Commit Graph

469 Commits

Author SHA1 Message Date
cgd e3c75e1ca8 Clean up slightly, abstract pci_conf_print family's base address register
printing into a function, add a bit more pretty-printing of existing stuff.
Implement pretty-printers for type 1 and type 2 headers.  (Right now,
these are just quick stabs based on some on-line bridge docs that I have
handy on my laptop.  Mmmm, meetings.  I'll check the bits when I get
back within reach of my official docs.)
1998-05-28 02:26:00 +00:00
augustss a10981bdbf Fix a recording problem that occurs when the EAP chip sends its
interrupt just BEFORE the dma has finished rather than after.
1998-05-26 13:28:03 +00:00
mark 6548f40f95 Regen from pcidevs. 1998-05-25 22:32:24 +00:00
mark 910456eccf Added TriTech Microelectronics vendor ID.
Added TriTech Pyramid3D 25202 product ID.
Added Promise Ultra33 UltraDMA IDE controller product ID.
Added ALI product ID's for M1543 'Southbridge' PCI devices.
1998-05-25 22:31:11 +00:00
mark 56c82ddeda Don't make the inclusion of machine/intr.h alpha specific as other ports
require this as well.
1998-05-25 22:20:24 +00:00
mark 45dd8e3edd Define TULIP_COPY_RXDATA for arm32 as well as alpha. 1998-05-25 22:13:28 +00:00
mark 69a9a5c445 Include arm32/pci/pci_machdep.h if arm32 is defined. 1998-05-25 22:11:37 +00:00
matt 18319c0048 Changes so that these compile on NetBSD/alpha as well as NetBSD/i386. 1998-05-23 18:32:29 +00:00
matt 9eb77bf49a Change 21040 modes slightly. Prevent infinite autosense loop of 21143 that
is not connected.  Make TULIP_STS_LINFAIL only valid for chips with that
status bit defined.
1998-05-22 18:50:59 +00:00
matt cfbb5f3f21 Add bus_dma(9) support for the DEFxA FDDI driver 1998-05-21 20:44:02 +00:00
cgd 9991233636 add an #if 0'd chunk which will pci_conf_print() every device (spews
lots of data, e.g. ~18k on a PCI system with few add-in devices; use
with MSGBUFSIZE=...).  Useful to have here so that people who want as
much data about the PCI configuration in a machine can get it without
having to craft their own code.  Also, clean up a few of the other
#if 0'd printfs.
1998-05-18 17:28:07 +00:00
cgd 4b0876c74b largely reimplement pci_conf_print():
* print all configuration space registers.  Then, where possible,
  interpret them.  (That is, PRESENT ALL THE DATA, then interpret it --
  don't hide data behind interpretation.  Also, when interpreting
  fields, try to print out the specific value that's being interpreted.)
* handle different header types.
* allow caller to specify a function which can interpret the
  device-dependent header and is responsible for pretty-printing it.

It spews (use 'options MSGBUFSIZE=...' 8-), but when you want the data,
you really want _all_ of it.

Still needs some cleanup and additional code (e.g. interepretation
of PCI-PCI (type 1) and PCI-Cardbus (type 2(?)) bridge headers).
1998-05-18 17:25:17 +00:00
cgd 27b21a3a47 add a PCI_HDRTYPE_TYPE() macro, to get the 'type' portion of the
headertype register (i.e., not including the 'multifunction' bit).
1998-05-18 17:17:04 +00:00
cgd 2102dd3e20 check that memory access is enabled before bothering to do the
pci_mapreg_info() call.  pci_mapreg_map() implies this check,
but code which calls pci_mapreg_info() has to check it explicitly.
Otherwise, if memory space is disabled, the driver does the wrong
thing, and tries to use memory space anyway, potentially resulting
incorrect driver operation and no useful error message.
1998-05-18 17:14:32 +00:00
kml 051be14326 Correct copyright date. 1998-05-17 16:46:06 +00:00
tsubai 02aa1f7050 Add macppc support. 1998-05-15 12:35:06 +00:00
augustss 07e69a32d2 Regen. 1998-05-14 21:46:53 +00:00
augustss c3def5e349 Add another USB controller. 1998-05-14 21:45:18 +00:00
drochner 95bdb660ed Simple screen attribute handling for wscons.
The graphics device driver passes a "default attribute" for normal text
output to the wscons framework. If the emulation module needs more
attributes (for different "renditions") it can allocate them via a
callback.
For now, only the "sun" emulation makes use of it.
1998-05-14 20:49:55 +00:00
kml e72782a137 Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network)
card.  With some modification, this could probably also work for their
Gigabit Ethernet card based on the same chipset...
1998-05-14 00:04:57 +00:00
augustss 6c0386cefa Regen. 1998-05-13 15:51:36 +00:00
augustss 364c6cf250 Add OPTi OHCI USB host controller. 1998-05-13 15:50:58 +00:00
augustss d824266389 Remove some lint. 1998-05-06 19:21:45 +00:00
mjacob ed8ddb6948 more info (in heavy debugging cases) to print 1998-05-05 22:14:23 +00:00
thorpej af65e69596 Add 5 more NE-2000 compatible PCI Ethernet interfaces. XXX Note that some
of these may need revision in pcidevs.
1998-05-05 17:23:08 +00:00
thorpej e28a3f28ac Regen. 1998-05-05 17:22:20 +00:00
thorpej 7b2b6d3835 Add a few more NE-2000 compatible PCI Ethernet interfaces. XXX Some of
these may need further revision to get vendor and product names exactly
right.
1998-05-05 17:22:04 +00:00
thorpej 4626eef504 Slighly less brutal hack to deal with broken memory-mapped access of
the ThunderLAN on the TI TravelMate 5000 docking station: single it out,
and allow memory-mapped access on the Compaq products.
1998-05-05 07:17:12 +00:00
thorpej 19b7ffb19f Regen. 1998-05-04 05:51:35 +00:00
thorpej 0813824005 Add STB Systems' second PCI vendor ID, and their Velocity128 AGP product.
kern/5362, Paul Goyette <paul@whooppee.com>
1998-05-04 05:51:19 +00:00
thorpej 5153af345d In pci_conf_print(), don't print a mapping register if the size is 0. 1998-05-03 19:46:15 +00:00
thorpej 93db65c28c Properly compute the region sizes in pci_conf_print(). Bug pointed out
by Chris Demetriou.
1998-05-03 19:41:33 +00:00
mycroft a835c012d3 Adjust PCLKDIV by 2 to correct the output sample rate. (Unfortunately, this
isn't documented.)
Fix typo in mappage routine.
1998-05-02 08:21:10 +00:00
mycroft fef6b0b8a3 Oops; fix typo. 1998-05-02 02:36:30 +00:00
mycroft cfe3e5fb08 Fix reading of the master volume, and a hack that seems to make stereo output
work correctly.  (Will check the documentation as soon as I can read it.)
1998-05-02 02:34:53 +00:00
augustss 6cb1f6c5b1 Add a driver for the Ensoniq AudioPCI sound card. The driver still
needs some testing, but it seems to produce sound.  The driver was written
by me, but since I don't have the hardware the debugging and testing was
done by Andreas Gustafsson <gson@araneus.fi>, Chuck Cranor
<chuck@maria.wustl.edu>, and Phil Nelson <phil@cs.wwu.edu>.  Thanks.
1998-05-01 21:54:33 +00:00
mycroft aa7159be03 Regen. 1998-04-30 06:18:45 +00:00
mycroft 6e626dfafc Add the Apple Bandit chip. 1998-04-30 06:18:11 +00:00
thorpej 9a25b32914 Use the symbolic name VVR_BLANK rather than a magic constant. 1998-04-29 02:23:20 +00:00
thorpej 6493eddd91 Define the contents of the Video Valid register on the TGA and TGA2. 1998-04-29 02:11:19 +00:00
drochner 5f6ca9ef93 Avoid "unused variable" warning without PCIVERBOSE.
From mynhier@cs.utk.edu (PR kern/5328).
1998-04-20 14:16:26 +00:00
drochner 928943b2ff Keep all relevant state information in a "pci_softc" so that it is
accessible at runtime (for LKMs in particular).
Remove BROKEN_INDIRECT_CONFIG.
1998-04-17 18:40:31 +00:00
drochner d860c80512 regen 1998-04-16 19:48:14 +00:00
drochner bfd53bac43 add 2 ATM chips, correct entry for Toshiba MIPS bridge 1998-04-16 19:46:03 +00:00
drochner 3cc1fe831c count allocated screens correctly 1998-04-16 12:52:42 +00:00
drochner aadda67e18 add mi PCI VGA and TGA 1998-04-15 20:17:17 +00:00
drochner eda73f204f The "mi" TGA driver. It's still not of much use on anything but alpha
because it depends on initialization by the firmware.
Further, an mi mmap() is needed...
1998-04-15 20:16:30 +00:00
thorpej a95c0ac15a Add pci_conf_print(), a function to dump the PCI configuration space, useful
in driver debugging.  From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>,
PR #4249.
1998-04-14 21:24:50 +00:00
thorpej ce28bee247 Add UDF and 66MHz capable bit definitions for the PCI status register.
From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>, PR #4249.
1998-04-14 21:22:44 +00:00
thorpej db453b872d Add support for the VIA Technologies VT86C926, from Kazuki Sakamoto,
PR #5256.
1998-04-10 01:28:59 +00:00