8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
9cfc74c312
Report write-protected disks.
2000-01-24 16:52:02 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
18ad190b10
* b_cylin -> b_cylinder; deals with PR9283.
...
* a few optimizations & misc. style updates.
2000-01-23 22:19:12 +00:00
7b49d242ce
Clean up the machine symlink stuff ever so slightly. Needs to be
...
standardized between files.
2000-01-23 17:04:03 +00:00
d76bf6c906
Try both the BOOTPARAMS and BOOTP protocol (in that order). This also
...
takes care of PR#8738.
2000-01-22 12:34:57 +00:00
52242fdf9f
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:28:59 +00:00
df99dfd934
Simplify toggling the FTP bit on sun4m machines.
2000-01-21 13:25:12 +00:00
252d47729f
Update FDC offsets used by fdintr.s
2000-01-21 13:24:06 +00:00
6b2ebb44a7
Move several PIL_* definitions into the scope of LOCORE stuff.
2000-01-21 13:22:55 +00:00
f8ac5484fa
Medium sized code overhaul:
...
* Improve communication between the `hard' and `soft' interrupt handlers
to better distinguish various interrupt sources.
* Eliminate several race conditions where we would set a time out handler
only after starting the command on the hardware.
* Handle most timeouts by resetting the controller; there isn't much chance
of recovery in any other way. Currently, the exception is a timeout
on I/O, in which case we first try to pulse the controller's TC line
in order to abort the pseudo-dma sequence. Apparently, "normal"
conditions can induce such a timeout when there's no disk in the drive.
* Reduce the formatting gap parameter to 0x54.
* On the obio bus, interpret the `status' attribute.
* Minimize console diagnostic output if the errors we get appear to be
caused by the absence of a disk.
2000-01-21 13:22:01 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
644b514c39
Change STRIPFLAGS=-g for cross-toolchains.
2000-01-19 14:44:58 +00:00
4f27a98702
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:48:02 +00:00
725c6438c1
Use bus_space(9) functions to access the controller registers.
...
Add probes to the attach routines before poking the chip to see
where the registers are located.
2000-01-17 16:57:15 +00:00
2d7f7ef7a6
Use bus handle to in `struct fdio' to read the chip registers.
2000-01-17 16:53:18 +00:00
611f7a9938
Add offset to bus handle in `struct fdio'.
2000-01-17 16:52:04 +00:00
c31e760978
Add missing `break'.
2000-01-14 15:25:28 +00:00
3cb5a866dd
Expand md filesystem to 3.6MB.
2000-01-14 13:41:45 +00:00
e42b2c6cb7
When matching scsi disks, check for the scsibus parent in the previous
...
entry in the boot path. Noted by Matthew Jacob.
2000-01-12 15:53:29 +00:00
e7f230b6d2
no need to guess about tgt/lun bounds- we know what they are
2000-01-12 14:53:17 +00:00
7935de2d85
Use a table to detect device aliases and add various `isp' and floppy
...
controllers to it. Also use a table lookup when matching busses/controllers.
2000-01-11 20:53:24 +00:00
c6b6f3883a
Remove old-style boot device recognition.
2000-01-11 12:59:43 +00:00
a744e28304
Cleanup the list of exported headers a bit.
2000-01-10 22:09:34 +00:00
20018b9be8
Add special code for recognising a floppy drive as the boot device.
...
Sun's PROMs don't co-operate here, so there are _hacks_ involved...
2000-01-09 20:53:30 +00:00
a77d141b28
Deal with `24 bit' devices which can still be plugged into an Sbus slot.
2000-01-07 10:54:11 +00:00
8cbc7288d0
* Expand IOMMU DVMA space to top of address space.
...
* Remove confusing comments.
2000-01-04 15:08:30 +00:00
693059feda
const -> __const and include <sys/cdefs.h> earlier; fixes PR lib/9052
...
by Takahiro Kambe.
2000-01-04 14:20:05 +00:00
4681e48204
Remove private kernel members from `struct fpreg'; update accompanying comment.
1999-12-30 23:59:29 +00:00
f152d57aa2
Make sure to reset the FP queue when loading new values into FP registers.
1999-12-29 15:21:27 +00:00
11e6c54cfc
C99: Define a NAN macro in <math.h> which evaulates to a constant expression of
...
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
1999-12-23 10:15:05 +00:00
016b030623
Added tctrl.h
1999-12-20 09:49:20 +00:00
e89216c73c
avoid uninterruptable sleep on a CMD_REQ ioctl.
1999-12-17 00:32:25 +00:00
18ab712015
Provide cpu_boot_secondary_cpus().
1999-12-16 20:24:58 +00:00
f02b80418b
add <machine/tctrl.h> where needed.
...
Add some undocumented commands to the ts102 registers file, and fix a few
typos.
Modifications to tctrl.c:
Add entrypoints to driver for open/close/ioctl/poll.
Make device work with apmd. (still no support for suspend/sleep)
Make device work with ENVSYS API.
Slightly restructure handling of events.
Add function to make microcontroller requests.
1999-12-15 08:12:30 +00:00
dd9ad672a9
add entrypoint for tctrl device, and add <machine/tctrl.h> to includes for
...
machdep.c
1999-12-15 08:03:43 +00:00
5e200de9b7
Add new spl level for tadpole devices splts102.
...
Device entrypoints for tctrl device (tadpole micro controller)
add header for direct-access ioctl to the tadpole microcontroller.
1999-12-15 08:01:00 +00:00
26e1b45757
clrnd()/clbase() discarding.
1999-12-05 11:56:30 +00:00
0513268399
CL* discarding.
1999-12-04 21:13:19 +00:00
b27ecf75a9
oops; remove part of the previous that was not intended (yet).
1999-11-30 07:56:28 +00:00
a24fb44ddf
Pull header files from `syssrc' since we use libsa/loadfile().
1999-11-29 14:49:12 +00:00
2c11d38827
add some missing #ifdef SUN4M to the MP-handling code.
1999-11-27 14:54:53 +00:00
9a6c8313f7
minor cosmetic merges; long way to go here.
1999-11-27 12:14:26 +00:00
264af07cff
merge sparc64 types.h; these files are now identical.
1999-11-27 11:33:39 +00:00
d7e14b468a
more sparc64 merging; these files are (basically) identical.
1999-11-27 11:20:41 +00:00
faa527dcc9
merge sparc64 limits.h; these files are now identical. this includes
...
a `fix' for when s?size_t was changed from int to long but the
definitions of S?SIZE_MAX were left as U?INT_MAX. these are now
U?LONG_MAX.
1999-11-27 11:14:40 +00:00
492e85822e
MNN has been standard for a Long Time.
1999-11-27 10:22:19 +00:00
484cb25f55
s/long/int/ to make this identical the sparc64 version.
1999-11-27 10:10:02 +00:00
e0118ca933
Suppress the `machine' symlink when making target `obj'.
...
Also add it to the clean target list.
1999-11-25 13:27:30 +00:00
633fd1e1cc
Check presence of Sbus interrupt properties before using them.
1999-11-21 15:23:01 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
7fa6c707d3
update a prototype for the new pmap_enter().
1999-11-17 06:16:49 +00:00
8bec119fcc
Add commented out option SOFTDEP to all GENERIC kernels.
1999-11-15 19:10:44 +00:00
d116707af0
Add
...
prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix
to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".
1999-11-15 19:00:25 +00:00
4ab7f024dc
Fix a couple of pmap_enter() calls I missed.
1999-11-15 00:06:58 +00:00
2cfc62b5ae
Update for pmap API change.
1999-11-14 02:39:09 +00:00
3ca3e51df8
Nuke TCP_COMPAT_42. Use sysctl to enable it if required.
1999-11-13 20:56:14 +00:00
a9cdefb6e6
Remove implementation of the `-h' and `-a' options.
1999-11-13 12:09:41 +00:00
1946167939
Update for pmap_enter() API change. No functional difference.
1999-11-13 00:30:26 +00:00
c52f431558
Bring high-resolution time interfaces closer to SVR4:
...
* Change gethrtime() to use mono_time.
* gethrvtime() is defined to return the lwp/process's virtual time;
use p_rtime augmented with the current runtime.
Reviewed by: christos
1999-11-12 20:45:44 +00:00
d2434ef890
remove reference to auxiotwo
1999-11-12 06:15:38 +00:00
73ae3282ab
turns we need to tweak the auxio1 reg to enable the modem. also fix a call
...
to sbus_bus_map. it's closer to working but I wonder if COM_FREQ is the
right value.
1999-11-12 05:20:03 +00:00
8ffb2596c7
make this compile under current
1999-11-12 04:42:19 +00:00
3744fe193f
add some stuff needed for pcmcia support
1999-11-12 04:41:46 +00:00
1138f7e762
add COMPAT_14
1999-11-11 15:55:53 +00:00
8f05f33e49
Move the boot block load address from 3MB to 7MB. The INSTALL kernel is
...
already too large, and GENERIC won't be far behind.
1999-11-09 18:39:41 +00:00
560567d851
Include <sys/exec.h> instead of <a.out.h>/
1999-11-08 23:29:56 +00:00
a96dbfa190
Remove inclusion of unused headers.
1999-11-08 23:29:05 +00:00
1ad621b38f
Handle empty `input/output path' when looking for console device; patch
...
from Brian D. Chase.
1999-11-07 16:36:16 +00:00
4c0911c827
Make this more current.
1999-11-07 01:09:12 +00:00
07e5d68b51
several fixes to copy{in,out,}str() from charles and myself:
...
don't panic if maxlen == 0, just return ENAMETOLONG.
treat maxlen as unsigned like the manpage indicates.
avoid crashing if the userspace address is >= KERNBASE.
make sure *done is 0 when no bytes are copied.
1999-11-05 04:49:26 +00:00
522cbf0248
Update to match new SVR4-style definition names in <sys/exec_elf.h>.
1999-10-25 13:55:06 +00:00
fbfe8a4407
Comply with recent MI scsi changes.
1999-10-21 13:46:06 +00:00
54eed2bc37
Add in the Coda file system and pseudo device.
1999-10-14 16:09:31 +00:00
15ef719178
Add a psuedo-device for coda.
1999-10-14 00:08:45 +00:00
7f589dba84
rename the MD Debugger() to cpu_Debugger()
...
add MI Debugger() which switches to console if wscons is used prior
to calling cpu_Debugger()
1999-10-12 17:08:56 +00:00
8800f180c3
Call find_cpus() much earlier so we can use the result while bootstrapping
...
all that pmap stuff.
1999-10-04 19:27:04 +00:00
de22be977a
Since a context table is now pointing at the correct per-CPU region table
...
at all times, we can dispense with the hackery that patches the magic entry
at context-switch time.
1999-10-04 19:23:49 +00:00
b19b1fc269
Each process (i.e. each `pmap') needs a region table for each CPU.
...
Implement this by making the fields `pm_reg_ptp' and `pm_reg_ptp_pa'
pointers to an array of `ncpu' region table pointers and corresponding
physical addresses.
This is a somewhat unfortunate side effect of having the per-CPU data
addressable by the same virtual address on each CPU.
1999-10-04 19:18:33 +00:00
fa65ea182c
Implement sysctl `machdep.booted_kernel'.
1999-10-04 19:11:42 +00:00
1972c67981
Document what qec, be and qe is.
...
Thanks to Jason Thorpe for explaining!
1999-10-04 19:02:55 +00:00
2b02403498
The old dk_establish() hack doens't work anymore, and should be
...
garbage-collected. device_register() is the One True Way.
1999-09-30 23:01:53 +00:00
11cae42531
Centralize the declaration and clearing of `cold'.
1999-09-17 19:59:35 +00:00
3b01d1b872
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-15 18:10:33 +00:00
f3a668ed84
eliminate the PMAP_NEW option by making it required for all ports.
...
ports which previously had no support for PMAP_NEW now implement
the pmap_k* interfaces as wrappers around the non-k versions.
1999-09-12 01:16:55 +00:00
132d930986
Fix printf format (see PR#8358).
1999-09-10 08:42:58 +00:00
8602e6124d
add svr4_lwp.h to let this build again.
1999-09-08 04:02:48 +00:00
5c57af78d2
Remove now unused variable `i'.
1999-08-27 10:49:20 +00:00
84670a44ef
Initialize the default colormap to 0 == black, all others == full white.
1999-08-26 22:53:41 +00:00
58858e0968
Suns use black-on-white as the default rcons colors.
1999-08-26 20:50:08 +00:00
2c13aef146
- Update to match new rasops_init semantics
...
- Set RI_FULLCLEAR so that we clear the *entire* display
- Set RI_CURSOR and cursor position so that old cursor glyph gets wiped
Fixes PR: port-sparc/8121
1999-08-24 11:12:08 +00:00
2cf3330a1b
Garbage-collect reference to <sys/dmap.h>.
1999-08-23 22:29:37 +00:00
2e95b13365
Use ${SIZE}, ${OBJCOPY} rather than size and objcopy.
1999-08-21 14:18:36 +00:00
3c185af5fd
Include <sys/endian.h> after defining whether where are little- or
...
big-endian. i386, pc532 and vax still include <machine/byte_swap.h>
and define macros for the {n,h}to{h,n}*() functions. mips also
defines some endian-independent assembly-code aliases for unaligned
memory accesses.
1999-08-21 05:53:50 +00:00
06a92524c2
Include <sys/bswap.h> for function prototypes. i386, pc532 and vax
...
still include <machine/byte_swap.h> and define macros for some of
the bswap*() functions.
1999-08-21 05:39:51 +00:00
8974edc06c
The 8bpp PROM console uses index 0 as black, 255 as white. Update ri_devcmap
...
to cater. Partially addresses PR port-sparc/8121.
1999-08-13 09:59:47 +00:00
74ed5b7f0f
Add <machine/apmvar.h> for sparc so that apmd can be built. Eventually
...
this allow it work on Tadpole SPARCbook 3 laptops (and/or other sparc
with power management).
1999-08-11 02:00:09 +00:00
4efe97d08f
remove some more devices that are not the tadpole.
...
add the tctrl device (which controls the tadpole microcontroller).
1999-08-11 01:46:25 +00:00
ec55b51b3a
do a little colormap manipulation. use the tft power hooks in tctrl
1999-08-11 01:41:06 +00:00
385ed7074b
This now works properly and uses interrupts. If you close the lid, the
...
screen will turn off and when you open the lid screen turns on. If you
do too rapidly, the driver won't be notified but you can press the micro
switch and it will come back. Also "halt -p" now works so you don't
have to do Pause-P to powerdown.
1999-08-11 00:46:06 +00:00
28fb7c1eb8
Define cpu_number() as discussed on tech-smp.
1999-08-10 21:08:05 +00:00
4f5d78ae59
s/(sbus | obio)/sbus for the sbus attachments. These were vestiges from
...
the old code.
1999-08-10 12:50:35 +00:00
be4c7c3513
split bwtwo driver in obio and sbus parts
1999-08-10 05:04:08 +00:00
072b17778f
split bwtwo driver in sbus and obio parts.
1999-08-10 04:56:30 +00:00
ede200e1ab
Add a driver for the Tadpole SPARCbook microcontroller. It doesn't
...
do much yet (except for power down support). As sson as I figure
out to get its interrupts enabled, it will be much more functional.
(e.g., print console messages on low power warnings, be able to turn
off the TFT, etc.).
1999-08-09 18:39:58 +00:00
84e306ed83
Tadpoles don't use the standard sun4m power down hardware. So add
...
support for doing it the Tadpole way.
1999-08-09 18:35:58 +00:00
1b0bd3757f
add entries for the tadpole microcontroller (tctrl) and the
...
tadpole pcmcia controller (tpcic). Drivers for the former will
show up today, and the latter later this week or next weekend.
1999-08-09 18:34:43 +00:00
26297cb6e9
PR/8178:Julian Coleman: sparc kernel will not build with cgtwo/cgsix but
...
without sbus. Remove call to cgsix-sbus-attach (impossible code). Make
routines static (they were declared static, but not defined static and
some compilers can complain).
1999-08-09 12:16:10 +00:00
1c0e017cff
Change spl calls to always raise priority, except for the ones which are
...
specifically supposed to lower it.
1999-08-05 21:16:55 +00:00
eb20bbc780
Change the semantics of splsoftclock() to be like other spl*() functions,
...
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
1999-08-05 18:08:08 +00:00
42c15639e0
Remove the false positive on the probe of the built-in modem
...
on tadpoles by calling comprobe1 to see if the modem is really
there.
1999-08-03 00:32:33 +00:00
864afe0bc7
Add video blanking support. It does not power-down the TFT
...
since that requires talking to the H8 microcontroller and
that support is not yet done.
1999-08-02 20:36:57 +00:00
016599a30b
Colormaps now work. Besides a small fencepost error, the real problem
...
is that the Tadpole 3GX tech-ref-man was WRONG. The RAMDAC registers
at at 4 byte offsets, not 8. Once that was discovered, all the code
just worked.
1999-08-02 18:00:21 +00:00
d8f4dbb171
fix a few mmap bugs. pretend to be a cg3 and implement a hack
...
to fack the Xsun server to believe that the p9100's framebuffer
is really a cg3's. So if only colormaps worked, X would be able
to run.
1999-08-01 06:27:00 +00:00
4b814be9cf
Initial stab at a P9100 console FB driver for the Tadpole 3GX.
...
It supports RASTERCONSOLE only and the colormap support is
broken (the hardware doesn't seem to be doing what the tech.
docs. say it should be doing). But it is usable as a console
(but with blue on white as the only color choice). I figured
I'd check it in since it is somewhat usable and someone else
might figure what I screwed up in the color map support.
1999-08-01 00:23:48 +00:00
d4b9056054
Add preliminary support for the built-in modem on Tadpole 3GX/S
...
laptops. There is currently something wrong with the interrupt
code but it does attach and sense a 16550a. (anyways the built
in modem is only a 14.4Kb and you'd really want to use a PCMCIA
modem to get faster dialup rates).
1999-07-30 23:58:25 +00:00
8c0f3c5a5f
Add config file specificially for Tadpole 3GX/3GS laptops.
...
It save ~800KB over the standard GENERIC config file.
1999-07-30 23:55:43 +00:00
d7bf3732b0
The new rasops stuff is a LOT faster; turn on rasterconsole on the cgsix.
1999-07-30 18:11:38 +00:00
a7cd454b1d
It's time to be COMPAT_14.
1999-07-29 10:37:12 +00:00
b513c9a6ad
update comments for mi VME
1999-07-28 09:48:36 +00:00
6922e1976e
adapt to mi VME attachment (sorry for being late)
1999-07-28 09:45:08 +00:00
f6fddabf3f
back out previous - there is really a "vmebus" attribute
1999-07-28 09:39:48 +00:00
223cc34183
make the vme stuff compile again; I am not sure this is correct as I don't
...
have the hardware to test, but it has been broken for 3+ weeks now. Hi
Mr. Drochner!
1999-07-28 05:45:50 +00:00
6ec1ededf1
Make a slight rearrangement in how <machine/lock.h> is included.
1999-07-27 23:45:13 +00:00
cc668e410f
Define apporpriate an value for SIMPLELOCK_LOCKED, based on the
...
semantics of ldstub.
1999-07-27 22:22:33 +00:00
c1ee8f0a8c
Prepend `cpu_' to the machine-dependent atomic locking primitivies.
1999-07-27 21:45:39 +00:00
f886376518
be more efficient when doing the SYSTEM_LD_TAIL for -g kernels: don't
...
copy them just to strip them, use strip -o.
1999-07-26 05:20:44 +00:00
41cc9a0eb8
enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
...
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!
1999-07-20 07:40:34 +00:00
0c2a15c04a
we don't need no-fpu; anyway this has been renamed in new version of egcs
1999-07-10 22:18:34 +00:00
0945bf58b0
Add examples for including the kernel crypto bits from either crypto-us
...
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.
1999-07-09 18:55:33 +00:00
ecdad0ec33
clean up a bit after jason :)
...
- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.
this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)
1999-07-09 09:52:55 +00:00
3ebbe095e0
Change the pmap_extract() interface to:
...
boolean_t pmap_extract(pmap_t, vaddr_t, paddr_t *);
This makes it possible for the pmap to map physical address 0.
1999-07-08 18:05:21 +00:00
eb770c7b7c
add "trace/t <pid>".
1999-07-04 06:45:26 +00:00
5effafcaa6
kernel configuration for IPv6/IPsec. should be in GENERIC in the future.
...
(source code will be committed soon)
1999-07-01 07:00:12 +00:00
33104934d9
update for new VME framework
1999-06-30 15:18:58 +00:00
3c6560a597
More ugly code to force early configuration of the sun4 on-board timer.
1999-06-28 22:40:15 +00:00
61f60a2fbe
Allow SFILES to be empty; from Julian Coleman.
1999-06-28 21:03:23 +00:00
bd0ac6506c
Prepare entry for `hme at sbus'; commented out until driver is finished.
1999-06-28 20:26:47 +00:00
4fe4dae943
Ignore (but still generate a console warning) unhandled user-generated traps.
1999-06-28 15:51:26 +00:00
7c5f595062
mmu_pagein() prototype: change address argument to `vaddr_t'.
1999-06-28 14:44:57 +00:00
5814a13657
mmu_pagein: refuse kernel space addresses here.
1999-06-28 14:41:43 +00:00
427639cdce
- Call ip6intr if INET6 is defined.
...
- remove "need-flag" for mac68k esp driver, as it is not used in anywhere
and conflicts with IPsec ESP header.
This should be the only MD change in IPv6 support, except kernel config file.
Very sorry if you have any compilation problem with it (I believe it is okay).
If your favorite arch is not included in here, please add a
call to ip6intr() from softintr handle.
1999-06-28 08:20:40 +00:00
7683f14172
enable xbox and ppp
1999-06-26 18:47:15 +00:00
c118a70deb
When overriding cache flush functions for specific cpu models, make
...
sure to update the correct function pointers in `cpuinfo'.
1999-06-24 20:22:12 +00:00
ccd6d1e4de
Pull in `sparc/compat_13_machdep.c' for SunOS compatibility too.
1999-06-20 16:30:22 +00:00
0288ffb53a
pmap_change_wiring() -> pmap_unwire().
1999-06-17 19:23:20 +00:00
drochner