811c50e72e
Fix typo.
1994-02-16 20:22:04 +00:00
c540418d24
Use IFF_ALLMULTI correctly.
1994-02-16 20:15:18 +00:00
04a992fa41
Add copyright notices.
1994-02-16 19:28:19 +00:00
a25bda954d
Finish 507 probe routine.
1994-02-16 19:04:41 +00:00
1a8d283a97
Move elink_reset() into a separate file, and add a generic elink_idseq().
1994-02-16 17:59:11 +00:00
19219795da
Add common reset function so if_ep and if_ie don't reset each-other.
...
(this is a 3commonality)
1994-02-16 07:26:50 +00:00
e0b1614dc7
Remove some dead code.
1994-02-16 03:03:46 +00:00
499efbcbdd
More KNF-like.
1994-02-16 02:41:10 +00:00
4335fa14b3
Increase the timeout for start_unit.
1994-02-16 00:47:35 +00:00
fd3fc1deb4
get sense of two comparisons right. from Chris Hopps <chopps@lamp>
1994-02-16 00:09:39 +00:00
3ecfc99ae9
Make epsendidseq() look less like it was transliterated from assembler.
1994-02-15 22:57:09 +00:00
2670ac57bc
Pull from magnum branch. The way this driver does multicast is somewhat
...
bogus.
1994-02-15 20:56:51 +00:00
79b447f626
Hack to make this closer to new config.
1994-02-15 19:37:12 +00:00
692010351e
Remove imbedded RCS logs.
1994-02-15 15:08:24 +00:00
ccba59071a
Make the multicast filter calculation identical to what will be in if_is.c.
1994-02-14 23:56:16 +00:00
94b2718bd1
PARANOID --> DIAGNOSTIC for inexpensive tests.
1994-02-14 21:43:33 +00:00
b52fc7e2d9
Pedantism. Should delay after stopping Coax xcvr.
1994-02-14 03:50:09 +00:00
8312c9cc62
missing spl's
1994-02-14 02:09:31 +00:00
551478ad4a
Don't save runt or errored packets. These are almost always `normal', and we
...
really can't deal with them anyway.
1994-02-13 05:44:39 +00:00
b0c5083b46
Format police.
1994-02-13 04:12:03 +00:00
754f02f1c2
Correct spelling errors.
1994-02-13 03:49:24 +00:00
6839509d86
Support for several new cards pulled from magnum branch.
...
Format police.
1994-02-12 07:16:24 +00:00
b8e893f885
Add proc arg to wdioctl() proto.
1994-02-11 04:44:30 +00:00
9638fd585a
Nuke if_init.
1994-02-10 17:17:56 +00:00
2f62d06c05
Back pointers are not useful for disksort().
1994-02-10 15:17:34 +00:00
bbb3e7618c
All ioctl routines take a struct proc * now.
1994-02-09 21:06:46 +00:00
7ce014f038
Clean up multicast code; part from magnum branch, and part from Brad Parker
...
<brad@fcr.com>. A couple of other nits.
1994-02-08 03:06:20 +00:00
57892d4faf
Remove another use of b_actl.
1994-02-06 17:39:48 +00:00
adeebc448e
Use b_actf, not av_forw.
1994-02-06 10:00:30 +00:00
42e64dc254
Remove another use of b_actl.
1994-02-06 08:01:45 +00:00
b648f43dfd
Fix UTP enabling/disabling.
1994-02-04 02:06:04 +00:00
d7038296be
Multicast is no longer optional.
1994-02-02 05:58:50 +00:00
4ecdacf90d
Add scsi_stop_unit(), from Mac code. Other minor nits.
1994-02-01 20:05:19 +00:00
ee0e2912f4
Better (explicitly) return something from probe when nothing found
1994-02-01 17:22:22 +00:00
73f7c1d72e
oops
1994-02-01 04:38:03 +00:00
b452451cfe
new cons.h location, etc.
1994-02-01 03:42:08 +00:00
f1ab8b020a
new location of cons.h
1994-02-01 03:35:06 +00:00
18673da28a
Traditional behaviour is to reset all modes if device isn't open already
1994-01-30 16:41:27 +00:00
5235180083
Fix spelling error in Copyright notice
1994-01-28 23:43:26 +00:00
a609854c88
cleanup
1994-01-28 10:36:59 +00:00
b632ec18c0
don't go boom in the presence of stray interrupts
1994-01-28 03:40:18 +00:00
da816a79ea
make behaviour with constty consistent, deal properly with the case
...
where there's no console, and set things up so that this can be made
'shared' eventually. look at diffs for exact changes.
1994-01-27 07:55:44 +00:00
8803fd0388
if CN_REMOTE, don't redirect output. this file needs some help,
...
but now at least i'm thinking about it again.
1994-01-27 05:30:38 +00:00
33a902a405
can't use m_pkthdr.len yet, *sigh*
1994-01-25 10:46:29 +00:00
894bb31ed1
print nice numbers for disks >2G. from <adrian@lemmings.cursci.com>
1994-01-25 08:56:45 +00:00
9bea6007cc
This makes my soundblaster work.
1994-01-25 05:00:14 +00:00
f030a34a09
ether_input() takes a network byte order ether_type now
1994-01-24 00:17:16 +00:00
12bc16798e
protos, cleanup spl's, bpf receive side code, check for large packets,
...
various other fixes.
1994-01-23 07:57:50 +00:00
80f5666771
If SCSI_DEBUG is on, a structure member wasn't updated from adapter_unit
...
to scsibus.
1994-01-22 14:16:58 +00:00
2eb7e135f7
From the knights that go "nit".(Tom Bishop <bishop@lear.bos.locus.com>)
1994-01-21 21:35:58 +00:00
f3307888b5
cleaned up some warnings
1994-01-21 06:26:00 +00:00
07fd779cd0
delete contents; can't appear in trunk until copyright is fixed.
1994-01-21 05:11:07 +00:00
33a067f307
Junk comselect(); it's the same at ttselect().
1994-01-13 14:58:12 +00:00
7e32102eda
We are simply not ready to use pkthdr.len yet.
1994-01-12 04:12:10 +00:00
47f759bc3c
Use pkthdr.len field.
1994-01-12 02:58:26 +00:00
cfdaa9d2ea
Use the pkthdr.len field rather than traversing the mbuf chain. Also put some
...
sanity checking code in, #ifdef DEBUG, just in case.
1994-01-12 02:38:17 +00:00
efdb9fa688
*strategy functions return void.
1994-01-11 17:19:37 +00:00
3f787778b2
LBL /dev/audio and soundblaster drivers, as ported by brad@fcr.com.
...
both should work with both old- and new-config i386 trees.
Some notes:
bsd_audio.c has dependencies on the soundblaster. This should
be fixed, so that it can be used for the PC speaker
(when its driver has been modified), as well.
sb.c needs some cleanup, and will have sections trimmed, eventually
(when new config becomse standard for i386). additionally,
the SBPro support needs some cleanup.
1994-01-09 19:35:00 +00:00
489e12a1a7
small cleanup
1994-01-05 13:38:57 +00:00
92d7ef960c
Use KERNBASE, not 0xfe000000.
1994-01-03 23:53:29 +00:00
664f968d53
Inline all the [lr]cr[023]() `functions' in cpufunc.h.
1994-01-03 16:23:06 +00:00
c0e772492e
Inline all the [lr]cr[023]() `functions' in cpufunc.h.
1994-01-03 16:21:48 +00:00
778a3db3d0
Correct dumping to WD (was destroyed by MACHINE_NONCONTIG code)
1993-12-24 13:56:14 +00:00
f59a5e6fcd
fix from Nick Cuccia (cuccia@remarque.berkeley.edu), apparently
...
originating from Gary Grebus <glg@k8lt.ampr.org>: partition size
must be in units of DEV_BSIZE.
1993-12-23 09:35:51 +00:00
e9a8e9c41d
fix that last
1993-12-21 06:01:32 +00:00
fc69cb8898
Tweak for BSD44/NetBSD environ.
1993-12-21 05:24:31 +00:00
e678ab8242
vnode driver (from Mike Hibler make@cs.utah.edu)
1993-12-21 04:17:02 +00:00
ddefd2e1b8
Fixed bug where with two or more SCSI controllers of the same type, you
...
could not have devices at the same ID on each bus.
This patch not directly applicable to magnum branch, which is using Julian's
new SCSI code.
1993-12-20 23:27:28 +00:00
6cbf9be7da
Use cpufunc.h only where (currently) needed.
1993-12-20 09:11:38 +00:00
f2a0b4b335
Canonicalize all #includes, and add pio.h where appropriate.
1993-12-20 09:05:17 +00:00
b4d3382694
Canonicalize all #includes.
1993-12-17 07:56:32 +00:00
ea13c12adc
From magnum branch:
...
Remove Jolitz's netisr kluge. Make sure cpl == 0 really means base priority.
Other minor cleanup.
1993-12-17 00:10:06 +00:00
8ab45ada42
Eliminate reference to Maxmem.
1993-12-16 20:22:56 +00:00
b4b8e47e12
IFF_LLC0->IFF_LINK0
1993-12-16 20:14:10 +00:00
4eef2bd5ca
oh my... make NS work.
...
(mental note to check more thoroughly in future)
1993-12-16 04:29:07 +00:00
32fa8934ac
Octal; Hex... It's all the same... :-)
...
>From deaven@ishmael.ameslab.gov
1993-12-16 00:40:05 +00:00
6c404098c1
Rearrange some tests to improve efficiency a little when using BPF and
...
multicast at the same time.
1993-12-15 03:01:07 +00:00
e870ded5c4
Driver for 3Com Etherlink-III (3c509) written by me. Kudos to Charles
...
and Theo for help and optimizations. (without which this driver would
never have achieved speeds of 1010KB/sec)
1993-12-14 04:26:45 +00:00
31a8c70935
0xfe000000 --> KERNBASE
1993-12-13 11:50:13 +00:00
55a9a547a2
from Soeren Schmidt <sos@login.dkuug.dk>:
...
Basically it does a timeout on lost interrupts, starting the operation
again and logging and error message on the console.
additionally fixes some of the (newer ending) while loops
(that made it work with two IDE disks !)
1993-12-13 10:16:56 +00:00
ac0c68e1db
ie. also pass up any packet with the multicast bit set in the ethernet
...
>From: Havard Eidnes <Havard.Eidnes@runit.sintef.no>
1993-12-12 20:24:37 +00:00
0e5dbe1a22
IF_LLC0 -> IF_LINK0
1993-12-10 10:57:40 +00:00
dc1b697fb8
More multicast stuff
...
>From cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-10 05:37:33 +00:00
9a48e42157
__386BSD__ -> __NetBSD__
1993-12-07 12:51:58 +00:00
8caf0ca62b
Use new struct buf fields.
1993-11-29 20:33:25 +00:00
5820418cb2
Remove remaining sleep()s.
1993-11-27 19:49:09 +00:00
8cd6aec465
Patch from Julian to fix hangage when opening a device multiple times.
1993-11-25 04:03:20 +00:00
e985f4041a
Still under construction...
1993-11-24 09:45:04 +00:00
37548328a1
Under construction...
1993-11-24 04:52:44 +00:00
7abca02b8a
added two copyright strings at the request of Gary Clark II
...
<gclarkii@freefall.cdrom.com>, because he hacked and is in the process
of hacking the code significantly.
1993-11-17 12:22:50 +00:00
2f5635f70b
A slightly unfinished i82586 driver, based on Garrett Wollman's.
1993-11-08 20:15:31 +00:00
ab12bacae0
note that use of splnone() is prolly bogus; splnone() itself is bogus,
...
so it's use is. 8-)
1993-11-05 23:18:04 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
0f926f7b02
ttyfree() bugfix edition, plus various minor tweaks.
1993-10-29 08:58:34 +00:00
08f5f6a6fa
Add MADDRUNK.
1993-10-26 12:16:35 +00:00
16a520e7ed
* Revision 2.11 1993/10/23 04:21:03 davidg
...
* Novell probe changed to be invasive because of too many complaints
* about some clone boards not being reset properly and thus not
* found on a warmboot. Yuck.
*
* Revision 2.10 1993/10/23 04:07:12 davidg
* increment output errors if the device times out (done via watchdog)
*
* Revision 2.9 1993/10/23 04:01:45 davidg
* increment input error counter if a packet with a bad length is
* detected.
*
* Revision 2.8 1993/10/15 10:59:56 davidg
* increase maximum time to wait for transmit DMA to complete to 120us.
* call ed_reset() if the time limit is reached instead of trying
* to abort the remote DMA.
*
* Revision 2.7 1993/10/15 10:49:10 davidg
* minor change to way the mbuf pointer temp variable is assigned in
* ed_start (slightly improves code readability)
*
* Revision 2.6 93/10/02 01:12:20 davidg
* use ETHER_ADDR_LEN in NE probe rather than '6'.
1993-10-23 04:59:41 +00:00
3810963ed5
Add at_setup_dmachan(). Minor cleanup.
1993-10-22 20:24:14 +00:00
7620c96e5d
Make atdevbase an int.
1993-10-17 14:03:54 +00:00
6067dc9ea8
Minor cleanup.
1993-10-17 05:34:23 +00:00
2ce6de16d5
Add isa_establish(), for all it's worth (which is to say, nothing).
1993-10-16 05:25:21 +00:00
c73d85d341
Panic if DMA with odd length attempted on a 16-bit channel.
1993-10-16 03:55:59 +00:00
56cc97cb80
update from rick, tarfile of Oct 11 10:46
1993-10-15 02:56:33 +00:00
4f94812b29
New file with DMA code from isa.c, modified to check for some errors.
1993-10-14 05:22:57 +00:00
63a052d489
fixed two icky rcs-log's.
1993-10-12 03:48:52 +00:00
fe806afec2
pmax code from <ralphc@pyramid.com> & <rick@snowhite.cis.uoguelph.ca>
1993-10-12 03:22:19 +00:00
e9b92335b0
Add DRQUNK and IOBASEUNK.
1993-10-06 12:09:25 +00:00
e256404adc
Cyclades Cyclom-{4/8/16}Y multiport async serial board driver.
1993-10-06 09:30:16 +00:00
13a48b8263
Goes with the new cy driver.
1993-10-06 09:27:27 +00:00
892a4681ae
* Revision 2.5 93/09/30 17:44:14 davidg
...
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
* a hardware bug in cheap WD clone boards where the PROM checksum
* byte is always zero
*
* Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
* with some NE boards where the 8390 doesn't reset properly on
* power-up. Remove initialization of IMR/ISR in the NE probe
* because this is inherent in the reset.
*
* Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
*
* Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
*
* Revision 2.1 93/09/29 12:32:12 davidg
* changed multi-buffer count for 16bit 3c503's from 5 to 2 after
* noticing that the transmitter becomes idle because of so many
* packets to load.
*
* Revision 2.0 93/09/29 00:00:19 davidg
* many changes, rewrites, additions, etc. Now supports the
* NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
* a variety of similar clones. 16bit 3c503 now does multi
* transmit buffers. Nearly every part of the driver has
* changed in some way since rev 1.30.
1993-10-01 02:01:43 +00:00
4a21fe3648
ifdef out the ttyfree()'s, so that fill_eproc doesn't panic when
...
a process's session still holds a ref to a tty which has been deallocated
and reused.
1993-09-29 02:36:21 +00:00
b85a24ec4e
get rid of stray printfs (turn them into "lprintf"s)
1993-09-28 21:26:59 +00:00
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
1c880d62bf
As of this revision, all known bugs have been fixed. Some of the fixes include:
...
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 09:40:56 +00:00
0535b6089e
Avoid clash of struct ns_addr with #define ns_addr.
1993-09-06 18:30:39 +00:00
4475f55d8f
Include systm.h to get prototypes (and possibly inlines) of *max functions.
1993-09-04 00:02:48 +00:00
9aed375ba3
tty XXstart() routines return void
1993-08-29 13:46:31 +00:00
62164fe535
Add find_isadev() and have sysbeep() use common defines.
1993-08-28 00:13:00 +00:00
225917bfe6
0.9 "official" patch 001:
...
(1) added support for ed1 in both generic kernels at:
device ed1 at isa? port 0x250 net irq 9 iomem 0xd8000 vector edintr
(2) brought if_ed.c up to DG's 1.19 rev.
1993-08-26 00:26:50 +00:00
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
e5ea45d312
there are some devices out there which use... NO I/O PORTS!
1993-08-08 09:54:23 +00:00
67dfce6728
Normalize play_msf changes with 386bsd patch.
1993-08-04 19:33:44 +00:00
80a965ba28
Add play_msf command and MSF variants. This is SCSI2 stuff and is needed for many flavors of player utilities.
1993-08-04 17:26:20 +00:00
4a385c1228
with -Wall would bomb, on incomplete type 'selinfo'. bpfilter.h include
...
moved down, and select.h included.
1993-08-03 01:52:57 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
8141ce5d83
kill damned RCS Log
1993-07-19 16:58:20 +00:00
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
30c2a20262
patches from allen briggs to fix a minor bug in *attach()
1993-07-19 11:30:49 +00:00
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
cb880ccb94
fix evil interaction with new physio; don't set error bit for short reads.
1993-07-09 04:28:55 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
7afa674eb4
the "struct tty *cn_tty" field in cons.c wasn't being used by anything
1993-07-07 11:12:26 +00:00
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
44b5013862
Reject non block-aligned transfers (where a block is 512 bytes in length);
...
they were causing scsi controller lockups. Replace an occurrence of "512"
with SECSIZE, which is #defined to be 512.
1993-07-04 07:09:59 +00:00
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
mycroft