_swapout rather than #ifdef
1995-05-05 03:35:39 +00:00
3ff601e7a1
Don't conditionalize utility routines based on DEBUG flag
1995-05-05 02:45:31 +00:00
03c9dc7a48
Fix long-standing bug in NetBSD/pmax interrupt initalization on
...
Turbochannel machines with an IOASIC.
After an interrupt is taken, the IOASIC interrupt enable mask is
and'ed with the kernel's interrupt-mask variable. This masks
off any interrupts that were enabled after the hardware interrupt-enable
mask was set. Due to this bug all iynterrupts must be enabled before
the first interrupt is taken. (Interrupts enabled later aren't on in the
ioasic intr-mask register, so they aren't on in (sirm & kernelmask),
which is what used to get written back to the ioasic interrupt-mask
register. Fixed, and tested on on 3MAX+ but not xine/3min.
If this patch perchance breaks on Xines or 3mins, the old code can be
re-enabled by changing the #if 0 in machdep.c to #if 1.
1995-05-04 19:48:41 +00:00
4c8828e743
init `mode' field in sunaudiogetinfo().
1995-05-04 19:46:31 +00:00
7d244351cf
Add `evcnt' field.
1995-05-04 19:43:27 +00:00
089ab8e266
define audio `evcnt' field.
1995-05-04 19:42:36 +00:00
9e61204b61
Tally interrupts.
1995-05-04 19:41:35 +00:00
2e0e8fc49d
use the machine-independent definitions for the mc146818.
...
wrap the various uses of the chip (including the uses of the NVRAM on it)
around the new defintions, structures, and functions specified in the header.
1995-05-04 19:39:08 +00:00
7153343684
two cases to quiet the compiler. perhaps should be fixed differently.
1995-05-04 19:35:20 +00:00
5d25b2c50e
machine-independent definitions for the Motorola MC146818A Real Time Clock
...
and compatible chips, including the Dallas Semicontuctor DS1287A.
This chip is used in PC's, DECstations, and Alphas, at least...
1995-05-04 19:31:18 +00:00
40b72cc7a2
Wrap NGDT and NLDT in parens.
1995-05-04 05:37:39 +00:00
78356f06b3
Add two vprint()s, to give more informative panic messages.
1995-05-04 03:11:06 +00:00
0175317fc3
If we decide to use IRQ 13, explicitly turn off CR0_NE to be sure.
1995-05-04 00:30:56 +00:00
94f4346537
Update a comment to match that last change.
1995-05-04 00:20:40 +00:00
f0a42753e4
npxinit() should not be called during autoconfig now. Watch for this
...
condition.
1995-05-04 00:16:40 +00:00
e03a827a0a
Move some comments from before npxsave1() to before npxsave().
1995-05-04 00:00:25 +00:00
bfef4c14c5
Slight rearrangement, to make the TS handling easier to follow.
1995-05-03 23:09:37 +00:00
99224602b4
Only dump the FPU state if the process actually used the FPU.
1995-05-03 23:05:46 +00:00
011aa68805
looks like some extra ')'s were left in here.
1995-05-03 21:38:57 +00:00
d23aebf3bb
Fix pccnpollc().
1995-05-03 20:46:32 +00:00
a412d4803c
mtpr support for 11/780 added. DELAY added. mcount() corrected.
...
trapframe fixed to support all registers.
1995-05-03 19:53:40 +00:00
1d2f0bce2a
Make the byte-shifting code consistent.
1995-05-03 19:38:45 +00:00
35d394d7e4
Changed conf.c to new style. Took away double saving of regs in traps.
...
Changed boot() to use vfs_shutdown(). Updated setregs.
1995-05-03 19:20:09 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
6db4e1b58a
By default, don't frob the ICU masks here. The software masking should
...
be sufficient.
1995-05-03 14:31:35 +00:00
c6a24163a3
Use Alpha cdefs.h
1995-05-03 06:04:54 +00:00
f57d609a52
Use PCB_USEDFPU, and a small performance tweak.
1995-05-03 00:17:16 +00:00
66927585fc
make an __indr_references macro, that expands to nothing...
1995-05-03 00:13:55 +00:00
e772f7c5ef
Set PCB_USEDFPU.
1995-05-03 00:09:13 +00:00
029176e96b
Add PCB_USEDFPU.
1995-05-03 00:08:19 +00:00
64b99b333d
The pmax 3100 interrupt-init code is broken: cpu_startup() enables
...
interrupts before it calls configure(). On 3100s, this can result in
the ethernet interface interrupting before leprobe() is ever called.
Be a bit more defensive in leintr(), where it was dereferencing a null
pointer. This reputedly fixes the oft-reported problems of 3100s not
ooting unless they're on an idle net or had a hard reset done before boot.
(Reworking the config code completely would be nice too.)
1995-05-02 20:00:09 +00:00
be2c7f3d13
If we panic inside trap(), Do a stack traceback before printing the trap log.
...
Also change the stack-traceback code to avoid having multiple returns
(and thus multiple stack pops) because with gcc -O2 that breaks the
heuristic that a "jr ra" preceding the PC precedes code to push the
current stack frame. Which breaks stacktrace() before it even
traces past itself :-(. Use a goto instead.
1995-05-02 19:51:52 +00:00
0c8be3a288
Make sure kbdopen() ships the keyboard reset cmd.
1995-05-02 07:56:42 +00:00
176d4dd6e5
Added -T option.
1995-05-02 05:54:28 +00:00
3d9ffd41f3
make this work sanely on a 64-bit machine. Sacrifices a small bit of
...
error checking in the DIAGNOSTIC case. These changes might be backed out,
if it's decided that MINBUCKET should be 5 (rather than 4) on the alpha.
However, doing that has its own set of nasty consequences.
1995-05-01 22:39:11 +00:00
2581c66077
remember first error code (if any) that's different than ENOEXEC.
...
Not perfect, but there's no perfect solution to the "multiple interesting
error codes" problem.
1995-05-01 22:36:45 +00:00
73fead01fc
Fix typos.
1995-05-01 19:45:42 +00:00
1ff4bb49de
Adjust for new defn of md_regs.
1995-05-01 19:33:17 +00:00
bc5a1863db
Declare sigcode and esigcode.
1995-05-01 19:01:45 +00:00
edab8dc1d9
Oops, took out a bit too much
1995-05-01 17:35:45 +00:00
7bada980a5
Oops. Undo some console code checkins that didn't belong.
1995-05-01 17:22:20 +00:00
88f28c3996
Fix typo.
1995-05-01 14:19:14 +00:00
8792c8e284
Save and restore %fs and %gs across signals.
1995-05-01 14:15:07 +00:00
4eea138a48
Add sc_gs and sc_fs. Move sc_onstack and sc_mask to end.
1995-05-01 14:14:11 +00:00
c78dd5a369
New location & definitions for audio driver.
1995-05-01 14:13:45 +00:00
bbfcbb8483
Add VM86 segment registers to trapframe.
1995-05-01 14:13:26 +00:00
cef0c43dee
Stylistic changes, and we don't need KERNEL any more.
1995-05-01 13:16:16 +00:00
c55ef2fd64
Always reload the LDT iff we reallocated its storage.
1995-05-01 13:13:20 +00:00
953e339aa0
Stylistic changes tp cpu_exit().
1995-05-01 13:09:43 +00:00
f745c10020
Eliminate _gsel_tss and _default_ldt.
1995-05-01 13:02:24 +00:00
e5d7ebde66
Update to match include files.
1995-05-01 11:07:40 +00:00
0ea347bf51
Update for changes in segments.h.
1995-05-01 10:43:01 +00:00
bce8e94dd2
Correct comments in gdt_segs[] and ldt_segs[] initializers.
1995-05-01 09:08:27 +00:00
5d17674312
Remove IdlePTD.
1995-05-01 08:53:13 +00:00
87b25c7f5c
Update to match include files. Eliminate _ucodesel, _udatasel, and IdlePTD.
1995-05-01 08:25:30 +00:00
ae11bd216c
Remove historical garbage.
1995-05-01 08:14:25 +00:00
17dd9534bf
Update to match include files. Eliminate _ucodesel, _udatasel, and IdlePTD.
1995-05-01 08:06:22 +00:00
5a7e987371
Make md_regs a pointer to a trapframe.
1995-05-01 07:56:20 +00:00
f32276958e
Use segments.h, and some other cleanup.
1995-05-01 07:55:21 +00:00
33e0286648
Remove PCB_SAVEFPU.
1995-05-01 07:55:04 +00:00
8b51849f9d
Make this includable from locore. Remove unused GDT and LDT slots.
1995-05-01 07:37:43 +00:00
c2e46efab2
Rename ibcs2_sigflags to __spare, but leave the space for now.
1995-05-01 04:53:24 +00:00
7688f4456e
Remove usages of ibcs_sigflags.
1995-05-01 04:50:28 +00:00
92e9818c88
Expose idt[] here.
1995-05-01 04:49:51 +00:00
b8d3de2758
Add pcb_cr0.
1995-05-01 04:49:28 +00:00
17a5f987ba
Be more aggressive about lazy saving and initialization.
1995-05-01 04:47:43 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
f55c4a0a19
Another trivial optimization.
1995-05-01 01:24:04 +00:00
34e5f975f9
Don't set mrg vectors if we're using the serial console--this allows
...
machines w/ non-working desktop bus to actually get on with booting.
1995-04-30 17:01:06 +00:00
58cd4c0a1d
Get 68040 defines in line with other 68k ports so libkvm/kvm_m68k.c compiles
...
cleanly.
1995-04-30 14:02:12 +00:00
f677a89489
Small changes in dma locking code.
1995-04-30 12:06:01 +00:00
12c60f7bc0
Complete rewrite, made necessary because Falcon SCSI needs to share
...
NCR5380 and DMA access with floppy.
1995-04-30 12:04:48 +00:00
e95337c226
Added lock status bits, update function prototypes.
1995-04-30 12:02:03 +00:00
fb4939eddf
Moved softint definitions still in cpu.h into mtpr.h and did some minor
...
cleanups.
1995-04-30 12:00:31 +00:00
8996e3866b
- Move softint definitions to mtpr.h
...
- Add flags for TT/Falcon model for machineid, we definitely need them
1995-04-30 11:56:22 +00:00
4d059559f7
resurrect, and move files.pmax.newconf to new location.
1995-04-30 10:11:00 +00:00
14b1452a90
kill unnecessary blank line at end of file
1995-04-30 07:03:13 +00:00
b835913465
first arg to open() is a 'const char *'. pointed out by David Brownlee
...
in pr 1004.
1995-04-30 03:57:54 +00:00
9b7c37148b
new-config files list. missed this yesterday.
1995-04-30 02:44:44 +00:00
fb9f07db36
Update MIPS stack backtrace code to trace through locore functions,
...
traps, and interrupts The earlier (4.4bsd) code didn't do the first two, and
got the last one wrong. Also print some functions (e.g., trap handlers)
by name. Add hook to use something other than printf() as the output
function, e.g,. for kernel debugging.
Tested with the `native' toolset, but not ELF format kernels.
(i.e., unwinding the $GP register is not tested.)
The stack backtrace code that interprets and unwinds stackframes is still
opaque and stylistically awkward.
1995-04-29 21:10:31 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
7cc5a0ed42
make FLT_ROUNDS call __flt_rounds, so dynamic rounding mode is grabbed.
1995-04-29 05:45:44 +00:00
c075955b09
kill historical cruft
1995-04-29 01:56:59 +00:00
18d9d7e5ef
first cut of the alpha version.
1995-04-29 01:09:17 +00:00
f54398dae4
Add prototype (new-style) config for pmax. This doesn't yet work;
...
auto-configuration initialization code is missing. It uses "needs-count"
flags to come slightly close to what the old-style pmax source expects.
Perhaps autoconfig code can be lifted from the alpha port or volunteers
found to write some.
1995-04-28 23:34:39 +00:00
b2c7420e5a
Fix performance bug in pmax MachFlushDCache(). Old code disabled icache
...
and wasn't unrolled. This code runs cached and unrolled, giving an order
of magnitude improvement in some cases (e.g., DMA-capable network devices).
In use at Stanford DSG since late January 1995.
1995-04-28 23:17:51 +00:00
0cd2332f66
sigcode is svr4_sigcode
1995-04-28 23:11:37 +00:00
026a077a5d
Check in source code actually containing changes in previous log message--
...
fixes to turbochannel-based DECstation interrupt enabling.
(I hate network firewalls that break rsh and remote CVS.)
1995-04-28 22:50:29 +00:00
ac3b1189c1
ns32k specific portions of ieeefp.h (fp_rnd, fp_except, constants, etc.).
1995-04-28 22:01:25 +00:00
7fea99983f
Changed FLT_ROUNDS from constant to a call to __flt_rounds(), so that the
...
current rounding mode is accurately reported.
1995-04-28 21:58:57 +00:00
523e8bccbc
Fix hardware interrupt-mask setup in the 5k/240 (3max)+ interrupt handler.
...
(A similar fix needs to be applied to the 3min and xine handlers.
This fixes a long-standing problem when booting with a card that
wants to interrupt (e.g., a network interface) would have interrupts
enabled before a handler was set up.
Add interrupt-counting code to model-independent interrupt handler,
and 3max (5k/200) and 3max+ (5k/240) md handlers, for vmstat -i.
Similar changes for 3min and xine are obvious but not done.
Add code for 5k/240 to read, and latch, the current value of the
IOASIC bus-cycle counter at each timer interrupt. The latched
counter is needed to accurately interpolate the bus-cycle counter value
as a high-resolution clock.
1995-04-28 21:48:11 +00:00
9dde470095
- Remove cpuspeed
...
- Remove dead code (stmem_steal())
- Use round_page() on st_pool_size before using. This prevents crashes
when it is 'binpatched' with a value that is not a multiple of the
page size.
1995-04-28 11:41:53 +00:00
d3056f9136
CD-ROM drives added.
1995-04-28 11:36:33 +00:00
cd29a7f291
Better way to select a display mode?
1995-04-28 11:34:33 +00:00
d3bb44e8f2
Made no_ttram_dma patchable instead of a define.
1995-04-28 11:33:01 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
07992ead4b
Add memory-mapped address of the IO ASIC TurboChannel bus-cycle counter,
...
as present on 5k/2xx and Alpha IOASICs. Older machines may or may not
have the hardware counter. To be used as a high-resolution DECstation clock.
1995-04-28 04:44:21 +00:00
ef8023a47b
Check in changes suggested by Ralph Campbell: update variable names
...
to use turbochannel slot numbers, add a couple of extra slots, just
in case.
1995-04-28 03:10:41 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
59f33bea48
Add sfb device driver
1995-04-27 20:52:39 +00:00
ecec677e0c
Removed cpuspeed
1995-04-27 20:34:13 +00:00
a9313f09e4
Speed up handling of short and/or misaligned mbufs significantly. No change
...
in the `normal' cases.
1995-04-27 17:18:22 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
1138c9d047
Handle KIOC[GS]LED ioctls; from Lon Willett.
1995-04-27 14:27:11 +00:00
9cc011e7a1
Use new files.sunos and old files.svr4 :-)
1995-04-27 12:16:31 +00:00
843a2a3539
Use new files.sunos
1995-04-27 12:08:54 +00:00
b9771ef7b1
Try to make the reboot system call compile under sun3 with RB_STRING
...
support [not tested]
Add files.sunos
Rename system call switch table file from sunos_init_sysent.c to sunos_sysent.c
like other emulations.
1995-04-27 12:05:37 +00:00
b9c4f23337
needs-count => needs-flag
1995-04-27 07:26:08 +00:00
042a0e2c63
remove warnings in pmap.c
1995-04-27 07:19:09 +00:00
83e651c4c4
scntty & reorg using softc stuff.
1995-04-27 07:18:02 +00:00
a186461a00
conf.c: ptstty ...
...
machdep.c: setregs parameter type change, remove warnings
process_machdep.c, pmap.c : remove warnings
1995-04-27 07:16:31 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
63fcfd3c89
Disable the cache stuff for now. Add more comments.
1995-04-26 23:42:35 +00:00
a72c4b5e5d
SUNOS_SYS_sigreturn -> SUNOS_SYS_sunos_sigreturn
...
Also, add check for trap during panic.
1995-04-26 23:39:04 +00:00
c75b9fd69a
Avoid null reference with unsupported configurations.
1995-04-26 23:30:08 +00:00
8ba352c1a9
Use vfs_shutdown()
1995-04-26 23:25:26 +00:00
cc9cf5119d
pt_tty -> ptytty
1995-04-26 23:24:13 +00:00
db42cb9416
Some corrections for cache control. Still needs work...
1995-04-26 23:23:20 +00:00
ac1a62db29
Add xxtty()
1995-04-26 23:20:15 +00:00
6d7bcdbd2a
Add work-around for LANCE Rev. C bug.
...
Needs to be fixed for multicasts...
1995-04-26 23:19:16 +00:00
f4d7b9097d
Make sunos_reboot(RB_STRING,"...") work for sun3.
...
Could be made to work for sparc too.
1995-04-26 23:12:02 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
d4f78febcf
define LED controls
1995-04-26 14:24:54 +00:00
a1175c74a0
Fast checksummer from Matthew Green.
1995-04-26 13:30:03 +00:00
7dbfb9ead9
Macroize a few more things; suggested by Matt Green. Cast pointers to long,
...
not int. No functional differences.
1995-04-26 09:40:36 +00:00
4c3aafc732
Fix typo in previous changes.
1995-04-26 00:00:23 +00:00
7a2ec6be4b
Make this compile again...
1995-04-25 21:57:10 +00:00
43da4827ae
sigcode and esigcode aren't defined for ultrix emulation
1995-04-25 21:51:15 +00:00
2ca157b084
Make this compile again; from Ted Lemon
1995-04-25 21:10:01 +00:00
eb8a2e27a0
New audio driver.
1995-04-25 20:08:13 +00:00
794f74a0cf
Audio driver name change.
1995-04-25 20:07:10 +00:00
8d90aefeb0
New audio driver from Rolf Grossmann.
1995-04-25 20:05:32 +00:00
e9177420ca
NetBSD RCSid
1995-04-25 20:01:23 +00:00
6d68e2f26f
Remove duplication of code from subr_autoconf.c
1995-04-25 19:59:49 +00:00
1992309f8b
Fix a few compat code casualties
1995-04-25 19:16:43 +00:00
7c7142b1cf
status report
1995-04-25 18:59:14 +00:00
4061570286
Add 'users to-do list'
1995-04-25 18:16:15 +00:00
700118da76
Stop-gap measure to prevent panic when select()ing on /dev/console.
1995-04-25 17:52:43 +00:00
64f2d35a0f
Do not report each pseudo-DMA overrun as a (soft) error.
...
Add a small heuristic to converge on an acceptable threshold value.
1995-04-25 14:44:44 +00:00
589f248bad
Cleanup and fixes for uVAX boot.
1995-04-25 14:14:19 +00:00
3eca8117f7
Fix up args to scdebug_{call,ret}
1995-04-25 05:30:14 +00:00
d73db495da
Fixed RPC code to deal with RPC messages larger than one mbuf.
1995-04-24 21:54:56 +00:00
e49b0de53f
short -> int (alignment)
1995-04-24 21:34:04 +00:00
6404739df8
AMD9730 telephony chip (used to be sparc/dev/bsd_audioreg.h).
1995-04-24 19:17:17 +00:00
30f71c550f
A couple of fixes frm Rolf Grossmann.
1995-04-24 19:13:52 +00:00
fab3d7b117
kill a bogus NOTREACHED, fix spacing
1995-04-24 06:24:19 +00:00
df9af2897a
bring up-to-date with recent conf.c and sunos changes.
1995-04-23 18:24:21 +00:00
10eb24c459
add needed signal debug stuff so it will compile with DEBUG
1995-04-23 18:22:14 +00:00
35bb9b1ffd
new grfcl driver submitted by Ezra Story <ezy@panix.com>
1995-04-23 16:20:43 +00:00
c937b8a519
Fix compiler error in sunos_reboot().
1995-04-23 01:00:46 +00:00
a2bc99d6f1
Make these compile again.
1995-04-23 00:37:23 +00:00
11632db942
Make this actually compile...
1995-04-23 00:27:48 +00:00
leo