make the vme stuff compile again; I am not sure this is correct as I don't

have the hardware to test, but it has been broken for 3+ weeks now. Hi
Mr. Drochner!
This commit is contained in:
christos 1999-07-28 05:45:50 +00:00
parent eced87ad87
commit 223cc34183
2 changed files with 18 additions and 18 deletions

View File

@ -1,4 +1,4 @@
# $NetBSD: GENERIC,v 1.86 1999/07/20 07:40:36 christos Exp $
# $NetBSD: GENERIC,v 1.87 1999/07/28 05:45:50 christos Exp $
include "arch/sparc/conf/std.sparc"
@ -177,10 +177,10 @@ cpu0 at mainbus0
sbus0 at mainbus0 # sun4c
obio0 at mainbus0 # sun4 and sun4m
vme0 at mainbus0 # sun4
sparcvme0 at mainbus0 # sun4
iommu0 at mainbus0 # sun4m
sbus0 at iommu0 # sun4m
vme0 at iommu0 # sun4m
sparcvme0 at iommu0 # sun4m
## SBus expander box
xbox* at sbus? slot ? offset ?
@ -308,11 +308,11 @@ scsibus* at isp?
## 0x04 Allow disconnect/reselect
##
## E.g. the following would enable DMA, interrupts, and reselect:
## si0 at vme0 addr 0x200000 level 3 vect 0x40 flags 0x07
## si0 at sparcvme0 addr 0x200000 irq 3 vect 0x40 flags 0x07
##
## By default, DMA is enabled in the driver.
si0 at vme0 addr 0x200000 pri 2 vec 0x40
si0 at sparcvme0 addr 0x200000 irq 2 vect 0x40
scsibus* at si?
## NCR5380-based "SCSI Weird" on-board SCSI interface found
@ -341,16 +341,16 @@ uk* at scsibus? target ? lun ? # unknown SCSI
## Xylogics 753 or 7053 VME SMD disk controllers and disks, found
## on sun4 systems.
xdc0 at vme0 addr 0xee80 pri 3 vec 0x44
xdc1 at vme0 addr 0xee90 pri 3 vec 0x45
xdc2 at vme0 addr 0xeea0 pri 3 vec 0x46
xdc3 at vme0 addr 0xeeb0 pri 3 vec 0x47
xdc0 at sparcvme0 addr 0xee80 irq 3 vect 0x44
xdc1 at sparcvme0 addr 0xee90 irq 3 vect 0x45
xdc2 at sparcvme0 addr 0xeea0 irq 3 vect 0x46
xdc3 at sparcvme0 addr 0xeeb0 irq 3 vect 0x47
xd* at xdc? drive ?
## Xylogics 451 or 451 VME SMD disk controllers and disks, found
## on sun4 systems.
xyc0 at vme0 addr 0xee40 pri 3 vec 0x48
xyc1 at vme0 addr 0xee48 pri 3 vec 0x49
xyc0 at sparcvme0 addr 0xee40 irq 3 vect 0x48
xyc1 at sparcvme0 addr 0xee48 irq 3 vect 0x49
xy* at xyc? drive ?
@ -408,10 +408,10 @@ le* at lebuffer? # SBus
## or on a Multibus/VME card.
ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board
ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board
ie1 at vme0 addr 0xe88000 pri 3 vec 0x75 # VME
ie2 at vme0 addr 0x31ff02 pri 3 vec 0x76 # VME
ie3 at vme0 addr 0x35ff02 pri 3 vec 0x77 # VME
ie4 at vme0 addr 0x2dff02 pri 3 vec 0x7c # VME
ie1 at sparcvme0 addr 0xe88000 irq 3 vect 0x75 # VME
ie2 at sparcvme0 addr 0x31ff02 irq 3 vect 0x76 # VME
ie3 at sparcvme0 addr 0x35ff02 irq 3 vect 0x77 # VME
ie4 at sparcvme0 addr 0x2dff02 irq 3 vect 0x7c # VME
## qec/be, qec/hme
qec* at sbus? slot ? offset ?
@ -494,7 +494,7 @@ bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot
bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot
## Sun "cgtwo" VME color framebuffer
cgtwo0 at vme0 addr 0x400000 pri ? vec 0xa8
cgtwo0 at sparcvme0 addr 0x400000 irq ? vect 0xa8
## Sun "cgthree" Sbus color framebuffer
cgthree0 at sbus? slot ? offset ?

View File

@ -1,4 +1,4 @@
# $NetBSD: files.sparc,v 1.78 1999/06/30 15:18:58 drochner Exp $
# $NetBSD: files.sparc,v 1.79 1999/07/28 05:45:50 christos Exp $
# @(#)files.sparc 8.1 (Berkeley) 7/19/93
# sparc-specific configuration info
@ -19,7 +19,7 @@ device obio { [addr = -1], [level = -1] }
attach obio at mainbus
include "dev/vme/files.vme"
device sparcvme: vmebus
device sparcvme: vme
attach sparcvme at mainbus with vme_mainbus
attach sparcvme at iommu with vme_iommu